Jump to content
fantomas1

[pre-release] macOS High Sierra

3,845 posts in this topic

Recommended Posts

trackpad is empty with rehabman's vodoops2controller.kext. My wifi bcm9352 works thanks darkvoid and my brightness works. My computer is a MSI Laptop broadwell 5700hq.

Depending on your touchpad i use ApplePS2SmartTouchPad.kext and it works with High Sierra.

Share this post


Link to post
Share on other sites
Advertisement

I made a time machine already, but I have nothing to lose so I want to update directly. So it take 1 hour of your time and you can get pass for this, right? I'm using a Samsung SSD and 3.0 USB, so I don't think the speed is slow like this.

Tried with ssd and it's the same, I thing drivers for sata is the problem.

 

Sent from my HTC One M9 using Tapatalk

Share this post


Link to post
Share on other sites

Tried with ssd and it's the same, I thing drivers for sata is the problem.

 

Sent from my HTC One M9 using Tapatalk

I also tried to install new fresh 10.12.5 and update to HS but i got the same issue, stuck at blue/grey screen :))

Share this post


Link to post
Share on other sites

I also tried to install new fresh 10.12.5 and update to HS but i got the same issue, stuck at blue/grey screen :))

If you really want to install let it with that screen for one hour but I recommend you to wait for beta 2

 

Sent from my HTC One M9 using Tapatalk

Share this post


Link to post
Share on other sites

If you really want to install let it with that screen for one hour but I recommend you to wait for beta 2

 

Sent from my HTC One M9 using Tapatalk

Gosh. I didn't wait that long and restart. Haha, don't know it would take so long there.

Share this post


Link to post
Share on other sites

Gosh. I didn't wait that long and restart. Haha, don't know it would take so long there.

Don't know man, I think it's a problem with some motherboards, hope will be fixed in next beta.

 

Sent from my HTC One M9 using Tapatalk

Share this post


Link to post
Share on other sites

I installed High Sierra on an empty SSD formatted as APFS. It mounts and boots fine, but when Clover is scanning for entries it shows me
 

nx_dev_init:705: Warning: superblock indicates jumpstart record but this driver was not loaded from that partition
container_kb_get:544: Invalid on disk range pr_start_paddr 0 pr_block_count 0
keybag_operation:353: missing APFS/Container keybag (2)
apfs_keybag_get:831: Failed to get apfs volume keybag, err = 2
er_state_obj_get_for_recovery:3539: No ER state object - rolling is not happening, nothing to recover
APFSStart:1132: Mounting with apfs_efi_osx-621.0.0.1.32
efi_container_create:795: -efi_container_create, Status = 0000000000000007

and macOS is showing me the exact same thing in verbose mode. Anyone else with this issue or is it normal?

Share this post


Link to post
Share on other sites

If you really want to install let it with that screen for one hour but I recommend you to wait for beta 2

 

Sent from my HTC One M9 using Tapatalk

So I'll try to wait for it in 1hour tonight :))

I found another topic with the same issue, he uses a firmwarefeature and get successful but it didn't work for me. Still stuck at grey screen.

Share this post


Link to post
Share on other sites

AppleALC with desktop Intel HD Graphics 630 (Kaby Lake) HDMI audio support for ig-platform-id 0x59120000. 

Tested on i7-7700 with Asus Maximus VIII Hero connection through HDMI cable. Work.

https://github.com/vit9696/AppleALC/commit/d2ed5a333c038939a2305aa67caf3168d4e2a193

 

Here is prebuild binary...

AppleALC_KBL.kext.zip

Share this post


Link to post
Share on other sites

AppleALC with desktop Intel HD Graphics 630 (Kaby Lake) HDMI audio support for ig-platform-id 0x59120000.

Tested on i7-7700 with Asus Maximus VIII Hero connection through HDMI cable. Work.

https://github.com/vit9696/AppleALC/commit/d2ed5a333c038939a2305aa67caf3168d4e2a193

 

Here is prebuild binary...

attachicon.gifAppleALC_KBL.kext.zip

Hello.

I have a question. Does hd630 have sleep issue after wakeup? Skylake desktop hd530 has sleep issue. I wonder work or not

 

Thanks in advance

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

Hello.

I have a question. Does hd630 have sleep issue after wakeup? Skylake desktop hd530 has sleep issue. I wonder work or not

 

Thanks in advance

 

나의 LG-F800S 의 Tapatalk에서 보냄

 

In 10.13 some users on applelife.ru report normal wake from sleep on HD530. My PC in signature also have normal wake first time after reboot, but after second sleep black screen. HD630 have same issue :(

Share this post


Link to post
Share on other sites

In 10.13 some users on applelife.ru report normal wake from sleep on HD530. My PC in signature also have normal wake first time after reboot, but after second sleep black screen. HD630 have same issue :(.

Still have issue. Bad news .. Thanks

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

I'm using APFS drivers to start high sierra but it's slow and also the recovery is missing from clover options

In verbose mode, it slow when those line goes:

 

attachicon.gifIMG_0112.PNG

 

Experiencing the same problem. Have you got a fix yet? 

Share this post


Link to post
Share on other sites

AppleALC with desktop Intel HD Graphics 630 (Kaby Lake) HDMI audio support for ig-platform-id 0x59120000. 

Tested on i7-7700 with Asus Maximus VIII Hero connection through HDMI cable. Work.

https://github.com/vit9696/AppleALC/commit/d2ed5a333c038939a2305aa67caf3168d4e2a193

 

Here is prebuild binary...

attachicon.gifAppleALC_KBL.kext.zip

 

Will this work with 10.12.5 or do i need 10.13

Share this post


Link to post
Share on other sites

Yes! It will work in 10.12.x :)

 

Cool man thanks a lot will test tonight and report back ...... The only thing that i`m missing is HDMI audio and really need it bc its an HTPC build... Hopefully this will solve my issues 

Share this post


Link to post
Share on other sites

I installed High Sierra on an empty SSD formatted as APFS. It mounts and boots fine, but when Clover is scanning for entries it shows me

 

nx_dev_init:705: Warning: superblock indicates jumpstart record but this driver was not loaded from that partition
container_kb_get:544: Invalid on disk range pr_start_paddr 0 pr_block_count 0
keybag_operation:353: missing APFS/Container keybag (2)
apfs_keybag_get:831: Failed to get apfs volume keybag, err = 2
er_state_obj_get_for_recovery:3539: No ER state object - rolling is not happening, nothing to recover
APFSStart:1132: Mounting with apfs_efi_osx-621.0.0.1.32
efi_container_create:795: -efi_container_create, Status = 0000000000000007

and macOS is showing me the exact same thing in verbose mode. Anyone else with this issue or is it normal?

 

I'm getting pretty much the same thing.  It happens before the Clover menu loads.  Here's what I get:

 

post-270804-0-05456200-1497551593_thumb.jpg

Share this post


Link to post
Share on other sites

I was missing the ability to tap to click and, like everyone else, my trackpad prefpane was empty when I went into System Preferences.  I remember having this problem when Sierra first came out and there was a fix for it.  I tried to do the same fix using Sierra and High Sierra and it didn't work.  But I found an old version of RehabMan's VoodooPS2Controller.kext that was forked by usr-sse2 (I think it was him.)  However, it has the modern preferences and they open in High Sierra.  It's not perfect.  It appears to add a copy of the Trackpad.pref to User/Library/PreferencePanes in addition to the one in System/Library/PreferencePanes.  I deleted the extra one with no ill-effect.  Also, the settings have to be set even if it looks like they are selected when I first open the prefpane.  I need to unclick and reclick each setting that I want selected.  Lastly, there are keyboard functions that DO NOT work with this version, such as zoom (Ctrl-Scroll Up) or alt-T to open a new tab in Sierra.  If anyone wants the advanced settings for their PS2 trackpad, here's a start:

 

VoodooPS2Controller.kext.zip

 

post-270804-0-40627000-1497577305_thumb.png

Share this post


Link to post
Share on other sites

Yes! It will work in 10.12.x :)

Well I tried using the kext and the ig-platform-id 0x59120000 and i lost graphics acceleration ....... and still no hdmi sound is there something else i may be missing i have a fake id on the cpu and the graphics tho

Share this post


Link to post
Share on other sites

I was missing the ability to tap to click and, like everyone else, my trackpad prefpane was empty when I went into System Preferences.  I remember having this problem when Sierra first came out and there was a fix for it.  I tried to do the same fix using Sierra and High Sierra and it didn't work.  But I found an old version of RehabMan's VoodooPS2Controller.kext that was forked by usr-sse2 (I think it was him.)  However, it has the modern preferences and they open in High Sierra.  It's not perfect.  It appears to add a copy of the Trackpad.pref to User/Library/PreferencePanes in addition to the one in System/Library/PreferencePanes.  I deleted the extra one with no ill-effect.  Also, the settings have to be set even if it looks like they are selected when I first open the prefpane.  I need to unclick and reclick each setting that I want selected.  Lastly, there are keyboard functions that DO NOT work with this version, such as zoom (Ctrl-Scroll Up) or alt-T to open a new tab in Sierra.  If anyone wants the advanced settings for their PS2 trackpad, here's a start:

 

attachicon.gifVoodooPS2Controller.kext.zip

 

attachicon.gifUntitled.png

I use SmartTouchpad v4.7 beta 5 from EMlyDinEsH without any issues. Supports Elan, Synaptics and FocalTech

Share this post


Link to post
Share on other sites

I use SmartTouchpad v4.7 beta 5 from EMlyDinEsH without any issues. Supports Elan, Synaptics and FocalTech

 

I was prepared to really like your kext.  It loaded just fine from Clover/kexts.  It had quite a bit of log entries when I booted in verbose mode but it wasn't too bad.  It worked great when I booted up and the preference pane loaded perfectly.  However, twice, within 10 minutes of normal use, the trackpad froze on me and I had to plug in a USB mouse in order to reboot.  Also, I lost my custom key bindings that I had added to my DSDT to control screen brightness.

 

I suspect that this kext works better for Elan trackpads than Synaptics.  That's just my hunch.  In any event, I went back to RehabMan's most current VoodooPS2Controller.kext and, because I had set the advanced settings with the kext I posted above, those settings had been saved so I now have click-to-tap even though there is no preference pane that allows me to select that option.

 

I will keep an eye on the SmartTouchpad kext.  I think it is a good driver for the right hardware and may still work better on my laptop in the future.  Thanks.

Share this post


Link to post
Share on other sites

Well I tried using the kext and the ig-platform-id 0x59120000 and i lost graphics acceleration ....... and still no hdmi sound is there something else i may be missing i have a fake id on the cpu and the graphics tho

You need special build 10.12.5 16F2073... It have native Kaby Lake support. So you don't need fakeid or something else. Also your graphics should be injected with Arbitrary array and Graphics->Inject->Intel should be "false".

For installing 16F2073 download update https://support.apple.com/kb/DL1921?locale=en_US

Change in /System/Library/CoreServices/SystemVersion.plist ProductBuildVersion to 16F2073

post-1069282-0-61167000-1497593059_thumb.png

Reboot. Install update.

Then make changes in config.plist for Kaby Lake CPU and Graphics:

- delete FakeCPUID (use # before FakeCPUID) and also delete FakeID for IntelGFX (use # before IntelGFX)

post-1069282-0-22038700-1497593783_thumb.pngpost-1069282-0-74708900-1497594030_thumb.png

- Use Graphics_>Inject->Intel="false"

post-1069282-0-54654100-1497593452_thumb.png

- Inject graphics with Arbitrary array

post-1069282-0-20905400-1497593513_thumb.png

 

Add in EFI/Clover/Kexts/Other latest versions of Lilu.kext + IntelGraphicsFixup.kext and also add my AppleALC with Kaby Lake HDMI audio support.

Share this post


Link to post
Share on other sites

I was prepared to really like your kext. It loaded just fine from Clover/kexts. It had quite a bit of log entries when I booted in verbose mode but it wasn't too bad. It worked great when I booted up and the preference pane loaded perfectly. However, twice, within 10 minutes of normal use, the trackpad froze on me and I had to plug in a USB mouse in order to reboot. Also, I lost my custom key bindings that I had added to my DSDT to control screen brightness.

 

I suspect that this kext works better for Elan trackpads than Synaptics. That's just my hunch. In any event, I went back to RehabMan's most current VoodooPS2Controller.kext and, because I had set the advanced settings with the kext I posted above, those settings had been saved so I now have click-to-tap even though there is no preference pane that allows me to select that option.

 

I will keep an eye on the SmartTouchpad kext. I think it is a good driver for the right hardware and may still work better on my laptop in the future. Thanks.

Yeah it works great for me. Volume keys work without mods and brightness keys is an easy dsdt patch. Maybe try an earlier version? Or just stick with what works ;-)

 

I'm reinstalling all os on my laptop at the moment as I couldn't boot windows and macOS would load but nothing would work, like no apps would open etc... only happened since I upgraded to high sierra. Windows would stall at b1 initialize library failed 0xc00000bb

 

Sent from my SM-G930F using Tapatalk

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By End3rPower50
      Hi, I want to install MacOS Catalina on my laptop.
      I was installed MacOS Mojave previously but i had a lot of problem, for example my wifi's card (Dell DW1820A) had a problem: My pc sometimes doesn't boot up or pc after some minutes crashed or slowed. 
      Now i want to try again to install macOS.
       
      this is my spec: 
      HP 15-AY034NL 
      CPU: i7 6500U  with HD520
      SSD: 500GB SSD Samsung
      Wifi & Bluetooth: Dell DW1820A (Bluetooth: BCM2045A0) (Wifi: BCM94350ZAE)
      USB 3.0 
      Ethernet: Realtek 8100
       
      Attached in this thread, my old clover configuration created by me (CLOVER OLD) and clover with Wifi driver (CLOVER) created by Hervè (I had asked help at insanelymac's community)
       
      P.S SORRY FOR MY BAD ENGLISH.
      Thanks in advance 
      -ANTONIO
      CLOVER OLD.zip
      CLOVER.zip
    • By fantomas1
      Developers are being given a preview version of macOS Catalina today and a public beta will be available this summer (in July).
      The final version will be available to the general public in the fall.

      View full article
    • By fantomas1
      Developers are being given a preview version of macOS Catalina today and a public beta will be available this summer (in July).
      The final version will be available to the general public in the fall.
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/forum/download/file.php?id=25033
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/download/file.php?id=24376
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By fusion71au
      This is a brief guide on how to create a vanilla El Capitan (also same process for Sierra) OS X Installer USB with an updated prelinked kernel containing FakeSMC.

      It is tailored for those users who want to understand the “nuts and bolts” of how to create an installer and also to help brush up on their terminal skills (rather than have one made for them with the numerous automated “tools” available or even Apple’s createinstallmedia) :
       
       
      Specifically, it is also a “Proof of Concept” which shows that installation is possible without even having to rely on boot loader kext injection.

      Prerequisites
      Existing Yosemite installation (or Mavericks - see post#4 for steps 7,8) “Install OS X El Capitan.app" downloaded to the Applications folder Pacifist FakeSMC.kext - Slice or Kozlek branch Bootloader - Clover or Chameleon 8GB or larger USB drive (16GB recommended), formatted HFS+ (MBR or GUID) named “Installer”  
      Procedure
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Open OS X terminal and type the following lines, followed by <Enter> after each line.
          The image restore and file copying may take a while to complete, and at the end of the process, the Installer volume is renamed to “OS X Base System"....
       
      sudo -s hdiutil attach /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/SharedSupport/InstallESD.dmg asr restore -source /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg  -target /Volumes/Installer -erase -format HFS+ -noprompt -noverify rm /Volumes/OS\ X\ Base\ System/System/Installation/Packages cp -av /Volumes/OS\ X\ Install\ ESD/Packages /Volumes/OS\ X\ Base\ System/System/Installation cp -av /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg /Volumes/OS\ X\ Install\ ESD/BaseSystem.chunklist /Volumes/OS\ X\ Base\ System diskutil unmount /Volumes/OS\ X\ Install\ ESD exit 3.  Right click on the “OS X Base System” Volume and click “Get Info”
       

      4.  Click on the lock icon and untick “Ignore ownership on this volume”
       

      5.  Extract/Copy the El Capitan Kernels folder into /System/Library/ of the USB with Pacifist.  NB It is found in the "Essentials.pkg" in /System/Installation/Packages
       

      6.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel —> OG.prelinkedkernel
       

      7.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of the installer USB using Finder.
       

      8.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel…..
       
      sudo -s chmod -R 755 /Volumes/OS\ X\ Base\ System/Library/Extensions chown -R 0:0 /Volumes/OS\ X\ Base\ System/Library/Extensions touch /Volumes/OS\ X\ Base\ System/System/Library/Extensions kextcache -u /Volumes/OS\ X\ Base\ System exit Any errors should be noted but the output below is normal e.g.


      9. Install your Bootloader targeting the OS X Base System volume
       
       
       
       
      10.  Boot your system with the USB without injected kexts into the OS X Installer GUI....
       
       
       
       
       
      Post Install
      The original prelinked kernel in a fresh install of El Capitan will also lack FakeSMC ie it will only be linked to Apple signed kexts.  In order to boot into El Capitan the first time around without boot loader kext injection, the PLK needs to be rebuilt for the El Capitan volume like we did for the installer:
       
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel for the El Capitan volume —> OG.prelinkedkernel
      3.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of El Capitan using Finder
      4.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel.  In this example, the El Capitan volume is named "El_Capitan" - change if you have named it something else...
      sudo -s chmod -R 755 /Volumes/El_Capitan/Library/Extensions chown -R 0:0 /Volumes/El_Capitan/Library/Extensions touch /Volumes/El_Capitan/System/Library/Extensions kextcache -u /Volumes/El_Capitan exit 5. Install your Bootloader targeting the El Capitan volume.  This step is only necessary if you are installing El Capitan on a new drive without existing boot loader (not required if installing on a disk with existing boot loader beside Yosemite).
      6. Reboot your system without injected kexts into El Capitan!
       
       
      Other links
      The All-In-One Guide to Vanilla OS X for beginners
       
      Updates for Sierra and High Sierra   Custom Prelinkedkernel Generator Tool I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan.  Instructions:   1.  Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder.   2.  Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled. 3.  Copy BaseSystem.dmg to ~/Downloads/BaseSystem  4.  Open terminal and run the following commands... cd ~/Downloads/BaseSystem chmod +x PLK.tool ./PLK.tool ---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop.       macOS High Sierra bypass Firmware and MBR checks in post#13.
      BaseSystem_PLK.tool_ElCap.zip
      BaseSystem_PLK.tool_Sierra.zip
      BaseSystem_PLK.tool_Mojave.zip (need to run in Mojave to avoid dependency errors)
      BaseSystem_PLK.tool_Catalina.zip
×