3,845 posts in this topic
This topic is now closed to further replies.
Recently Browsing 0 members
No registered users viewing this page.
*Update bios/uefi to F7+*
1- Go to M.I.T./Advanced Frequency Settings tab
Extreme Memory Profile (X.M.P.) - Profile 1
2- Go to BIOS tab
CSM Support - Disabled
3- Go to Peripherals/Thunderbolt(TM) Configuration tab
Security Level - No Security
Thunderbolt USB Support - Enabled
GPIO3 Force Pwr - Enabled
4- Go to Chipset tab
Internal Graphics - Enable
*Use this folder with FULL DSDT PATCHED
*Use this folder with FULL DSDT PATCHED
---Extract one Full dump for DSDT edits, post files---
GIGABYTE Z390 DESIGNARE
Intel Core i9-9900K
CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
MSI RX Vega 64 AIR Boost 8G OC
Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular
TP-Link Archer T9E
Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
-FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---
-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
Thanks to KGP for SSDT Thunderbolt
Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
We're all here to have fun and learn from each other!
How to create a macOS Installer which doesn't need bootloader kext injection (FakeSMC in pre-linked kernel), bypass High Sierra firmware and MBR checkBy fusion71au
This is a brief guide on how to create a vanilla El Capitan (also same process for Sierra) OS X Installer USB with an updated prelinked kernel containing FakeSMC.
It is tailored for those users who want to understand the “nuts and bolts” of how to create an installer and also to help brush up on their terminal skills (rather than have one made for them with the numerous automated “tools” available or even Apple’s createinstallmedia) :
Specifically, it is also a “Proof of Concept” which shows that installation is possible without even having to rely on boot loader kext injection.
Existing Yosemite installation (or Mavericks - see post#4 for steps 7,8) “Install OS X El Capitan.app" downloaded to the Applications folder Pacifist FakeSMC.kext - Slice or Kozlek branch Bootloader - Clover or Chameleon 8GB or larger USB drive (16GB recommended), formatted HFS+ (MBR or GUID) named “Installer”
1. Boot into Yosemite with the kext-dev-mode=1 boot flag
2. Open OS X terminal and type the following lines, followed by <Enter> after each line.
The image restore and file copying may take a while to complete, and at the end of the process, the Installer volume is renamed to “OS X Base System"....
sudo -s hdiutil attach /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/SharedSupport/InstallESD.dmg asr restore -source /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg -target /Volumes/Installer -erase -format HFS+ -noprompt -noverify rm /Volumes/OS\ X\ Base\ System/System/Installation/Packages cp -av /Volumes/OS\ X\ Install\ ESD/Packages /Volumes/OS\ X\ Base\ System/System/Installation cp -av /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg /Volumes/OS\ X\ Install\ ESD/BaseSystem.chunklist /Volumes/OS\ X\ Base\ System diskutil unmount /Volumes/OS\ X\ Install\ ESD exit 3. Right click on the “OS X Base System” Volume and click “Get Info”
4. Click on the lock icon and untick “Ignore ownership on this volume”
5. Extract/Copy the El Capitan Kernels folder into /System/Library/ of the USB with Pacifist. NB It is found in the "Essentials.pkg" in /System/Installation/Packages
6. Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel —> OG.prelinkedkernel
7. Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of the installer USB using Finder.
8. Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel…..
sudo -s chmod -R 755 /Volumes/OS\ X\ Base\ System/Library/Extensions chown -R 0:0 /Volumes/OS\ X\ Base\ System/Library/Extensions touch /Volumes/OS\ X\ Base\ System/System/Library/Extensions kextcache -u /Volumes/OS\ X\ Base\ System exit Any errors should be noted but the output below is normal e.g.
9. Install your Bootloader targeting the OS X Base System volume
10. Boot your system with the USB without injected kexts into the OS X Installer GUI....
The original prelinked kernel in a fresh install of El Capitan will also lack FakeSMC ie it will only be linked to Apple signed kexts. In order to boot into El Capitan the first time around without boot loader kext injection, the PLK needs to be rebuilt for the El Capitan volume like we did for the installer:
1. Boot into Yosemite with the kext-dev-mode=1 boot flag
2. Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel for the El Capitan volume —> OG.prelinkedkernel
3. Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of El Capitan using Finder
4. Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel. In this example, the El Capitan volume is named "El_Capitan" - change if you have named it something else...
sudo -s chmod -R 755 /Volumes/El_Capitan/Library/Extensions chown -R 0:0 /Volumes/El_Capitan/Library/Extensions touch /Volumes/El_Capitan/System/Library/Extensions kextcache -u /Volumes/El_Capitan exit 5. Install your Bootloader targeting the El Capitan volume. This step is only necessary if you are installing El Capitan on a new drive without existing boot loader (not required if installing on a disk with existing boot loader beside Yosemite).
6. Reboot your system without injected kexts into El Capitan!
The All-In-One Guide to Vanilla OS X for beginners
Updates for Sierra and High Sierra Custom Prelinkedkernel Generator Tool I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan. Instructions: 1. Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder. 2. Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled. 3. Copy BaseSystem.dmg to ~/Downloads/BaseSystem 4. Open terminal and run the following commands... cd ~/Downloads/BaseSystem chmod +x PLK.tool ./PLK.tool ---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop. macOS High Sierra bypass Firmware and MBR checks in post#13.
BaseSystem_PLK.tool_Mojave.zip (need to run in Mojave to avoid dependency errors)
Clover r5051 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
1. Download and unzip "EFI_Clover_r5051 for VMware.zip". Mount Clover-v2.5k-5051-X64.iso by double clicking on it.
2. Mount your VM's EFI System Partition eg in terminal
sudo diskutil mount disk0s1 3. Copy EFI folder from step 1 into the EFI partition
4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
I successfully installed macOS 10.11.6 and Windows 7 Pro SP1 in UEFI mode on the laptop.
I know, there are detailed guides here and on osxlatitude.com but I was not agree with them and carefully check and test every step to tune my Mac.
Intel® Core� i5-3320M CPU @ 2.60GHz, speedstep works with Clover default settings
Chipset Intel 7 series, no patches needed
Video: IntelHD4000 or NVS5200M switchable in BIOS, work in both cases
LAN; Intel 82579LM, works with IntelMausiEthernet.kext v2.2.1
Audio: IDT 92HD93BXX, works with VoodooHDA 2.9.0.
SDHC reader O2Micro; works with native AppleSDHC.kext with Clover Arbitrary properties.
USB3.0 works natively if not disabled in DSDT
PS2 keyboard and touchpad works with VoodooPS2.
WiFi: Dell Intel WiFi was replaced by Dell DW1520, Broadcom BCM943224HMS. DeviceID=4353
LCD Screen 1366x768
BIOS A12. Initially was A02. Then I flashed A23 and found it is quite bad. The screen is full of artefacts. Flash A12 and all is OK. Not tested other versions.
For some reason BIOS can switched from Intel to Nvidia by itself so I have to do my solution working independent on this state.
It is not working OOB although it has DeviceID known to Apple. The reason is WhiteList in the driver.
I set MacModel as MacBookPro10,1 while the WiFi will work on MacBookAir. I make a patch in Clover.
As well a patch for channels.
I deleted a kext Brcm4331 because it has the same DeviceID. Let kext Brcm4360 to work alone.
In Bios we can set Optimus = Enable/Disable
If Enable then we have two videocards Intel first and Nvidia second. In this case additional SSDT-3.aml will switch off Nvidia.
If Disable then we have only Nvidia card. It will work if Board-ID taken from iMac13,2.
But here there is contradiction with WiFi with required Board-ID from MacBookAir.
So I take MacModel as MacBookPro10,1 which is most close by CPU IvyBridge.
Set BoardID like iMac13,2 to make Nvidia working.
Patch BoardID in Brcm4360 to make WiFi working.
Now I have
and SSDT-3.aml in ACPI\patched folder. This SSDT will switch off Nvidia if Intel card ON.
For Intel graphics there is a patch against 8 apples at start.
This Nvidia 5200 is Fermi and works in ElCapitan.
No special kexts.
The brightness controlled by keys F1,F2 and slider in Control Panel in both case Intel or Nvidia. Details here #72
DSDT and SSDT
This is very long story and finally I have working sleep in both cases Intel or Nvidia.
I use my HWSensors3 with FakeSMC 3.5.2.
I got monitoring:
GPU main frequency
GPU shader frequency
Battery state % full, time to charged or time to empty.
Battery voltage dinamically.
Battery amperage dynamically. I can see it changes on heavy games.
I like VoodooHDA and have no problems with it.
The sound is clear, loud, and switchable between internal speaker and headphone.
Mic is working.
Just tested with BTFirmwareUpdate.kext and it works in 10.11.6. I not needed it so switched off by wireless switch at right side.
For 10.13.6 there is other kext BRCMInjector.
Keyboard, Touchpad and Touchstick
I made my fork of the VoodooPS2 driver, take here sources and release version
My config, ACPI files and kexts are in attachment.
Better DSDT in the post #6.
Sleep working even when AC inserted.
Now I have HighSierra and this is my EFI folder. Note, HighSierra is possible only with Intel graphics (Optimus is enabled in BIOS)
Welcome to discussion!
First beta... macOS Catalina 10.15 beta (19A471t) Release Notes!!!
macOSDeveloperBetaAccessUtility.dmg.zip (thanks to gengik84)
Clover r4945 (thanks to Cyberdevs)
Lilu_plugins (thanks to gengik84)
Port Limit Patch (thanks to daliansky)
older non metal nVidia and Intel cards (thanks to fusion71au)
MBR installation on macOS Catalina (thanks to crazybirdy) - workaround!!!
Mac Downloader (thanks to ricoc90)
Stuck boot in Beta 5 (thanks to MaLd0n)