Jump to content
fantomas

[pre-release] macOS High Sierra

3,845 posts in this topic

Recommended Posts

Is there a clear way to bypass the OSInstall.mpkg error yet? Both my machines stop at this error when booting from USB. Booting from .app is fine. Clover 4084, apfs.efi in driversuefi, bios version and date updated, createinstallmedia usb creation.

 

Sent from my SM-G930F using Tapatalk

Share this post


Link to post
Share on other sites
Advertisement

Got this error

87c060f552c18ec515e57a4213f60ef0.jpg

 

Sent from my HTC One M9 using Tapatalk

IMHO Make sure the destination hard disk is OK. you might have damaged HDD

Is there a clear way to bypass the OSInstall.mpkg error yet? Both my machines stop at this error when booting from USB. Booting from .app is fine. Clover 4084, apfs.efi in driversuefi, bios version and date updated, createinstallmedia usb creation.

 

Sent from my SM-G930F using Tapatalk

Hi Savage,

see this:

http://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/?p=2441157

 

I've beed using this method and it works overtime without any errors. I even installed macOS High Sierra on USB disks several times just to make sure.

Share this post


Link to post
Share on other sites

IMHO Make sure the destination hard disk is OK. you might have damaged HDD

I'm very sure it's not damaged, I'm not sure if the driver for sata is ok because if I make usb and select disk utility stay with loading disks a veeery looong time.

Share this post


Link to post
Share on other sites

Had anyone else experienced the bug that, when your computer goes into video sleep, after it wakes up, the mouse is no longer visible?  I am having multiple problems with sleep.  Lid sleep doesn't work.  Selecting sleep from the Apple menu does work but, after waking up, there is no video.  I thought I'd try the old-school sleep trick and that's when I found out that you lose your cursor after waking from video sleep.  DP2 can't come fast enough for me.

Share this post


Link to post
Share on other sites

Had anyone else experienced the bug that, when your computer goes into video sleep, after it wakes up, the mouse is no longer visible? I am having multiple problems with sleep. Lid sleep doesn't work. Selecting sleep from the Apple menu does work but, after waking up, there is no video. I thought I'd try the old-school sleep trick and that's when I found out that you lose your cursor after waking from video sleep. DP2 can't come fast enough for me.

I have a similar issue like you.

One of my issues is battery indication on statusbar.

 

I checked battery indication in setting. But after reboot, battery indication is disappered

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

Is there a clear way to bypass the OSInstall.mpkg error yet? Both my machines stop at this error when booting from USB. Booting from .app is fine. Clover 4084, apfs.efi in driversuefi, bios version and date updated, createinstallmedia usb creation.

 

Sent from my SM-G930F using Tapatalk

I've installed High Sierra from within Sierra, with Clover 4061 with an unchanged config, Here you can see what i did.

Share this post


Link to post
Share on other sites

What make me confuse is, RevoBoot did some commits & managed to boot 10.13  without mentioning "FirmwareFeatures(Mask)" nor APFS at all.. Is Enoch did the same things?

Not sure, but I would think, that RevoBoot already provided the information, so didn't need to change that (see https://github.com/Piker-Alpha/RevoBoot/blob/clang/i386/libsaio/smbios/getters.h#L348)

Share this post


Link to post
Share on other sites

For all those, who suffers from "Failed PCIe Configuration" Error on BCM94352 (in High Sierra it ends with kernel panic), a part from Clover-config with patches. 3 Patches per kext.

Thank you.

I wonder did you get handoff-hotspot in 10.13?

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

I wonder did you get handoff-hotspot in 10.13?

 

I have something wrong with BTFirmwareUploader.kext. All Bluetooth kexts are loaded, but still no bluetooth hardware.

Share this post


Link to post
Share on other sites

I have something wrong with BTFirmwareUploader.kext. All Bluetooth kexts are loaded, but still no bluetooth hardware.

Yes. BTFU is gone in 10.13. I reported this issue to him. His eapdfix too.

 

Before fix BTFU, try rehabman's bluetooth driver.

Now i got BT, but hotspot-handoff are not working.

 

I checked patch. Still same like 10.12

 

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

@sherlocks,

where is AirPortBrcmNIC located, I only have AirPortBrcmNIC-MFG in S/L/E

 

I have the kernel panic as said by Neo.aka.Darkman above, 

so how do I use his plist.

 

Is that the complete patch or we se this in addition to your earlier patch described in post 297 in here.

Please advise.

Share this post


Link to post
Share on other sites

@sherlocks,

where is AirPortBrcmNIC located, I only have AirPortBrcmNIC-MFG in S/L/E

 

I have the kernel panic as said by Neo.aka.Darkman above, 

so how do I use his plist.

 

Is that the complete patch or we se this in addition to your earlier patch described in post 297 in here.

Please advise.

 

My patch is an addition to existing patches. So you copy these 6 patches into your Clover-config to other Wi-Fi patches.

Share this post


Link to post
Share on other sites

IntelGraphicsFixup.kext with support of Kaby Lake Graphics. 

 

  • Fixes PAVP freezes on Intel Azul (HD4400, HD4600), Skylake Graphics (HD530) and Kaby Lake Graphics (HD630)
  • Fixes boot logo on all known Intel Graphics starting with HD4000
  • Fixes display initialization issues for Skylake an Kaby Lake

Will be in trunk later. Author is on vacation :)

attachicon.gifIntelGraphicsFixup.kext.zip

 

In macOS High Sierra 10.13 use bootarg -igfxbeta. 

In macOS Sierra 10.12.5 build 16F2073 works without bootarg

 

Notice:

macOS Sierra 10.12.5 build 16F2073 already have NATIVE Kaby Lake support

 

 

Where can I get a copy of 10.12.5 build 16F2073

Share this post


Link to post
Share on other sites

My patch is an addition to existing patches. So you copy these 6 patches into your Clover-config to other Wi-Fi patches.

just to be sure your patches plus  those for 10.12 or your patch plus the newer patches for high Sierra.

Share this post


Link to post
Share on other sites

just to be sure your patches plus  those for 10.12 or your patch plus the newer patches for high Sierra.

old patches for sierra are no longer useful in high sierra. There are now 2 new kexts for BCM94352. You need all High Sierra patches + my patches.

Share this post


Link to post
Share on other sites

old patches for sierra are no longer useful in high sierra. There are now 2 new kexts for BCM94352. You need all High Sierra patches + my patches.

which would you suggest there are a couple suggested like so!!!!

 

 

BCM94352-Airport-Extreme, credit Sherlocks based on skvo original.  by sherlocks

 

com.apple.driver.AirPort.BrcmNIC

6B100000750D

6B1000009090

 

com.apple.driver.AirPort.BrcmNIC-MFG

6B100000750D

6B1000009090

 

 

 

BCM94352-fvco, credit Sherlocks based on the-darkvoid original

 

com.apple.driver.AirPort.BrcmNIC

81F952AA000074BF

81F952AA00006690

 

com.apple.driver.AirPort.BrcmNIC-MFG

81FF52AA000074C4

81FF52AA00006690

 

 

 

*********************************************************

 ***********************************************************

New patch for Wifi bcm4352 id 0x43b1 -> id to be use in DSDT 0x43a0.

 

id 43a0 move from AirPortBrcm4360  to AirPortBrcmNIC

 

fcvo patch replace 81f952aa 000074bf with 81f952aa 0000ebbf

pci patch replace 4139c544 8b75d075 with 4139c5e9 92000000

 

by Fred

 

*********************************************

 

what should one opt.

also I have the AirPortBrcmNIC-MFG.kext ,which is the second, theres nothing in ionetworkingfamily.kext.

Share this post


Link to post
Share on other sites

Ich currently don't have the RX 480 in my system so I am depending on the iGPU (HD 4600). But OS X doesn't even recognizes it.

Does someone of you also have that problem?

Share this post


Link to post
Share on other sites

Had anyone else experienced the activation Trim Enabler ensures that the system opens much less quickly after the Boot process ?

On both APFS and HFS+

Share this post


Link to post
Share on other sites

Had anyone else experienced the activation Trim Enabler ensures that the system opens much less quickly after the Boot process ?

On both APFS and HFS+

 

For me it was the opposite.  Once I enabled Trim, everything started working better.  But I did not use the Clover patch to enable Trim.  I used the Terminal command.

I have a similar issue like you.

One of my issues is battery indication on statusbar.

 

I checked battery indication in setting. But after reboot, battery indication is disappered

 

나의 LG-F800S 의 Tapatalk에서 보냄

 

I used a DSDT patch created by RehabMan for use with ACPIBatteryManager.kext.  Once I got that kext to load properly via kext injection, my battery showed up in the menubar consistently.  Before that, I had the same problem as you.  I would check the box to have the battery show in the menubar and it would uncheck right after I checked it.

Share this post


Link to post
Share on other sites

For me it was the opposite.  Once I enabled Trim, everything started working better.  But I did not use the Clover patch to enable Trim.  I used the Terminal command.

 

maybe because I have 3 OS X system with different SSD ?

My boot Clover ESP is on Sierra 10.12 and I boot to the 10.13 

I try the Clover Trim and terminal , the result is the same

Need more test  :)

Share this post


Link to post
Share on other sites

I'm very sure it's not damaged, I'm not sure if the driver for sata is ok because if I make usb and select disk utility stay with loading disks a veeery looong time.

Same here. It took so long that I did not want to wait any more...

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Ethan Jarvis
      Hello,
       
      Here I am looking for the answer of new Mac OS Catalina features and what type of Mac will support this new Os??
    • By Arman Hossain
      HI 
      I want install High Sierra  on my pc . my CPU is : AMD Ryzen 3 2200g and my MotherBoard is : ASUS EX A320m. and 8gb ram DDR4 ram . i dont have any external gripch card. i have seen some video on youtube how to install High Sierra but they use extranal gripch card to make it good  but i don't have any extranal gripch card . on my windows sysem the shared gpu is 2GB which is using my ram to crate the vega gripch  . i want know is it possible to install High Sierra on my pc with out any extarnal gripsh card  ?


    • By kushwavez
      Acer Aspire V15 V5-591G - Catalina 10.15
      Original link:
      https://osxlatitude.com/forums/topic/11355-acer-aspire-v-15-v5-591g-catalina-windows-10/
      (Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)
      Specifications:
      - Motherboard: USOPP_SLS (Skylake-H PCH)
      - BIOS: Insyde Corp. v 1.15
      - CPU: Intel Core i5-6300HQ 2.3 GHz (Skylake)
      - GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530
      - RAM: SK hynix 4 GB DDR4 (Later I bought + KINGSTON 4 GB) 2133 MHz
      - WiFi + Bluetooth: Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth)
      - Audio: Realtek HD Audio: ALC 255 
      - Ethernet: Realtek RTL8168/8111
      - Card Reader: Realtek USB 2.0 Card Reader (USB2.0-CRW)
      - Webcam: HD Webcam
      - HDD: TOSHIBA MQ01ACF032 320 GB HDD
      - SSD: SPCC M.2 230 GB SSD
      - Display: 1366x768 (15.6", Matte)
      - Battery: 6 cell 56Wh / 5040mAh
      - Connectors: 
      1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) - Keyboard & Touchpad: Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard.
      Working:  
      - Wi-Fi (with BCM94352Z)
      - Bluetooth hand-off (With BCM94352Z)
      - Full Graphics enabled on HD 530: ig-platform-id: 0x191b0000 (HD 530 Mobile)
      - Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use "Rec. ITU-R BT. 709-5" Color Profile (System Pref. -> Displays -> Color)
      - HDMI & VGA Outputs: AppleGraphicsDevicePolicy.kext Clover patch
      - Audio (ALC 255): (Internal Speakers, Internal Microphone, Headphone jack with AppleALC, ALCPlugFix -> layout-id=17)
      - Ethernet Realtek 8168/8111: RealtekRTL8111.kext
      - App Store, Messages, FaceTime, Siri, iCloud (native)
      - Integrated webcam (native)
      - 3.0 USB (native)
      - Touchpad and Keyboard (ELAN501): Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn-> To fix this try Karabiner (VoodoPS2Controller.kext), - for gestures try SmartTouchpad drivers
      - Battery info: Install ACPIBatteryManager.kext with Kext Utility or other installer.
      - Sleep Mode
      - SSD with TRIM enabled (to enable trim, open Terminal and write "sudo trimforce enable")
      Not working:
      - Original Wi-Fi (Qualcomm Atheros QCNFA344A):  unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle.
      - NVIDIA GeForce GTX 950M: Optimus not supported.
      - Card Reader: Unsupported -> Can't really fix because I don't have any SD Card at the moment, maybe can be fixed by adding Prod & Ven IDs to AppleStorageDevices.kext, I never used it anyway. name: "USB2.0-CRW" Prod ID: "0x0129" Ven ID: "0x0bda  (Realtek Semiconductor Corp.)"
      For Wi-Fi:
      - 1st method: You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it
      - 2nd and I think the best method: Replace your M.2 Qualcomm Card with a compatible BCM94352Z card (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, they're all in my attached zip). You could buy this card from ebay, aliexpress, or amazon
       
      Issues:
      - None
      BIOS Settings:
      - BIOS version 1.15 (irrelevant)
      - Secure Boot: Disabled
      - Touchpad: Advanced
      - Boot mode: UEFI
      Getting ready for Installation:
      - Download the Catalina install zip (bootpack & postinstall): acer_aspire_V591G-55TU_cata.zip
      Installation:
      - Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager)
      - Copy my Clover folder to the USB's EFI folder
      - Boot with the Installer USB
      - If you stuck in boot, reboot and in the Clover bootloader select "config_debug.cfg" -> you'll have more informations about the freeze
       
      Please open the README.rtf in my install zip for more informations about the USB Installer & Post installation!
      For any system kext installation\modification you need to boot with config_debug.plist (or disable SIP manually)
      Also on Catalina the System folder is read-only, so you need to remount in rw. 
      If you have a single RAM and getting panic at boot, then you need to edit the "config.plist" with these (SMBIOS->after "Version 1.0"):
      ->Edit "Frequency" and "Size" to match your RAM values
      <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict>  
      PowerManagement  fix:
      Set HWPEnable=YES in Clover (already set), CPUFloor to "700", Frequency to "2300" and "3200"(Normal and Turbo, if you have i7-6700HQ version then it should be "2600", "3500") and "FrequencyVectors" from "0x0d000000" to "0x07000000" in "S/L/E/IOPlatformPluginFamily.kext/Contents/PlugIns/X86PlatformPlugin.kext/Contents/Resources/Mac-A5C67F76ED83108C.plist", MSR _xcpm_idle Patch to KernelToPatch in Clover (If you have High Sierra, change "MatchOS" to 10.13):

      <key>KernelToPatch</key> <array> <dict> <key>Comment</key> <string>MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> ILniAAAADzA= </data> <key>MatchOS</key> <string>10.14</string> <key>Replace</key> <data> ILniAAAAkJA= </data> </dict> </array> Reboot, and it's 800MHz in idle state, same on Windows.
       

      Elan SmartTouchpad
      I only use scrolling, one-, double- & tripletap
      If you want to try other gestures go to this link for more informations, options (v4.6.5) ->  DETAILS ABOUT THE SMART TOUCHPAD DRIVER FEATURES
      Fn Brightness keys not working with this, tried several things without success. With VoodoPS2Controller it's working, but you'll have no gestures (neither scrolling).
       
       
      Before updating to a new version of Catalina please update kexts (and clover if necessary) to newer versions to avoid kernel panics.
      Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New)
       
      Catalina & Windows 10 Dual-Boot:
      Dual-boot clean install (on one drive), UEFI Only:
       
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac),   Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart,  Boot into your Win installer, Format the partition you created for Win, install.   Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       5.  You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      Dual-boot with Windows installed first (on one drive), UEFI Only:
      If you already have Windows and you don't want to lose all your data there is a hope:
      I created a video from this restore method: [Hackintosh] Dual-Boot High Sierra & Windows - when Windows already installed - no data waste - UEFI
      You need bootable Mac Installer and a full system restore image (link is in my video's description).
      (You may see errors if your EFI partition is not 200 MB)
       Boot into your Windows, resize your partition or create one for Mac.  Boot into your Mac installer and in Disk Utility format the partition you created.  Restore from image: select your full system restore image.  When it's finished restoring you just need to restart, then boot to the system with your usb.  When you successfully booted to Mac desktop, mount your EFI partition (use terminal or an EFI mounter app), open EFI, you will see there is a Microsoft folder already (don't touch that!). Copy my CLOVER folder to the EFI folder then Restart.  Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       7.  You're done! You can select your old Windows and your new macOS!
      (Only tried with Windows 8/8.1/10. I don't know Windows 7,etc.)
       
      IF YOU GETTING ERRORS DURING MAC RESTORE:
      - Make sure you have partitions in GPT
      - Windows using 100 MB EFI and will annoy the Mac restore. Don't worry, just ignore the errors.
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      - Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)
       
      IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found):
      - It's because your EFI is not 200 MB or not an "Apple" original EFI,  but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem)
      - You also could "mount" the EFI from Windows:
      1st method: open cmd in administrator mode and type:
      diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part (Select System type partition, for example 2) sel part 2 assign letter=b (This will "mount" your EFI partition) Open Explorer++ or TotalCommander in administrator mode to manage EFI remove letter=b (This will "unmount" your EFI) 2nd method: open cmd in administrator mode and type:
      mountvol b: /s (This will mount your EFI) Open Explorer++ or TotalCommander in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI) Thanks to all OSXLatitude members for helping me out! (Jake Lo, Hervé, Bronxteck, black.dragon74)!
      Notes:
      2019.10.09: Installed macOS Catalina 10.15 -> Updated Clover, kexts & config.plist -> no problem so far
      2019.08.18: Updated to 10.14.6 -> no problem when/after installing
      2019.06.01: Updated to 10.14.5 -> no problem when/after installing
      2019.04.25: Optimized touchpad scrolling -> updated install files
      2019.03.30: Fixed USB 3.0 ports, fixed Bluetooth crashes after sleep -> updated bootpack
      2019.03.28: Updated to 10.14.4. Unexpected crashes while updating to 10.14.4 -> fixed by updating Clover to the latest (v4910) version. Bluetooth crashes appeared -> fixed by downgraded Brcm*.kexts. Updated bootpack.
      2019.02.24: Bluetooth crashes after sleep -> fixed, updated bootpack. 
      2019.02.22: Updated to 10.14.3. Fixed HDMI Audio by installing "FakePCIID_Intel_HDMI_Audio.kext" -> fixed freezing during boot. Fixed brightness levels by installing "AppleBacklightFixup.kext". Also updated bootpack & postinstall zip down in attachments.
      2019.01.21: Removed FakeSMC.kext, SMCHelper-64.efi, replaced by VirtualSMC.kext, VirtualSMC.efi because I got random freezes when booting system (kextd stall[0], (120s): 'AppleACPICPU' -> CPU is at 100%, fans are spinning fast), also updated bootpack in the attachments "acer_aspire_v591g-55tu_clover.zip" -> Freeze continued, brought back FakeSMC, deleted VirtualSMC (caused BT crashes).
      2019.01.18: HDMI Audio is fixed, I didn't do anything HDMI Audio is not fixed, sometimes it worked but most likely not. (no idea why)
      2018.12.09: Updated to 10.14.2 -> did without any complication
      2018.11.28: Fixed combo-jack garbage sound output by installing ALCPlugFix and CodecCommander.kext
      2018.11.01: Updated to 10.14.1 -> HDMI & VGA ports are gone again. -> Fixed by "AppleIntelSKLGraphicsFramebuffer.kext" rollback from 10.14.
      2018.09.28: Updated to Mojave 10.14 -> Fixed HDMI & VGA Outputs by adding "AppleGraphicsDevicePolicy.kext" patches to config.plist, HDMI audio not working
    • By fantomas
      macOS Catalina 10.15.1 beta (19B68f)
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/download/file.php?id=24376
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
×