Jump to content
About Just Joined group Read more... ×
fantomas

[pre-release] macOS High Sierra

3,823 posts in this topic

Recommended Posts

My High Sierra GM boot slower compared to Sierra. It stop at this verbose boot screen for about 15s. Will erase this disk make it go faster through this line? Any solution? Thanks

 

post-1767774-0-66818400-1506175280_thumb.png

 

After 15s

post-1767774-0-89845400-1506175333_thumb.jpg

 

And then 

post-1767774-0-47795600-1506175378_thumb.png

Share this post


Link to post
Share on other sites
Advertisement

My High Sierra GM boot slower compared to Sierra. It stop at this verbose boot screen for about 15s. Will erase this disk make it go faster through this line? Any solution? Thanks

 

 

Disable TRIM. It doesn't work well on apfs formatted SSD's with SandForce controllers and maybe several other old controllers...

Share this post


Link to post
Share on other sites

I don't know if that's still applicable with GM release but High Sierra beta versions used to run terribly slow on a HDD with APFS partitions. This made APFS suitable only for SSD. If you have a mechanical drive, you should probably re-install on a legacy HFS+ partition.

 

If you have an SSD (as it would seem) and had to disable TRIM, you might as well revert to HFS+ format too, TRIM being highly desirable on an SSD... Personally, HiSie runs perfectly with APFS on 2 of my laptops with different SSDs and all have TRIM enabled.

Share this post


Link to post
Share on other sites

Crucial_CT275MX300SSD1 :

 

Capacité : 275,06 Go (275 064 201 216 octets)

Modèle : Crucial_CT275MX300SSD1                  

Révision : M0CR040

 

Works well here APFS and trim Activated

Boot  fast no probleme 

Share this post


Link to post
Share on other sites

 

Crucial_CT275MX300SSD1 :

 

Capacité : 275,06 Go (275 064 201 216 octets)

Modèle : Crucial_CT275MX300SSD1                  

Révision : M0CR040

 

Works well here APFS and trim Activated

Boot  fast no probleme 

 

 

 

Sure. Crucial MX300 uses modern Marvell 88SS1074 controller...

Share this post


Link to post
Share on other sites

Well, I'm on SSD, Disable TRIM works great, much faster.

 

 

Crucial_CT275MX300SSD1 :

 

Capacité : 275,06 Go (275 064 201 216 octets)

Modèle : Crucial_CT275MX300SSD1                  

Révision : M0CR040

 

Works well here APFS and trim Activated

Boot  fast no probleme 

 

 

 

Please verify the TRIM patch

post-1767774-0-43653300-1506178060_thumb.png

 

P/s: Is there a way to enable VGA output with Intel GFX HD4000? It will be great if that can be patch through Clover

 

Share this post


Link to post
Share on other sites

For those who are interested

I just bought a great little Graphics Card Saphire Radeon 5570
This card is native any version of OS X from 10.6 to 10.13 
Working only Inject ATI with Clover; thats it!  :thumbsup_anim:
 
 

post-951341-0-15751600-1506197838_thumb.jpg

post-951341-0-88447700-1506198067_thumb.png

Share this post


Link to post
Share on other sites

 

Crucial_CT275MX300SSD1 :

 

Capacité : 275,06 Go (275 064 201 216 octets)

Modèle : Crucial_CT275MX300SSD1                  

Révision : M0CR040

 

Works well here APFS and trim Activated

Boot  fast no probleme 

 

What do you consider as fast. Mine boots 10 secs from clover to login screen. Is this OK? My El Capitan takes only 6 secs.

Share this post


Link to post
Share on other sites

What do you consider as fast. Mine boots 10 secs from clover to login screen. Is this OK? My El Capitan takes only 6 secs.

 

same here 

this is very good for High Sierra, you will not find faster I think

Share this post


Link to post
Share on other sites

Well, I have just discovered a fun thing with FMM on HS.

When you lock your Hack through iCloud, when your hack received the lock command, It will do a abrupt and your hack with restart :D.

Because I'm using EmuVariableUEFI-64 so that when abruption occurs, it doesn't save the nvram content so nothing was locked.

Does this happen on other High Sierra MacBook?

Share this post


Link to post
Share on other sites

 

For those who are interested

I just bought a great little Graphics Card Saphire Radeon 5570
This card is native any version of OS X from 10.6 to 10.13 
Working only Inject ATI with Clover; thats it!  :thumbsup_anim:

 

great.

Share this post


Link to post
Share on other sites

Well, I have just discovered a fun thing with FMM on HS.

When you lock your Hack through iCloud, when your hack received the lock command, It will do a abrupt and your hack with restart :D.

Because I'm using EmuVariableUEFI-64 so that when abruption occurs, it doesn't save the nvram content so nothing was locked.

Does this happen on other High Sierra MacBook?

 

happens on my optiplex 790 too (imac12,2). Not only in HS, also in Sierra

Share this post


Link to post
Share on other sites

great.

I remove the 

<key>FBName</key>
<string>Cedar</string>
 

and now its show the exacte name   :thumbsup_anim:   :D

ATI Radeon HD 5570

 

EDIT***

 

but to have my two screens on my two GPU I have to add the FB
and sacrificing the name  :)

 

sans_100.png

Share this post


Link to post
Share on other sites

My hack show a dialog said: Your computer has detected a potential problem and want me to submit a report to Apple, should I submit it?

This is the zip of the report folder where the show report button took me to 

Link: http://ipfs.io/ipfs/QmU8GXZs6xoZpn4WzdM3arq7M2Y4goKa3Qo9PsUsKMUAAw

eficheck_none_7efe090da933637baaf0e2d9bf0c14e77665447472278812ae94833f13855e8c.zip

 

P/s: I found this https://pikeralpha.wordpress.com/2017/08/18/apple-to-cleanup-a-bios-region-of-your-ami-and-phoenix-bios/

Share this post


Link to post
Share on other sites

You can connect 2 monitors  on the 5570 - DVI and HDMI.

 

 

I remove the 

<key>FBName</key>
<string>Cedar</string>
 

and now its show the exacte name   :thumbsup_anim:   :D

ATI Radeon HD 5570

 

EDIT***

 

but to have my two screens on my two GPU I have to add the FB
and sacrificing the name  :)

 

sans_100.png

 

Share this post


Link to post
Share on other sites

You can connect 2 monitors  on the 5570 - DVI and HDMI.

one in the HDMI to the ATI HD 5570 and the other in my Display Port IGPU HD 3000

Dell Optiplex 790, both display works

post-951341-0-10091900-1506269685_thumb.png

post-951341-0-26346600-1506269695_thumb.png

post-951341-0-81451000-1506269811_thumb.png

Share this post


Link to post
Share on other sites

hello all, the uprade from appstore went fine so far.

but sleep wont work as before with 10.12.6.

 

machine went fine into sleep

i changed nothing but my GB Z77 D3SH board  reboots after wake from sleep.

 

i´ve got hibernatemode 0 and standby 1 and no display apps like Display Menu.

 

is there a Clover ACPI patch for this available ?

 

thx for help in advance !

Share this post


Link to post
Share on other sites

Where ist the Final Release on 10.13 ???

Today App Store Release 10.13 Official  :)

At this time 12H31 Pm Canada time 

 

not release yet

Share this post


Link to post
Share on other sites

When looking at the time of the DP seeds and iOS 11 release, I expect the final to be released within the next hour

Edit:

The final is there. Build 17A365.

Share this post


Link to post
Share on other sites

When looking at the time of the DP seeds and iOS 11 release, I expect the final to be released within the next hour

Edit:

 

The final is there. Build 17A365.

 

Confirmed!!!  :thumbsup_anim:  Downloading - 14 mins

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By MaLd0n
      -OpenCore Vanilla TUTORIAL-
       
       
      -USB Port Mapping TUTORIAL-
       
        1 -Create a USB bootable
       
      Create your usb installer, use this tool and download Catalina or Big Sur from Apple servers
       
      Catalina
      installScript_allfullapp.zip
       
      Big Sur
      installScript_1016fullapp.zip
       
      Credits: crazybirdy
       
      Copy Catalina / Big Sur installer to Applications folder, open terminal and run
       
      Catalina
       
       
      Big Sur
       
       
      If you want check one step by step, check here
       
      -Opencore Vanilla Tutorial
      https://tinyurl.com/ycvcnp8h
       
      2- EFI folder USB installation
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/ybwr9kq3
       
      -EFI Clover Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/yxsw7d3t
       
      3- EFI folder SSD
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition SSD 
      https://tinyurl.com/ybwr9kq3
       
      -EFI Clover Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition SSD
      https://tinyurl.com/yxsw7d3t
       
      4- Start Fine Tune
       
      Run this app and post full dump here for full ACPI solution
       
      RunMe.app
      https://tinyurl.com/y9562hz7
       
       
      If you like a SSDT way, here we go
      SSDT-OLARILA.aml.zip
       
      5- USB Solution
      USB INTEL SERIE 400.zip
       
      Use these kexts, enable XHCI port limit patch and follow this tutorial for remap USB ports
       
       
       
      --DSDT PATCHES--
       
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS -XHCI -PLUGIN TYPE -HDEF -ARTC -IPIC -TIMR -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -kUSBCompanionIndex -io-device-location -IMEI -EC -PNLF -ARPT -GFX0 -NVME -ACPI-WAKE-GPE -DTGP -HDMI / HDAU  
      --SCREENSHOTS--































      -If you want to buy me a beer - Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      Big Thanks to XLR and your Badass Motherboard, Ultrafast CPU, Coolest Heatsink, Huge Graphics Card, Tonnes of RAM,
      Gigantic Hard Drive, Lightspeed Disk Burner, Professional Sound Card, Massive LCD Display.
       
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!

      We're all here to have fun and learn from each other!
    • By gengik84
      First beta... build 20A4299v 
       
      Useful information:
      macOSDeveloperBetaAccessUtility.dmg.zip OpenCore is now able to boot the installer and pre-existing installed macOS 11 Big Sur macOS Big Sur beta 8 build (20A5374i)  New! VMware alternative topic installScript_1016fullapp
    • By chris1111
      Here my theme of OC 

      How to create are own Theme with Icnspack-Builder
       

       
      You can Download the themes with ➤ Themes Downloader
      You can also have the themes on ➤ Github
      You can also have the themes on ➤ HTML Page
       
    • By fantomas
      macOS Catalina 10.15.7 introduces local news in your Today feed in Apple News and improves the security and reliability of your Mac.
       
      Apple News
       
       Resolves an issue where macOS would not automatically connect to Wi-Fi networks Fixes an issue that could prevent files syncing through iCloud Drive Addresses a graphic issue that may occur on iMac (Retina 5K, 27-inch, 2020) with Radeon Pro 5700 XT  
      Update
      Combo

      View full article
×