Jump to content
fantomas

[pre-release] macOS High Sierra

3,845 posts in this topic

Recommended Posts

Yes, I tried it out but couldn't get web drivers to work as it seems to be with all Pascal cards at the moment. It works great in Sierra and is a fine card in general, in my opinion the best budget card Nvidia has ever made. And I hope so much (literally praying!) that Apple won't force me to buy some of those heavily overpriced AMD cards to get graphics acceleration in High Sierra :)

Overpriced AMD cards, on average a AMD card at equal performance is almost 40% less cost.

Share this post


Link to post
Share on other sites
Advertisement

Overpriced AMD cards, on average a AMD card at equal performance is almost 40% less cost.

:) I knew it wouldn't take long... This is totally off topic but... For example: RX550 and GT 1030 perform equally (the 1030 is a bit faster...), but the RX550 costs around 20 Euros more (80 vs 60 Euros), over 30 percent difference! If you add electricity costs it gets it even worse. And you could do that for mid and high range cards as well.   

Share this post


Link to post
Share on other sites

Yes, I tried it out but couldn't get web drivers to work as it seems to be with all Pascal cards at the moment. It works great in Sierra and is a fine card in general, in my opinion the best budget card Nvidia has ever made. And I hope so much (literally praying!) that Apple won't force me to buy some of those heavily overpriced AMD cards to get graphics acceleration in High Sierra :)

Thank you for the infos

Very good to know  B)

Share this post


Link to post
Share on other sites

hi,can someone help me?usb installer high Sierra beta -createinstallmedia -I have this error.

my efi folder  boot ok with high Sierra dp4 (core install hfs).

yet piker alpha script , how update dp4 to dp5. I have error (no install) 

regards

post-551987-0-43262400-1502443465_thumb.jpg

Share this post


Link to post
Share on other sites

hi,can someone help me?usb installer high Sierra beta -createinstallmedia -I have this error.

my efi folder  boot ok with high Sierra dp4 (core install hfs).

yet piker alpha script , how update dp4 to dp5. I have error (no install) 

regards

 

I haven't been able to install DP5 either.  It may be that we both have HP laptops.  It may be something else.  But lots of people have had problems with DP5 that they did not have with previous versions of High Sierra.  BTW, when I try to boot the DP5 installer, I get just past where your system hangs.  Mine doesn't hang, it loops the same error over and over.  I won't worry about this unless I have the same problem with the next DP as well.

Share this post


Link to post
Share on other sites

I haven't been able to install DP5 either.  It may be that we both have HP laptops.  It may be something else.  But lots of people have had problems with DP5 that they did not have with previous versions of High Sierra.  BTW, when I try to boot the DP5 installer, I get just past where your system hangs.  Mine doesn't hang, it loops the same error over and over.  I won't worry about this unless I have the same problem with the next DP as well.

@mnfesq  I have a HP Probook laptop and I used startosinstall

This is Apple's new way to deploy MacOS or Upgrade

I never have issue on that way in my Probook

 

Its the new tool inside the Install macOS High Sierra Beta.app

name is startosinstall

Your just need a Blank SSD formate in HFS+J (Mac OS Extended journaled / Guid table) before starting the tools

Make sure you have Install macOS High Sierra Beta.app in your Applications 

Working with BETA4, BETA 5, PBETA3, PBETA4

Working for Internal or External Drive

 

Command for APFS

"/Applications/Install macOS High Sierra Beta.app/Contents/Resources/startosinstall" --applicationpath "/Applications/Install macOS High Sierra Beta.app" --converttoapfs YES --volume /Volumes/USB --rebootdelay 30 --nointeraction

 

Command for HFS+J

"/Applications/Install macOS High Sierra Beta.app/Contents/Resources/startosinstall" --applicationpath "/Applications/Install macOS High Sierra Beta.app" --converttoapfs NO --volume /Volumes/USB --rebootdelay 30 --nointeraction

 

USB is the volumes, You can change he name of the volume

Usage: startosinstall

⬇︎

 

Usage: startosinstall --applicationpath <install macOS.app

path>

Arguments

--applicationpath, a path to copy of the OS installer

application to start

the install with.

--license, prints the user license agreement only.

--agreetolicense, agree to license the license you printed

with --license.

--rebootdelay, how long to delay the reboot at the end of

preparing. This

delay is in seconds and has a maximum of 300 (5 minutes).

--pidtosignal, Specify a PID to which to send SIGUSR1 upon

completion of the

prepare phase. To bypass "rebootdelay" send SIGUSR1 back

to startosinstall.

--converttoapfs, specify either YES or NO on if you wish

to convert to APFS.

If you do not specify this, the default is YES.--usage,

prints this message.

 

 

Its verry fast, when its finish you have to clic Terminate 

Reboot

⬇︎

 

page3i10.jpg

 

 

 

Alternate you can see my sig , My Hackintosh Stuff programme I made is MACOSXInstaller do the job verry good

Share this post


Link to post
Share on other sites

startosinstall is present from 10.11...  :P

it's really good

10.11.3

And working on 10.11.4  :lol:  :P

 

And really works good after correction by apple on 10.12 3  :wink_anim:

Share this post


Link to post
Share on other sites

@mnfesq  I have a HP Probook laptop and I used startosinstall

This is Apple's new way to deploy MacOS or Upgrade

I never have issue on that way in my Probook

 

Its the new tool inside the Install macOS High Sierra Beta.app

name is startosinstall

Your just need a Blank SSD formate in HFS+J (Mac OS Extended journaled / Guid table) before starting the tools

Make sure you have Install macOS High Sierra Beta.app in your Applications 

Working with BETA4, BETA 5, PBETA3, PBETA4

Working for Internal or External Drive

 

Command for APFS

"/Applications/Install macOS High Sierra Beta.app/Contents/Resources/startosinstall" --applicationpath "/Applications/Install macOS High Sierra Beta.app" --converttoapfs YES --volume /Volumes/USB --rebootdelay 30 --nointeraction

 

Command for HFS+J

"/Applications/Install macOS High Sierra Beta.app/Contents/Resources/startosinstall" --applicationpath "/Applications/Install macOS High Sierra Beta.app" --converttoapfs NO --volume /Volumes/USB --rebootdelay 30 --nointeraction

 

USB is the volumes, You can change he name of the volume

Usage: startosinstall

⬇︎

 

Usage: startosinstall --applicationpath <install macOS.app

path>

Arguments

--applicationpath, a path to copy of the OS installer

application to start

the install with.

--license, prints the user license agreement only.

--agreetolicense, agree to license the license you printed

with --license.

--rebootdelay, how long to delay the reboot at the end of

preparing. This

delay is in seconds and has a maximum of 300 (5 minutes).

--pidtosignal, Specify a PID to which to send SIGUSR1 upon

completion of the

prepare phase. To bypass "rebootdelay" send SIGUSR1 back

to startosinstall.

--converttoapfs, specify either YES or NO on if you wish

to convert to APFS.

If you do not specify this, the default is YES.--usage,

prints this message.

 

 

Its verry fast, when its finish you have to clic Terminate 

Reboot

⬇︎

 

page3i10.jpg

 

 

 

Alternate you can see my sig , My Hackintosh Stuff programme I made is MACOSXInstaller do the job verry good

hi Cris, i downloads Install macOS High Sierra Beta now but recive error on terminal if copy your command line on my USB

Share this post


Link to post
Share on other sites

hi Cris, i downloads Install macOS High Sierra Beta now but recive error on terminal if copy your command line on my USB

You have a wrong copy

chek the exact syntax

Maybe the name of volume not good?

Not for a usb key of 8 or 16 gig its for a Volumes (SSD OR HD ) Internal or External

See usage: startosinstall

Share this post


Link to post
Share on other sites

You have a wrong copy

chek the exact syntax

Maybe the name of volume not good?

Not for a usb key of 8 or 16 gig its for a Volumes (SSD OR HD ) Internal or External

See usage: startosinstall

I'm sorry but with terminal..........

i have this directory

 

r$ /Applications/Install\ macOS\ High\ Sierra\ Beta.app

 

 

 

the usb name is USB

the syntax is...........

Share this post


Link to post
Share on other sites

@mnfesq  I have a HP Probook laptop and I used startosinstall

This is Apple's new way to deploy MacOS or Upgrade

I never have issue on that way in my Probook

 

Its the new tool inside the Install macOS High Sierra Beta.app

name is startosinstall

Your just need a Blank SSD formate in HFS+J (Mac OS Extended journaled / Guid table) before starting the tools

Make sure you have Install macOS High Sierra Beta.app in your Applications 

Working with BETA4, BETA 5, PBETA3, PBETA4

Working for Internal or External Drive

 

Command for APFS

"/Applications/Install macOS High Sierra Beta.app/Contents/Resources/startosinstall" --applicationpath "/Applications/Install macOS High Sierra Beta.app" --converttoapfs YES --volume /Volumes/USB --rebootdelay 30 --nointeraction

 

Command for HFS+J

"/Applications/Install macOS High Sierra Beta.app/Contents/Resources/startosinstall" --applicationpath "/Applications/Install macOS High Sierra Beta.app" --converttoapfs NO --volume /Volumes/USB --rebootdelay 30 --nointeraction

 

USB is the volumes, You can change he name of the volume

Usage: startosinstall

⬇︎

 

Usage: startosinstall --applicationpath <install macOS.app

path>

Arguments

--applicationpath, a path to copy of the OS installer

application to start

the install with.

--license, prints the user license agreement only.

--agreetolicense, agree to license the license you printed

with --license.

--rebootdelay, how long to delay the reboot at the end of

preparing. This

delay is in seconds and has a maximum of 300 (5 minutes).

--pidtosignal, Specify a PID to which to send SIGUSR1 upon

completion of the

prepare phase. To bypass "rebootdelay" send SIGUSR1 back

to startosinstall.

--converttoapfs, specify either YES or NO on if you wish

to convert to APFS.

If you do not specify this, the default is YES.--usage,

prints this message.

 

 

Its verry fast, when its finish you have to clic Terminate 

Reboot

⬇︎

 

page3i10.jpg

 

 

 

Alternate you can see my sig , My Hackintosh Stuff programme I made is MACOSXInstaller do the job verry good

Is this to install or to make a installer USB? Seems to me its to install.

Share this post


Link to post
Share on other sites

Is this to install or to make a installer USB? Seems to me its to install.

Is for Install (Deploy)

I'm sorry but with terminal..........

i have this directory

 

r$ /Applications/Install\ macOS\ High\ Sierra\ Beta.app

 

 

 

the usb name is USB

the syntax is...........

Your command its not good thats why you have an error

Why your not try to copy and paste the command

Share this post


Link to post
Share on other sites

 

I told you this is not a USB Installer like Create install media, this is a Deploy 
You need External / Internal SSD or HD External / Internal
Do not try this with a simple usb key

Share this post


Link to post
Share on other sites

@chris1111 Thanks for the assistance.  Unfortunately, my problem was not my installation method.  There is something about either my hardware or my custom files that makes High Sierra loop on me when I try to boot up.  Here's my attempt to use your installation method:

Last login: Fri Aug 11 23:28:30 on console
Michaels-HP-Envy-17:~ mnfesq$ "/Applications/Install macOS High Sierra Beta.app/Contents/Resources/startosinstall" --applicationpath "/Applications/Install macOS High Sierra Beta.app" --converttoapfs NO  --volume /Volumes/SDD-HI-SIERRA --rebootdelay 10 --nointeraction
By using the agreetolicense option, you are agreeing that you have run this tool with the license only option and have read and agreed to the terms.
If you do not agree, press CTRL-C and cancel this process immediately.
Preparing to run macOS Installer...
Preparing 20.404040...
Preparing 20.831344...
Preparing 22.573134...
Preparing 24.121392...
Preparing 25.669650...
Preparing 27.411441...
Preparing 28.766167...
Preparing 30.507957...
Preparing 32.056215...
Preparing 33.798006...
Preparing 35.346264...
Preparing 37.088054...
Preparing 38.636313...
Preparing 40.184571...
Preparing 41.926361...
Preparing 43.474619...
Preparing 45.022877...
Preparing 46.764668...
Preparing 48.312926...
Preparing 50.054716...
Preparing 51.409442...
Preparing 53.151233...
Preparing 54.893023...
Preparing 56.441281...
Preparing 57.796007...
Preparing 59.150733...
Preparing 60.698991...
Preparing 62.440782...
Preparing 63.989040...
Preparing 65.730830...
Preparing 67.279088...
Preparing 69.020879...
Preparing 70.569137...
Preparing 72.117395...
Preparing 73.472121...
Preparing 75.213912...
Preparing 76.762170...
Preparing 78.310428...
Preparing 79.858686...
Preparing 81.600476...
Preparing 83.148735...
Preparing 84.890525...
Preparing 86.245251...
Preparing 88.180574...
Preparing 89.728832...
Preparing 91.277090...
Preparing 92.232464...
Preparing 93.204273...
Preparing 95.139595...
Preparing 96.687854...
Preparing 98.429644...
Preparing 99.797980...
Preparing 100...
Waiting to reboot for 10 seconds...
Preparing reboot...
System going down for install...

This did absolutely nothing.  However, I did try to install DP4 over DP1.  Do I really have to wipe my High Sierra partition clean in order to install?  I have made lots of settings adjustments to my liking that I would have to start over from scratch if that is required for the startosinstall method to work.

Share this post


Link to post
Share on other sites

@chris1111 Thanks for the assistance.  Unfortunately, my problem was not my installation method.  There is something about either my hardware or my custom files that makes High Sierra loop on me when I try to boot up.  Here's my attempt to use your installation method:

Last login: Fri Aug 11 23:28:30 on console
Michaels-HP-Envy-17:~ mnfesq$ "/Applications/Install macOS High Sierra Beta.app/Contents/Resources/startosinstall" --applicationpath "/Applications/Install macOS High Sierra Beta.app" --converttoapfs NO  --volume /Volumes/SDD-HI-SIERRA --rebootdelay 10 --nointeraction
By using the agreetolicense option, you are agreeing that you have run this tool with the license only option and have read and agreed to the terms.
If you do not agree, press CTRL-C and cancel this process immediately.
Preparing to run macOS Installer...
Preparing 20.404040...
Preparing 20.831344...
Preparing 22.573134...
Preparing 24.121392...
Preparing 25.669650...
Preparing 27.411441...
Preparing 28.766167...
Preparing 30.507957...
Preparing 32.056215...
Preparing 33.798006...
Preparing 35.346264...
Preparing 37.088054...
Preparing 38.636313...
Preparing 40.184571...
Preparing 41.926361...
Preparing 43.474619...
Preparing 45.022877...
Preparing 46.764668...
Preparing 48.312926...
Preparing 50.054716...
Preparing 51.409442...
Preparing 53.151233...
Preparing 54.893023...
Preparing 56.441281...
Preparing 57.796007...
Preparing 59.150733...
Preparing 60.698991...
Preparing 62.440782...
Preparing 63.989040...
Preparing 65.730830...
Preparing 67.279088...
Preparing 69.020879...
Preparing 70.569137...
Preparing 72.117395...
Preparing 73.472121...
Preparing 75.213912...
Preparing 76.762170...
Preparing 78.310428...
Preparing 79.858686...
Preparing 81.600476...
Preparing 83.148735...
Preparing 84.890525...
Preparing 86.245251...
Preparing 88.180574...
Preparing 89.728832...
Preparing 91.277090...
Preparing 92.232464...
Preparing 93.204273...
Preparing 95.139595...
Preparing 96.687854...
Preparing 98.429644...
Preparing 99.797980...
Preparing 100...
Waiting to reboot for 10 seconds...
Preparing reboot...
System going down for install...

This did absolutely nothing.  However, I did try to install DP4 over DP1.  Do I really have to wipe my High Sierra partition clean in order to install?  I have made lots of settings adjustments to my liking that I would have to start over from scratch if that is required for the startosinstall method to work.

You do not need to format the drive, it will install over  EDIT**  ➤ if its a HFS+J Install

 

I do not know what you will lose and what you will not lose because I have always done clean install but I know that you can do an update this way
EDIT**
For Update HS I have always used Apple Menue and thats working good here

Share this post


Link to post
Share on other sites

Kinda OT but not, I'm looking for a good reliable USB Bluetooth adaptor for my desktop that supports High Sierra, Sierra and windows, linux would be a bonus as well. Any suggestions?

Share this post


Link to post
Share on other sites

Kinda OT but not, I'm looking for a good reliable USB Bluetooth adaptor for my desktop that supports High Sierra, Sierra and windows, linux would be a bonus as well. Any suggestions?

I'm using the ASUS BT400, works OOB in Sierra and High Sierra (with patch to enable handoff + continuity support).

It works without the need of installing any drivers in Windows 10 and Linux too

Share this post


Link to post
Share on other sites

After updating to pb4 (dp5), I'm getting a new device in the sidebar called "Remote Disc". There's no trace of it anywhere other than the sidebar. It can be neither ejected nor removed.

 

Did you try: Open Sharing preferences (choose Apple menu > System Preferences, then click Sharing). Unselect the Remote disc Sharing checkbox

Share this post


Link to post
Share on other sites

I'm using the ASUS BT400, works OOB in Sierra and High Sierra (with patch to enable handoff + continuity support).

It works without the need of installing any drivers in Windows 10 and Linux too

 

​Yeah i have an ASUS BT400 too here. And its a very good product, although much more expensive than a BT CSR4 module which is like... only $2 on ebay. So I would recommend just buying that anyhow first of all. Then if it don't work, you've given it a shot but only lost $2 there. Which is literally nothing. Then buy the ASUS BT400.

Share this post


Link to post
Share on other sites

Does anyone has an Idea how to fix this error?

 

Using a Asus X299-A with an i7 7800X

post-2203181-0-11157400-1502583588_thumb.jpeg

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By midi-sama
      After a long time of cooking this computer up with a lot of stuff, I'm finally releasing my guide for this P50 with OpenCore.
       
      Lenovo ThinkPad P50 macOS Install with OpenCore
       
      This thread may be used for questions/corrections/additions. Good Luck.
    • By Rohan20
      Opencore is running really really slow on Catalina 10.15.4. So It was running perfectly before I put the ssdt-pnlf for enabling Brightness control. it is running really slow and I verified my config with the sanity checker and its all correct. can someone please help. I am attaching my oc folder.

       
      https://www.dropbox.com/s/drkek0eaz19ina5/OC.zip?dl=0
       
    • By RyzenDude
      Hi everyone,
      Today I finished my High Sierra install with OpenCore. I got everything up and running but I can't seem te get rid of this text on te boot screen while booting up. Does anyone have a solution to this?
      Thanks in advance!
      Hardware:
      CPU: Ryzen 5 1600
      GPU: GTX 980
      RAM: 16 GB DDR4 2666 MHz
      Motherboard: ASUS EX-A320M-GAMING
      Audio Codec: AppleALC
      Ethernet Card: Realtek RTL8111
      Bootloader: OpenCore 0.5.5

    • By Sagnik Ganguly
      Hello I'm Sagnik Ganguly, I'm trying to dual boot macOS 10.14 and Windows 10 (already installed) on a PC with Legacy BIOS. I've two hard drives one in where the windows is installed and another which is converted to GPT to install macOS Mojave 10.14 with a partion of Mac OS Extended (Journal) or APFS but when I went to the Install Disk Selection page, I'm selecting the partition but it says "This version of macOS 10.14 cannot be installed on this computer." can you help me please? 
      P. S. My motherboard doesn't support UEFI. 
      I'm attaching some pictures of the screens.


    • By y010204025
      Disclaimer: All files of this article are from itpwd.com and rehabman ’s github.com

       
      After Testing:
       
      Graphics card: NVIDIA K1000M / K2000M / K2100M / K3000M / K3100M / K4000M / M1000M (ordinary TN1600x900 or 1920x1080), AMD W5170M / W7170M (DC2 or 4K), Intel HD4000 (ordinary TN1600x900 or 1920x1080) can be driven normally, but NVIDIA graphics card Brightness adjustment is disabled. AMD W5170m and w7170m are the best choices on 8570W and 8770W. The brightness can be adjusted normally and the graphics performance is very good. For WX7100m and WX4170m, the graphics card fans cannot be controlled, and other methods are required to control the fans. CPU: 3rd generation Intel Core i3, i5 and i7 (Ivy Bridge architecture, including all dual-core and quad-core. Celeron and Pentium are not supported), frequency conversion is normal. In general: If you have 8570W, 8770W, and hope you can get the best Hackintosh experience, it is recommended to replace the CPU with i7-3840QM / i7-3940XM, 8570W is recommended to choose W5170M, 8770W, and it is recommended to choose W7170M. In addition: If you want to have a 4K experience or perfect HIDPI, W5170m / W7170M supports 4K output, you can choose a suitable 4K screen to replace, but because 4K screens are mostly edp interface, and 8570W / 8770W motherboard is lvds interface, This requires a custom screen cable, which seems to be a difficult choice, but you can choose to do it yourself or buy it separately. In China, taobao.com is almighty and may be more suitable for you than eBay.
       
      EFI features:
      out of the box, the relevant hardware can be driven after the OS is installed, and it is easy to use without code operation.
      Supported models: HP EliteBook 8470p, 8570p, 8570w, 8770w (click the model for official specifications)
      Wireless network card: Recommended: BCM94360cd (requires ipex4 to ipex1,3 antenna 1300mbps), BCM94352HMB / DW1550 (2 antennas, 867mbps)
      Wireless characteristics: no white list, wireless network card with Bluetooth does not support the Bluetooth function of the wireless network card (also does not need to shield the pins), but the wireless normal use, you need the Bluetooth function to use this machine comes with Bluetooth:
      Clover version: 5103, keyboard mapping has been added Command key = Alt key, Option key = Win key
      Supported systems: macOS Mojave 10.14.6 (18G103)-macOS Catalina 10.15.x,
       
      Notes on known issues:
      1. The touchpad and the left and right keys under the touchpad are normal, the pointing stick and the left and right keys above the touchpad are temporarily unavailable (recommended to use the second generation of Apple Magic Trackpad)
      2. Indicator display problem (can be ignored, function is normal): Caps light is sometimes not switched in time, mute / wireless key may be yellow
      3.AMD graphics card / Intel nuclear display has supported sleep and 15 levels of brightness adjustment, NVIDIA has no
      4. If the AMD graphics card enters Huaping, refer to editing the Clover startup parameters, and add the Boot parameter radpg = 15 (the EFI file that has been configured with this parameter has been uploaded, refer to the following EFI-guided download link)
      5. Using the above NVIDIA graphics card with a normal TN screen 1600x900 or 1920x1080 can not enter the installation interface, please check whether the VBiOS of the graphics card is exclusively for HP, thank you for your test face K1000M
      6. Due to product design defects, the MSata positions of 8570w and 8770w cannot be used as boot disks, so EFI boot can only be placed on the main hard disk (turn the machine over and open the hard disk in the lower left corner of the cover, which is the main hard disk). Put on msata plate
      +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
      Hardware requirements:
      Model: 8470p, 8570p, 8570W, 8770W 1 or more, it is recommended to use another notebook for emergency Hard disk: It is recommended to choose an SSD hard disk of 240g or more. Samsung or Intel SATA hard disk is a good choice. Wireless card: BCM94352HMB, DW1550, BCM94360CD, miniPCIe slot U disk: 1 for 16g and above, another winPE emergency USB disk is recommended If you use a rescue USB flash drive, it means that you read this post carefully
       
      Make and install a USB flash drive:
      Get the mirror: please do it your way Making and installing a USB flash drive: macOS command line production is recommended, whether it is a real macOS model or a virtual machine (although this is not allowed to be discussed in many forums)Or you can choose to use TransMac or ether under Windows. This is not recommended, but it is simple enough for those new to Hackintosh. Make boot U disk: If you know how to put the boot into the installation U disk, unzip the EFI file and put it in the EFI partition, or you can choose a fat32 format U disk to store the EFI file separately Note: EFI is an unzipped folder, not a zip or ISO suffix file.
       
      BIOS settings From RehabMan
      To start, set BIOS to defaults.
      Then insure:
      UEFI boot is enabled (hybrid/with CSM for best result) secure boot is disabled disable fast boot IGPU graphics memory set to 64mb, if available disable the serial port via BIOS option, if available disable "LAN/WLAN switching", if available disable "Extended Idle Power States" if you find it under "Power Management Options" disable "Wake on LAN" and "Wake on USB" disable Firewire/IEEE 1394, if your laptop has it for Skylake and KabyLake laptop, enable "Launch Hotkeys without Fn keypress" Note: If you have a laptop with switchable graphics, leave it enabled. You can still use it on Windows, although the discrete card will be disabled when running OS X by the ACPI patches provided here. If you want to also disable it in Windows (via BIOS option), make sure you read about the DGPU option in your model specific SSDT (source is in SSDT-HACK.dsl), as in the scenario where the DGPU is disabled by BIOS, DGPU should be set to zero.
       
      Install:
      Please modify according to the above BIOS settings: Press F9 after booting, select the boot efi to file option, which is generally the last item. Enter your boot USB disk to find the location of cloverx64.efi, select cloverx64.efi, press Enter, and enter the clover boot interface. Select the location of the install entry and press Enter. Enter the macOS interface, use the disk tool to format the partition you need to install to hfs + or apfs format, do not choose the encryption option, this will make your efforts in vain. Note: The disk must be in gpt format, and the remaining EFI space is greater than 200M, 300mb + is recommended. If it is not, please try to modify it in WindowsPE environment. This may cause you to lose the Windows system boot and disk data. Please prepare for backup.
      After formatting the partition successfully, close the disk tool and select install, you will find the partition you installed, and follow the interface prompts. When the installation reaches a certain progress, it will restart. When restarting, select F9, enter from the boot U disk, select the disk partition where you installed macOS (no longer the U disk installation), the installation will continue, and it may restart 2 ~ 3 times Every time, you need F9 to select the boot. After entering the installation interface, except for the first installation, select the U disk, and then select the disk installation partition. Eventually you will enter the settings interface. After following the interface prompts, you will enter the macOS system interface. Remember the system password and turn off the Find my mac option.  
      Post install:
       
      After the installation is complete, you need to hang the EFI partition of the disk, copy the EFI file of the U disk to the EFI partition of the disk, so that you can directly use the disk to boot, otherwise you need to select the U disk to boot each time. The mount tool can choose cloverconfigurator. If after copying the EFI file to the disk, the computer cannot recognize your clover boot, you can use the custom boot option of bios: set the custom boot path to \efi\clover\cloverx64.efi, and set it as the first boot, Use bootice or easyUEFI to increase the clover boot option under Windows and set it as the first boot. If you do not have a wireless network card available temporarily, you can use the USB binding function of your Android phone to share the network. This may require the HoRndis driver. It is not recommended to use a US wireless network card. If you need Windows or Linux, you can install it normally. Be careful not to let Windows overwrite your boot files.  
      For other uses of macOS and brew, please pay attention to forums and other communities. Hackintosh is just the beginning.
       
      Finally, I would like to thank rehabman, vit9696 and others who contributed to Hackintosh. I also thank Cwen for his efforts to modify files and hardware tests. I hope that Hackintosh will be eternal.
       
      Please comply with the laws and regulations of your country or region. My description may not be clear or professional, but I think it is necessary. I think the existence of Hackintosh is everyone's technical hobby and experience macOS, not as a substitute for macOS cheap hardware.

      EFI_8x70_5103_W7170m_20200116 .zip
×