Jump to content
MaLd0n

[Guide] Sierra / High Sierra on GA Z170M-D3H / DSDT

68 posts in this topic

Recommended Posts

A while back I experienced the same and found that the 960 tops the max of Blackmagic speed test. Someone suggested AJA and it gave the proper readings. Now, it still might be that Blackmagic has the max at 2000. If that's the case the AJA might be of service. If not then AJA should show the same readings and, obviously, there's something wrong.

 

 

A while back I experienced the same and found that the 960 tops the max of Blackmagic speed test. Someone suggested AJA and it gave the proper readings. Now, it still might be that Blackmagic has the max at 2000. If that's the case the AJA might be of service. If not then AJA should show the same readings and, obviously, there's something wron

 

post-1039385-0-20706000-1503174553_thumb.jpg

Share this post


Link to post
Share on other sites
Advertisement

 

13196_big.png

 

-Create a bootable copy of macOS Sierra

Flash Drive Maker.zip

Check out the link

http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/

 

-Install Clover UEFI in USB stick

https://sourceforge.net/projects/cloverefiboot/files/Installer/

 

-Replace Folder

CLOVER INSTALLATION.zip

 

-Install Sierra and boot into system!

 

-Install Clover UEFI and replace with my folder

CLOVER POST INSTALLATION.zip

 

-Reboot and activate video!

 

Bingo!

 

Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!

 

If you need DSDT edits for Skylake...

-Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen)

-Post Ioreg, extract with Ioreg Explorer

IORegistryExplorer.app.zip

-Run it, post files generate in your desktop

RunMe.app.zip

 

-DSDT bios F21

My DSDT with patches for skylake

DSDT.GA Z170M-D3H F21.zip

 

-Patches

-FIX ERRORS AND WARNINGS
-HPET
-SATA
-DMAC
-SLPB
-DARWIN
-LPC
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-RTC
-IRQs
-SBUS
-MIKEY
-BLC0
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-LAN
-USBX
-PMCR
-EC
-PNLF
-HDMI 
-SSDT

https://github.com/Piker-Alpha

run in terminal

 

01.png

01A.png

01AA.png

01B.png

02.png

03.png

Captura de Tela 2017-05-22 às 20.46.49.png

-Ioreg

iMac de Mac.ioreg.zip

-Clear NVRAM, Purge and Kextcache

Olarila.command.zip

-FakeSMC

http://www.hwsensors.com/releases

-Audio

https://github.com/vit9696/AppleALC

-USB

https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads

-LAN

https://github.com/Mieze/IntelMausiEthernet

 

Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders![/

 

Hello I made a successful installation with clover you shared. Everything works very well. How should the settings for the MacOS 10.13 beta installation be?

Share this post


Link to post
Share on other sites

same files

 

update post later with 10.13 ;)

I'm getting the error in the picture. In 10.13 beta 5 setup

 

6bb62cd2eca371cc40f88fc95c39788d.jpg

 

 

Tapatalk kullanarak iPhone aracılığıyla gönderildi

Share this post


Link to post
Share on other sites

Maldon, could you please help me to enable HDMI audio on my GTX1070? I really need it. My mobo is the same of the topic. thanks

Share this post


Link to post
Share on other sites

 

 
-Create a bootable copy of macOS Sierra
Check out the link
 
-Install Clover UEFI in USB stick
 
-Replace Folder
 
-Install Sierra and boot into system!
 
-Install Clover UEFI and replace with my folder 
 
-Reboot and activate video!
 
Bingo!
 
Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!
 
If you need DSDT edits for Skylake...
-Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen)
-Post Ioreg, extract with Ioreg Explorer
-Run it, post files generate in your desktop
 
-DSDT bios F21
My DSDT with patches for skylake
 
-Patches
-FIX ERRORS AND WARNINGS
-HPET
-SATA
-DMAC
-SLPB
-DARWIN
-LPC
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-RTC
-IRQs
-SBUS
-MIKEY
-BLC0
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-LAN
-USBX
-PMCR
-EC
-PNLF
-HDMI 

-SSDT

run in terminal
-Clear NVRAM, Purge and Kextcache
-FakeSMC
-Audio
-USB
-LAN
 
Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!

 

 

Is it posible to upload the DSDT and the clover folder for High Sierra?

Share this post


Link to post
Share on other sites

sa,e files, just update kexts for new versions and usb port limit patch too

Mald0n you will make  all this amazing packet for high Sierra too? Thanks.

Share this post


Link to post
Share on other sites

Hey, 

Thanks for great guide and sharing your files. I tried to install it on i5-6600k, and GA-Z170-D3H with BIOS F21a (seems to be quite same, the only fix is HT) and after putting DSDT.aml to EFI/CLOVER/ACPI/patched my system hangs on "fakesmckeystore started". What can be issue with it? I updated all KEXTs and fakeSMC to latest versions for High Sierra, but still no luck, internet also not giving much informations... 

I can put IOReg later on, because currently I'm in work, but maybe you MaLd0n have some idea what it can be. I'm out of options here

Thanks in advance.

Share this post


Link to post
Share on other sites

dont use my DSDT, old bios version here

 

extract ur original table and post here

 

press f4 in clover boot screen, generate files in origin folder


Mald0n you will make  all this amazing packet for high Sierra too? Thanks.

same files, just change usb port limit abd update applealc, etc

Share this post


Link to post
Share on other sites

;)

use some patches in config.plist

GFX0 to IGPU
47465830 
49475055 

HDAS to HDEF
48444153 
48444546 

HECI to IMEI
48454349 
494d4549 

if u can a full cosmetics, need a ioreg, but essentials done

Share this post


Link to post
Share on other sites

no problem ioreg in 3...2....1:

 

and before i forget it my config.plist

what makes me confused:

GFX0 to IGPU ---> okay

but there a some other configurations in my config (remove battery from desktop, i know that desktops doesn't have any battery).

Arquivo Comprimido.zip

ye, dont need it

Share this post


Link to post
Share on other sites

okay man u r incredible ;)

next step (before i crash my system what i don't like anymore)

the right save direction for the dsdt is under :

efi\clover\acpi\patched?


I test it out (i'm not the most patient on this little world ;) )

worked.

Great job, if u have time can u explain how it is possible to solve the dumb compile errors in MaciASL?

And what for what exactly are the changes in the config.plist?

Share this post


Link to post
Share on other sites

efi\clover\acpi\patched?

Yes, take a backup Clover folder

Great job, if u have time can u explain how it is possible to solve the dumb compile errors in MaciASL?

need check what error ;) use acpi6,1

BNUM error, just remove line

And what for what exactly are the changes in the config.plist?

we renamed devices in DSDT, like HDAS to HDEF and other tables(SSDT) have a device HDAS too, we need use this patch to rename it in all tables and avoid boot fail

Share this post


Link to post
Share on other sites

Can someone help me to create a dsdt file for my hackintosh? I'm on HS right now and my audio is broken, tried everything and nothing works but I've read that a dsdt file should fix the problem.

 

my setup is 

gigabyte ga-z170m-d3h

i5 6600k 

gtx1060 6gb evga

 

here's the link to my ACPI, IOreg and Clover folders.

http://www38.zippyshare.com/v/ZzkLtDa4/file.html

 

thanks in advance. (I'm totally noob in dsdt etc)

Share this post


Link to post
Share on other sites

Can someone help me to create a dsdt file for my hackintosh? I'm on HS right now and my audio is broken, tried everything and nothing works but I've read that a dsdt file should fix the problem.

 

my setup is 

gigabyte ga-z170m-d3h

i5 6600k 

gtx1060 6gb evga

 

here's the link to my ACPI, IOreg and Clover folders.

http://www38.zippyshare.com/v/ZzkLtDa4/file.html

 

thanks in advance. (I'm totally noob in dsdt etc)

CLOVER.zip

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By glasgood
      CLOVER DUAL BOOT MOJAVE & WINDOWS 10 GUIDE 
       

       
       
      INCLUDES  MBR / LEGACY BIOS  TO  GPT / EFI CONVERSION
      USING MBR2GPT TOOL
       
       
      PREREQUISITE: Two physical discs ( SSD’s or HDD’s )
       
       
       
       
       
      STEP 1 - Clover dual boot configuration 
       
      Open config.plist with Clover Configurator
       
      Boot
       Legacy = PBR Timeout = True ( will remove the Timeout countdown, from Clover boot menu)  

       
      GUI 
      Scan / Custom
       Entries = True  Tool = True  Legacy = False ( removes extra Windows 10 entries )  
      Hide Volume
      - Preboot ( macOS Preboot )
      - Recovery ( macOS Recovery )
       

       
      So at boot you will have two options: boot macOS Mojave or Windows 10 
       
       
       
       
       
       
       
      ————————————————————
       
       
      STEP 2 - Using a drive without Windows 10 installed
       
      Disconnect system drive that contains your macOS Mojave install from computer ( This is so that Windows does not overwrite existing macOS Mojave boot loader )
       
      Proceed with a Windows 10 UEFI install.  
      After installation reconnect macOS Mojave Drive, the Windows installation should now be detected and usable in Clover. 
      If Windows 10 is not detected or able to boot,  then verify you installed Windows 10 as UEFI and not MBR ---->  ( Read step 2 - For a drive with Windows 10 installed )
       
       
      OR
       
       
       
      STEP 2 - Using a drive with Windows 10 already installed
       
      Verify your Windows install is  GPT / UEFI or MBR / Legacy BIOS.   
      If Windows install is GPT UEFI then Windows 10 install is ready to use at Clover boot menu, you should be able to boot into Windows directly from Clover boot screen. 
       

       
       
      But if  Windows drive is detected at Clover boot screen, but when booting Windows you get a black screen with a cursor on the top left,
      then this is most likely because Windows drive is MBR ( Legacy BIOS ).  You can easily convert MBR to GPT using  Windows MBR2GPT tool ( this saves hours work having to reinstall Windows 10 and setting up all your applications again  ) 
       
      If Windows 10 install is MBR / Legacy BIOS  then simply convert to GPT / UEFI  following instructions below ( read video summary and view video )
       
       
      ** To use Windows 10  MBR2GPT tool  you must have Windows 10 version 1703 ( creators update  ) or later and less than 3 partitions on 
      the Windows 10 drive **
       
      Video summary:
       
      Confirm Windows 10 drive is MBR Legacy BIOS ( in Windows Disk Management ) Reboot into Windows PE ( Advanced Startup ) Convert from MBR Legacy BIOS to GPT UEFI ( using commands below ) mbr2gpt /validate mbr2gpt /convert Restart Verify Windows 10 drive has changed to GPT UEFI ( in Windows Disk Management )  
       
       
       
      After conversion Windows 10 is ready to use at the Clover boot menu 
       
       
       
      STEP 3 - Stop Windows Boot manager from overriding Clover boot manager
       
      How to stop Windows boot manager from overriding your Hackintosh Clover boot manager when using dual booting between macOS and Windows
       
       
       
       
       
       
    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?f=45&t=9172
       
      ---USB---
      https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By AppleBytes
      Hello,
      I'm working on a re-install of OSX on a dell inspiron 9400. I was finally able to get a copy of SL on it. But it still needs MUCH work, as the graphics (NVIDIA Geforce Go 7800) isn't properly recognized -- either by model, or installed VRAM.
      It has 512Mb, but only initializes 256Mb VESA.
      Anyway, as a start, I thought it best to use a valid dsdt.dsl for compilation, and start there. I've managed to remove all the warnings, and errors save 2
      OUTPUT:
      # sudo iasl -ta ./dsdt.dslll Intel ACPI Component Architecture ASL Optimizing Compiler version 20110527-64 [May 27 2011] Copyright (c) 2000 - 2011 Intel Corporation ./dsdt.dslll   3519:                                 Return (0x00) Error    4080 -           Invalid object type for reserved name ^  (found INTEGER, requires Buffer) ./dsdt.dslll   3956:                     Return (Package (0x00) {}) Remark   5072 -         Effective AML package length is zero ^ ASL Input:  ./dsdt.dslll - 4997 lines, 158533 bytes, 1633 keywords Compilation complete. 1 Errors, 0 Warnings, 1 Remarks, 577 Optimizations I'm attaching a copy of the above output, and the dsdt.dsl file in a tarball to this post in hopes someone with the required knowledge can help me fix it.
      FWIW
      SMBIOS I'm using indicates this is a MBP 3,1
      cpu: cd2 (T7400 @2.16Ghz)
      graphics: NVIDIA Geforce Go 7800 ( G70M? )
      ram: 4Gb
      dell inspiron 9400 (Laptop)
       
      Thank you for all your time, and consideration!
       
      --Chris
       
      DSDT-DSL.tar
    • By fantomas1
      Hi InsanelyMacaholics   

      Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS Sierra.
       
      10.12.6
      Nvidia Web Driver - 378.05.05.25f16 --> build 16G2016 (thanks to Cyberdevs) New!
      Nvidia Web Driver - 378.05.05.25f15 --> build 16G1918 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f14 --> build 16G1917 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f13 --> build 16G1815 (thanks to flowrider)
      Nvidia Web Driver - 378.05.05.25f12 --> build 16G1710 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f11 --> build 16G1618 (thanks to Frank Nitty)
      Nvidia Web Driver - 378.05.05.25f10 --> build 16G1510 (thanks to BreBo) 
      Nvidia Web Driver - 378.05.05.25f09 --> build 16G1408 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f08 --> build 16G1314 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f07 --> build 16G1314 (thanks to haring)
      Nvidia Web Driver - 378.05.05.25f06 --> build 16G1212 (thanks to WeBeRiO)
      Nvidia Web Driver - 378.05.05.25f04 --> build 16G1114 (thanks to lukazm)
      Nvidia Web Driver - 378.05.05.25f03 --> build 16G1036 (thanks to Gradou)
      Nvidia Web Driver - 378.05.05.25f01 --> build 16G29 (thanks to Badruzeus)
       
       
      10.12.5
      Nvidia Web Driver - 378.05.05.15f01 --> build 16F73 (see this post)
       
       
      10.12.4
      Nvidia Web Driver - 378.05.05.05f02 --> build 16E195(thanks to crachmaster4999)
      Nvidia Web Driver - 378.05.05.05f01 --> build 16E195 (thanks to Moviemakergr)  Pascal support!!!
      Nvidia Web Driver - 367.15.10.45f01 --> build 16E195 (thanks to Lanc)
       
       
      10.12.3

      Nvidia Web Driver - 367.15.10.35f01 --> build 16D32 (thanks to shatterhenner)
       
       
      10.12.2
      Nvidia Web Driver - 367.15.10.25f02 --> build 16C68 (see this post)
      Nvidia Web Driver - 367.15.10.25f01 --> build 16C67 (see this post)
      Nvidia Web Driver - 367.15.10.25b06 --> build 16C60b/16C63a (see this post)
       
       
      10.12.1
      Nvidia Web Driver - 367.15.10.15f03 --> build 16B2657/16B2659 (thanks to Moviemakergr).
      Nvidia Web Driver - 367.15.10.15f01 --> build 16B2555 (thanks to Moviemakergr)
       
       
      10.12.0
      Nvidia Web Driver - 367.15.10.05f01 --> build 16A323 (thanks to phi777)
       
       
      GM
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A323 (same driver since DP4/PB3)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A322 (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A320 (see this post)
       
       
      DP/PB
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A313a (DP8 & PB7) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A304a (DP7 & PB6) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A294a (DP6 & PB5) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A286a (DP5 & PB4) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A270f (DP4 & PB3) (thanks to TheRacerMaster)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A254g (DP3 & PB2) (see this post)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A238m (PB1) (thanks to Faun) 
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A239j (DP2) (thanks to Faun)
      Nvidia Web Driver - 367.05.10.05b03 --> build 16A201w (DP1) (thanks to Xmedik)
       
×