Jump to content
Sign in to follow this  
Followers 0
SomeCompyterNerd

USB Installer MacOS 10.12 - Intel core i7-6700k - GTX 960 - Asus Z170A

25 posts in this topic

Recommended Posts

So i have created a mac os 10.12 install media with the --createinstallmedia command in terminal, i installed clover onto the USB plugged it into my machine, the machine has an Asus Z170A with 16gb DDR4 Memmory, a GTX 960 SSC. I have Execute disable bit and VT-d disabled, i have XHCI Handoff enabled. The installer wont boot and pauses at System Uptime in nanoseconds: xxxxxxxxx

 

Here is a screenshot, Im not sure if this says anything or not but any help is much appreciated!

 

 

post-2003240-0-45923300-1495483510_thumb.jpg

Share this post


Link to post
Share on other sites
Advertisement

okay! Got it all installed but i installed the Web drivers for my GTX 960.  I get a white cross on bootup when  added NvidiaWeb to my config. Here is the Verbose boot.

http://imgur.com/a/drYTg

Share this post


Link to post
Share on other sites

remove my DSDT inside Clover/Acpi/Patched, dont use DSDT from other mobo model

 

press barspace, go to acpi patching, dsdt name put dsdt02.aml

Share this post


Link to post
Share on other sites

remove my DSDT inside Clover/Acpi/Patched, dont use DSDT from other mobo model

 

press barspace, go to acpi patching, dsdt name put dsdt02.aml

I didn't use your DSDT I used a config.plist that was similar to my build. Here is the Config file. I did add NvidiaWeb as a new <key>. \

Im away from home atm but i will post the config asap.

Share this post


Link to post
Share on other sites

1- Replace full folder, dont change nothing

attachicon.gifCLOVER.zip

2- Update Clover

attachicon.gifClover_v2.4k_r4077.pkg.zip

3- Reboot

4- Send me ioreg

attachicon.gifIORegistryExplorer.app.zip

https://1drv.ms/u/s!AtkCeEw8tjPZwnLR9k4aM5Lj2PDk

 

I did what you said. Video acceleration works flawlessly, i can boot independently now. Everything is almost fully functional. Messages even launches! Above is a fresh "RunMe" app recording.

Share this post


Link to post
Share on other sites

It's nice!

What not work?

usb 3.0 doesn't function. Also how do I add a windows boot entry to clover. I have windows 10 on an SSD. I can boot it with my bios boot selector but cannot get it to show in clover.

Share this post


Link to post
Share on other sites

Ive managed to solve the USB 3 issues. I still need a new boot entry added into clover.

Here is the .ioreg file.

https://1drv.ms/u/s!AtkCeEw8tjPZwnM0_nr8EErhVVlL

Replace DSDT in Clover/Acpi/Patched

DSDT.final.zip

U dont need managed nothing, all in DSDT and Clover folder

 

Many tutorials about "add windows entry in clover", check in search forum

Share this post


Link to post
Share on other sites

Replace DSDT in Clover/Acpi/Patched

attachicon.gifDSDT.final.zip

U dont need managed nothing, all in DSDT and Clover folder

 

Many tutorials about "add windows entry in clover", check in search forum

Hey my USB 3 issues are back again..... I have managed to get a boot entry for windows though

Share this post


Link to post
Share on other sites

Hey so now that my wireless solution has arrived in the mail. i cannot "Turn on" the card inside of mac os. It is detected by system report. ANy suggestions.?

THe model of the card is a (BCM940360CD)

Share this post


Link to post
Share on other sites

check search forum. i think have a solution ;)

I am unable to Get it to work. Ive changed the country code of the wireless card. Im not sure if there is maybe a kext missin? Not sure. ITs detected in sys report...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tluck
      Lenovo T460 macOS with Clover Guide
      Latest Release on GitHub (October 2019) Updated to Clover r5097 Updated Lilu kexts - ALC, WEG Merged Verleihnix' config.plist - especially to NOT inject GFX Updated BacklightInjector as option to WEG Added new DSDT patch for Catalina
        Various Tweaks over Last months The zip file is a complete Clover ESP (/EFI) bundle and kext pack for the Lenovo T460. The current file bundle is tested on Sierra. 
      Note: I never got the GFX fully working on El Capitan. 
      Full Clover file set - config.plist etc. Includes all custom kexts Includes custom DSDT/SSDT scripts and patches Utility scripts The zip bundles are posted to GitHub: https://github.com/tluck/Lenovo-T460-Clover/releases
      Caveat: The T460 systems used here was configured with: i5-6300U, Intel HD Graphics 520, 1920x1080 touch screen. If you have a different system model, then extract the ACPI files and use the included scripts to create a set of files consistent with your system type and BIOS version. See below for details.
      Credits: RehabMan, Shmilee, vusun123, TimeWalker, Mieze from which, much of their work and help is/was was used to get the T460 to this point.
      Devices and aspects working:
      Ethernet -  Intel I219LM is enabled via IntelMausiEthernext.kext WiFi/BT - substitute the Intel WiFi/BT with a compatible Broadcom or Atheros chip Audio - ALC293 codec implemented via AppleALC.kext (old AppleHDA_ALC293 and CodecCommander kexts are not needed) PS2 - ClickPad + TrackPoint + all 3 buttons - using a modified VoodooPS2Controller to support new layouts - and added some custom Fn key maps based on 440/450 dsdt USB - implemented via custom SSDT + USBInjectAll kext. All USB3/USB2 ports are intel-based and work -  3 external USB and internal Camera, BT, etc  Sleep/Wake - the sleepwatcher package and custom sleep/wake scripts are used to help with sleep/wake for BT and PS2 devices. Note: have not tried to implement the SD card reader - no driver found.
      ACPI Files
      New Installation - Steps and Details
      Part 1 - OS Installation
      Part 2- Post OS Installation and Setup
      Notes on Custom Kexts
       
    • By Andres ZeroCross
      First i will give you information about my specification
       
      Processor : Intel Core i7 6700
      Motherboard : Gigabyte GA-Z170-HD3
      RAM : Team DDR4 8GB (2X4GB) 2133Mhz - up to 3000Mhz at XMP Profile
      Graphics Card : Palit Jetstream GTX960 4GB DDR5
      SSD and HDD : Fujitsu F200 for System + 500GB Seagate connect with add on PCI-e to Sata 3 Asmedia ASM1062 Chipset
      Other harddrive : 1 Natno SSD, 2x 2TB Seagate, 2x 500GB Seagate connect with internal SATA Controller Interface
      Wifi Card : TP-Link TL-WDN4800
      Monitor : 2x Asus VN248H (HDMI and Display Port with Converter)
      I need 2 new hardware to support this
      a. PCIe to Sata with 2 Ports Sata (because i use 2 important storage)
      b. PCI to USB 2.0 with NEC Chipset (i Plug USB Keyboard, Mouse and USB Installer here)
       
      My steps :
      1. Make USB installer El Capitan 10.11 Public Release with CreateinstallMedia method
      2. Install Clover Rev 3280 into it
      3. Basic configuration for BIOS (Disable serial port at IO section in bios, Boot with UEFI Mode,  Primary Graphics set to PCI-E, Sata Controller = AHCI, CSM Support = Disable, OS Mode = Windows 8/10 WHQL)
      4. My Masic Configuration for Config.plist (open with Clover Configurator Version 4.24)
          ACPI = tick FixHpet, AddDTGP, FixHDA, New Way, Delete Unused, AddHDMI, Drop OEM_DSM of HDA and SATA.
          Bootflag = nv_disable=1 -v dart=0
          Devices = USB Inject, Add Clock ID, Fix OwnerShip, Audio Layout = 2, Reset HDA
          Graphics = There is no change here
          Kernel and Kext Patches = FakeCPUIID 0x00306F2 and tick KernelHasswellE (Please anybody,, i dont want use this. Latest El Capitan 10.11.1 Beta is supported native to this processor right. Help me with kernel so i don't need to use fakeCpuIID again) I I use Clover R3292 and i don't need to use FakeCPUID again,, just tick Kernel Haswell-E and it will boot. So you need to use Clover R3292 and later
          Rt Variables = BooterConfig 0x28 and CsrActiveConfig 0x067
          SMBios = First i use SMBios MacPro 6.1 but later i just need to use iMac17,1 because My System build is identical with iMac17,1 hardware (SkyLake System)
          System Parameters = Inject Kexts Detect and Tick Inject System ID
      5. Boot from Your USB Installer and do everything like normal until you get into desktop
      6. Install Kext Utility,  
      7. Copy "AppleGraphicsControl.kext" from "System/Library/Extensions" to Desktop and then edit info.plist at "AppleGraphicsControl.kext/Contents/Plugins/AppleGraphicsDevicePolicy.kext/Contents/info.plist" and look at OKitPersonalities->AppleGraphicsDevicePolicy->ConfigMap and change "Mac-F60DEB81FF30ACF6 - Config1" to "Mac-F60DEB81FF30ACF6 - None". Reinstall this kext with Kext Utility.
       
      Note : the reason you need to "Config1" of "Mac-F60DEB81FF30ACF6" because it's BOARD-ID for MacPro6,1. so if you use SMBios of iMac17,1 then Check your Board-Id (you can use Clover Configurator and open your config.plist and see your Board-id at SMBios Section) and change "Config2/Config1" to "none". Now i use "Mac-DB15BD556843C820" as my Board-ID because i use iMac17,1 SMBios  so i need to change ConfigMap that related to it 
       
      8. Install Nvidia Web Driver version 346.03.02f02, and restart.
      9. Change bootflag "nv_disable=1" to "nvda_drv=1"
      10. After you get into desktop, get Latest Beta Build 10.11.1 Seed. You need to change seed catalog update first (google it).
      11. Do update to 10.11.1 Build 15B38b and restart
      12. Boot again with bootflag "nv_disable=1", and copy "NVDAStartupWeb.kext" from "System/Library/Extensions" to desktop. And open info.plist at "NVDAStartupWeb.kext/Contents/Info.plist". Look at "IOKitPersonalities->NVDAStartup" and change "NVDARequiredOS - 15A284" to "NVDARequiredOS - 15B". Save,, and reinstall this kext with Kext Utility
      13. IMPORTANT, if you use SMBIOS MacPro 6.1 or iMac 15.1 and some type (I forgot) then do "7Th Step" above again.
      14. Restart and reuse "nvda_drv=1"
      15. Now you have El Capitan 10.11.1 at your SKYLAKE Computer
       
      Problem
      1. Internal Sata is still not function, it show "Intel 10 Series Chipset" but "unknown" for Harddrive Solved by Mod Bios to disable IOAPIC 24-119 Entries or Patch Apple APIC
      2. USB 3.0 is not function too, but it shot at USB System Report Solved by Mod Bios to disable IOAPIC 24-119 Entries or Patch Apple APIC
      3. When you open Browser Applications, Movies or Something like that then it will freeze for 10 seconds. I check console and i found "NVDA(Graphics): Channel exception! Exception type = 0x8 DMA Engine Error (FIFO Error 8)" Solved by Mod Bios to disable IOAPIC 24-119 Entries or Patch Apple APIC
      4. Address of Sound HDEF is different with my DSDT. Normally it should be "0x001B0000" but at my board's DSDT is "0x001F0003". So ScriptCommand of Toleda for ALC is not work anymore, we need to change that script command from HDEF-B to HDEF-F (just look at the script)
      5. We need to change Device HDAS to HDEF at address "0x00fF0003", but something weird after 5times my system freeze and i look at Audio System Report it suddenly show all of AUDIO Interface , before not. Solved by Mod Bios to disable IOAPIC 24-119 Entries or Patch Apple APIC
      6. I look at my Graphics/Displays Sytem report and at PCIe Lane Width, it show "x4" or "x8". Damn,, it should be "x16". It will random change after freeze from "x4" or "x8" My bad, i just need to plug out and plug in again. Just assembly case
       
       
       
      Maybe Rehabman, Slice and Pike R. Alpha want to help me
       
      Well,,
      i attach my file (Darwin Dumper File) <<<<< Before Patched, and
      i attach my DSDT + SSDT + Config.plist <<<<< After Patched and working well
       
       
       
      Before Patch
       
      Before Mod Bios / Patch 1

       
       
      Before Mod Bios / Patch 2

       
      Before Mod Bios / Patch 3

       
      Before Mod Bios / Patch 4

      =================================================================================================
      AFTER PATCH
       
      After Mod Bios / Patch 1

       
       
      After Mod Bios / Patch 2

       
       
       
      After Mod Bios / Patch 3

       
       
      After Mod Bios / Patch 4

       
      After Mod Bios / Patch 5

       
      After Mod Bios / Patch 6

       
      After Mod Bios / Patch 7

       
      Z170-HD3-CF.zip
    • By Andres ZeroCross
      First my Old Threads is here http://www.insanelymac.com/forum/topic/308178-el-capitan-wih-i7-6700-skylake-gigabyte-ga-z170-hd3-palit-jetstream-gtx960/

      My Computer Specifications
      1. Processor : Intel Core i7 6700
      2. Motherboard : Gigabyte Z170-HD3
      3. VGA Card : Palit Jetstream GTX960 4GB DDR5
      4. Wifi Card ; TP-Link TL-WDN4800
      5. PCI-E to Sata = Bafo PCI-e to 2 Sata3 and 2 e-Sata
      6. PCI to USB 2.0 - NEC Chipset
      7. Main Harddisk Harddisk : Fujitsu SSD 120GB + Seagate 500GB that plug into Bafo PCIe to Sata3
      8. Other Harddisk : Natno SSD 12GB, 2x Seagate 2TB, Seagate 500GB, all of it are plug into onboard Sata Chipset Controller (But Unknow at El Capitan / 10th Intel Chipset)
      9. RAM : Team 3000Mhz 8GB (2x4GB)
      10. Display : Asus VN248H
      11. Clover version : 3280

      My Step :
      1. Because Internal Sata Chipset and USB 3.0 are not supported yet, so i clone my Fujitsu 120GB SSD from my Hacbook Asus X455LA that already installed El Capitan Build 15B30a with Carbon Copy Cloner
      2. I use MacPro 6.1 as SMBIOS and use FakeCPUIID of Intel 4790k (0x0306C3)
      3. Remove CPUSensor.kext from "FakeSMC.kext/Contents/Plugins" if you don't do this it will be stuck at ACPI log verbose.
      4. I try boot from USB that already install Clover 3280 and it boot. I use "-v nv_disable=1 dart=0"
      5. Then at desktop, i install nvidia web driver 346.03.02F02 (before that you need to modif it,, use pkgutil --expand bla bla ba,, google it and change required os to "15B" then use pkgutl --flatten bla bla to repackage) then i change info plist from AppleGraphicsControl.kext/Contents/Plugin/AppleGraphicsDevicePolicy.kext/Contents/info.plist and change line that contain board-id of MacPro 6.1 from Config2 to none
      6. Then i install that kext,, and restart
      7. i use "-v dart=0 nvda_drv=1 and it will need more time than usual to get login form,, yeah i did it. But there is some bugs
       
      Bugs :
      1. Internal sata is not function
      2. USB 3.0 is error too,,  at verbose i see "error mantisa log"
      3. Sometimes my system get freeze for a few seconds. I thinks this is error from Nvidia web driver,, i see nvdia error log from "sudo dmesg"

      At last,, sorry for my bad english
      Thanks
       
      This is for screenshots
       

       

      I upload my IOREG and DSDT
       
       
    • By Drovosek
      Hey.
      I have a Dell Vostro 3267 system unit. It has a Skylake processor Intel Core i5-6400 with integrated graphics Intel HD 530, 8 GB RAM, 256 GB SSD. The monitor is connected via HDMI.
      I faced a problem that if I enter Hackintosh in a sleep mode, and then I press something on the keyboard, the system unit wakes up (I hear as coolers begin to turn), but the monitor does not react in any way.
      I tried to disconnect and reconnect the HDMI cord, tried to inject EDID in config tried to change SMBIOS on MacMini8,1, but it did not change the situation.
      How to solve the problem?
       
      P.S.
      All in Mojave 10.14.6
      CLOVER.7z
    • By End3rPower50
      Hi, I want to install MacOS Catalina on my laptop.
      I was installed MacOS Mojave previously but i had a lot of problem, for example my wifi's card (Dell DW1820A) had a problem: My pc sometimes doesn't boot up or pc after some minutes crashed or slowed. 
      Now i want to try again to install macOS.
       
      this is my spec: 
      HP 15-AY034NL 
      CPU: i7 6500U  with HD520
      SSD: 500GB SSD Samsung
      Wifi & Bluetooth: Dell DW1820A (Bluetooth: BCM2045A0) (Wifi: BCM94350ZAE)
      USB 3.0 
      Ethernet: Realtek 8100
       
      Attached in this thread, my old clover configuration created by me (CLOVER OLD) and clover with Wifi driver (CLOVER) created by Hervè (I had asked help at insanelymac's community)
       
      P.S SORRY FOR MY BAD ENGLISH.
      Thanks in advance 
      -ANTONIO
      CLOVER OLD.zip
      CLOVER.zip
×