Jump to content
cydia2020

[Solved] Skylake non-K overclock Install problem

10 posts in this topic

Recommended Posts

Hi guys

 

I am currently facing some problems here

I got a tower with:

  • MSI Z170A SLI PLUS board
  • G.Skill 32GB DDR4 Memory
  • Intel i5 6500 Overclocked to 4.51GHz
  • Gainward GTX 1060 6GB

Here is the BIOS files I am using

 

Windows are working extremely fine here, stable temperature, no thermal throttling

Ubuntu also works after disabing c-state in grub using

intel_idle.max_cstate=0

I cannot seems to get macOS 10.12 working with the overclocked chip, macOS works complete fine without overclock

The symptoms are the same if I didn’t add the boot argument in Linux, no USB, No hard drive, no signal output from monitor, no nothing

 

The question is:

How do I disable C State complete while CLOVER executing the EFI file?

seems it's a Darwin/Unix/Linux Kernel limitation.

 

Thanks a lot :)

 

Update: Solved, see post #10

Edited by cydia2020
No caps bro - It's not necessary =D

Share this post


Link to post
Share on other sites
Advertisement

Did you already tried create a custom SSDT for your CPU?

Hi mate

No I didn't tried it yet, but I will give it a try

 

Thanks

Share this post


Link to post
Share on other sites

add is last line

sudo ~/ssdtPRGen.sh -turbo 4510

4.51GHz ;)

Thanks mate, I will try when I get home. Finally there's a solution!

Share this post


Link to post
Share on other sites

add is last line

sudo ~/ssdtPRGen.sh -turbo 4510

4.51GHz ;)

Hi mate, I finally got through the problem while booting the EFI file.

The keyboard lights on and the system continue to boot, but I got another problem.

VM Swap Subsystem is On

I leave all the other options including virtualization setting untouched, and reset the overclock, and it got over, very interesting.

I think Intel just doesn't like us to overclock the chips that wasn't "designed" to be overclocked.

 

What do you reckon the solution is for this one?

 

Thanks  :D

Share this post


Link to post
Share on other sites

U can post ur files here?

-Post ur full Clover folder with original tables, press F4 in Clover Boot Screen, files generate in Clover/Acpi/origin
-Post Ioreg, extract with Ioreg Explorer
-Run it, post files generate in ur desktop

Share this post


Link to post
Share on other sites

 

U can post ur files here?

-Post ur full Clover folder with original tables, press F4 in Clover Boot Screen, files generate in Clover/Acpi/origin
-Post Ioreg, extract with Ioreg Explorer
-Run it, post files generate in ur desktop

 

Okay, I can only do it tomorrow, thanks for the quick reply!

Share this post


Link to post
Share on other sites

So guys I figured it out

Simply add 

cpuidle=0

and

idlehalt=0

in the boot args, please add those 2 args, it won't work with only one although they might share similar function

 

Thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tluck
      Lenovo T460 macOS with Clover Guide
      Latest Release on GitHub (November 2019) Updated to Clover r5099 Updated Lilu based kexts - Lilu, ALC, WEG Added acidanthera VoodooPS2 kext v2.0.4 moved the older 1.9 to the Misc Folder as an option.
        Various Tweaks over Last months The zip file is a complete Clover ESP (/EFI) bundle and kext pack for the Lenovo T460. The current file bundle is tested on Sierra. 
      Note: I never got the GFX fully working on El Capitan. 
      Full Clover file set - config.plist etc. Includes all custom kexts Includes custom DSDT/SSDT scripts and patches Utility scripts The zip bundles are posted to GitHub: https://github.com/tluck/Lenovo-T460-Clover/releases
      Caveat: The T460 systems used here was configured with: i5-6300U, Intel HD Graphics 520, 1920x1080 touch screen. If you have a different system model, then extract the ACPI files and use the included scripts to create a set of files consistent with your system type and BIOS version. See below for details.
      Credits: RehabMan, Shmilee, vusun123, TimeWalker, Mieze from which, much of their work and help is/was was used to get the T460 to this point.
      Devices and aspects working:
      Ethernet -  Intel I219LM is enabled via IntelMausiEthernext.kext WiFi/BT - substitute the Intel WiFi/BT with a compatible Broadcom or Atheros chip Audio - ALC293 codec implemented via AppleALC.kext (the old AppleHDA_ALC293 and CodecCommander kexts are not needed) PS2 - ClickPad + TrackPoint + all 3 buttons - using a modified VoodooPS2Controller to support new layouts - and added some custom Fn key maps based on 440/450 dsdt USB - implemented via custom SSDT + USBInjectAll kext. All USB3/USB2 ports are intel-based and work -  3 external USB and internal Camera, BT, etc  Sleep/Wake - the sleepwatcher package and custom sleep/wake scripts are used to help with sleep/wake for BT and PS2 devices. Note: have not tried to implement the SD card reader - no driver found.
      ACPI Files
      New Installation - Steps and Details
      Part 1 - OS Installation
      Part 2- Post OS Installation and Setup
      Notes on Custom Kexts
       
    • By ricardos7
      Preciso de ajuda para terminar um meu hackintosh, alguém poderia me ajudar?
       
      Boa tarde a todos, gostaria de ajuda com o meu hackintosh, estou fazendo um hack em um notebook Dell 5557, as configurações estão abaixo.
       
      ESPECIFICAÇÕES TÉCNICAS
      Processador
      Modelo: Intel Core i7 - 6ª Geração Intel Core i7-6500U
      Velocidade: 2.5 GHz até 3.1 GHz com Max Turbo Cache: 4Mb
      Memória RAM Quantidade: 16GB DDR3L 1600MHz (2X8).
      Armazenamento Capacidade: 240 GB SSD
      Tela Tamanho:15.6” Resolução: FULL HD 1920x1080p Touch
      Webcam integrada de alta definição (720p) com microfone digital
      Gráfico Integrado Intel HD 520
      NVIDIA® GeForce 930M com 4GB DDR3 Dedicada
      Áudio Realteck 

      Dell Wireless 1705 WiFi
      1x  HDMI 1.4ª
      2x USB 3.0
      1x USB 2.0
      1x Ethernet 10/100 RJ-45
      1x Entrada de Cartão 5 em 1 (SD, SD 3.0, SDHC, MS e MS PRO)
      Leitor de Cartão
      Tipo: SD, SDHC, SD3.0, MS, MS Pro
      Alimentação Bivolt 3 células 43Wh
       
      Os problemas que encontrei ate agora foram.
      O que não funciona?
      WIFI
      AUDIO
      BRILHO DA TELA
      BLUETOOTH
      GERENCIAMENTO DE ENERGIA NAO SEI COMO SABER SE FUNCIONA
      GRAFICOS DEDICADOS NVIDEA 930M
       
       
      O QUE FUNCIONA?
      GRAFICOS INTEL
      TECLADO
      TRACKPAD
      TECLAS FN
      PLACA DE REDE
       
      AS DSDT E AS SSDT?
      Nao sei como fazer para esse modelo mais ja extrai as originais mais nao sei quais arquivos usar e quais pachs ativar,
      alguém poderia me ajudar a terminar esse hack por favor. Desde ja obrigado.




    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F10, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8700k, 9600k, 9700k, 9900k
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.1Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Nitro+ SE Vega56 ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 16GB @3200mhz (2 x 8GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.1
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      CLOVER EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F10 to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f10.zip - Z390 MASTER Bios Revision F10
       
      Use this folder with igpu Enabled in bios for working Sidecar (Updated 1st Nov)
      AudioGods Z390 Master Vega Navi EFI.zip - Vega 56/64 Navi & Radeon VII DSDT
      AudioGods Z390 Master RX EFI.zip - RX Series DSDT
       
       
      ADDITIONAL DSDT's  (A big thanks to @MaLd0n for compiling these DSDT's)

       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://olarila.com/forum/viewtopic.php?f=19&t=1131 
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F10)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 512MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS
       

       

       

       

       

       

       

       

       

       

       
       
    • By JamesMaloney
      Salve a tutti,
      ho provato diverse volte ad installare macOS sul mio laptop ma sempre senza successo, non riesco mai ad arrivare nemmeno all'installer!
      Ho tentato ormai diverse configurazioni/driver ma non capisco mai da cosa siano derivanti gli errori o i blocchi che mi trovo davanti e sto quindi cercando aiuto per capire come procedere 
      Nello specifico il config che sto provando ad utilizzare non mi trova per niente la partizione con l'installer, mentre un altro vecchio (presente sempre nella cartella di clover allegata con estensione .orig) si inchioda subito dopo la scelta della partizione di avvio.
      Qualcuno mi sa dare una mano su come superare ciò?
      Grazie in anticipo,
       
      Giacomo
       
       
      P.S. Le mie specifiche sono:
       
      - Modello ASUS N552VW-FI202T
      - Schermo 3840x2160
      - CPU Intel Core i7-6700HQ
      - RAM 16GB ddr4 2400mHz
      - Intel HD Graphics 530 + nVidia 960m 4GB (anche funzionasse solo la Intel sarebbe perfetto)
      - SSD 256GB
      - HDD 1TB
      CLOVER.zip
    • By BuXb
      SleepOnLowBattery (“SOLB”)
      by BugsB, based on a script by Toggi3 * + more code snippets from the www
       
      For those of us whose HackBook (or even real MacBook) doesn't automatically and properly go into power saving mode on very low battery but just powers down coldly, crashing macOS: “SOLB”, a small and RAM/ CPU wise very low footprint AppleScript based utility that checks the battery level every 2 minutes, running via daemon in the background.
       
      You can choose between two versions, either with or without sound. Both display a notification in the top right of your screen.
       
      Between ≤10 and >8% battery charge:

       
      Between ≤8 and >5% battery charge:

       
      On ≤ 5% battery charge you will see a 10 seconds countdown dialog box in 1 second intervals:

       

       
      which you can cancel, or have your your *ac*Book be sent to sleep when down to 0.
       
      The version with sound uses the pleasant macOS US female voice Allison. If the lady is not installed, you can download "her" via System Preferences, Accessibility, Speech (pane tab should get opened by the install script), click onto the two arrows to the right of System Voice, Customize, English (Unites States) -- Female, activate Allison, OK (macOS downloads voices to /System/Library/Speech/Voices - Allison consumes 120 MB).
       
      If you want to see/ see and listen first, disconnect your Mac from its power supply and double click the “run Demo” file in either folder, with or without sound.
       
      The launcher is installed per user, so one user can use the script with and another user the script without sound.
       
      Run your desired install.command, with or without sound. The script should be active right away without restart.
       
      Regarding the sound version, you can also:
      - download any other English voice of your liking and edit the name inside the script at the very top
      - download any language voice and translate the text inside the script
      Edit with Apple Script Editor, save, install, reboot.
       
      Tested working in macOS High Sierra 10.13.6, Mojave 10.14.6 and Catalina 10.15.1.
      Please feedback if this utility also works for you.
       
      If you have ideas, experience bugs, etc., please contribute as precise, succinct, productive and friendly as possible. In case of a bug, always include your version of macOS for me or others to try and help. Thank you.
       
      ENJOY
       
      VERSION HISTORY:
      2019-11-15 v. 1.1
          •    BUG FIX: changed all occurrences of ExternalChargeCapable to ExternalConnected in all Apple Script .scpt files (SleepOnLowBattery.scpt, SleepOnLowBatterySound.scpt, demo.scpt) to restore functionality
          •    IMPROVEMENT: made queries of MaxCapacity and CurrentCapacity more compatible to work with hopefully any system
          •    NEW: added Catalina compatibility to install scripts; verified Mojave compatibility
          •    NEW: Sound script uses voice Allison if installed, otherwise automatically defaults back to another English standard voice (Daniel, Alex or Fred)
       
      2018-11-10 v.1.0
          •    initial version
       
      IDEAS TO IMPLEMENT IN FUTURE RELEASES:
      Have the sound version install script check if Allison is installed, and if not, offer to download and install it. Purely cosmetic: find a way to have the display notification in the top right of the screen not display the Script Editor icon but the one of the utility without turning the utility into an app but by maintaining a script to keep the load footprint low. This is currently neither possible with an Apple Script nor with an Apple Script Bundle file, only with the script compiled into an app. One possibility might be a Perl approach, if someone volunteers. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      * Thanks to Toggi3 for the base script:
      https://hints.macworld.com/article.php?story=20110219013713667
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      THE CODE (of the version with sound):
      install.command:
       
      LaunchAgent SleepOnLowBatterySound.plist:
       
      Script SleepOnLowBatterySound.scpt:
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
       
      SleepOnLowBattery (SOLB) by BugsB v.1.1 (2019-11-15).zip
×