Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tokia
      Hello,
       
      My desktop Hackintosh is running macOS Mojave 10.14.2 with two dedicated GPUs installed: NVIDIA GTX 1080 Ti, AMD Radeon HD 7970.
       
      The AMD GPU is used primarily under macOS and the NVIDIA one under Windows.
       
      macOS boots without issues as long as there are no displays connected to the NVIDIA GPU. If a display is connected then the display connected to the AMD GPU will become blank. The system can be accessed using Screen Sharing/VNC.
       
      There are no problems if I swap PCI-e slots for the GPUs so that the AMD GPU is in the first slot (primary GPU), but I prefer not to do this.
       
      I have tried to remove the whole PCI (bridge) device in the DSDT file and all the lines that refer to it. The PCI entries in ioreg and System Information are gone but System Information still shows an NVIDIA GPU under Graphics/Display.
       
      Many of the suggestions I have found in guides and forum posts do not seem to apply here. My problem with some of the guides and answers is that they give the solution without explaining how anything works, or they tell you what to do without explaining the reasons behind it.
       
      What else can I do? Thank you for any assistance you can provide!
       
      I have attached some files that may help you help me.
       
      DSDT_BIOS_3101.zip contains the original ACPI (*.aml) files without any patches.
      Send me Steffens-iMac.zip is a file produced by RunMe.app, and do contain simple patches to rename some devices.
      DSDT.dsl.patch is a diff of the original DSDT.dsl file and the one with the PCI devices removed (commented out).
       
      Motherboard: ASUS Rampage V Extreme (X99), BIOS version 3101 (macOS does not boot with anything newer).
      Clover version: 4644 (macOS does not boot with the latest one, 4798).
       
      DSDT.dsl.patch:
      --- /Users/sl/Desktop/DSDT_BIOS_3101/DSDT.dsl 2018-12-17 05:24:30.000000000 +0100 +++ /Volumes/EFI/EFI/CLOVER/ACPI/patched/DSDT.dsl 2018-12-17 16:52:08.000000000 +0100 @@ -5,7 +5,7 @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of DSDT.aml, Mon Dec 17 05:24:30 2018 + * Disassembly of DSDT.aml, Mon Dec 17 04:01:52 2018 * * Original Table Header: * Signature "DSDT" @@ -2128,7 +2128,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2274,7 +2274,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2420,7 +2420,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2570,7 +2570,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2803,12 +2803,14 @@ If ((CSTA (Arg0, Arg1) == 0x00)) { FLAG = 0x00 - PRID (APID = 0xFF) = 0xFF + APID = 0xFF + PRID = 0xFF } Else { Local0 = APID - PRID (FLAG = 0x01) = Local0 + FLAG = 0x01 + PRID = Local0 } Return (APIC) @@ -15259,7 +15261,7 @@ ^BR2B.OSHP () ^BR2C.OSHP () ^BR2D.OSHP () - ^BR3A.OSHP () + //^BR3A.OSHP () ^BR3B.OSHP () ^BR3C.OSHP () ^BR3D.OSHP () @@ -26861,7 +26863,7 @@ } } - Device (BR3A) + /*Device (BR3A) { Name (_ADR, 0x00030000) // _ADR: Address OperationRegion (MCTL, SystemMemory, 0xE0013188, 0x04) @@ -27496,7 +27498,7 @@ { Name (_ADR, 0xFFFF) // _ADR: Address } - } + }*/ Device (BR3B) { @@ -30267,7 +30269,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -30567,21 +30569,21 @@ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4158, // Range Minimum - 0x0000, // Range Maximum + 0x4158, // Range Maximum 0x0000, // Translation Offset 0x0001, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x5758, // Range Minimum - 0x0000, // Range Maximum + 0x5758, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x5858, // Range Minimum - 0x0000, // Range Maximum + 0x5858, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) @@ -37604,7 +37606,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -37904,21 +37906,21 @@ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4558, // Range Minimum - 0x0000, // Range Maximum + 0x4558, // Range Maximum 0x0000, // Translation Offset 0x0001, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4259, // Range Minimum - 0x0000, // Range Maximum + 0x4259, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4359, // Range Minimum - 0x0000, // Range Maximum + 0x4359, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) @@ -44941,7 +44943,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -45241,21 +45243,21 @@ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4958, // Range Minimum - 0x0000, // Range Maximum + 0x4958, // Range Maximum 0x0000, // Translation Offset 0x0001, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4559, // Range Minimum - 0x0000, // Range Maximum + 0x4559, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4659, // Range Minimum - 0x0000, // Range Maximum + 0x4659, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) @@ -53823,7 +53825,7 @@ Notify (\_SB.PCI0.BR2D.H007, Local0) } - If ((\_SB.PCI0.BR3A.PMEP == 0x01)) + /*If ((\_SB.PCI0.BR3A.PMEP == 0x01)) { Local0 = \_SB.PCI0.BR3A.PMEH (0x05) } @@ -53848,7 +53850,7 @@ Notify (\_SB.PCI0.BR3A.H005, Local0) Notify (\_SB.PCI0.BR3A.H006, Local0) Notify (\_SB.PCI0.BR3A.H007, Local0) - } + }*/ If ((\_SB.PCI0.BR3B.PMEP == 0x01)) { @@ -54608,11 +54610,11 @@ \_SB.PCI0.BR2D.PMEP = 0x01 } - If ((Local1 == 0x07)) + /*If ((Local1 == 0x07)) { \_SB.PCI0.BR3A.PMES = 0x01 \_SB.PCI0.BR3A.PMEP = 0x01 - } + }*/ If ((Local1 == 0x08)) { @@ -54879,10 +54881,10 @@ Notify (\_SB.PCI0.BR2D, 0x02) } - If ((\_SB.PCI0.BR3A.DEVS () != 0x00)) + /*If ((\_SB.PCI0.BR3A.DEVS () != 0x00)) { Notify (\_SB.PCI0.BR3A, 0x02) - } + }*/ If ((\_SB.PCI0.BR3B.DEVS () != 0x00)) { @@ -55927,10 +55929,10 @@ { Notify (\_SB.PCI0.BR2D, 0x00) } - Case (0x28) + /*Case (0x28) { Notify (\_SB.PCI0.BR3A, 0x00) - } + }*/ Case (0x29) { Notify (\_SB.PCI0.BR3B, 0x00) @@ -56736,11 +56738,11 @@ } } - Scope (_SB.PCI0.BR3A) + /*Scope (_SB.PCI0.BR3A) { Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { - If ((Arg0 == ToUUID ("e5c937d0-3553-4d7a-9117-ea4d19c3434d") /* Device Labeling Interface */)) + If ((Arg0 == ToUUID ("e5c937d0-3553-4d7a-9117-ea4d19c3434d") / * Device Labeling Interface * /)) { If (((Arg1 == 0x02) && (Arg2 == 0x00))) { @@ -56765,7 +56767,7 @@ 0x00 }) } - } + }*/ Scope (_SB.PCI1.QR1A) {  
      DSDT_BIOS_3101.zip
      Send me Steffens-iMac.zip
      DSDT.dsl.patch
    • By Nizzlay
      First time trying an hackintosh, and I've been stuck like this for days now, nothing I try seems to have any effect. I can't even get the installer to launch..

      My build:
       
      Intel i7 8700K Gigabyte Aorus Z370 Ultra Gaming 2.0-OP Gigabyte Aorus Radeon RX570 4G Corsair Vengeance LPX 32GB (2x 16GB) Samsung 970 Evo 500GB be quiet! Silent Base 600 be quiet! Dark Rock Pro 4 be quiet! Dark Power Pro 11 550W I've tried creating an install USB using this vanilla guide: https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/
      I seem to get to about 50% loading the installer. Then it will get kernel panic.

      Trying with macos 10.14.2.

      Here's a video of what happens: https://nizzlay.stackstorage.com/s/4r71CXWCenNCgX9
       


      Any advice would be greatly appreciated!
    • By ehijon
      Assemblato da me con le seguenti componenti tutte acquistate rispettando la lista compatibilità.
      Usato poco, principalmente per qualche ora serale tornando a casa dal lavoro per video editing (fluido in 4K con Premiere Pro).
      Mai un problema, sostituita pasta termica 2 mesi fa. Sempre tenuto in condizioni di pulizia interna. Vendo per cambio lavoro. 

      - i7 6700K 
      - NVIDIA GTX 970 G1 Gaming Edition 
      - 32GB RAM Ballistix Sport (Aumentabili a 64GB) 
      - Gigabyte GA-Z170X-UD5 TH Scheda Madre 
      - RAM Corsair vengeance PRO DDR4 16GB 2666 MHz 
      - Corsair CX750M 
      - Corsair Hydro H60 
      - Corsair Mid-Tower Carbide 300R 
      - Fenvi 802.11AC Desktop Wifi Card 802.11 A/B/G/N/AC Bluetooth 4.0 
      - Samsung 850 EVO SSD 
      - Seagate 3TB 

      Fornisco anche i kext per renderlo stabile.

      Appena preso ho realizzato questo video in YT, che ha un po' di visualizzazioni. per spiegare come sistemare i 3 bug di installazione e renderlo stabile.

      PREZZO 1.400 euro
      (Spedizione inclusa.)
       
      Regalo la tastiera Apple Magic Keyboard originale.
      Regalo pasta termica nuova per processore.

      Spedisco nel case originale
       
       
    • By Gymnae
      Since I'm an NVIDIA user, I won't update until the farce with NVIDIA's web drivers for Mojave is solved - but this guide works already for 10.14
       

      Introduction
      The H370 chipset powers 8th generation Intel Core-i CPUs. Even though the name H370 rings comparable to Z370, the H370 is based on newer silicon. This it also requires some new approaches compared to the Z370. An example would be on-die USB 3.1 and WiFi support.
       
      Since this guide is not a "hold-your-hand-every-step" guide, I assume you know:
      Clover installation and configuration How to create an install medium for MacOS Access and configure the BIOS Have heard of ACPI patching (I'm a newb at this myself)  
      What works
      Sleep (via DSDT edits and emulated NVRAM) On-board Audio (via AppleALC and native AppleHDA) Native power management (without any kext or patch) All USB ports (and only those present are active) iGPU for both acceleration and display dGPU (I'm running an Nvidia GTX 1080)  
      Untested
      NIC --> I'm using WiFi only  
      What doesn't work
      Native NVRAM via AptioMemoryFix.efi DMVT Pre-alloc higher than 64MB (but not necessary)  
      Community additions
      User @Panzerschiffe added a helpful post, altering this guide for user with AMD cards and not needing on-board sound.
      He also runs Mojave, which I don't run yet.
       
       
      Changes to the guide:
      22.5.18: Added SSDT hot-patching to enable sleep, replacing DSDT static patching as an alternative.
      23.5.18: Add iMac18,1 as alternative SMBIOS config for those relying on the iGPU for output
      25.6.18: Added update info
      28.8.18: Small changes for clarity, changed info for afps loading & updated USB patch for 13.6
      04.10.18: Update to Mojave will come once Mojave is more mature
      02.12.18: Removed unnecessary patches, fakepciid and audio patch method & linked to AMD post & added whatevergreen.kext as replacement for previois GPU kexts
       
      1. Installation
      This guide heavy inspired by the work of /u/corpnewt of /r/hackintosh and his (sorta) Vanilla guide
       
      1.1 Create the install media for MacOS
      Follow this, if you are using a Mac to start off with. If you are totally new to MacOS, then please check the basic guide Creation of an installer media in windows or linux
       
      1.2 Install Clover on the install media
      Using the Clover installer, ensure you are installing to the USB medium you are using for the installer.
      Chose the following options, leaving the others on default: 
       
      UEFI driver: AptioMemoryFix UEFI driver: ApfsDriverLoader UEFI booting only Install to ESP  
      You have to get your hands on an apfs.efi. A google search can help, or extracting it from the Installer package. Make sure you procure a version matching the MacOS version you are about to install. Place the apfs.efi in drivers64UEFI.
       
      1.2 Adjust the config.plist for the installer
      You can use the config.plist attached as a guideline, but take a look at it before and at least adjust the SMBIOS - otherwise it won't boot.
      Attention: The attached plist contains audio patches introduced by a post-install step. If you run into problems, you might remove those. It also contains a manual slide value, which should normally not be needed, but works fine for me. It is also tuned for usage with an Nvidia Pascal dGPU as main GPU.
       
      The config you create now should serve you nicely for install and running the system.
       
      Take care of adding the following basics:
      SMBIOS: iMac18,3 - You can generate a serial number via Clover Configurator. The creation of a proper SMBIOS is covered in many guides to good extend Note: If you aim at using the iGPU for output, a user reported that iMac18,1 works better - since iMac18,3 produces sever flicker. Look at the graphics section and adjust the injection for Intel to your situation  
      Fixes

      Patches

      Devices

      Graphics
      Important:
      Change 0x59120003 to 0x59120000 if you don't use a dGPU as your main display Driver and instead use the iGPU for output.
      Also note. SMBIOS iMac18,1 has been reported to work better in this configuration. But 18,3 works fine for me.

      Kernel and Kext patches
       
      1.3 kexts and friends
      Add the supplied SSDT-UAIC.aml to "patched" - it limits the injected USB Ports to the actual number and ports valid for this board.
       
      Required kexts on "Other":
      FakeSMC.kext Whatevergreen.kext Lilu.kext AppleALC.kext IntelMausiEthernet.kext in case you're running Ethernet USBInjectAll.kext with the HCI-300-series-injector.kext --> These two should be installed to /L/E after install  
      We are leaving sound out at the moment, this is something for post-install.
       
      1.4 Check BIOS and install
      You should be ready for install. But before you reboot, please take a look at your BIOS and set it up accordingly (copied from the aforementioned guide and adapted):
      Load Optimized Defaults Disable VT-d setting If your system has Secure Boot Mode, disable it Set OS Type to Windows 8/10 or OtherOS - I have not seen a difference Turn off internal Serial and Parallel port Turn off Network stack for boot Turn off wake-on-lan (for now) Set XHCI Handoff to enabled Don't enable decode over 4G Depending on your GPU, set priority for boot Set internal GPU (iGPU) to enable - not auto or disabled Set DMVT pre-alloc min to 64MB and max to 128MB. For this selection to appear you might need to reboot after setting iGPU to enable Set USB legacy to enabled Activate XMP profile 1 f your Ram has it (mine doesn't and I added the timings manually) Set ERP to enable, disable platform power management (I need to do more research if this could be enabled)  
      I've attached my current BIOS config "hack2". You can place that on a fat32 drive (the EFI partition of your install USB drive might be an idea) and see if it loads. It's made for and with the F2 BIOS.
       
      The install itself should be like other MacOS Hackintosh installs with it several reboots and ensuring to select the correct boot device in Clover.
       
      2. Post-install
       
      2.1 Install clover on target
      This is a no-brainer, but install a fresh copy of Clover on your target medium.
       
      During install select again AptioMemoryFix but also additionally
      EmuVariableUefi-64.efi Install RC scripts on target volume because otherwise NVRAM doesn't seem to work
       
      After the install, copy
      config.plist contents of "Other" content of "patched" to your new clover install.
       
      2.2 Edit ACPI for slumber
      Choose one option, not both. The hot-patch is experimental, but for the moment it is stable.
       
      2.2.1 Edit DSDT
      This is necessary only once on initial install and every time, you edit or upgrade the BIOS. The DSDT.aml attached to this post might work for your system or give you a file to compare to. Don't expect it to work for you, though.
      I won't go into the details of DSDT extraction and patching. There are better guides (the linked guide is a rip-off of rehabman's guide from a different forum). Please follow such a guide to extract your ACPI data.
       
      Locate and disassemble the DSDT with the newest iasl binary you can put your hands on, then open it with MacIASL in its newest version you can find (Hint: Here is a good source) You can check if the version is new enough if MacIASL doesn't throw error upon compiling a freshly extracted DSDT.aml or DSDT.dst
       
      Add rehabmans repo (as per linked guide) and apply the following patches:
      Rename _DSM to _XDSM Fix _WAK Arg0 v2 USB3 _PRW 0x6D Skylake (instant wake) Find the CNVW device and remove the _PWR function there.
       
      Compile the DSDT and place it in "patched".
       
      2.2.2 Use SSDT hot-patching
      Instead of having to re-extract and re-patch the DSDT on every BIOS change or update, Hardware change one can also use ACPI hot-patching.
      It's a combination of config.plist patches and an SSDT, which is hot-patched into the ACPI (if I understand the process correctly)
       
      You need to add this SSDT-GPRW.aml to your Clover folder in the designated position at Clover/ACPI/patched You need to add this patch to your config.plist. It goes into the DSDT patch section  
      Note: This works for me, but the patch removes the _PRW method from all devices in the DSDT. This could have side-effects. So far, I have seen none. At the moment I'm also not applying any other patch, compared with the additional edits I made to the DSDT method before.
       
      2.3 Install kexts to system
      As mentioned in the install section, it's better to follow rehabman's instruction and install USBinjectAll.kext to /L/E:
      sudo cp -R Release/USBInjectAll.kext /Library/Extensions sudo touch /System/Library/Extensions && sudo kextcache -u / 2.4 Enable onboard Audio - Install AppleALC kext
      Make sure your EFI partition is mounted and that you have a vanilla AppleHDA kext available. See below for a guide how to get a vanilla AppleHDA if needed
      Note: Our Audio codec is ALC887 and it's running with layout ID 1.
      Download the newest AppleALC kext from here and install it together with lilu.kext from here into your usual /clover/kexts/others location. Done. No scripts or config.plist patches necessary.
      Add layout ID 1 to config.plist, if it's not there yet:
      <key>Audio</key> <dict> <key>Inject</key> <integer>1</integer> <key>ResetHDA</key> <true/> </dict> If you previously  installed any  audio patches, please follow this guide to "vanilla-ize" your install.
       
      2.4 Optional steps for Graphics
      If you have a dGPU, now it's the time to install its drivers and adjust the config.plist for it. The detaisl are specific to your GPU and thus of scope of this guide. Yet, my supplied config.plist is ready to be used with Nvidia Pascal cards and using the Nvidia web driver.
      Whatevergreen.kext helps with Intel iGPU and NVIDIA dGPU fixes.
       
      At the moment I'm also testing out a special bootflag: 'shikigva=12' to enable faster rendering in Final Cut Pro X. Without whatevergreen.kext and a shikigva bootflag, rendering in final cut seem very slow.
       
      2.4.1 Framebuffers
      If you're facing problems with output from your internal GPU, you can try the framebuffer patches listed by @BackwardMac:
       
       
      3. Updating
      Updating inside 10.3.x/ 10.4.x point updates doesn't require much attention:
      Download the update from the AppStore as any Mac would do Allow the system to reboot Before booting MacOS with Clover, make sure to disable extra drivers for dGPUs which require non-native support. If using an Nvidia dGPU: Remove "nvda_drv=1"  from your boot arguments and disable Nvidia injection If using a non natively supported AMD card, do the same for AMD (I'm not using AMD, thus I cannot be specific) Boot into the newly created Install MacOS partition Repeat this process until the Install partition is gone Boot MacOS again, still following 3., and potentially install updated drivers Your Audio might require re-patching  
      4. ToDo
      Move away from static DSDT patching to SSDT hotpatching --> requires my work Native NVRAM --> requires developer work Audio without AppleHDA patching --> requires developer work  
      5. Thanks to
      @MaLd0nfor helping finding the right way with the DSDT
      @RehabMan, for being a legend and helping me out patching
      @toleda, for audio patches for the 300 series
      /u/corpnewt, for his superb vanilla guide
      @wmchris for his super XPS 9550 guide and introducing me to hot-patching
      @Panzerschiffe for his addition to this guide
      all the developers of clover and it's awesomeness
       
      SSDT-UIAC.aml
       
      DSDT.aml
      hack2
×