Jump to content
MaLd0n

[GUIDE] EL Capitan / Sierra / High Sierra / Mojave on Intel LGA 775 motherboards / DSDT

833 posts in this topic

Recommended Posts

Now have a Olarila app, just download app and clover folder for your Chipset!
 

Install MacOS with Olarila Image, Step by Step, Install and Post Install

 

https://olarila.com/forum/viewtopic.php?f=50&t=8685

 
First...
If you need DSDT edits...
-Extract tables with F4 key in Clover boot screen!
-Run it and send me files!
bone.png
 
Installation
--Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave
 
 
--Install Clover in USB stick
 
--Replace with my Clover folder
 
 
--Install EL Capitan / Sierra / High Sierra and boot into system!beachball.gif
 
 
Post Installation
 
--Install Clover and replace with my folder
 
 
 
--Reboot and activate video!
 
Bingo!
yoji.gif
Now you need a fine tune! DSDT Time!
idea.gif
 
My DSDT GA P35-DS3
 
 
 
Patches
-FIX ERRORS AND WARNINGS
-HPET
-SATA
-SLPB
-DARWIN
-LPC
-HDEF
-RTC
-EHCI
-UHCI
-IRQs
-SBUS
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-LAN
-EC
-PNLF

--Native Power Management

 

Use Clover, check Generate P and C States

 

--Brightness

Install .app, select the required permission and reboot. Work in F1 / F2 keys!

NativeDisplayBrightness.app.zip

MaLd0n 2018-02-03 às 00.57.24.png

MaLd0n 2018-02-11 às 21.36.47.png

https://github.com/Bensge/NativeDisplayBrightness/releases

*in some cases .app don't work, check patches in config.plist inside Clover folder Post Install

 

--AUDIO

 

Device HDEF + AppleAlc + Lilu

 

--install Lan driver by Mieze

 
-Atheros
 
 
-Intel
 
 
-Realtek
 
 
--Links
 
-FakeSMC
 
 
-Audio
 
 
-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
 
Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!
 
We're all here to have fun and learn from each other!
 
ENJOY!

 

Share this post


Link to post
Share on other sites
Advertisement

I'm having a problem getting full graphics acceleration on El Capitan 10.11.5.

 

My hardware is the same as my sig.

 

Intel DP45SG mobo

 

Intel Xeon X5640 Quad Core (This is a modded 771 to 775 processor).

 

8GB DDR3-1333MHZ  Ram

 

(EVGA) Geforce GT260 (896 MB)

 

I was only ever able to get 10.7.5 running on this machine. Mountain Lion never booted and I gave up trying to upgrade but now I see more people on here have also done the 771 to 775 mod and successfully booted to El Capitan and Sierra so I decided to give it a try. I can boot into EC with nv_disable=1. Without that flag I get a black and white zebra pattern when it finally boots. It looks exactly like the problems I was having with this board when using the same Xeon processor:

 

http://www.insanelymac.com/forum/topic/296158-upgrade-core2-duo-to-xeon-x5460-quadno-graphics/.

 

And (it's been a while) but I believe that I also had to rollback the IOPCIFAMILY and AppleACPIPlatform kext from SL to get the graphics working. The only difference is that my previous Gigabyte mobo GA-P31-3GS upgraded to Mountain Lion without a hitch-no rollbacks.

 

I see people like Husaber have a series 45 mobo and have done the 771 to 775 mod, but have an ATI card and have upgraded successfully so I'm wondering it's an Nvidia issue and an ATI card upgrade might solve the whole issue.

 

Thanks in advance.

 

I hope I did this right but here is my Clover origin file and hopefully my IO reg.

 

 

 

 

CLOVER.zip

Send me Mac Pro.zip

Share this post


Link to post
Share on other sites

OK, I replaced my Clover file with yours in my 10.11.5 EFI partition and then booted it with only -v. Although a different set of script lines from what I have been seeing the result was the same. I took some photos (sorry iphone) as it scrolled through the boot and then what the screen looks like after the boot. I forgot to mention that a few days ago I actually got to a different screen mostly light gray with a black bar through the middle and the mouse pointer showed up (finally) and it appeared to be in hi-res i.e. the maximum screen res. for this monitor..

screen shots.zip

Share this post


Link to post
Share on other sites

Sorry, but I'm new to Clover. Which Clover option do I use to mount HDD EFI partition and then replace the Clover folder when booting from the USB stick?

 

 

**I forgot to mention in my first post, but for 10.7.5, both this mobo and my Gigabyte GA-P31-3GS the graphics would be fine (acceleration,etc.) if I used my E8500 Core 2 Duo 3.16 (SLB9K (E0)). It was only when I used the Xeon Quad core that I had to roll back the kexts. I don't know if this is helps finding the errors or not but I thought I should include it.

 

 

Thanks again for all your help.

Share this post


Link to post
Share on other sites

Still no love.

 

 

Is it the NVDAResman kext that's causing the issue? I notice that if NV_disable=1 is used in -v mode it will say something like NVDAResman kext disabled because nv_disable=1. Screen shot of extensions shows it not loaded but listed. On my 10.7.5 install it is loaded.

screen v.4.zip

11.5 screen shot.nvdisable.zip

Share this post


Link to post
Share on other sites

Yes, Rampage! My P35-DS3 and 945 work great, SSD has given a new life!  :lol:  :P

 

G41M-P26, C2Q, AMD 6870, 60GB SSD. Works so so. Good for casual use. 

Share this post


Link to post
Share on other sites

G41M-P26, C2Q, AMD 6870, 60GB SSD. Works so so. Good for casual use. 

It's true! 

I'm have a lot of hackintosh, but I always remember and use the old ones. GA-945GCM-S2C, core2duo 4500 and gt220 :D

Remember the old times :P

 

G41M-P26 is a ICH7?

Share this post


Link to post
Share on other sites

U have other GPU for test?

Nothing newer than the 260 GTX. I have a 9800GT from my other system. It also had issues when I used the Xeon X5640. Do you think it's an issue with the card? Somebody on the site that I cannot name is running Mavericks on the DP45SG mobo with an ATI card. What would be a nice upgrade from the GTX260 from ATI that would boot OOB?

 

 

 

OMG! Was that Rampage Dev who just brought light into our dark corner of the internet? Funnily enough I thought about posting my problems on his site ... but then I thought .... "nahhhhh, he doesn't care about these old systems!"

Share this post


Link to post
Share on other sites

It's true! 

I'm have a lot of hackintosh, but I always remember and use the old ones. GA-945GCM-S2C, core2duo 4500 and gt220 :D

Remember the old times :P

 

G41M-P26 is a ICH7?

 

 

MaLdOn, it's time for the 771 to 775 mod! Quad core Xeons are cheap ....

Share this post


Link to post
Share on other sites

Hi, first of all I would like to thank you for your guide. And I’m asking for your help

Btw Im not total stranger to hackintoshing (ok I must admit dsdt is dark area for me :D… snow leo was my first success) but time flies techniques change and now I’m here…. having problems with Sierra :D 

 

- App Store download (version 10.12.4) created with terminal command and clover boot loader :D 

 

Second Im posting my zip with all required files for DSDT edits, because vanilla hack is happy hack :) 

 

Third, installation was very slow(used my clover folder), has taken whole night to install, but installed (must be because USB ports are reporting as 1.0 (12mb per second max speed reported in system information). 

 

Forth I'm not able to boot with your post installation clover folder (added in zip) (system takes too long to boot (on ssd) and when login screen would normaly kick in black screen is showed)

 

Im able to boot with my clover folder (added in zip) (Used on my older hack builds and tweaked per random internet guides) but problems are:

 

-Usb is bugy (unmount drive when copying, keyboard and mouse stops working) and slow USB 1.0 (usb flash drives reported as 12mbps in system information),

-Audio not working  didn’t try kexts (on older Mac versions I've used HDA enabler kext and packed AppleHDA.kext installed in S/L/E I think dsdt patch would be better :) )

- restart works (I think shutdown too)

- goes to sleep OK, but wakes up to black screen (loud fans) with flashing line. No response needs restart.

- GPU (detected as AMD Radeon HD 7xxx 2048 MB not sure about HW acc)

-CPU ok

- RAM ok

- disks I think ok

- ethernet ok

- apple wifi ok

 

Will configure serial and UUID and system ID at end (for iMessage etc… not needed for now)

 

 

BTW also just for sake of it, I’m adding my old dsdt file I’ve created-patched long time ago it worked with older OSX versions… if it can help you in some way if you are willing to create new one, or at least help me.

 

I did used that old DSDT on Sierra install first try result: waiting for root device (many usb errors and warnings). So I’ve used my clover folder without dsdt, and it installed with symptoms described above. 

 

 

 

System info:

 

MB: Asus p5w dh deluxe (bios 3002)

DISK: OSX is on ssd 250 gb, some other disks connected (I think they work :D )

CPU: Intel core 2 duo e8400 stock speed

RAM: 6 GB 800mhz ram (2+2GB+1+1GB sticks)

GPU: AMD R9 270X (should work OBB. on my clover folder works (not sure about HW acc) detected as - AMD Radeon HD 7xxx 2048 MB, on your clover folder boots to blank black screen, signal is on monitor)

WIFI BT combo: Apple original card (works OBB) with right smbios (Broadcom BCM94331CD WiFi Bluetooth Card)

Second WIFI on mb (Realtek something can be disabled not supported not needed)

LAN: Marvell 88E8053 Gigabit LAN (works OBB)

Sound chip: ALC882M (don’t work)

 

 

Thank you in advance

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By NoEnd
      Hi team,
       
      I have tried to update to security update 2019-001 multiple time with no luck, today I've booted the update with -verbose and attached videos shows the details.
       
      Appreciate your help
       
      Thanks
      Untitled.mov
    • By JhonneR
      Good morning, everyone, I'm sorry if I was wrong in choosing the topic but I need help.
      I have found it extremely difficult to mount a Hackintosh in my acer.
      Setup;
      I5 2430m 2.4 6GB RAM
      Mobo P5we0 - Intel intel Graphics 3000
      At the moment I have not found out what my audio codecs are.
      but I'll leave the link on the motherboard.
      however, my real problem is several.
      I have already used the itakos image, I have already used several images that could be installed normally and that after installing the image I do not have internet via cable or wireless.
      And another, I already looked in other forums and I know that I will be called a donkey in the logical question but I have not been able to install the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] or clover to start from the Hard Disk, so I do not know what to do.At the moment I still do not know if there has already been someone who has already installed the High Sierra or just the Sierra in this notebook model and obtained permanent success.
      If anyone can help me, I'll be grateful.
      Installations without success, but with the system already installed in ACER;
      SIERRA
      HIGH SIERRA
      MOJAVE
      All with the same symptom. Starting only by the bootable USB stick and without internet connection via cable and wireless.
      Appreciate ! Acer 5750 Official Page
    • By PixelLover
      I'm in the middle of my first hackintosh (High Sierra) on my ZenBook Pro UX501VW-US71 laptop using the Vanilla Install. I've tried using different config.plst files and I've gotten the furthest with RehabMan's own (linked here). It hangs at error message IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0.   Can anyone help me figure out what changes to make to the config.plst file for my specific laptop (which is where I assume the problem lies)   System Specs: Intel Skylake Core i7­-6700HQ 2.6 GHz Quad­core
      Intel® HD Graphics 530 Nvidia GTX 960M 2G 15.6" Touch IPS 4K Ultra­-HD display, 3840 x 2160 resolution   Kexts: AppleALC.kext FakeSMC.kext Lilu.kext USBInjectAll.kext WhateverGreen.kext  
    • By fantomas1
      Hi InsanelyMacaholics   

      Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS Sierra.
       
      10.12.6
      Nvidia Web Driver - 378.05.05.25f13 --> build 16G1815 (thanks to flowrider) New!
      Nvidia Web Driver - 378.05.05.25f12 --> build 16G1710 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f11 --> build 16G1618 (thanks to Frank Nitty)
      Nvidia Web Driver - 378.05.05.25f10 --> build 16G1510 (thanks to BreBo) 
      Nvidia Web Driver - 378.05.05.25f09 --> build 16G1408 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f08 --> build 16G1314 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f07 --> build 16G1314 (thanks to haring)
      Nvidia Web Driver - 378.05.05.25f06 --> build 16G1212 (thanks to WeBeRiO)
      Nvidia Web Driver - 378.05.05.25f04 --> build 16G1114 (thanks to lukazm)
      Nvidia Web Driver - 378.05.05.25f03 --> build 16G1036 (thanks to Gradou)
      Nvidia Web Driver - 378.05.05.25f01 --> build 16G29 (thanks to Badruzeus)
       
       
      10.12.5
      Nvidia Web Driver - 378.05.05.15f01 --> build 16F73 (see this post)
       
       
      10.12.4
      Nvidia Web Driver - 378.05.05.05f02 --> build 16E195(thanks to crachmaster4999)
      Nvidia Web Driver - 378.05.05.05f01 --> build 16E195 (thanks to Moviemakergr)  Pascal support!!!
      Nvidia Web Driver - 367.15.10.45f01 --> build 16E195 (thanks to Lanc)
       
       
      10.12.3

      Nvidia Web Driver - 367.15.10.35f01 --> build 16D32 (thanks to shatterhenner)
       
       
      10.12.2
      Nvidia Web Driver - 367.15.10.25f02 --> build 16C68 (see this post)
      Nvidia Web Driver - 367.15.10.25f01 --> build 16C67 (see this post)
      Nvidia Web Driver - 367.15.10.25b06 --> build 16C60b/16C63a (see this post)
       
       
      10.12.1
      Nvidia Web Driver - 367.15.10.15f03 --> build 16B2657/16B2659 (thanks to Moviemakergr).
      Nvidia Web Driver - 367.15.10.15f01 --> build 16B2555 (thanks to Moviemakergr)
       
       
      10.12.0
      Nvidia Web Driver - 367.15.10.05f01 --> build 16A323 (thanks to phi777)
       
       
      GM
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A323 (same driver since DP4/PB3)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A322 (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A320 (see this post)
       
       
      DP/PB
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A313a (DP8 & PB7) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A304a (DP7 & PB6) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A294a (DP6 & PB5) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A286a (DP5 & PB4) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A270f (DP4 & PB3) (thanks to TheRacerMaster)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A254g (DP3 & PB2) (see this post)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A238m (PB1) (thanks to Faun) 
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A239j (DP2) (thanks to Faun)
      Nvidia Web Driver - 367.05.10.05b03 --> build 16A201w (DP1) (thanks to Xmedik)
       
    • By bbritton
      Hi
       
      I am trying to create a clean DSDT for my new hackintosh.  It is all working very well and I hope this will make things even better.
      I have a Gigabyte Z390 AORUS MASTER,
      I9-9900K
      32 gb Ram
      gigabyte vega 64 OC
       
      I extracted the DSDT and SSDT files using F4 in Clover.  I have supplied the resulting DSDT below.  THese are the four errors I get when trying to compile in MACIasl.  ALso I am using ACPI 5.1 in maciasl.
       
      12891, 6126, syntax error, unexpected PARSEOP_NAMESEG, expecting '('
      12900, 6126, syntax error, unexpected PARSEOP_CASE
      12904, 6126, syntax error, unexpected PARSEOP_NAMESEG, expecting '('
      12913, 6126, syntax error, unexpected PARSEOP_CASE, expecting $end and premature End-Of-File
       
      I am newbie to hackintosh so am learning as much as I can as i go.  I am not a programmer so the syntax errors I am not sure what to do with yet.  Any assistance would be appreciated.
       
      Thanks
       
      DSDT.dsl
      DSDT.aml
×