Jump to content
MaLd0n

[GUIDE] EL Capitan / Sierra / High Sierra / Mojave on Intel LGA 775 motherboards / DSDT

851 posts in this topic

Recommended Posts

Advertisement

Hello Mald0n:
I also have an old notebook, the hase A550-I7, a Chinese brand notebook.
Cpu:i7 Q720
Motherboard: PM55
Memory: DDR3 1600 4G *2
Graphics Card: NV GT205M

This notebook does not support UEFI boot, I used clover to simulate UEFI boot GPT hard drive.
This is the first time I have installed Hackintosh with NV cards. I don't know how to drive NV cards.

I just successfully entered macOS and run Runme.app

https://drive.google.com/open?id=14NHBrdv0lnedDqrOWj23tc8TWC5WCG0g

Share this post


Link to post
Share on other sites
1 hour ago, visin said:

Hello Mald0n:
I also have an old notebook, the hase A550-I7, a Chinese brand notebook.
Cpu:i7 Q720
Motherboard: PM55
Memory: DDR3 1600 4G *2
Graphics Card: NV GT205M

This notebook does not support UEFI boot, I used clover to simulate UEFI boot GPT hard drive.
This is the first time I have installed Hackintosh with NV cards. I don't know how to drive NV cards.

I just successfully entered macOS and run Runme.app

https://drive.google.com/open?id=14NHBrdv0lnedDqrOWj23tc8TWC5WCG0g

https://www10.zippyshare.com/v/yNddStOM/file.html
 

Share this post


Link to post
Share on other sites

Hello! @MaLd0n, Thanks so much for compiling the DSDT last time!So far it is working good on my 10.12.6 and 10.13.4.By the way,Could u pls help me inject the built-in Mic ?I hv generated the send_me file based on the App u offered!Really appreciate your help.

My EFI:https://drive.google.com/open?id=1lqzF5QUD8E_Csr5qp8sdeSVp6UZGDjoU

5acd6cdc5ac6f_ScreenShot2018-04-06at2_18_39AM.thumb.jpg.dd2c0dda9f59daefb8ce6bf481f483c5.jpg

Archive.zip

Share this post


Link to post
Share on other sites
51 minutes ago, HurricaneX said:

Hello! @MaLd0n, Thanks so much for compiling the DSDT last time!So far it is working good on my 10.12.6 and 10.13.4.By the way,Could u pls help me inject the built-in Mic ?I hv generated the send_me file based on the App u offered!Really appreciate your help.

My EFI:https://drive.google.com/open?id=1lqzF5QUD8E_Csr5qp8sdeSVp6UZGDjoU

5acd6cdc5ac6f_ScreenShot2018-04-06at2_18_39AM.thumb.jpg.dd2c0dda9f59daefb8ce6bf481f483c5.jpg

Archive.zip

DSDT.aml.zip

what audio codec?

send me new files with new app, i update some things

RunMe.app.zip

up in zippyshare

https://www.zippyshare.com/

Share this post


Link to post
Share on other sites
1 hour ago, MaLd0n said:

Thanks MaLd0n.
I changed the SMBIOS to MacBook Pro 6,2, I don't know if it's the right model
I used your clover and found several problems:
1, there is no battery information, the top bar does not show battery information
2, Mic no signal input, the speaker is normal. There are only built-in speakers and built-in Mic in the sound setup options.

How to solve these problems?

Edited by visin

Share this post


Link to post
Share on other sites
10 minutes ago, visin said:

Thanks MaLd0n.
I changed the SMBIOS to MacBook Pro 6,2, I don't know if it's the right model
I used your clover and found several problems:
1, there is no battery information, the top bar does not show battery information
2, Mic no signal input, the speaker is normal. There are only built-in speakers and built-in Mic in the sound setup options.

How to solve these problems?

i dont apply battery patch, just check rehabman repo for it

audio/mic, is just a layout-id, check ur audio codec and change

Share this post


Link to post
Share on other sites
On 2018/4/11 at 10:58 AM, MaLd0n said:

DSDT.aml.zip

what audio codec?

send me new files with new app, i update some things

RunMe.app.zip

up in zippyshare

https://www.zippyshare.com/

@MaLd0n

Audio Codec:https://www118.zippyshare.com/v/8vCNKUqW/file.html

EFI:https://www118.zippyshare.com/v/johy7a78/file.html

Send me Clarences-iMac:https://www118.zippyshare.com/v/TxPQHp7Z/file.html

3465.jpg.d587218095018f0eaef19497e2314dbb.jpg

Could u pls help me inject the built-in Mic for my 10.12.6 and 10.13.4?Thanks so much in advance!

Edited by HurricaneX

Share this post


Link to post
Share on other sites

So I formatted the new SSD to GPT and the USB finally booted to clover. Now another problem, at clover menu i added -v -s -x nv_disable=1 npci=0x2000 PCIRootUID=1 and it booted to a complete black screen. I tried booting with just -v nv_disable=1, same thing. I used clover configurator and changed SMIOS to iMac 10,1 system definition. 

Share this post


Link to post
Share on other sites

Hello Mald0n:

Nice to meet you, I have created a post about my problem on High Sierra before and I was redirected to this guide by Allan.

As mentioned in the post, I was not able to get pass the login screen at initial boot and the system could not shutdown occasionally.

However I solve the high temperature problem when I replace the clover folder you provide on first post, currently the cpu temperature is around 5x-6x'c after 10 mins up time.

Attached is the clover folder, ioreg as well as the send me app, thanks for your help!

p.s. I notice that your clover boot efi is a old traditional grey apple boot logo, Is there a version of modern dark and white logo one that I could replace with? Thank you!


https://www.insanelymac.com/forum/topic/333867-cant-get-pass-2nd-stage-boot-logo-on-initial-boot-and-high-temperature/

 

My system:
Gigabyte GA-X48-DQ6
Core 2 Extreme QX9650 C0
4 x Kingston DDR2 800ghz Ram
Galaxy GTX460 1GB
120GB SSD Leven JS500120C, high Sierra installed
250GB seagate ST3250310AS
250GB WDC WD2500JS-08NCB1


File:

https://drive.google.com/file/d/1_k3_jxvzGaLfDzin0zSAUT5ml16Hq15c/view?usp=sharing

 

 

 

Edited by winipcfg

Share this post


Link to post
Share on other sites
On 4/25/2017 at 12:53 PM, MaLd0n said:

--AUDIO

 

Device HDEF + AppleAlc + Lilu

 

Hi Maldon, great guide! I got my old Dell 780 (LGA775) running High Sierra 10.13.4 nicely, thank you!

 

I have no audio and I see where you mention "Device HDEF + AppleALC + Lilu". I have AppleALC + Lilu in my KEXT folder but not sure what "Device HDEF" is. 


Also when it goes to sleep it takes like 2 minutes to wake. I have a Q9400 quad core + Nvidia Quadro FX580 but don't have a DSDT for it. Can you help me with a DSDT?

 

Here are my RunMe Results

https://drive.google.com/file/d/1Duv3XYyW4UhziDVVWdquwxYcGQ-D5tvm/view?usp=sharing

 

SPECS: Dell 780 MT, Q9400 2.66GHz Core2Quad Core, Nvidia Quadro FX580 

Edited by bocajoe

Share this post


Link to post
Share on other sites
9 hours ago, winipcfg said:

Hello Mald0n:

Nice to meet you, I have created a post about my problem on High Sierra before and I was redirected to this guide by Allan.

As mentioned in the post, I was not able to get pass the login screen at initial boot and the system could not shutdown occasionally.

However I solve the high temperature problem when I replace the clover folder you provide on first post, currently the cpu temperature is around 5x-6x'c after 10 mins up time.

Attached is the clover folder, ioreg as well as the send me app, thanks for your help!

p.s. I notice that your clover boot efi is a old traditional grey apple boot logo, Is there a version of modern dark and white logo one that I could replace with? Thank you!


https://www.insanelymac.com/forum/topic/333867-cant-get-pass-2nd-stage-boot-logo-on-initial-boot-and-high-temperature/

 

My system:
Gigabyte GA-X48-DQ6
Core 2 Extreme QX9650 C0
4 x Kingston DDR2 800ghz Ram
Galaxy GTX460 1GB
120GB SSD Leven JS500120C, high Sierra installed
250GB seagate ST3250310AS
250GB WDC WD2500JS-08NCB1


File:

https://drive.google.com/file/d/1_k3_jxvzGaLfDzin0zSAUT5ml16Hq15c/view?usp=sharing

 

 

 

DSDT.aml.zip

Share this post


Link to post
Share on other sites
3 hours ago, bocajoe said:

 

Hi Maldon, great guide! I got my old Dell 780 (LGA775) running High Sierra 10.13.4 nicely, thank you!

 

I have no audio and I see where you mention "Device HDEF + AppleALC + Lilu". I have AppleALC + Lilu in my KEXT folder but not sure what "Device HDEF" is. 


Also when it goes to sleep it takes like 2 minutes to wake. I have a Q9400 quad core + Nvidia Quadro FX580 but don't have a DSDT for it. Can you help me with a DSDT?

 

Here are my RunMe Results

https://drive.google.com/file/d/1Duv3XYyW4UhziDVVWdquwxYcGQ-D5tvm/view?usp=sharing

 

SPECS: Dell 780 MT, Q9400 2.66GHz Core2Quad Core, Nvidia Quadro FX580 

CLOVER.zip

Share this post


Link to post
Share on other sites
31 minutes ago, MaLd0n said:

 

Thanks for the Clover Maldon. Sleep still not working... display goes to sleep but computer doesn't go to sleep... power button is solid and the fans are still on.

Share this post


Link to post
Share on other sites
8 minutes ago, bocajoe said:

 

Thanks for the Clover Maldon. Sleep still not working... display goes to sleep but computer doesn't go to sleep... power button is solid and the fans are still on.

run app again, send me new files

RunMe.app.zip

Share this post


Link to post
Share on other sites
13 minutes ago, bocajoe said:

the command return?

log show --style syslog | fgrep "Wake reason"

what audio codec?

back old intel Lan kext

Share this post


Link to post
Share on other sites
1 minute ago, MaLd0n said:

the command return?


log show --style syslog | fgrep "Wake reason"

what audio codec?

back old intel Lan kext

ADI 1984A High Definition Audio Codec on my Dell 780.

OK I will put back old lan kext

Share this post


Link to post
Share on other sites
11 minutes ago, bocajoe said:

Oh Sorry. Here is the wake reason:

Macs-iMac:~ mac$ log show --style syslog | fgrep "Wake reason"

2018-04-17 15:09:34.369357-0400  localhost kernel[0]: (AppleACPIPlatform) Wake reason: USB0

2018-04-17 15:09:34.369358-0400  localhost kernel[0]: (AppleACPIPlatform) Wake reason: USB0

2018-04-17 15:11:29.506753-0400  localhost kernel[0]: (AppleACPIPlatform) Wake reason: USB0

2018-04-17 15:11:29.506755-0400  localhost kernel[0]: (AppleACPIPlatform) Wake reason: USB0

2018-04-17 16:10:00.311659-0400  localhost kernel[0]: (AppleACPIPlatform) Wake reason: USB0

2018-04-17 16:10:00.311674-0400  localhost kernel[0]: (AppleACPIPlatform) Wake reason: USB0

2018-04-19 11:23:32.028355-0400  localhost kernel[0]: (AppleACPIPlatform) Wake reason: USB0

2018-04-19 11:23:32.028356-0400  localhost kernel[0]: (AppleACPIPlatform) Wake reason: USB0

2018-04-19 14:58:57.360846-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-19 14:58:57.360847-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-19 16:12:18.472864-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-19 16:12:18.472865-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-19 18:00:53.210702-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-19 18:00:53.210703-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-19 19:20:50.096705-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-19 19:20:50.096706-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-19 20:21:37.992600-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-19 20:21:37.992602-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-19 23:49:46.175981-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-19 23:49:46.175983-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-23 19:30:03.322370-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-23 19:30:03.322371-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-23 19:50:04.167217-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

2018-04-23 19:50:04.167218-0400  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: USB0

Macs-iMac:~ mac$

Share this post


Link to post
Share on other sites
15 minutes ago, bocajoe said:

ADI 1984A High Definition Audio Codec on my Dell 780.

OK I will put back old lan kext

DSDT.aml.zip

check if audio work

ur codec work with 11 or 13 only

Share this post


Link to post
Share on other sites
10 minutes ago, MaLd0n said:

DSDT.aml.zip

check if audio work

ur codec work with 11 or 13 only

 

I tired the new DSDT and 11 & 13 in clover configurator and still no audio.

Testing sleep now.

Share this post


Link to post
Share on other sites
14 hours ago, MaLd0n said:

 

Thanks MaLd0n, but is the file put at the path /EFI/Clover/ACPI/patched ?

I have put the aml in the above path but can't solve the boot problem.

Share this post


Link to post
Share on other sites
11 hours ago, bocajoe said:

Unfortunately it still doesn't sleep. Monitor does but not computer

i'll check it, back to home in a few hours

9 minutes ago, winipcfg said:

 

Thanks MaLd0n, but is the file put at the path /EFI/Clover/ACPI/patched ?

I have put the aml in the above path but can't solve the boot problem.

what boot problem u have?

Share this post


Link to post
Share on other sites
1 hour ago, MaLd0n said:

what boot problem u have?

 

The problem I got is the system will stuck between the 2nd stage boot logo and login screen on first boot,
I need to soft restart the PC in order to get pass the stuck,  whatever at clover or at bios.
The system also can't shutdown occasionally if it's been on for a while. I believe they are the same problem.

p.s. 'cpus=1 boot flag can solve it, but as you know the performance will be slow as hell. 

screen.jpg.1c39b8a2f81c5a5425296d5cf844a852.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Mieze
      This project is dedicated to the memory of Mausi, the cat I loved more than anybody else.
       

       
      A few days before Christmas I started my latest project, a new driver for recent Intel onboard LAN controllers. My intention was not to replace hnak's AppleIntelE1000e.kext completely but to deliver best performance and stability on recent hardware. That's why I dropped support for a number of older NICs. Currently the driver supports:
       
      5 Series
      82578LM 82578LC 82578DM 82578DC 6 and 7 Series
      82579LM 82579V 8 and 9 Series
      I217LM I217V I218LM I218V I218LM2 I218V2 I218LM3 100 Series (since V2.1.0d0)
      I219LM I219V 200 Series (since V2.3.0d0)
      I219LM I219V 300 Series (since V2.4.0d0)
      I219LM I219V  
      Key Features of the Driver
      Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). Support for TCP/IPv6 and UDP/IPv6 checksum offload. Makes use of the chip's TCP Segmentation Offload (TSO) feature with IPv4 and IPv6 in order to reduce CPU load while sending large amounts of data (disabled due to hardware bugs). Fully optimized for Sierra (64bit architecture) but should work with older 64bit versions of macOS too, provided you build from source with the appropriate SDK for the target OS. Support for Energy Efficient Ethernet (EEE). VLAN support is implemented but untested as I have no need for it. The driver is published under GPLv2.  
      Current Status
      The driver has been tested successfully with I217V, I218V and 82579V under 10.9.5 and above. The attached archive includes source code as well as a prebuilt binary (debug version) for Mavericks and newer versions of macOS.   Known Issues
      There seem to be problems while using VMware with version 1.x.x of the driver. In case you are affected use version 2.0.0 or newer.  
      FAQ
      Could you add support of for...? Well, you are probably asking me to add support for one of the older NICs like the 82571/2/3/4L or 82583 and the answer will be no as I dropped support for these chips intentionally. They are broken and I lost more than 2 weeks trying to make it work on the 82574L without success. I was asked to add support for I210, I211 and I350 but as these chips have a completely different architecture, which isn't supported by the underlying Linux driver, this is impossible, sorry. Does it work with Snow Leopard or 32 bit kernels? No and I have no plans to make a version for 32 bit kernels or anything older than Lion. WoL from S5 doesn't work with this driver but under Windows it's working. Is this a driver bug? No it isn't, the driver is working as it should because OS X doesn't support WoL from S5.  
      Installation
      Goto /S/L/E and delete AppleIntelE1000e.kext. Recreate the kernel cache. Open System Preferences and delete the corresponding network interface, e. g. en0. Reboot. Install the new driver and recreate the kernel cache. I recommend to use Kext Wizard or a similar utility for the installation. Reboot Open System Preferences again, select Network and check if the new network interface has been created automatically or create it manually now. Configure the interface.  
      Help - I'm getting kernel panics!
      Well, before you start complaining about bugs after you upgraded macOS and ask me to publish a driver update, you should first try to resolve the issue on your own by cleaning the system caches.
      As the driver uses macOS's private network driver interface, which is supposed to be used by Apple provided drivers only, you might run into problems after an OS update because the linker may fail to recognize that IONetworking.kext has been updated and that the driver needs to be linked against the new version (Apple provided drivers avoid this problem because they are always updated together with IONetworking.kext). As a result, the linking process produces garbage and the driver may call arbitrary code when trying to call functions from IONetworking.kext. This usually results in unpredicted behavior or a kernel panic. In order to recover from such a situation, you should clean the System Caches forcing the linker to recreate it's caches:
      Delete all the files in /System/Library/Caches and it's subdirectories but leave the directories and the symbolic links intact. This is very important! Reboot. Recreate the kernel cache. Reboot again.  
      Troubleshooting
      Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be retrieved with "grep kernel /var/log/system.log" in Terminal. Starting from Sierra use "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Don't copy and paste large amounts of log data to your post. Create an archive with the log data and attach it to your post. In case you don't want to make your log data publicly accessible, contact me via PM and I will provide you a mail address to send it directly to me.  Check your BIOS settings. You might want to disable Network Boot and the UEFI Network Stack as these can interfere with the driver. Double check that you have removed any AppleIntelE1000e.kext from your system because it could prevent the driver from working properly. Delete the following files: /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist /Library/Preferences/SystemConfiguration/preferences.plist Verify your bootloader configuration, in particular the kernel flags. Avoid using npci=0x2000 or npci=0x3000.  In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard, different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable. Changelog
      Version 2.4.0 (2018-04-14) Added support for 300 series versions of I219LM and I219V. Updated underlying Linux source code. Version 2.3.0 (2017-06-20) Added support for 200 series versions of I219LM and I219V. Version 2.2.0 (2016-09-23) Disabled TSO to work around a hardware bug. Version 2.1.0 (2016-05-24) Added support for I219LM and I219V Version 2.0.0 (2015-04-22) First official release which is identical to 2.0.0d2 (only the version number has been changed). Version 2.0.0d2 (2015-04-04) Changed the tx descriptor write back policy for 82579, I217 and I218 to prevent random tx deadlocks. Version 2.0.0d1 (2015-03-14) Uses Apple's private driver interface introduced with 10.8. Supports packet scheduling with QFQ Solves the VMware issue. Version 1.0.0d6 (2015-03-04) Reworked TSO6 support to avoid problems with VMware. Wake-on-LAN now working. Version 1.0.0d5 (2015-02-27) Reworked TSO4 support to eliminate the bug of 1.0.0d4. Added some debug code in order to collect information about the VMware related issue. Version 1.0.0d4 (2015-02-25) Set total length field of the IP-header to zero for TSO4 operations. Report EEE activation state in kernel log message when the link has been established. Version 1.0.0d3 (2015-02-11) Reworked media selection and EEE support (EEE is now activated when both link partners support it. It can be disabled selecting the medium manually). Duplex setting for 10/100 MBit connections is now reported correctly. The number of tx descriptors has been reduced from 2048 to 1024. The code has been cleaned up and obsolete files have been removed. Version 1.0.0d2 (2015-01-31) First development release. Getting the Driver
      The source code can be found on GitHub: https://github.com/Mieze/IntelMausiEthernet There is also a prebuilt binary for 10.11 and above in the download section: http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/ Build from Source for 10.8
      Register as a developer on Apple's developer website. A free membership is sufficient. Download a copy of Xcode 5.1.1 and install it on your machine. In the project select 10.8 as the "Base SDK" and the "Deployment Target". Call "Archive" from the menu "Product" and save the built driver. Credits
      Thanks to RehabMan and Yung Raj for running tests and pointing me in the right direction while I was trying to fix TSO. Special thanks to Yung Raj for motivating me when I was about to give up.
    • By Gorec
      Hi.
      I apologize in advance if I didn't post in the right category and if my title and description aren't specific enough :c
       
      My config in a nutshell:
      CPU: i7 5820k GPU: MSI GTX 1060 3GB RAM: 16 GB MOBO: MSI X99 SLI PLUS I attached RunMe output with all the details of my built.
       
      Some background:
      I have my Hackintosh for about half a year. That time I managed to make it works and fix major issues, but some of them left unresolved since then and I ignored them until now.
      I use my Hackintosh for Adobe projects (PR, AE, PS, IL, AU and a lot more) - most of them connected with video editing of course browsing with Chrome and other small tasks.
       
      Problems:
      Random restarts - this is the biggest one. I'm starting to work on bigger and bigger projects and at this time I think I can't allow this to happen that often. In the past, they happened like once a day or a couple of times a week. However, now it's just frustrating when it happens even 5 or more times a day. I've tried to observe and find out what can be the cause but I haven't managed to find any connections. I thought it happens when Premiere or another app is using GPU, but I haven't seen increased usage when it restarts. I think that it can be connected with GPU, memory or PSU or... meh, anything else. I don't have resources to check if it'll work with other components. There should be some fix for this. I will really appreciate any help with this :c Restart instead of shutdown & sleep doesn't work. I've tried to look through some Google results for this and tried many solutions (as you can see in attached Clover folder), but I think the right one for many of these issues is to make my own DSDT. Glitches, freezes and other things while encoding a video. It happens very often when I try to do this. Maybe it is an issue with GPU or (hopefully) only with GPU drivers which can be fixed with some patch. Today my headphones stopped working. I have a multi-output device configured in the Audio MIDI Setup app which includes my headphones (HyperX Cloud via USB) and Soundflowerbed virtual audio device for capturing system audio. Today while I was trying (like 15 times) to encode a video in Media Encoder in the background and watch video on YouTube I stopped hearing anything from my system. Of course, it restarted a couple of times as always, but even this didn't solve this. If I plug them directly with mini jack (not via USB Soundcard which was in the box and which I always used) in the front IO or the back I only hear some loud noise It takes EX-Fat formatted volumes a few minutes to mount after each restart. I found a workaround to format it with NTFS since I have Tuxera installed and I will reformat these volumes when I will find time for this, but maybe there is some fix for this. GPU is a little bit hot. HW Monitor shows it is only 45-55 degrees, but for my hand is a little bit hot, idk. Also related to GPU - glitch after POST but before entering Clover boot menu. It is a black screen with little white squared glitches for a few seconds. Maybe it indicates the GPU drivers are loading, but maybe it shouldn't be like this. And if I can ask about that - I can't make all applications hide on startup. I, obviously, have "Hide" checkbox checked on every login item in settings, but it doesn't work, none of the apps is hidden in the dock. Is there a way to fix this? Also a small but annoying problem - I can't turn off permanently Mojave update notification (since I tried to install it, and I had to reverse to High Sierra because I had a black screen and I didn't have time for repairing all of them. Tags are not working in Finder - every time I tag a file or folder and make a change in it (for example save a text file) the tag disappears.  
      So, with knowing all of that, is there a way to make a proper DSDT file for my Hackintosh? I tried to look through some guides on how to make it but I think I reached my abilities to understand how Mac OS works and what all of these things are, so I'm asking you guys politely, would someone like to help me? At least with these random restarts? :/
      I really begin to think that I'm a newbie in configuring all of that Clover things - even after what I managed to do with my PC. Help me, pleease... :c
       
      If you have any questions post it below, I will really appreciate any help <3
      Send me MBP-Gorec.home.zip
    • By End3rPower50
      Hi, i've installed on my pc MacOS Mojave but after installation my pc, sometimes, crash giving kernel panic.
      I came to the conclusion that it is a random kernel panic because sometimes it starting up and other times it isn't starting up
       
      My PC:
      CPU: Intel i7 6500U
      LAN: RTL8100
      Wi-Fi & Bluetooth: Dell DW1820A
      USB 3.1
       
      CLOVER.zip
    • By fantomas1
      Hi InsanelyMacaholics   

      Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS Sierra.
       
      10.12.6
      Nvidia Web Driver - 378.05.05.25f15 --> build 16G1918 (thanks to BreBo) New!
      Nvidia Web Driver - 378.05.05.25f14 --> build 16G1917 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f13 --> build 16G1815 (thanks to flowrider)
      Nvidia Web Driver - 378.05.05.25f12 --> build 16G1710 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f11 --> build 16G1618 (thanks to Frank Nitty)
      Nvidia Web Driver - 378.05.05.25f10 --> build 16G1510 (thanks to BreBo) 
      Nvidia Web Driver - 378.05.05.25f09 --> build 16G1408 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f08 --> build 16G1314 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f07 --> build 16G1314 (thanks to haring)
      Nvidia Web Driver - 378.05.05.25f06 --> build 16G1212 (thanks to WeBeRiO)
      Nvidia Web Driver - 378.05.05.25f04 --> build 16G1114 (thanks to lukazm)
      Nvidia Web Driver - 378.05.05.25f03 --> build 16G1036 (thanks to Gradou)
      Nvidia Web Driver - 378.05.05.25f01 --> build 16G29 (thanks to Badruzeus)
       
       
      10.12.5
      Nvidia Web Driver - 378.05.05.15f01 --> build 16F73 (see this post)
       
       
      10.12.4
      Nvidia Web Driver - 378.05.05.05f02 --> build 16E195(thanks to crachmaster4999)
      Nvidia Web Driver - 378.05.05.05f01 --> build 16E195 (thanks to Moviemakergr)  Pascal support!!!
      Nvidia Web Driver - 367.15.10.45f01 --> build 16E195 (thanks to Lanc)
       
       
      10.12.3

      Nvidia Web Driver - 367.15.10.35f01 --> build 16D32 (thanks to shatterhenner)
       
       
      10.12.2
      Nvidia Web Driver - 367.15.10.25f02 --> build 16C68 (see this post)
      Nvidia Web Driver - 367.15.10.25f01 --> build 16C67 (see this post)
      Nvidia Web Driver - 367.15.10.25b06 --> build 16C60b/16C63a (see this post)
       
       
      10.12.1
      Nvidia Web Driver - 367.15.10.15f03 --> build 16B2657/16B2659 (thanks to Moviemakergr).
      Nvidia Web Driver - 367.15.10.15f01 --> build 16B2555 (thanks to Moviemakergr)
       
       
      10.12.0
      Nvidia Web Driver - 367.15.10.05f01 --> build 16A323 (thanks to phi777)
       
       
      GM
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A323 (same driver since DP4/PB3)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A322 (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A320 (see this post)
       
       
      DP/PB
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A313a (DP8 & PB7) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A304a (DP7 & PB6) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A294a (DP6 & PB5) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A286a (DP5 & PB4) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A270f (DP4 & PB3) (thanks to TheRacerMaster)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A254g (DP3 & PB2) (see this post)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A238m (PB1) (thanks to Faun) 
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A239j (DP2) (thanks to Faun)
      Nvidia Web Driver - 367.05.10.05b03 --> build 16A201w (DP1) (thanks to Xmedik)
       
    • By mossy
      Hi i have old laptop and i wanted to install os x i looked online for some TUT's but i didnt understand some people say works some say no 
       
      i being trying all day boots me to install menu for sierra but i cant move the mouse or the keyboard so can some plz help me 
       
      ASUS K50IN Intel® Core™2 Duo Processor T6500 2.10 GHz
       
      NVIDIA® GeForce® G102M, with 512MB VRAM
       
       
×