Jump to content
MaLd0n

[GUIDE] EL Capitan / Sierra / High Sierra / Mojave on Intel LGA 775 motherboards / DSDT

833 posts in this topic

Recommended Posts

Good!

Put 9800GT and go go go! :D

First: Good News it's there! I have Graphics Acceleration*!   Bad news: I had to switch out my cpu to a Core2 Duo 3.17Ghz. This is exactly the problem I was having with 10.7.5 when I switched to the Xeon Quad core. Any ideas? I have a legit 775 socket Xeon E8200 2.33 Ghz quad core that I can try to see if it is a Quad core thing or a Nvidia thing.

 

 

 

*Maybe not all of the acceleration, however. How do you tell if you have acceleration in 10.11.5?

 

 

 

ETA: I first tried the cpu with the 9800GT but after it booted I just stuck my GTX260 back in.

Share this post


Link to post
Share on other sites
Advertisement

Hi, thanks for quick reply, I think I've forgotten to click attach this file :D 

 

Sorry for my clumsy fingers :)

 

Reattaching my zip now :) 

 

attachicon.gifpiromanneo's hack.zip

 

 

test it

Replace and reboot

CLOVER.zip

 

if works, remove nullcpupm kext, try without it after first reboot ;)

First: Good News it's there! I have Graphics Acceleration*!   Bad news: I had to switch out my cpu to a Core2 Duo 3.17Ghz. This is exactly the problem I was having with 10.7.5 when I switched to the Xeon Quad core. Any ideas? I have a legit 775 socket Xeon E8200 2.33 Ghz quad core that I can try to see if it is a Quad core thing or a Nvidia thing.

 

 

 

*Maybe not all of the acceleration, however. How do you tell if you have acceleration in 10.11.5?

 

 

 

ETA: I first tried the cpu with the 9800GT but after it booted I just stuck my GTX260 back in.

u try a npci=0x2000 with gt9800

Share this post


Link to post
Share on other sites

Let me know!

Good Luck!

Hi, your folder does not work (same problem as before, graphic is not initialized, only black screen (there is signal on monitor) when login screen should displayed)

NullCPUPM does not seem to affect boot progress(tried with and w/o), in verbose mode no any special errors, only VoodooHDA takes long time to find ports, and some 20-30 sec wait on this line:"busy timeout[0], (60s), kextd wait(0): "AppleACPICPU " 

Share this post


Link to post
Share on other sites

this a Clover error

Inject Kexts error

use other version

Ok, updated, clover system boots fast, graphic looks ok, but no USB port works... Tried repluging, no effect...

Share this post


Link to post
Share on other sites

Try Clover patches, replace two files

attachicon.gif01.zip

Does not work.. But there is progress, apart from last try now mouse is getting power (power light works) but does not work,  usb flash drive don't work no power (light don't light up) tried all ports front and rear. BTW BIOS settings are (BIOS EHCI HAND-OFF ENABLED, Legacy support ENABLED, USB 2.0 enabled and HIGH SPEED mode selected.)

Share this post


Link to post
Share on other sites

put bios in default, changed only sata to AHCI if have option ;)

Changed to default, had to re-enable execute disable bit on CPU to able to boot, still same usb problems they don't work.

Share this post


Link to post
Share on other sites

To my surprise the Xeon quad core 2.33 Ghz for the 775 socket boots to El capitan! Here's an IOreg.

Full edited DSDT

 

try remove NullCPUPowerManagement and use Generate P and C States in config.plist

Share this post


Link to post
Share on other sites

Full edited DSDT

 

try remove NullCPUPowerManagement and use Generate P and C States in config.plist

Do you mean take out NullCPUPowerManagement.kext from S/L/E? Or is there another way to disable it with Clover?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By NoEnd
      Hi team,
       
      I have tried to update to security update 2019-001 multiple time with no luck, today I've booted the update with -verbose and attached videos shows the details.
       
      Appreciate your help
       
      Thanks
      Untitled.mov
    • By JhonneR
      Good morning, everyone, I'm sorry if I was wrong in choosing the topic but I need help.
      I have found it extremely difficult to mount a Hackintosh in my acer.
      Setup;
      I5 2430m 2.4 6GB RAM
      Mobo P5we0 - Intel intel Graphics 3000
      At the moment I have not found out what my audio codecs are.
      but I'll leave the link on the motherboard.
      however, my real problem is several.
      I have already used the itakos image, I have already used several images that could be installed normally and that after installing the image I do not have internet via cable or wireless.
      And another, I already looked in other forums and I know that I will be called a donkey in the logical question but I have not been able to install the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] or clover to start from the Hard Disk, so I do not know what to do.At the moment I still do not know if there has already been someone who has already installed the High Sierra or just the Sierra in this notebook model and obtained permanent success.
      If anyone can help me, I'll be grateful.
      Installations without success, but with the system already installed in ACER;
      SIERRA
      HIGH SIERRA
      MOJAVE
      All with the same symptom. Starting only by the bootable USB stick and without internet connection via cable and wireless.
      Appreciate ! Acer 5750 Official Page
    • By PixelLover
      I'm in the middle of my first hackintosh (High Sierra) on my ZenBook Pro UX501VW-US71 laptop using the Vanilla Install. I've tried using different config.plst files and I've gotten the furthest with RehabMan's own (linked here). It hangs at error message IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0.   Can anyone help me figure out what changes to make to the config.plst file for my specific laptop (which is where I assume the problem lies)   System Specs: Intel Skylake Core i7­-6700HQ 2.6 GHz Quad­core
      Intel® HD Graphics 530 Nvidia GTX 960M 2G 15.6" Touch IPS 4K Ultra­-HD display, 3840 x 2160 resolution   Kexts: AppleALC.kext FakeSMC.kext Lilu.kext USBInjectAll.kext WhateverGreen.kext  
    • By fantomas1
      Hi InsanelyMacaholics   

      Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS Sierra.
       
      10.12.6
      Nvidia Web Driver - 378.05.05.25f13 --> build 16G1815 (thanks to flowrider) New!
      Nvidia Web Driver - 378.05.05.25f12 --> build 16G1710 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f11 --> build 16G1618 (thanks to Frank Nitty)
      Nvidia Web Driver - 378.05.05.25f10 --> build 16G1510 (thanks to BreBo) 
      Nvidia Web Driver - 378.05.05.25f09 --> build 16G1408 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f08 --> build 16G1314 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f07 --> build 16G1314 (thanks to haring)
      Nvidia Web Driver - 378.05.05.25f06 --> build 16G1212 (thanks to WeBeRiO)
      Nvidia Web Driver - 378.05.05.25f04 --> build 16G1114 (thanks to lukazm)
      Nvidia Web Driver - 378.05.05.25f03 --> build 16G1036 (thanks to Gradou)
      Nvidia Web Driver - 378.05.05.25f01 --> build 16G29 (thanks to Badruzeus)
       
       
      10.12.5
      Nvidia Web Driver - 378.05.05.15f01 --> build 16F73 (see this post)
       
       
      10.12.4
      Nvidia Web Driver - 378.05.05.05f02 --> build 16E195(thanks to crachmaster4999)
      Nvidia Web Driver - 378.05.05.05f01 --> build 16E195 (thanks to Moviemakergr)  Pascal support!!!
      Nvidia Web Driver - 367.15.10.45f01 --> build 16E195 (thanks to Lanc)
       
       
      10.12.3

      Nvidia Web Driver - 367.15.10.35f01 --> build 16D32 (thanks to shatterhenner)
       
       
      10.12.2
      Nvidia Web Driver - 367.15.10.25f02 --> build 16C68 (see this post)
      Nvidia Web Driver - 367.15.10.25f01 --> build 16C67 (see this post)
      Nvidia Web Driver - 367.15.10.25b06 --> build 16C60b/16C63a (see this post)
       
       
      10.12.1
      Nvidia Web Driver - 367.15.10.15f03 --> build 16B2657/16B2659 (thanks to Moviemakergr).
      Nvidia Web Driver - 367.15.10.15f01 --> build 16B2555 (thanks to Moviemakergr)
       
       
      10.12.0
      Nvidia Web Driver - 367.15.10.05f01 --> build 16A323 (thanks to phi777)
       
       
      GM
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A323 (same driver since DP4/PB3)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A322 (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A320 (see this post)
       
       
      DP/PB
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A313a (DP8 & PB7) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A304a (DP7 & PB6) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A294a (DP6 & PB5) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A286a (DP5 & PB4) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A270f (DP4 & PB3) (thanks to TheRacerMaster)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A254g (DP3 & PB2) (see this post)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A238m (PB1) (thanks to Faun) 
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A239j (DP2) (thanks to Faun)
      Nvidia Web Driver - 367.05.10.05b03 --> build 16A201w (DP1) (thanks to Xmedik)
       
    • By bbritton
      Hi
       
      I am trying to create a clean DSDT for my new hackintosh.  It is all working very well and I hope this will make things even better.
      I have a Gigabyte Z390 AORUS MASTER,
      I9-9900K
      32 gb Ram
      gigabyte vega 64 OC
       
      I extracted the DSDT and SSDT files using F4 in Clover.  I have supplied the resulting DSDT below.  THese are the four errors I get when trying to compile in MACIasl.  ALso I am using ACPI 5.1 in maciasl.
       
      12891, 6126, syntax error, unexpected PARSEOP_NAMESEG, expecting '('
      12900, 6126, syntax error, unexpected PARSEOP_CASE
      12904, 6126, syntax error, unexpected PARSEOP_NAMESEG, expecting '('
      12913, 6126, syntax error, unexpected PARSEOP_CASE, expecting $end and premature End-Of-File
       
      I am newbie to hackintosh so am learning as much as I can as i go.  I am not a programmer so the syntax errors I am not sure what to do with yet.  Any assistance would be appreciated.
       
      Thanks
       
      DSDT.dsl
      DSDT.aml
×