Jump to content
MaLd0n

[GUIDE] EL Capitan / Sierra / High Sierra / Mojave / Catalina on Intel LGA 775 motherboards / DSDT

864 posts in this topic

Recommended Posts

Now have a Olarila app, just download app and clover folder for your Chipset!
 

Install MacOS with Olarila Image, Step by Step, Install and Post Install

 

https://olarila.com/forum/viewtopic.php?f=50&t=8685

 
First...
If you need DSDT edits...
-Extract tables with F4 key in Clover boot screen!
-Run it and send me files!
bone.png
 
Installation
--Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave
 
 
--Install Clover in USB stick
 
--Replace with my Clover folder
 
 
--Install EL Capitan / Sierra / High Sierra and boot into system!beachball.gif
 
 
Post Installation
 
--Install Clover and replace with my folder
 
 
 
--Reboot and activate video!
 
Bingo!
yoji.gif
Now you need a fine tune! DSDT Time!
idea.gif
 
My DSDT GA P35-DS3
 
 
 
Patches
-FIX ERRORS AND WARNINGS
-HPET
-SATA
-SLPB
-DARWIN
-LPC
-HDEF
-RTC
-EHCI
-UHCI
-IRQs
-SBUS
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-LAN
-EC
-PNLF

--Native Power Management

 

Use Clover, check Generate P and C States

 

--Brightness

Install .app, select the required permission and reboot. Work in F1 / F2 keys!

NativeDisplayBrightness.app.zip

MaLd0n 2018-02-03 às 00.57.24.png

MaLd0n 2018-02-11 às 21.36.47.png

https://github.com/Bensge/NativeDisplayBrightness/releases

*in some cases .app don't work, check patches in config.plist inside Clover folder Post Install

 

--AUDIO

 

Device HDEF + AppleAlc + Lilu

 

--install Lan driver by Mieze

 
-Atheros
 
 
-Intel
 
 
-Realtek
 
 
--Links
 
-FakeSMC
 
 
-Audio
 
 
-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
 
Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!
 
We're all here to have fun and learn from each other!
 
ENJOY!

 

Share this post


Link to post
Share on other sites
Advertisement

I'm having a problem getting full graphics acceleration on El Capitan 10.11.5.

 

My hardware is the same as my sig.

 

Intel DP45SG mobo

 

Intel Xeon X5640 Quad Core (This is a modded 771 to 775 processor).

 

8GB DDR3-1333MHZ  Ram

 

(EVGA) Geforce GT260 (896 MB)

 

I was only ever able to get 10.7.5 running on this machine. Mountain Lion never booted and I gave up trying to upgrade but now I see more people on here have also done the 771 to 775 mod and successfully booted to El Capitan and Sierra so I decided to give it a try. I can boot into EC with nv_disable=1. Without that flag I get a black and white zebra pattern when it finally boots. It looks exactly like the problems I was having with this board when using the same Xeon processor:

 

http://www.insanelymac.com/forum/topic/296158-upgrade-core2-duo-to-xeon-x5460-quadno-graphics/.

 

And (it's been a while) but I believe that I also had to rollback the IOPCIFAMILY and AppleACPIPlatform kext from SL to get the graphics working. The only difference is that my previous Gigabyte mobo GA-P31-3GS upgraded to Mountain Lion without a hitch-no rollbacks.

 

I see people like Husaber have a series 45 mobo and have done the 771 to 775 mod, but have an ATI card and have upgraded successfully so I'm wondering it's an Nvidia issue and an ATI card upgrade might solve the whole issue.

 

Thanks in advance.

 

I hope I did this right but here is my Clover origin file and hopefully my IO reg.

 

 

 

 

CLOVER.zip

Send me Mac Pro.zip

Share this post


Link to post
Share on other sites

OK, I replaced my Clover file with yours in my 10.11.5 EFI partition and then booted it with only -v. Although a different set of script lines from what I have been seeing the result was the same. I took some photos (sorry iphone) as it scrolled through the boot and then what the screen looks like after the boot. I forgot to mention that a few days ago I actually got to a different screen mostly light gray with a black bar through the middle and the mouse pointer showed up (finally) and it appeared to be in hi-res i.e. the maximum screen res. for this monitor..

screen shots.zip

Share this post


Link to post
Share on other sites

Sorry, but I'm new to Clover. Which Clover option do I use to mount HDD EFI partition and then replace the Clover folder when booting from the USB stick?

 

 

**I forgot to mention in my first post, but for 10.7.5, both this mobo and my Gigabyte GA-P31-3GS the graphics would be fine (acceleration,etc.) if I used my E8500 Core 2 Duo 3.16 (SLB9K (E0)). It was only when I used the Xeon Quad core that I had to roll back the kexts. I don't know if this is helps finding the errors or not but I thought I should include it.

 

 

Thanks again for all your help.

Share this post


Link to post
Share on other sites

Still no love.

 

 

Is it the NVDAResman kext that's causing the issue? I notice that if NV_disable=1 is used in -v mode it will say something like NVDAResman kext disabled because nv_disable=1. Screen shot of extensions shows it not loaded but listed. On my 10.7.5 install it is loaded.

screen v.4.zip

11.5 screen shot.nvdisable.zip

Share this post


Link to post
Share on other sites

Yes, Rampage! My P35-DS3 and 945 work great, SSD has given a new life!  :lol:  :P

 

G41M-P26, C2Q, AMD 6870, 60GB SSD. Works so so. Good for casual use. 

Share this post


Link to post
Share on other sites

G41M-P26, C2Q, AMD 6870, 60GB SSD. Works so so. Good for casual use. 

It's true! 

I'm have a lot of hackintosh, but I always remember and use the old ones. GA-945GCM-S2C, core2duo 4500 and gt220 :D

Remember the old times :P

 

G41M-P26 is a ICH7?

Share this post


Link to post
Share on other sites

U have other GPU for test?

Nothing newer than the 260 GTX. I have a 9800GT from my other system. It also had issues when I used the Xeon X5640. Do you think it's an issue with the card? Somebody on the site that I cannot name is running Mavericks on the DP45SG mobo with an ATI card. What would be a nice upgrade from the GTX260 from ATI that would boot OOB?

 

 

 

OMG! Was that Rampage Dev who just brought light into our dark corner of the internet? Funnily enough I thought about posting my problems on his site ... but then I thought .... "nahhhhh, he doesn't care about these old systems!"

Share this post


Link to post
Share on other sites

It's true! 

I'm have a lot of hackintosh, but I always remember and use the old ones. GA-945GCM-S2C, core2duo 4500 and gt220 :D

Remember the old times :P

 

G41M-P26 is a ICH7?

 

 

MaLdOn, it's time for the 771 to 775 mod! Quad core Xeons are cheap ....

Share this post


Link to post
Share on other sites

Hi, first of all I would like to thank you for your guide. And I’m asking for your help

Btw Im not total stranger to hackintoshing (ok I must admit dsdt is dark area for me :D… snow leo was my first success) but time flies techniques change and now I’m here…. having problems with Sierra :D 

 

- App Store download (version 10.12.4) created with terminal command and clover boot loader :D 

 

Second Im posting my zip with all required files for DSDT edits, because vanilla hack is happy hack :) 

 

Third, installation was very slow(used my clover folder), has taken whole night to install, but installed (must be because USB ports are reporting as 1.0 (12mb per second max speed reported in system information). 

 

Forth I'm not able to boot with your post installation clover folder (added in zip) (system takes too long to boot (on ssd) and when login screen would normaly kick in black screen is showed)

 

Im able to boot with my clover folder (added in zip) (Used on my older hack builds and tweaked per random internet guides) but problems are:

 

-Usb is bugy (unmount drive when copying, keyboard and mouse stops working) and slow USB 1.0 (usb flash drives reported as 12mbps in system information),

-Audio not working  didn’t try kexts (on older Mac versions I've used HDA enabler kext and packed AppleHDA.kext installed in S/L/E I think dsdt patch would be better :) )

- restart works (I think shutdown too)

- goes to sleep OK, but wakes up to black screen (loud fans) with flashing line. No response needs restart.

- GPU (detected as AMD Radeon HD 7xxx 2048 MB not sure about HW acc)

-CPU ok

- RAM ok

- disks I think ok

- ethernet ok

- apple wifi ok

 

Will configure serial and UUID and system ID at end (for iMessage etc… not needed for now)

 

 

BTW also just for sake of it, I’m adding my old dsdt file I’ve created-patched long time ago it worked with older OSX versions… if it can help you in some way if you are willing to create new one, or at least help me.

 

I did used that old DSDT on Sierra install first try result: waiting for root device (many usb errors and warnings). So I’ve used my clover folder without dsdt, and it installed with symptoms described above. 

 

 

 

System info:

 

MB: Asus p5w dh deluxe (bios 3002)

DISK: OSX is on ssd 250 gb, some other disks connected (I think they work :D )

CPU: Intel core 2 duo e8400 stock speed

RAM: 6 GB 800mhz ram (2+2GB+1+1GB sticks)

GPU: AMD R9 270X (should work OBB. on my clover folder works (not sure about HW acc) detected as - AMD Radeon HD 7xxx 2048 MB, on your clover folder boots to blank black screen, signal is on monitor)

WIFI BT combo: Apple original card (works OBB) with right smbios (Broadcom BCM94331CD WiFi Bluetooth Card)

Second WIFI on mb (Realtek something can be disabled not supported not needed)

LAN: Marvell 88E8053 Gigabit LAN (works OBB)

Sound chip: ALC882M (don’t work)

 

 

Thank you in advance

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Mieze
      This project is dedicated to the memory of Mausi, the cat I loved more than anybody else.
       

       
      A few days before Christmas I started my latest project, a new driver for recent Intel onboard LAN controllers. My intention was not to replace hnak's AppleIntelE1000e.kext completely but to deliver best performance and stability on recent hardware. That's why I dropped support for a number of older NICs. Currently the driver supports:
       
      5 Series
      82578LM 82578LC 82578DM 82578DC 6 and 7 Series
      82579LM 82579V 8 and 9 Series
      I217LM I217V I218LM I218V I218LM2 I218V2 I218LM3 100 Series (since V2.1.0d0)
      I219LM I219V 200 Series (since V2.3.0d0)
      I219LM I219V 300 Series (since V2.4.0d0)
      I219LM I219V  
      Key Features of the Driver
      Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). Support for TCP/IPv6 and UDP/IPv6 checksum offload. Makes use of the chip's TCP Segmentation Offload (TSO) feature with IPv4 and IPv6 in order to reduce CPU load while sending large amounts of data (disabled due to hardware bugs). Fully optimized for Sierra (64bit architecture) but should work with older 64bit versions of macOS too, provided you build from source with the appropriate SDK for the target OS. Support for Energy Efficient Ethernet (EEE). VLAN support is implemented but untested as I have no need for it. The driver is published under GPLv2.  
      Current Status
      The driver has been tested successfully with I217V, I218V and 82579V under 10.9.5 and above. The attached archive includes source code as well as a prebuilt binary (debug version) for Mavericks and newer versions of macOS.   Known Issues
      There seem to be problems while using VMware with version 1.x.x of the driver. In case you are affected use version 2.0.0 or newer.  
      FAQ
      Could you add support of for...? Well, you are probably asking me to add support for one of the older NICs like the 82571/2/3/4L or 82583 and the answer will be no as I dropped support for these chips intentionally. They are broken and I lost more than 2 weeks trying to make it work on the 82574L without success. I was asked to add support for I210, I211 and I350 but as these chips have a completely different architecture, which isn't supported by the underlying Linux driver, this is impossible, sorry. Does it work with Snow Leopard or 32 bit kernels? No and I have no plans to make a version for 32 bit kernels or anything older than Lion. WoL from S5 doesn't work with this driver but under Windows it's working. Is this a driver bug? No it isn't, the driver is working as it should because OS X doesn't support WoL from S5.  
      Installation
      Goto /S/L/E and delete AppleIntelE1000e.kext. Recreate the kernel cache. Open System Preferences and delete the corresponding network interface, e. g. en0. Reboot. Install the new driver and recreate the kernel cache. I recommend to use Kext Wizard or a similar utility for the installation. Reboot Open System Preferences again, select Network and check if the new network interface has been created automatically or create it manually now. Configure the interface.  
      Help - I'm getting kernel panics!
      Well, before you start complaining about bugs after you upgraded macOS and ask me to publish a driver update, you should first try to resolve the issue on your own by cleaning the system caches.
      As the driver uses macOS's private network driver interface, which is supposed to be used by Apple provided drivers only, you might run into problems after an OS update because the linker may fail to recognize that IONetworking.kext has been updated and that the driver needs to be linked against the new version (Apple provided drivers avoid this problem because they are always updated together with IONetworking.kext). As a result, the linking process produces garbage and the driver may call arbitrary code when trying to call functions from IONetworking.kext. This usually results in unpredicted behavior or a kernel panic. In order to recover from such a situation, you should clean the System Caches forcing the linker to recreate it's caches:
      Delete all the files in /System/Library/Caches and it's subdirectories but leave the directories and the symbolic links intact. This is very important! Reboot. Recreate the kernel cache. Reboot again.  
      Troubleshooting
      Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be retrieved with "grep kernel /var/log/system.log" in Terminal. Starting from Sierra use "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Don't copy and paste large amounts of log data to your post. Create an archive with the log data and attach it to your post. In case you don't want to make your log data publicly accessible, contact me via PM and I will provide you a mail address to send it directly to me.  Check your BIOS settings. You might want to disable Network Boot and the UEFI Network Stack as these can interfere with the driver. Double check that you have removed any AppleIntelE1000e.kext from your system because it could prevent the driver from working properly. Delete the following files: /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist /Library/Preferences/SystemConfiguration/preferences.plist Verify your bootloader configuration, in particular the kernel flags. Avoid using npci=0x2000 or npci=0x3000.  In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard, different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable. Changelog
      Version 2.5.0 (2019-10-15) Reworked interrupt throttling code and added new configuration parameters. Version 2.4.0 (2018-04-14) Added support for 300 series versions of I219LM and I219V. Updated underlying Linux source code. Version 2.3.0 (2017-06-20) Added support for 200 series versions of I219LM and I219V. Version 2.2.0 (2016-09-23) Disabled TSO to work around a hardware bug. Version 2.1.0 (2016-05-24) Added support for I219LM and I219V Version 2.0.0 (2015-04-22) First official release which is identical to 2.0.0d2 (only the version number has been changed). Version 2.0.0d2 (2015-04-04) Changed the tx descriptor write back policy for 82579, I217 and I218 to prevent random tx deadlocks. Version 2.0.0d1 (2015-03-14) Uses Apple's private driver interface introduced with 10.8. Supports packet scheduling with QFQ Solves the VMware issue. Version 1.0.0d6 (2015-03-04) Reworked TSO6 support to avoid problems with VMware. Wake-on-LAN now working. Version 1.0.0d5 (2015-02-27) Reworked TSO4 support to eliminate the bug of 1.0.0d4. Added some debug code in order to collect information about the VMware related issue. Version 1.0.0d4 (2015-02-25) Set total length field of the IP-header to zero for TSO4 operations. Report EEE activation state in kernel log message when the link has been established. Version 1.0.0d3 (2015-02-11) Reworked media selection and EEE support (EEE is now activated when both link partners support it. It can be disabled selecting the medium manually). Duplex setting for 10/100 MBit connections is now reported correctly. The number of tx descriptors has been reduced from 2048 to 1024. The code has been cleaned up and obsolete files have been removed. Version 1.0.0d2 (2015-01-31) First development release. Getting the Driver
      The source code can be found on GitHub: https://github.com/Mieze/IntelMausiEthernet There is also a prebuilt binary for 10.11 and above in the download section: http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/ Build from Source for 10.8
      Register as a developer on Apple's developer website. A free membership is sufficient. Download a copy of Xcode 5.1.1 and install it on your machine. In the project select 10.8 as the "Base SDK" and the "Deployment Target". Call "Archive" from the menu "Product" and save the built driver. Credits
      Thanks to RehabMan and Yung Raj for running tests and pointing me in the right direction while I was trying to fix TSO. Special thanks to Yung Raj for motivating me when I was about to give up.
    • By WeBeRiO
      Hi all! I have a Asus h110s1 with a i5-7400 working.

      Only no wake up from sleep, screen black and reboot.

      Is posible fix this problem? No is model UHD.

      Thank U.-
    • By fantomas
      Hi InsanelyMacaholics   

      Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS Sierra.
       
      10.12.6
      Nvidia Web Driver - 378.05.05.25f19 --> build 16G2136 (thanks to BreBo) New!
      Nvidia Web Driver - 378.05.05.25f18 --> build 16G2028 (thanks to Riley Freeman)
      Nvidia Web Driver - 378.05.05.25f16 --> build 16G2016 (thanks to Cyberdevs)
      Nvidia Web Driver - 378.05.05.25f15 --> build 16G1918 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f14 --> build 16G1917 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f13 --> build 16G1815 (thanks to flowrider)
      Nvidia Web Driver - 378.05.05.25f12 --> build 16G1710 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f11 --> build 16G1618 (thanks to Frank Nitty)
      Nvidia Web Driver - 378.05.05.25f10 --> build 16G1510 (thanks to BreBo) 
      Nvidia Web Driver - 378.05.05.25f09 --> build 16G1408 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f08 --> build 16G1314 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f07 --> build 16G1314 (thanks to haring)
      Nvidia Web Driver - 378.05.05.25f06 --> build 16G1212 (thanks to WeBeRiO)
      Nvidia Web Driver - 378.05.05.25f04 --> build 16G1114 (thanks to lukazm)
      Nvidia Web Driver - 378.05.05.25f03 --> build 16G1036 (thanks to Gradou)
      Nvidia Web Driver - 378.05.05.25f01 --> build 16G29 (thanks to Badruzeus)
       
       
      10.12.5
      Nvidia Web Driver - 378.05.05.15f01 --> build 16F73 (see this post)
       
       
      10.12.4
      Nvidia Web Driver - 378.05.05.05f02 --> build 16E195(thanks to crachmaster4999)
      Nvidia Web Driver - 378.05.05.05f01 --> build 16E195 (thanks to Moviemakergr)  Pascal support!!!
      Nvidia Web Driver - 367.15.10.45f01 --> build 16E195 (thanks to Lanc)
       
       
      10.12.3

      Nvidia Web Driver - 367.15.10.35f01 --> build 16D32 (thanks to shatterhenner)
       
       
      10.12.2
      Nvidia Web Driver - 367.15.10.25f02 --> build 16C68 (see this post)
      Nvidia Web Driver - 367.15.10.25f01 --> build 16C67 (see this post)
      Nvidia Web Driver - 367.15.10.25b06 --> build 16C60b/16C63a (see this post)
       
       
      10.12.1
      Nvidia Web Driver - 367.15.10.15f03 --> build 16B2657/16B2659 (thanks to Moviemakergr).
      Nvidia Web Driver - 367.15.10.15f01 --> build 16B2555 (thanks to Moviemakergr)
       
       
      10.12.0
      Nvidia Web Driver - 367.15.10.05f01 --> build 16A323 (thanks to phi777)
       
       
      GM
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A323 (same driver since DP4/PB3)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A322 (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A320 (see this post)
       
       
      DP/PB
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A313a (DP8 & PB7) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A304a (DP7 & PB6) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A294a (DP6 & PB5) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A286a (DP5 & PB4) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A270f (DP4 & PB3) (thanks to TheRacerMaster)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A254g (DP3 & PB2) (see this post)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A238m (PB1) (thanks to Faun) 
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A239j (DP2) (thanks to Faun)
      Nvidia Web Driver - 367.05.10.05b03 --> build 16A201w (DP1) (thanks to Xmedik)
       
    • By LucasMatheus
      Equipment Information PROCESSADOR: Intel Core i5 5200U de 2.2 até 2.7 GHz; MEMÓRIA RAM: 6 GB; PLACA DE VÍDEO: Intel5500/Geforce 910M 2 GB; DISCO RÍGIDO: 1 TB; TELA: 15.6″ Full HD 1920 x 1080 pixels; CONEXÕES: 1 HDMI, 3x USB, 1 RJ 45 ,1 COMBO audio jack e WiFi; https://www.samsung.com/br/pc/notebook-np300e5k-xf1br/
        I am unable to activate the Intel HD5500.
      Can only start with fakeid: 0X12345678
       
      Here is the attached Clover I am using
      Clover
×