Jump to content
  1. etksoul

    etksoul

  2. HurricaneX

    HurricaneX

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fusion71au
      Clover r4989 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4989 for VMware.zip". Mount Clover-v2.4k-4989-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By Drovosek
      For my laptop Hp Pavilion 15-au028ur worked patch for HP 3165sf
      I also experimented with manual patching and assembled my own version:

      #Maintained by: RehabMan for: Laptop Patches #Battery_HP-DV6-1380ek.txt # created by RehabMan 2019-xx-xx # based on Battery_HP-DV6-1380ek.txt # additional patches for dv6-1380ek provided by chihab222, credit gsly # works for: #  HP Pavilion 15-au028ur, per Drovosek into method label B1B2 remove_entry; into definitionblock code_regex . insert begin Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n end; # 16-bit EC0 registers #                BADC,   16, #                BFCC,   16, #                MCUR,   16, #                MBRM,   16, #                MBCV,   16, into device label EC0 code_regex BADC,\s+16, replace_matched begin ADC0,8,ADC1,8, end; into device label EC0 code_regex BFCC,\s+16, replace_matched begin FCC0,8,FCC1,8, end; into device label EC0 code_regex MCUR,\s+16, replace_matched begin CUR0,8,CUR1,8, end; into device label EC0 code_regex MBRM,\s+16, replace_matched begin BRM0,8,BRM1,8, end; into device label EC0 code_regex MBCV,\s+16, replace_matched begin BCV0,8,BCV1,8, end; # 16-bit method access into method label CLRI code_regex (\^.*)MBRM replaceall_matched begin B1B2\(%1BRM0,%1BRM1\) end; into method label UPBS code_regex (\^.*)MBRM replaceall_matched begin B1B2\(%1BRM0,%1BRM1\) end; into method label UPBI code_regex (\^.*)BFCC replaceall_matched begin B1B2\(%1FCC0,%1FCC1\) end; into method label UPBS code_regex (\^.*)MCUR replaceall_matched begin B1B2\(%1CUR0,%1CUR1\) end; into method label UPBS code_regex (\^.*)MBCV replaceall_matched begin B1B2\(%1BCV0,%1BCV1\) end;
      The only problem - when it reaches 100% charge, it no longer falls until you reset the CMOS (15-30 seconds hold down the power button on the laptop). In the rehabman guide there is a patch for ASUS in this case, there is a patch method FBST. There is no such method in my DSDT.
      Can someone help?
      Here's a patched and clean DSDT: https://vk.com/doc183234383_509697931
    • By JackBauer24
      Hello,
       
      I have installed OSx86 10.11 (El Capitan) on April 2016 on my Asus Z170 Deluxe system.
       
      For installation I used this Thread.
       
      I used it a lot and it worked well. Meanwhile I switched to Linux and I use Win10 time to time. So OSX was forgotten. Also it did not boot correctly anymore.
       
      Now I wanted to start with a fresh installation and use OSX more often again. I want to use OSX 10.13 High Sierra. Is it working on my Asus Z170 Deluxe? I have the same Hardware as of April 2016 only the graphics card was updated to a Nvidia GTX1080.
       
      My Hardware in detail: Asus Z-170-Deluxe (Bios 3801), i7-6700k, EVGA GeForce GTX 1080 SC GAMING ACX 3.0, Samsung 950 Pro/M2 NVME 512MB, HDD 4 TB)
      Can I use some of support files from the old thread for the installation (see attachment)? Can I still use  Clover 2.3k r3292 Special Edition v2 ? Or do I need a newer version?
       
      Has someone installed High Sierra successfully on the Asus Z170 Deluxe ?
       
      About some hints where to start I would be thankful.
       
      regards
      JackBauer24
       
      Z170DeluxeFiles.zip
    • By jamesxxx1997
      Hi everyone~
      Now using mojave 10.14.4 , I am patching my dsdt and ssdt but have four syntax error with my dsdt.dsl , and I don't know how to fix it.
       
      My specs:
      lenovo thinkpad x1 yoga 3rd
      CPU : i7-8550u
      graphics : uhd620
       
      The file of my dsdt and ssdt , ioreg , and my efi is in this link:https://drive.google.com/drive/folders/1T1nv1QgqDtczXrohdlQUJ_8O-kPpoSEf?usp=sharing
       
      thanks!
    • By bcuraboy3
      Good morning everyone. I have a HP Pavillion with the following specs
      I have managed to install MOjave on it, using Rehabman's config for Intel HD5500. 
      But I need some help with a DSDT for it.
      Would anyone be kind enough to have a look at the zip file, which contains the EFI folder, a IOREG, and some screenshots from DPCI Manager,
      and help me with a good DSDT patched and a correct config.plist for it?   
      Thank you very much.  Highly appreciated 
      I have also included a report from Aida64 in case anyone needs it 
       
      15-p200np
       
      Número do equipamento
      L5Z67EA
      Microprocessador
      Intel Core i7-5500U com placa gráfica Intel HD 5500 (2,4 GHz, 4 MB de cache, 2 núcleos);
      Memória
      SDRAM DDR3L de 4 GB a 1600 MHz (1 x 4 GB)
      Placa de vídeo
      NVIDIA GeForce 840M (DDR3 dedicada de 2 GB) >>  disabled already using the config.plist provided 
      Disco rígido
      SATA 1 TB 5400 rpm
      Unidade multimédia
      Gravador de DVD SuperMulti
      Visor
      HD BrightView com retroiluminação WLED de 39,6 cm (15,6 pol.) na diagonal (1366 x 768)
      Placa de rede
      Ethernet LAN Base-T 10/100 integrada
      Conectividade sem fio
      Combo 802.11b/g/n (1x1) e Bluetooth 4.0 (compatível com Miracast) >> It's not supported, but a DW1550 it's on it's way 
      Som
      BeatsAudio com 2 altifalantes >>  it's a ALC 290 
      Teclado
      Tamanho completo tipo ilha com teclado numérico
      Dispositivo
      HP Imagepad com suporte de gestos multi-toque
      Portas externas
      1 leitor de cartões multimédia SD multi-formato
      1 HDMI
      1 combinação auscultadores/microfone
      1 USB 2.0
      2 USB 3.0
      1 RJ-45
      Dimensões
      38,45 x 26,02 x 2,39 cm
      Peso
      2,27 kg
      Alimentação
      Transformador de alimentação CA de 65 W
      Polímero de iões de lítio 4 cél. 41 Wh
      Câmara
      Câmara Web HP TrueVision HD (frontal) com microfone digital de matriz dupla integrado
      Mac-Pro-Noi.zip
      Report.htm
×