Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,372 posts in this topic

Recommended Posts

Posted (edited)
9 hours ago, MaLd0n said:

Check if work

DSDT.aml.zip


Thanks mate :D


The system boots fine, but iGPU does not work. It is listed under PCI devices in System report, but not under graphics. Also I got a kernel panic:

 

Spoiler

*** Panic Report ***
panic(cpu 0 caller 0xffffff8017add16d): Kernel trap at 0xffffff7f9b5644e9, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000003f70, CR3: 0x0000000021579000, CR4: 0x00000000001626e0
RAX: 0x57c828b8739400e9, RBX: 0x0000000000000000, RCX: 0x0100000100000000, RDX: 0x0000000100000000
RSP: 0xffffff81fa453e60, RBP: 0xffffff81fa453e90, RSI: 0xffffff81fa453c8e, RDI: 0xffffff81d97f5000
R8:  0x0000000000000000, R9:  0x0000000000000000, R10: 0xffffff81d97f86d8, R11: 0x0000000000000000
R12: 0x0000000000000003, R13: 0x0000000000000000, R14: 0xffffff803c466000, R15: 0x0000000000000000
RFL: 0x0000000000010202, RIP: 0xffffff7f9b5644e9, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000000000003f70, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 1

Backtrace (CPU 0), Frame : Return Address
0xffffff81fa453930 : 0xffffff80179af82d 
0xffffff81fa453980 : 0xffffff8017aeb795 
0xffffff81fa4539c0 : 0xffffff8017adcf4a 
0xffffff81fa453a30 : 0xffffff801795cae0 
0xffffff81fa453a50 : 0xffffff80179af247 
0xffffff81fa453b70 : 0xffffff80179af093 
0xffffff81fa453be0 : 0xffffff8017add16d 
0xffffff81fa453d50 : 0xffffff801795cae0 
0xffffff81fa453d70 : 0xffffff7f9b5644e9 
0xffffff81fa453e90 : 0xffffff7f9b557098 
0xffffff81fa453ed0 : 0xffffff801805947c 
0xffffff81fa453f30 : 0xffffff8018057562 
0xffffff81fa453f70 : 0xffffff8018056abc 
0xffffff81fa453fa0 : 0xffffff801795c0ce 
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelFramebufferAzul(12.0.8)[4DCEBE7C-8B0F-3F58-A7CF-2827C05F9888]@0xffffff7f9b535000->0xffffff7f9b699fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[54C3F778-4B95-3093-A51D-D761607C96CB]@0xffffff7f98295000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[7706F483-87AE-3F44-BCCA-09C156F4E031]@0xffffff7f98db1000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.8)[2B970BDA-3F88-31F1-9A04-D52B72F2D784]@0xffffff7f989eb000
            dependency: com.apple.iokit.IOReportFamily(47)[86DDD149-2800-3D3E-9914-3556918455F1]@0xffffff7f989e4000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.14)[61BA5741-B8B8-32F6-A4D1-051861B0294D]@0xffffff7f985e7000
            dependency: com.apple.iokit.IOGraphicsFamily(530.60)[9E233908-09E1-332E-AE9B-CB27D514707B]@0xffffff7f9857e000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 debug=0x100 shikigva=60 -v 

Mac OS version:
18E226

 

 

 

EDIT:

 

I changed the platform id to 0d220003 and now the iGPU works :D

 

85103122_Schermafbeelding2019-04-12om09_40_45.png.a32de7a26b9fcfac2ff1138225d5f8e2.png

 

The only issue that's left seems to be that upon reboot from macOS, the system hangs upon Clover initialization. I have to hard reset in order to boot up

 

Send me Ricos-iMac.zip

 

Edited by ricoc90

Share this post


Link to post
Share on other sites
Advertisement

Good morning Sir

 

I have a Toshiba P50t-b-112 with the specs:

Satellite P50t-B-112

Part number: PSPNVE-01G006H2

·        Windows 8.1 (pre-installed) - Toshiba recommends Windows 10 Pro

·        4th generation Intel® Core™ i7-4710HQ processor with Intel® Turbo Boost Technology 2.0

·        39.6cm (15.6”) , Toshiba TruBrite® Ultra HD TFT High Brightness touch display with LED backlighting, 16 : 9 aspect ratio, 282 pixel per inch, colour calibrated by Chroma Tune™, Technicolor colour certified

·        Hard disk crucial ssd

·        Haswell platform

·        Ram:16,384 (8,192 + 8,192) MB, DDR3L RAM (1,600 MHz)

·        AMD Radeon™ R9 M265X Enthusiast Graphics with AMD Enduro™ Technology and Intel hd 4600 integrated.

I installed Mojave 10.14.4 but not Works neither Intel hd4600 nor radeon r9 m265x only 32mb or x8 pcie

I can not get full QE/Ci ir full graphics (only 32mb/x8 pcie) i think with dsdt ssdt i can fix this problem. You can find attached my ioreg and original tables.

Thanks for your effort and you support and thanks for your early reply 

 

Thanks in advance 

 

Dsdt ssdt + ioreg.zip

Share this post


Link to post
Share on other sites
11 hours ago, Ancora1975 said:

Good morning Sir

 

 

 

I have a Toshiba P50t-b-112 with the specs:

 

Satellite P50t-B-112

 

Part number: PSPNVE-01G006H2

 

·        Windows 8.1 (pre-installed) - Toshiba recommends Windows 10 Pro

 

·        4th generation Intel® Core™ i7-4710HQ processor with Intel® Turbo Boost Technology 2.0

 

·        39.6cm (15.6”) , Toshiba TruBrite® Ultra HD TFT High Brightness touch display with LED backlighting, 16 : 9 aspect ratio, 282 pixel per inch, colour calibrated by Chroma Tune™, Technicolor colour certified

 

·        Hard disk crucial ssd

 

·        Haswell platform

 

·        Ram:16,384 (8,192 + 8,192) MB, DDR3L RAM (1,600 MHz)

 

·        AMD Radeon™ R9 M265X Enthusiast Graphics with AMD Enduro™ Technology and Intel hd 4600 integrated.

 

I installed Mojave 10.14.4 but not Works neither Intel hd4600 nor radeon r9 m265x only 32mb or x8 pcie

 

I can not get full QE/Ci ir full graphics (only 32mb/x8 pcie) i think with dsdt ssdt i can fix this problem. You can find attached my ioreg and original tables.

 

Thanks for your effort and you support and thanks for your early reply 

 

 

 

Thanks in advance 

 

 

 

Dsdt ssdt + ioreg.zip

DSDT.aml.zip

is optimus notebook?

Share this post


Link to post
Share on other sites
43 minutes ago, MaLd0n said:

DSDT.aml.zip

is optimus notebook?

Thanks sir. Now i only need to put this file in Efi/Clover/acpi/patched and restart? Or i have to make some changes in config.plist?

I attached my config.list and if you can suggest any idea to make Ati or Intel Hd4600 to get full graphics….i tried with different options (ig platform id with 0x0d220003 and 0a260006 and devices 0x04168086 and with 0x04128086...inject edid, load vios…) but nothing changes….I think that with your DSDT.aml i can´t fix this issue..

 

If i can fix this full graphics issue i supose this Will be an Optimus notebook because is a 4k laptop and faster.

 

Thanks for your early reply.

Share this post


Link to post
Share on other sites
15 hours ago, duyvbsp said:

Hi @MaLd0n

 

I have an Dell optiplex 7010 SFF, can you help me DSDT

 

Here is my runme file

 

Send-me-HoangMaps-MacBook-Air.zip

DSDT.aml.zip

5 hours ago, Ancora1975 said:

Thanks sir. Now i only need to put this file in Efi/Clover/acpi/patched and restart? Or i have to make some changes in config.plist?

I attached my config.list and if you can suggest any idea to make Ati or Intel Hd4600 to get full graphics….i tried with different options (ig platform id with 0x0d220003 and 0a260006 and devices 0x04168086 and with 0x04128086...inject edid, load vios…) but nothing changes….I think that with your DSDT.aml i can´t fix this issue..

 

If i can fix this full graphics issue i supose this Will be an Optimus notebook because is a 4k laptop and faster.

 

Thanks for your early reply.

use hackintool

Share this post


Link to post
Share on other sites
52 minutes ago, MaLd0n said:

DSDT.aml.zip

use hackintool

Sorry but i don't know what to use hackintool? I suposed that with only put dsdt file in patched directory was enought or you mean to do something else? Hackintool to get full graphics?

Share this post


Link to post
Share on other sites
Posted (edited)

Hi,

 

I am trying to install Mojave on a Dell Latitude E5450:

 

CPU: Core i7 – 5600U @ 2.6 GHz
RAM: 16 GB DDR3
HDD: 256 SSD GB
Screen: 14 inch
Resolution: 1920×1080
Video Card: Intel HD5500 with nVidia GeForce 840M
 
Can you please recommend which guide to follow?
 
Edit: I figured out the guide and created the installation USB drive, but I get a kernel panic when trying to boot regardless of the Orarila Mojave image I try. Can someone help me out?
 
Best regards,
Djuby
Edited by djuby

Share this post


Link to post
Share on other sites
8 hours ago, Huberer said:

@MaLd0n

 

Would you be so kind and mod my dsdt (from MoBo Asrock Z87E-ITX, latest official bios v2.50) to use it for Mojave?

 

Thanks in advance

 

Huberer

origin.zip

DSDT.aml.zip

Share this post


Link to post
Share on other sites

@MaLd0n

 

thank you very much for the dsdt. There's still one question I have. When I use the dsdt, do I still have to use the settings under Clover => ACPI, which you use under clover for the post installation.

Like: GFX0 to iGPU, HECI to IMEI, SAT0 to SATA,....

 

These settings must be fixed with DSDT or am I wrong?

 

Thanks in advance

Share this post


Link to post
Share on other sites
4 hours ago, Huberer said:

@MaLd0n

 

thank you very much for the dsdt. There's still one question I have. When I use the dsdt, do I still have to use the settings under Clover => ACPI, which you use under clover for the post installation.

Like: GFX0 to iGPU, HECI to IMEI, SAT0 to SATA,....

 

These settings must be fixed with DSDT or am I wrong?

 

Thanks in advance

yes, u need

patches rename a ssdt oem, some devices like GFX0, HDEF have a some dependencies in SSDTs OEM, the best just avoid boot error, acpi warnings/errors is stay with patches ON

Share this post


Link to post
Share on other sites

Hello from New Zealand @MaLd0n the hackintosh legend.

I've just started a new hack (laptop in sig) and have it going ok on High Sierra, but only in single user mode. Finally I want to get everything going, but for now, getting it out of single user mode would be great! Boot is super slow lol.

Not working is the 1050Ti, trackpad, sound. I think a big issue is the DSDT patch to stop the dedicated video card... I found it somewhere... I'm useless at patching lol.

I've attached run me and maybe you can get this out of single user mode for me!

Let me know if you need more info. 

Send me petes-Mac-Pro-2.fritz.box.zip

Share this post


Link to post
Share on other sites
16 hours ago, surfinchina said:

Hello from New Zealand @MaLd0n the hackintosh legend.

I've just started a new hack (laptop in sig) and have it going ok on High Sierra, but only in single user mode. Finally I want to get everything going, but for now, getting it out of single user mode would be great! Boot is super slow lol.

Not working is the 1050Ti, trackpad, sound. I think a big issue is the DSDT patch to stop the dedicated video card... I found it somewhere... I'm useless at patching lol.

I've attached run me and maybe you can get this out of single user mode for me!

Let me know if you need more info. 

Send me petes-Mac-Pro-2.fritz.box.zip

check if work, replace full EFI, reboot and extract new send_me

EFI.zip

 

if u have problems with screen backlight, disable PNLF patch in acpi tab

Share this post


Link to post
Share on other sites
6 hours ago, MaLd0n said:

check if work, replace full EFI, reboot and extract new send_me

EFI.zip

 

if u have problems with screen backlight, disable PNLF patch in acpi tab

Thanks! It only starts in safe mode now, won't start normally or in single user mode. Battery works :)

I've attached the runme zip

Send me petes-Mac-Pro-2.zip

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By glasgood
      CLOVER DUAL BOOT MOJAVE & WINDOWS 10 GUIDE 
       

       
       
      INCLUDES  MBR / LEGACY BIOS  TO  GPT / EFI CONVERSION
      USING MBR2GPT TOOL
       
       
      PREREQUISITE: Two physical discs ( SSD’s or HDD’s )
       
       
       
       
       
      STEP 1 - Clover dual boot configuration 
       
      Open config.plist with Clover Configurator
       
      Boot
       Legacy = PBR Timeout = True ( will remove the Timeout countdown, from Clover boot menu)  

       
      GUI 
      Scan / Custom
       Entries = True  Tool = True  Legacy = False ( removes extra Windows 10 entries )  
      Hide Volume
      - Preboot ( macOS Preboot )
      - Recovery ( macOS Recovery )
       

       
      So at boot you will have two options: boot macOS Mojave or Windows 10 
       
       
       
       
       
       
       
      ————————————————————
       
       
      STEP 2 - Using a drive without Windows 10 installed
       
      Disconnect system drive that contains your macOS Mojave install from computer ( This is so that Windows does not overwrite existing macOS Mojave boot loader )
       
      Proceed with a Windows 10 UEFI install.  
      After installation reconnect macOS Mojave Drive, the Windows installation should now be detected and usable in Clover. 
      If Windows 10 is not detected or able to boot,  then verify you installed Windows 10 as UEFI and not MBR ---->  ( Read step 2 - For a drive with Windows 10 installed )
       
       
      OR
       
       
       
      STEP 2 - Using a drive with Windows 10 already installed
       
      Verify your Windows install is  GPT / UEFI or MBR / Legacy BIOS.   
      If Windows install is GPT UEFI then Windows 10 install is ready to use at Clover boot menu, you should be able to boot into Windows directly from Clover boot screen. 
       

       
       
      But if  Windows drive is detected at Clover boot screen, but when booting Windows you get a black screen with a cursor on the top left,
      then this is most likely because Windows drive is MBR ( Legacy BIOS ).  You can easily convert MBR to GPT using  Windows MBR2GPT tool ( this saves hours work having to reinstall Windows 10 and setting up all your applications again  ) 
       
      If Windows 10 install is MBR / Legacy BIOS  then simply convert to GPT / UEFI  following instructions below ( read video summary and view video )
       
       
      ** To use Windows 10  MBR2GPT tool  you must have Windows 10 version 1703 ( creators update  ) or later and less than 3 partitions on 
      the Windows 10 drive **
       
      Video summary:
       
      Confirm Windows 10 drive is MBR Legacy BIOS ( in Windows Disk Management ) Reboot into Windows PE ( Advanced Startup ) Convert from MBR Legacy BIOS to GPT UEFI ( using commands below ) mbr2gpt /validate mbr2gpt /convert Restart Verify Windows 10 drive has changed to GPT UEFI ( in Windows Disk Management )  
       
       
       
      After conversion Windows 10 is ready to use at the Clover boot menu 
       
       
       
      STEP 3 - Stop Windows Boot manager from overriding Clover boot manager
       
      How to stop Windows boot manager from overriding your Hackintosh Clover boot manager when using dual booting between macOS and Windows
       
       
       
       
       
       
    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?f=45&t=9172
       
      ---USB---
      https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By AppleBytes
      Hello,
      I'm working on a re-install of OSX on a dell inspiron 9400. I was finally able to get a copy of SL on it. But it still needs MUCH work, as the graphics (NVIDIA Geforce Go 7800) isn't properly recognized -- either by model, or installed VRAM.
      It has 512Mb, but only initializes 256Mb VESA.
      Anyway, as a start, I thought it best to use a valid dsdt.dsl for compilation, and start there. I've managed to remove all the warnings, and errors save 2
      OUTPUT:
      # sudo iasl -ta ./dsdt.dslll Intel ACPI Component Architecture ASL Optimizing Compiler version 20110527-64 [May 27 2011] Copyright (c) 2000 - 2011 Intel Corporation ./dsdt.dslll   3519:                                 Return (0x00) Error    4080 -           Invalid object type for reserved name ^  (found INTEGER, requires Buffer) ./dsdt.dslll   3956:                     Return (Package (0x00) {}) Remark   5072 -         Effective AML package length is zero ^ ASL Input:  ./dsdt.dslll - 4997 lines, 158533 bytes, 1633 keywords Compilation complete. 1 Errors, 0 Warnings, 1 Remarks, 577 Optimizations I'm attaching a copy of the above output, and the dsdt.dsl file in a tarball to this post in hopes someone with the required knowledge can help me fix it.
      FWIW
      SMBIOS I'm using indicates this is a MBP 3,1
      cpu: cd2 (T7400 @2.16Ghz)
      graphics: NVIDIA Geforce Go 7800 ( G70M? )
      ram: 4Gb
      dell inspiron 9400 (Laptop)
       
      Thank you for all your time, and consideration!
       
      --Chris
       
      DSDT-DSL.tar
    • By headkaze
      Framebuffer patching in Mojave
      Binary patching framebuffers using KextsToPatch in Clover is no longer a viable method in Mojave for Skylake and above. Now you need to use Lilu + WhateverGreen.
       
      Not just for Mojave
      This method of framebuffer patching is not only required for Mojave we recommend it for all previous and future releases of macOS.
       
      Coffee Lake Users
      Please note that the new WhateverGreen will not work with fake Kaby Lake platform-id's. You will need to have either macOS 10.14 Beta 4 (18A336e) or macOS High Sierra 10.13.6 (17G2112). The latter is a special build only available to MacBookPro15,1 or MacBookPro15,2 board id's. You can create a macOS High Sierra 10.13.6 (17G2112) installer by running installinstallmacos.py. (Update: vit9696 added back ability to fake Kaby Lake platform-id's)
       
      Lilu + WhateverGreen
      WhateverGreen is going to replace all the other video patching plugins for Lilu (it currently has merged WhateverGreen, IntelGraphicsFixup, NvidiaGraphicsFixup, Shiki and CoreDisplayFixup). Others will likely follow (such as AppleALC, HibernationFixup and IntelGraphicsDVMTFixup). This is aiming to be the all-in-one solution for video.
       
      Preliminary
      1. Remove:
      - FakePCIID_Intel_HD_Graphics
      - IntelGraphicsFixup
      - NvidiaGraphicsFixup
      - CoreDisplayFixup
      - Shiki
      2. Turn off all graphics injections in Clover:
      - config.plist/Graphics/Inject/ATI=NO
      - config.plist/Graphics/Inject/Intel=NO
      - config.plist/Graphics/Inject/NVidia=NO
      - config.plist/Graphics/ig-platform-id=
      - config.plist/Devices/FakeID/IntelGFX=

      3. Disable DSDT Clover fixes:
      - AddHDMI
      - FixDisplay
      - FixIntelGfx
      - AddIMEI
      4. Disable UseIntelHDMI
      5. Remove boot argument: -disablegfxfirmware
      6. Remove any IGPU and HDMI entries from:
      - config.plist/Devices/Arbitrary
      - config.plist/Devices/Properties
      - config.plist/Devices/AddProperties
      7. Remove any IGPU and HDMI related SSDT and DSDT from:
      - CLOVER/ACPI/patched
      8. Renaming GFX0 -> IGPU
      - WhateverGreen will do this automatically (see caveat below)
      - Be aware that WhateverGreen does not rename all instances of GFX0 -> IGPU but should be okay in most cases
      - You may need to include Clover GFX0 -> IGPU rename for other kexts or ACPI patching that require it
       
      Compile Lilu + WhateverGreen
      Download WhateverGreen. Make sure you place the debug version of Lilu into the root of WhateverGreen before you compile. Install Lilu and WhateverGreen kext's into the usual place. Compile WhateverGreen as debug if you want to view debug output.
       
      Having trouble compiling?
      If you're having trouble compiling you can download the official release binaries or download my (unsupported) build_lilu.sh shell script and run it in a folder to download and build Lilu + WhateverGreen using Xcode automatically. I recommend you try the debug versions first (place them into Clover's EFI/Clover/kexts/Other folder).
       
      Get the device path of your IGPU:
      Download and use the gfxutil tool like so:
      $ ./gfxutil -f IGPU DevicePath = PciRoot(0x0)/Pci(0x2,0x0) ig-platform-id
      For the AAPL,ig-platform-id (AAPL,snb-platform-id for Sandy Bridge) entry Clover requires this value to be in Data format so you need to reverse the bytes. So if you want your platform-id to be 0x3EA50009 first reverse the bytes (0900A53E) then use Xcode's plist editor to add the values to Clover's config.plist.

       
      What ig-platform-id should I use for my system?
      You should choose one that is the closest match to your system. I recommend you do some research on this before choosing one. See post #2 for available options. More info can be found here.
       
      You can determine the generation of your CPU by the first digit after the hyphen.
      Examples:
      - Intel(R) Core(TM) i5-2760QM (Gen 2)
      - Intel(R) Core(TM) i7-5257U CPU @ 2.70GHz (Gen 5)
      - Intel(R) Core(TM) m3-6Y30 (Gen 6)
      - Intel(R) Core(TM) i5-8350U (Gen 8)
       
      Spoofing Intel CPU Gen
      If you need to spoof a different Intel CPU generation you can use the lilucpu=N boot flag. The N refers to the following Intel generations:
      4    SandyBridge 5    IvyBridge 6    Haswell 7    Broadwell 8    Skylake 9    KabyLake 10   CoffeeLake To spoof a CPU you will need to set a valid device-id in your GPU entry in Devices/Properties for the appropriate Intel generation.
       
      Eg. Spoofing Skylake (lilucpu=8 boot flag with device-id=0x16190000), Kaby Lake (lilucpu=9 boot flag with device-id=0x12590000).
       
      Here are some recommended frames:
       
      Gen 2: Sandy Bridge (Intel HD Graphics 2000/3000)
      - S/L/E/AppleIntelSNBGraphicsFB.kext
      - Support started with OS X 10.7.x and ended with macOS 10.13.6
      - Metal support is not available
      - device-id: 0x0102 0x0106 0x010A 0x0112 0x0116 0x0122 0x0126
      - AAPL,snb-platform-id (desktop): 0x00030010 (default)
      - AAPL,snb-platform-id (laptop): 0x00010000 (default)
       
      Gen 3: Ivy Bridge (Intel HD Graphics 2500/4000)
      - S/L/E/AppleIntelFramebufferCapri.kext
      - Support started with OS X 10.8.x
      - device-id: 0x0152 0x0156 0x0162 0x0166
      - AAPL,ig-platform-id (desktop): 0x0166000A (default), 0x01620005
      - AAPL,ig-platform-id (laptop): 0x01660003 (default), 0x01660009, 0x01660004
       
      Gen 4: Haswell (Intel HD Graphics 4200-5200)
      - S/L/E/AppleIntelFramebufferAzul.kext
      - Support started with OS X 10.9.x
      - device-id: 0x0D26 0x0A26 0x0A2E 0x0D22 0x0412
      - AAPL,ig-platform-id (desktop): 0x0D220003 (default)
      - AAPL,ig-platform-id (laptop): 0x0A160000 (default), 0x0A260005 (recommended)
       
      Gen 5: Broadwell (Intel HD Graphics 5300-6300)
      - S/L/E/AppleIntelBDWGraphicsFramebuffer.kext
      - Support started with OS X 10.10.2
      - device-id: 0x0BD1 0x0BD2 0x0BD3 0x1606 0x160E 0x1616 0x161E 0x1626 0x1622 0x1612 0x162B
      - AAPL,ig-platform-id (desktop): 0x16220007 (default)
      - AAPL,ig-platform-id (laptop): 0x16260006 (default)
       
      Gen 6: Skylake (Intel HD Graphics 510-580)
      - S/L/E/AppleIntelSKLGraphicsFramebuffer.kext
      - Support started with OS X 10.11.4
      - device-id: 0x1916 0x191E 0x1926 0x1927 0x1912 0x1932 0x1902 0x1917 0x193B 0x191B
      - AAPL,ig-platform-id (desktop): 0x19120000 (default)
      - AAPL,ig-platform-id (laptop): 0x19160000 (default)
       
      Gen 7: Kaby Lake (Intel HD Graphics 610-650)
      - S/L/E/AppleIntelKBLGraphicsFramebuffer.kext
      - Support started with macOS 10.12.6
      - device-id: 0x5912 0x5916 0x591B 0x591C 0x591E 0x5926 0x5927 0x5923 0x87C0
      - AAPL,ig-platform-id (desktop): 0x59160000 (default)
      - AAPL,ig-platform-id (laptop): 0x591B0000 (default)
       
      Gen 8: Coffee Lake (Intel UHD Graphics 630)
      - S/L/E/AppleIntelCFLGraphicsFramebuffer.kext
      - Support started with macOS 10.13.6 (17G2112) / 10.14 beta 4 (18A336e)
      - device-id: 0x3E9B 0x3EA5 0x3EA6 0x3E92 0x3E91 0x3E98
      - AAPL,ig-platform-id (desktop): 0x3EA50000 (default), 0x3E9B0007 (recommended)
      - AAPL,ig-platform-id (laptop): 0x3EA50009 (default)
       
      Framebuffer Patching
      WhateverGreen does most of the work automatically for you and in most cases you do not need any extra Framebuffer Patching. At the minimum though you should choose an ig-platform-id suitable for your system and place it in config.plist/Devices/Properties like this:

      Here are some reasons why you might need extra Framebuffer Patching:
      - Setting DVMT for those who can't set it above 32 MB in BIOS (framebuffer-stolenmem / framebuffer-fbmem)
      - Setting higher VRAM for 4K users who experience graphical glitches (framebuffer-unifiedmem)
      - Disabling eGPU (disable-external-gpu)
      - Enable pixel clock patch for 4K support (enable-hdmi20)
      - Disabling connectors to enable sleep (framebuffer-pipecount / framebuffer-portcount / framebuffer-conX-type=-1)
      - Removing CNConnectorAlwaysConnected flag for eDP laptop screens on < 10.13.6 (framebuffer-con0-flags=0x00000090)
      - Changing connector types to match your systems ports (framebuffer-conX-type)
       
      Framebuffer Patching Types
      We have three different types of patches:
       
      1. Arbitrary (Recommended)
      framebuffer-patch-enable (required to enable below) framebuffer-framebufferid (optional; defaults to current platform-id) (all below are optional) framebuffer-mobile framebuffer-pipecount framebuffer-portcount framebuffer-memorycount framebuffer-stolenmem framebuffer-fbmem framebuffer-unifiedmem framebuffer-cursormem (Haswell only) framebuffer-camellia framebuffer-flags framebuffer-conX-enable (required to enable below) framebuffer-conX-index framebuffer-conX-busid framebuffer-conX-pipe framebuffer-conX-type framebuffer-conX-flags 2. All Data
      framebuffer-conX-enable (required to enable below) framebuffer-conX-alldata 3. Find / Replace
      framebuffer-patchX-enable (required to enable below) framebuffer-patchX-framebufferid (optional; defaults to current platform-id) framebuffer-patchX-find framebuffer-patchX-replace framebuffer-patchX-count (optional; defaults to 1) You should place your patches in config.plist/Devices/Properties in Clover config.plist.
       
      Here are some example patches:
      - 32MB BIOS, 19MB stolen (framebuffer) 9MB fbmem (cursor) 2048MB unifiedmem (vram)

       
      - Pipe / Port Count 3 to 2
      - Connector 1 DP to HDMI
      - Connector 2 Disable

       
      Here is an example of the All Data method:

       
      Here is an example of the Find / Replace method:

       
      Framebuffer Dumps
      There are two ways to dump your framebuffer data (both require WhateverGreen + Lilu debug versions):
       
      1. Using -igfxdump boot flag to dump IGPU framebuffer kext to /AppleIntelFramebuffer_X_Y (root of your boot drive)
       
      There are several ways of reading this dump:
      - Using 010 Editor along with the IntelFramebuffer.bt template
      - Using Hackintool File->Open menu
       
      2. Using -igfxfbdump boot flag to dump native and patched framebuffer table to ioreg at IOService:/IOResources/WhateverGreen
       
      There are several ways of reading this dump:
      - Using dump_platformlist.sh shell script
      - Using Hackintool File->Import->IOReg Dump menu
       
      3. Using Hackintool Framebuffer->macOS 10.14 menu
       
      Debug Output
      To get debug output from Lilu use the -liludbgall liludump=60 boot flags. You will need to compile Lilu and WhateverGreen as debug for both of these flags to work. Log files should be located at /var/log/Lilu_*.
       
      To view debug paste the following into Terminal (weglog.txt will output to your home directory):
      log show --predicate 'process == "kernel" AND (eventMessage CONTAINS "WhateverGreen" OR eventMessage CONTAINS "Lilu")' --style syslog --source --last boot >weglog.txt Getting Help

      To help the users of this forum diagnose issues with your configuration please generate a Lilu debug log and then run gen_debug.sh to generate a folder of debug files you can attach to a forum post requesting help.

      Credits
      - vit9696 and lvs1974 for WhateverGreen (Full Credits) and Lilu (Full Credits)
      - Andrey1970 for his guide on applelife.ru
      - RehabMan for all data patching method, ioreg framebuffer dump and other contributions
       


×