Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,283 posts in this topic

Recommended Posts

Advertisement

Hi MaLdOn,

Since updating both to High Sierra and my graphics card, sleep doesn't work anymore on my system.  I updated my graphics adapter from EVGA GTX 960 to Sapphire Nitro Radeon R9 380X.  Originally, I purchased this graphics adapter with this system but back then, I couldn't get this to work until recently.  Thanks to the release of WhateverGreen.kext, my graphics adapter works perfectly.

I'd liked to get a patched DSDT for my system and the link is listed below for my "Send ME" zip file.

Thank you for your time and support...

http://www7.zippyshare.com/v/x4pZim6N/file.html

Share this post


Link to post
Share on other sites
17 hours ago, YoYelloW said:

I tried this, and it does work, sort of..

it boots but doesn't to go desktop, i can get into the system via screen sharing and got this dump, but i wouldn't call it a working system :P

https://stack.yoyellow.nl/s/Cfw9gZrLqLQ5X08

http://www97.zippyshare.com/v/zSEOc08V/file.html
ur problem is video, need check it

Share this post


Link to post
Share on other sites
8 hours ago, cooldog820 said:

Hi MaLdOn,

Since updating both to High Sierra and my graphics card, sleep doesn't work anymore on my system.  I updated my graphics adapter from EVGA GTX 960 to Sapphire Nitro Radeon R9 380X.  Originally, I purchased this graphics adapter with this system but back then, I couldn't get this to work until recently.  Thanks to the release of WhateverGreen.kext, my graphics adapter works perfectly.

I'd liked to get a patched DSDT for my system and the link is listed below for my "Send ME" zip file.

Thank you for your time and support...

http://www7.zippyshare.com/v/x4pZim6N/file.html

CLOVER.zip

Share this post


Link to post
Share on other sites

Hi MaLdOn,

Thank you for the files... Again, my system boots faster than before.  However, I still have issues with sleep as it will sleep for a moment but turns itself back on.  FYI, Sleep did work fine in Sierra.

Share this post


Link to post
Share on other sites
2 hours ago, cooldog820 said:

Hi MaLdOn,

Thank you for the files... Again, my system boots faster than before.  However, I still have issues with sleep as it will sleep for a moment but turns itself back on.  FYI, Sleep did work fine in Sierra.

run in terminal and past result here

log show --style syslog | fgrep "Wake reason"

 

Share this post


Link to post
Share on other sites

Was wondering if you could help me sort some issues with my g3258 build MaLd0n. The specs are in my signature. I initially had Sierra 10.12 on there and just recently updated to high sierra 10.13.3. I'm still having issues with my power management, mostly my sleep/wake functions.  Machine goes to sleep fine but can't wake up with mouse or keyboard. Have to wake it up by pressing power button, and even then it freezes a few seconds before i can type my password. Once im on desktop, it skips and freezes and sometimes reboots.  I managed to edit my own dsdt and applied some patches but you know more than i do so I'll leave the ball in your court.  Here's my DSDT.. I'll include raw and edited one with my config.plist and kexts folder and ACPI folder for dsdt dumps.

 

Z97 PC Mate + G3258.zip

Share this post


Link to post
Share on other sites
27 minutes ago, Blaggah said:

Was wondering if you could help me sort some issues with my g3258 build MaLd0n. The specs are in my signature. I initially had Sierra 10.12 on there and just recently updated to high sierra 10.13.3. I'm still having issues with my power management, mostly my sleep/wake functions.  Machine goes to sleep fine but can't wake up with mouse or keyboard. Have to wake it up by pressing power button, and even then it freezes a few seconds before i can type my password. Once im on desktop, it skips and freezes and sometimes reboots.  I managed to edit my own dsdt and applied some patches but you know more than i do so I'll leave the ball in your court.  Here's my DSDT.. I'll include raw and edited one with my config.plist and kexts folder and ACPI folder for dsdt dumps.

 

Z97 PC Mate + G3258.zip

Z97 PC Mate + G3258.zip

try with usb keyboard+mouse

Share this post


Link to post
Share on other sites
45 minutes ago, Eduardo Sanches said:

Already in this screen for 15 minutes. Does anyone know what can it be?
i5qf2ym.jpg

u drop all oem tables?

Share this post


Link to post
Share on other sites

I replaced my files with the ones you sent me back and am no longer able to boot.. Normal boot, just the apple logo and no progress bar.. In verbose mode, this is what i see

IMG_5395.JPG

IMG_5397.JPG

Share this post


Link to post
Share on other sites
11 minutes ago, MaLd0n said:

u drop all oem tables?

none, i'm trying to do a clean install and i don't have them yet

how can i get oem tables?

Edited by Eduardo Sanches

Share this post


Link to post
Share on other sites
On 3/13/2018 at 8:22 PM, MaLd0n said:

Hi @MaLd0n

I used ur clover and it pannic. I replace AptioMemoryFix.efi >>>OsxAptioFixDrv-64.efi It boot normal but It was fail that

20180314_172435.jpg

Spoiler

Anonymous UUID: BFFCA626-5A76-1788-10DB-684BB0854BA8 Tue Mar 13 18:51:06 2018 *** Panic Report *** panic(cpu 3 caller 0xffffff800041a46e): Kernel trap at 0xffffff80008d6479, type 14=page fault, registers: CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000132dbe024, CR4: 0x00000000000626e0 RAX: 0xffffff8000a15e20, RBX: 0xffffff801419a000, RCX: 0x0000000000000000, RDX: 0xffffff8016070600 RSP: 0xffffff80b2a8bc30, RBP: 0xffffff80b2a8bc80, RSI: 0xffffff7f80f3db56, RDI: 0x0000000000000000 R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x0000000000000142, R11: 0x0000000000000000 R12: 0x00000000e00002c2, R13: 0xffffff800ee37f80, R14: 0xffffff7f80f3db56, R15: 0xffffff8016070600 RFL: 0x0000000000010286, RIP: 0xffffff80008d6479, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x3 Backtrace (CPU 3), Frame : Return Address 0xffffff80b2a8b8e0 : 0xffffff800032fe41 0xffffff80b2a8b960 : 0xffffff800041a46e 0xffffff80b2a8bb20 : 0xffffff8000436683 0xffffff80b2a8bb40 : 0xffffff80008d6479 0xffffff80b2a8bc80 : 0xffffff7f80f3daf3 0xffffff80b2a8bcc0 : 0xffffff7f80f5c223 0xffffff80b2a8bd00 : 0xffffff80008b64c4 0xffffff80b2a8bd50 : 0xffffff80008fda75 0xffffff80b2a8bdc0 : 0xffffff80003e4f5e 0xffffff80b2a8be10 : 0xffffff8000333f8c 0xffffff80b2a8be40 : 0xffffff8000318a93 0xffffff80b2a8be90 : 0xffffff80003293bd 0xffffff80b2a8bf10 : 0xffffff80004059fa 0xffffff80b2a8bfb0 : 0xffffff8000436ea6 Kernel Extensions in backtrace: com.apple.iokit.IOUSBFamily(710.4.14)[4030C18E-76A0-37E6-9612-2C901F789E41]@0xffffff7f80f32000->0xffffff7f80fa2fff dependency: com.apple.iokit.IOPCIFamily(2.9)[56AD16B5-4F29-3F74-93E7-D492B3966DE2]@0xffffff7f80b24000 BSD process name corresponding to current thread: configd Boot args: slide=0 dart=0 kext-dev-mode=1 Mac OS version: 14C109 Kernel version: Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64 Kernel UUID: DCF5C2D5-16AE-37F5-B2BE-ED127048DFF5 __HIB text base: 0xffffff8000100000 System model name: MacBookPro8,1 (Mac-94245B3640C91C81) System uptime in nanoseconds: 5331285445802 last loaded kext at 116126153103: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f80dfc000, size 69632) last unloaded kext at 1328128265: org.rehabman.voodoo.driver.PS2Controller 1.8.28 (addr 0xffffff7f823ab000, size 45056) loaded kexts: com.tuxera.filesystems.tufsfs.fusefs_txantfs 2013.3.14 com.protech.NoSleep 1.4.0 com.intel.driver.EnergyDriver 2.0 org.emlydinesh.driver.ApplePS2SmartTouchPad 4.5 org.emlydinesh.driver.ApplePS2Keyboard 4.5 com.insanelymac.ALXEthernet 1.0.2 org.emlydinesh.driver.AsusNBFnKeys 2.5.5 com.CalDigit.driver.CalDigitUSBxHCI 1.3.8a2 org.emlydinesh.driver.ApplePS2Controller 4.5 org.rehabman.driver.AppleSmartBatteryManager 1.81.4 as.vit9696.AppleALC 1.2.1 org.tw.CodecCommander 2.6.1 com.sherlocks.IntelGraphicsDVMTFixup 1.2.0 com.rehabman.driver.USBInjectAll 0.6.2 as.lvs1974.IntelGraphicsFixup 1.2.0 as.vit9696.Lilu 1.2.1 org.netkas.driver.FakeSMC 1765 com.apple.filesystems.msdosfs 1.10 com.apple.driver.AppleUSBCDC 4.2.2b5 com.apple.driver.AudioAUUC 1.70 com.apple.driver.AppleHWSensor 1.9.5d0 com.apple.driver.AGPM 100.15.5 com.apple.driver.AppleTyMCEDriver 1.0.2d2 com.apple.iokit.IOBluetoothSerialManager 4.3.2f6 com.apple.driver.AppleMikeyHIDDriver 124 com.apple.filesystems.autofs 3.0 com.apple.driver.AppleHDAHardwareConfigDriver 269.25 com.apple.driver.AppleHDA 269.25 com.apple.driver.ApplePolicyControl 3.8.6 com.apple.driver.AppleUpstreamUserClient 3.6.1 com.apple.driver.AppleMikeyDriver 269.25 com.apple.driver.AppleMuxControl 3.8.6 com.apple.driver.AppleOSXWatchdog 1 com.apple.driver.AppleIntelHD3000Graphics 10.0.0 com.apple.driver.AppleBacklight 170.5.0 com.apple.driver.AppleSMCLMU 2.0.7d0 com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0 com.apple.driver.AppleLPC 1.7.3 com.apple.driver.AppleMCCSControl 1.2.11 com.apple.driver.AppleSMCPDRC 1.0.0 com.apple.iokit.IOUserEthernet 1.0.1 com.apple.Dont_Steal_Mac_OS_X 7.0.0 com.apple.driver.AppleHWAccess 1 com.apple.driver.AppleHV 1 com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0 com.apple.driver.AppleFileSystemDriver 3.0.1 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1 com.apple.BootCache 35 com.apple.driver.PioneerSuperDrive 3.5.1 com.apple.iokit.SCSITaskUserClient 3.7.3 com.apple.driver.XsanFilter 404 com.apple.driver.AppleUSBXHCI 710.4.11 com.apple.driver.AirPort.Atheros40 700.74.5 com.apple.iokit.IOAHCIBlockStorage 2.7.0 com.apple.driver.AppleUSBHub 705.4.2 com.apple.driver.AppleAHCIPort 3.1.0 com.apple.driver.AppleUSBEHCI 705.4.14 com.apple.driver.AppleACPIButtons 3.1 com.apple.driver.AppleHPET 1.8 com.apple.driver.AppleRTC 2.0 com.apple.driver.AppleSMBIOS 2.1 com.apple.driver.AppleACPIEC 3.1 com.apple.driver.AppleAPIC 1.7 com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0 com.apple.nke.applicationfirewall 161 com.apple.security.quarantine 3 com.apple.security.TMSafetyNet 8 com.apple.driver.AppleIntelCPUPowerManagement 218.0.0 com.apple.AppleGraphicsDeviceControl 3.8.6 com.apple.iokit.IOSerialFamily 11 com.apple.kext.triggers 1.0 com.apple.driver.DspFuncLib 269.25 com.apple.kext.OSvKernDSPLib 1.15 com.apple.driver.AppleGraphicsControl 3.8.6 com.apple.driver.AppleBacklightExpert 1.1.0 com.apple.iokit.IOUSBHIDDriver 705.4.0 com.apple.driver.AppleHDAController 269.25 com.apple.iokit.IOHDAFamily 269.25 com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.2f6 com.apple.driver.AppleSMBusPCI 1.0.12d1 com.apple.iokit.IONDRVSupport 2.4.1 com.apple.driver.IOPlatformPluginLegacy 1.0.0 com.apple.driver.AppleSMBusController 1.0.13d1 com.apple.iokit.IOUSBUserClient 705.4.0 com.apple.driver.IOPlatformPluginFamily 5.8.1d38 com.apple.iokit.IOSurface 97 com.apple.iokit.IOBluetoothFamily 4.3.2f6 com.apple.driver.AppleSMC 3.1.9 com.apple.iokit.IOGraphicsFamily 2.4.1 com.apple.driver.AppleUSBComposite 705.4.9 com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.3 com.apple.iokit.IOBDStorageFamily 1.7 com.apple.iokit.IODVDStorageFamily 1.7.1 com.apple.iokit.IOCDStorageFamily 1.7.1 com.apple.iokit.IO80211Family 710.55 com.apple.iokit.IOAHCISerialATAPI 2.6.1 com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3 com.apple.iokit.IONetworkingFamily 3.2 com.apple.driver.AppleEFINVRAM 2.0 com.apple.iokit.IOAHCIFamily 2.7.5 com.apple.iokit.IOUSBFamily 710.4.14 com.apple.driver.AppleEFIRuntime 2.0 com.apple.iokit.IOHIDFamily 2.0.0 com.apple.iokit.IOSMBusFamily 1.1 com.apple.security.sandbox 300.0 com.apple.kext.AppleMatch 1.0.0d1 com.apple.iokit.IOAudioFamily 203.3 com.apple.vecLib.kext 1.2.0 com.apple.driver.AppleKeyStore 2 com.apple.driver.AppleMobileFileIntegrity 1.0.5 com.apple.driver.AppleCredentialManager 1.0 com.apple.driver.DiskImages 396 com.apple.iokit.IOStorageFamily 2.0 com.apple.iokit.IOReportFamily 31 com.apple.driver.AppleFDEKeyStore 28.30 com.apple.driver.AppleACPIPlatform 3.1 com.apple.iokit.IOPCIFamily 2.9 com.apple.iokit.IOACPIFamily 1.4 com.apple.kec.corecrypto 1.0 com.apple.kec.Libm 1 com.apple.kec.pthread 1 Model: MacBookPro8,1, BootROM MBP81.004D.B00, 2 processors, Intel Core i3, 2.19 GHz, 4 GB, SMC 1.68f99 Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, Ramaxel Technology, RMT3010EC58E8F1333A Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, Kingston, unknown AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x2C37), Atheros 9285: 4.0.74.0-P2P Bluetooth: Version 4.3.2f6 15235, 3 services, 19 devices, 1 incoming serial ports Network Service: Wi-Fi, AirPort, en0 PCI Card: Intel Corporation, 6 Series Chipset IMEI Controller, IMEI Controller, Built In PCI Card: Intel Corporation, 6 Series Chipset USB Enhanced Host Controller #2, USB Controller, Built In PCI Card: Realtek ALC269 Audio Controller, Audio Controller, Built In PCI Card: Intel Corporation, 6 Series Chipset USB Enhanced Host Controller #1, USB Controller, Built In PCI Card: Intel Corporation, 6 Series Chipset SATA Controller, AHCI Controller, Built In Serial ATA Device: Corsair Neutron GTX SSD, 240.06 GB Serial ATA Device: PIONEER DVD-RW DVRTD11RS USB Device: Hub USB Device: Bluetooth USB Host Controller USB Device: ASUS USB2.0 WebCam USB Device: Hub USB Device: USB Optical Mouse Thunderbolt Bus:

 

Share this post


Link to post
Share on other sites
7 hours ago, Blaggah said:

I replaced my files with the ones you sent me back and am no longer able to boot.. Normal boot, just the apple logo and no progress bar.. In verbose mode, this is what i see

IMG_5395.JPG

IMG_5397.JPG

last clover version?

7 hours ago, Eduardo Sanches said:

none, i'm trying to do a clean install and i don't have them yet

how can i get oem tables?

F4 in Clover bootscreen

3 hours ago, vinhkm6 said:

Hi @MaLd0n

I used ur clover and it pannic. I replace AptioMemoryFix.efi >>>OsxAptioFixDrv-64.efi It boot normal but It was fail that

20180314_172435.jpg

  Reveal hidden contents

 

what kp u have with aptiomemoryfix?

Share this post


Link to post
Share on other sites

Guys, please, need help. Booted successfully, installed everything like in 1.st post. Everything works, except I can't get video out of DVI port on my graphic card. Have connected two monitors (HDMI+DVI), both are recognazible in Display Preferences, but can't get video out of DVI port. Tried to exchange monitors, but no luck. 
My specs are in signature. Thanks

Share this post


Link to post
Share on other sites
20 hours ago, MaLd0n said:

run in terminal and past result here


log show --style syslog | fgrep "Wake reason"

 

Hi MaLDOn, Sorry for my delay,

Here is the output:

Alberts-iMac1:~ aagbuya$ log show --style syslog | fgrep "Wake reason"
2018-02-14 17:22:26.262769-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-14 17:22:26.262770-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-16 16:52:01.623804-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-16 16:52:01.623805-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:14:42.299000-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:14:42.299000-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:16:05.464527-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:16:05.464528-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:17:23.374473-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:17:23.374474-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:18:44.738875-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:18:44.738875-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:20:04.035149-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:20:04.035150-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:21:24.704038-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:21:24.704039-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:22:44.113971-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:22:44.113972-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:24:04.808889-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:24:04.808890-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:25:23.994172-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:25:23.994173-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:26:44.360586-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:26:44.360587-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:28:02.761429-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:28:02.761430-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:29:23.600668-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:29:23.600669-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-25 05:40:04.169787-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-25 05:40:04.169788-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 18:52:01.450805-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 18:52:01.450805-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:18:18.896129-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:18:18.896130-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:20:52.606962-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:20:52.606963-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:24:22.890227-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:24:22.890228-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:28:10.105791-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:28:10.105792-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-08 20:30:55.080987-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-08 20:30:55.080987-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-15 16:15:40.837609-0700  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-15 16:15:40.837610-0700  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
Alberts-iMac1:~ aagbuya$


Thank you for your time...

 

Share this post


Link to post
Share on other sites

Dag nabbit! I failed to update the bootloader to the latest, i was running 4380 and i just managed to install 4411 now. Hopefully it boots this time.

Share this post


Link to post
Share on other sites
1 hour ago, cooldog820 said:

Hi MaLDOn, Sorry for my delay,

Here is the output:

Alberts-iMac1:~ aagbuya$ log show --style syslog | fgrep "Wake reason"
2018-02-14 17:22:26.262769-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-14 17:22:26.262770-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-16 16:52:01.623804-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-16 16:52:01.623805-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:14:42.299000-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:14:42.299000-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:16:05.464527-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:16:05.464528-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:17:23.374473-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:17:23.374474-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:18:44.738875-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:18:44.738875-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:20:04.035149-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:20:04.035150-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:21:24.704038-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:21:24.704039-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:22:44.113971-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:22:44.113972-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:24:04.808889-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:24:04.808890-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:25:23.994172-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:25:23.994173-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:26:44.360586-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:26:44.360587-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:28:02.761429-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:28:02.761430-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:29:23.600668-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-22 18:29:23.600669-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-25 05:40:04.169787-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-02-25 05:40:04.169788-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 18:52:01.450805-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 18:52:01.450805-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:18:18.896129-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:18:18.896130-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:20:52.606962-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:20:52.606963-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:24:22.890227-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:24:22.890228-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:28:10.105791-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-04 19:28:10.105792-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-08 20:30:55.080987-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-08 20:30:55.080987-0800  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-15 16:15:40.837609-0700  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
2018-03-15 16:15:40.837610-0700  localhost kernel[0]: (AppleACPIPlatform) Wake reason: XHC
Alberts-iMac1:~ aagbuya$


Thank you for your time...

 

try

use power button for wake

DSDT.aml.zip

Share this post


Link to post
Share on other sites

I think i might have to do a whole new installation. Now i can't even get to clover bootloader anymore. Somehow, hard drive isn't being detected..

Share this post


Link to post
Share on other sites
49 minutes ago, MaLd0n said:

try

use power button for wake

DSDT.aml.zip

Hi MaLdOn,

Great!  It works! Just as you described... I just need to use the power button to wake it up.

Thank you again for your time.

Share this post


Link to post
Share on other sites
55 minutes ago, Blaggah said:

I think i might have to do a whole new installation. Now i can't even get to clover bootloader anymore. Somehow, hard drive isn't being detected..

if u have a time, try a fresh install with same folder, i think work

36 minutes ago, cooldog820 said:

Hi MaLdOn,

Great!  It works! Just as you described... I just need to use the power button to wake it up.

Thank you again for your time.

Welcome!

Enjoy!

Share this post


Link to post
Share on other sites
1 hour ago, cooldog820 said:

Hi MaLdOn,

Great!  It works! Just as you described... I just need to use the power button to wake it up.

Thank you again for your time.

Yeah I yeah that's what I'm going to do. I think my 2tb drive went. I'm now trying on an SSD. Sierra that is. I'll stick with Sierra. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By karthiksh1989
      can somebody walkthrough with the mojave installation guide?
      i have a mac high sierra 13.6 version on my macbook pro and want to install mojave on my desktop
      Exact config is Gigabyte gaming wifi 7 motherboard amy ryzen 7 2nd gen 2700X processor Gigabyte G1 8GB grapgic card VEGA 64
      running 2 nvme Samsung 256gb cards and 1 intel 180gb ssd internal and 1tb WD HDD, with 64 GB 3200Mhz Ram
       
      https://wa.me/919611736534 (whatsapp)
    • By ltooz_audis
      I always want to have a long lasting battery ultrabook to install Mojave on. I was looking at Dell XPS 13 but its design is not very good with the camera and other problems. HP Spectre x360 is a nice design but the wifi module is soldered on board. The Envy 13" is the best one in the bunch for MacOS Mojave. I would not use any other macOS besides Mojave, it's the best one so far. If you can't get it done with macOS Mojave, you don't do it correctly, it's much more refined and given than older macOS's.
      I wanted the 8th generation because of the 4 cores which is almost 1.5 times faster than this 7th generation i7-7500u, but the price is too high. I picked up this one on Craigslist for $400. I've just ordered the 500GB NVME WD Black for $104 and DW1560 for $29. So, the perfect MacBook Pro 14,2 is less than $600 that last 5-6 hours with Mojave and 8-9 hours on Windows 10. The bench mark is the same as the real MacBookPro 14,2. BTW, this is the first try, there will be on going testing and confirming. 250GB hard drive is hardly enough for dual boot Windows and Mac. You need at least 500GB, I don't use Windows at all, so I'll partition 200GB for Windows and 300GB for Mojave.
      All new HP laptops will have kernel panic if using Clover to boot UEFI, at least a fix was found. I'll have more videos and info when I have time to write them. Watch the videos and ask questions if you have any problems.
      1. Clover 4558 - Lilu.kext (1.3.3) - AppleALC.kext (1.3.1) - Whatevergreen.kext (1.2.3) - USBInjectAll.kext (0.6.5) - Fakesmc.kext (6.25-332-gf3a8525c.1758) - ACPIBatteryManager.kext (1.81.4) - AHCIPortInjector.kext - BrcmFirmwareRepo.kext (2.2.7) - BrcmPatchRAM2.kext (2.2.7) - CodecCommander.kext (2.6.2) - FakePCIID_Broadcom_WiFi.kext (1.3.9) - FakePCIID_Intel_HD_Graphics.kext (1.3.9) - FakePCIID.kext (1.3.9) - SSDT-AUIC-ALL.aml - SSDT-USBX.aml - SSDT-PNLF.aml - SSDT-PluginType1.aml - PreLoader.efi.
      2. For the keys F2 & F3 to work with backlight slider - the Fakesmc.kext version is important for some reasons, I'm still trying to find out why.
      The touchscreen actually works without the voodooI2C kexts, just need to patch the clover.
       
      I've been playing with the laptop for over a week now. Ordered the WD 500GB WDS500G2X0C from Amazon for $104, the 256GB is too small for dual booting Windows 10 & Mojave. It's really plug and play.
       
      Hardware - needed to make this a perfect macbook Pro14,2.
      1. DW1560 BCM94352Z - make sure it has 2 notches - Tape the 2 right pins on the 4 pins tab for it to work without a hitch on both Windows 10 and Mojave. You can buy from Ebay cheaper but you have to wait for months.
      2. 500GB NVMe SSD m.2 connector M is a must for dual boot - the cheaper one will be slower - Crucial NVMe 500GB is $25 less than WD.
      3. NOVOO USB-C to HDMI hub that works and inexpensive.
       
      Let's start to get this Kaby Lake working on the HP - I believe HP has the same components for similar configuration on different models. In order to get Mojave to work on Intel Laptop, we need a few important components - Sound is important (look for Realtek - ALC295) - Ethernet if any -Realtek - Trackpad  and TouchScreen (Synaptics or Elan).
       
      REPLACE VNMe SSD HARD DRIVE and DW1560 BCM94352Z
       
      The current BIOS is F22, the newest one is F27 but I don't want to update since it's working well. Since I don't really need the original Windows 10 with Junk software in it, I install the latest Windows 10 using Media Creation USB Boot Drive. The important thing is we have to prepare the SSD correctly or our EFI folder will only be set at 100MB which is not enough to install Clover or any other boot loaders. So instead of letting the Windows installer to create the EFI folder automatically, we can set the size ourselves using "diskpart" command. In order to use diskpart, we need to boot with Windows 10 USB installer (hit F9 then select UEFI USB installer) - select system repair and not installation - then select command prompt, from here we can create EFI folder and MSR for Windows installer to install. The product ID is already in the UEFI bios, so we don't really have to manually activate the Windows 10.

       
       
      diskpart
      select disk 0
      clean
      convert gpt
      create partition efi=300 !!! you can change it from 300MB to any size.
      format quick fs=fat32 label="EFI"
      create partition msr size=16
      exit

      After exit, reboot with the USB installer again in UEFI mode, select the custom. The Windows installer will select the 300MB EFI folder we've just created.
       
       
      How to fix KP on Clover UEFI Boot.
       
       
      This is the macBook Pro 14,2 from HP 13-ad010nr
       
       
       
      Louis
       
    • By yehia2amer
      Problem:
      When I Attempt to wake my Machine from sleep, the screen stays black, although the computer is obviously awake !
      This Machine has a 1300W Power Supply So Sleep is Very Useful.
       
      I Tried:
      1) FIX_WAK and FixShutdown as per Clover Wiki.
      2) Although I am using "SAPPHIRE Radeon PULSE RX 580 8GB GDDR5", which Should be completely Supported by Mojave, I Also changed the Part Number to "113-4E353BU-O4E" as per this Guide: http://www.xlr8yourmac.com/archives/feb18/RadeonRX-580_MacPro.html. The GPU is working GREAT without even Clover Inject
      3) Tried to Run this command: disablehibernate.command.zip
      4) Tried darkwake=0 to 10
      5) Disabled wake on USB & Wake on LAN (BIOS)
       
      Logs:
      sudo pmset -g
      System-wide power settings: Currently in use: hibernatemode 0 disksleep 10 womp 0 networkoversleep 0 sleep 0 Sleep On Power Button 1 ttyskeepawake 1 hibernatefile /var/vm/sleepimage autorestart 0 gpuswitch 2 displaysleep 10 pmset -g assertions
      2019-02-19 18:51:04 +0200 Assertion status system-wide: BackgroundTask 1 ApplePushServiceTask 0 UserIsActive 1 PreventUserIdleDisplaySleep 0 PreventSystemSleep 0 ExternalMedia 1 PreventUserIdleSystemSleep 0 NetworkClientActive 0 Listed by owning process: pid 56(powerd): [0x0000001700088000] 00:13:44 ExternalMedia named: "com.apple.powermanagement.externalmediamounted" pid 100(hidd): [0x00000025000980a7] 00:00:00 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968578.17" Timeout will fire in 600 secs Action=TimeoutActionRelease pid 200(mds_stores): [0x0000034e000b8279] 00:00:00 BackgroundTask named: "com.apple.metadata.mds_stores.power" Kernel Assertions: 0x4=USB id=502 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d130000 owner=USB Keyboard id=503 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d120000 owner=Lenovo Optical Mouse Idle sleep preventers: IODisplayWrangler  
      Specs:
      CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors
      RAM: 128 GB 1333 MHz DDR3 ECC Memory
      GPU: SAPPHIRE Radeon PULSE RX 580 8GB GDDR5
      Chipset: Intel C602
      Audio: Realtek ALC3220 (ALC280) High Definition Audio
      SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4  
      Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
      Network Controller 2: Intel Ethernet Controller I210 
      NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
       
      for more info:
       
      Any Help will be appreciated, Thanks !
       
      Send me Yehias-Mac-Pro.zip
    • By yehia2amer
      Dell Precision T7610 Workstation
      Hackintosh GUIDE (Work in Progress)
       
                        
      Introduction: 
      Hi Everyone,
      This Workstation used to be a Beast with Dual CPUs and tons of RAM, I Know it is now normal to get that much cores in a Desktop but it is still a very decent machine for me (As a Programmer), and I thought it would be a good idea to Install MacOS as the Daily Driver Rather than Linux and It turns out to be a very Great Experience (with Some Challenges ).
       
      Specs:
      CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors RAM: 128 GB 1333 MHz DDR3 ECC Memory GPU: SAPPHIRE PULSE Radeon RX 580 8GD5 Chipset: Intel C602 Audio: Realtek ALC3220 (ALC280) High Definition Audio SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4  Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
      Network Controller 2: Intel Ethernet Controller I210
      NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
       
      Working:
      Both "Xeon E5-2680 v2" and all cores with Power Management and P-States (using VoodooTSCSync & ssdtPRGen.sh) ATI Radeon HD 4870 (Vanilla) Realtek ALC3220 (ALC280)  (using VoodooHDA till Now - it is partially working with AppleALC using layout-id 13) LSI 2308 SAS (using AstekFusion2) Intel 82579 Network Controller (Vanilla) Intel I210 Network Controller (IntelMausiEthernet) USB 2.0  
      Not Working:
      NEC USB3.0 xHCI Controller (Renesas Electronics uPD720201 & uPD720202) Sleep  
      https://github.com/yehia2amer/Dell-Precision-T7610-Workstation-Hackintosh-Guide
    • By wen1
      Work in progress
       
      This is mini guide and config files for installing Mojave on a Dell XPS 13 9370.
       
      I took inspiration from sensibleJoe at on reddit
       
      My laptop's specs
       
      i7-8550U Intel HD 620 Graphics UHD Display 256GB Samsung NVMe SSD PM961 Killer 1435 Wifi  
      Here is what works
       
      Intel HD Graphics  Sleep Sound & Mic USB Wifi (Internal Killer Wifi will not work) Bluetooth Power Management Battery Management Screen Brightness Control  
      What does not work
       
      Internal Wifi Camera SD Card reader  
       
       
      I followed the vanilla guide here to create the Mac OS Mojave install USB. I used Mac OS 10.14.3.
       
      Here are some rough steps
       
      1. Create the USB installer for Mojave. You can use apple's own instructions
      2. Once the installer USB creation is complete, Install the latest version of clover to the USB disk with the following options 
      Install Clover for UEFI booting only
      Install Clover to the ESP
       
      Leave everything else as default (minimal install without a bunch of drivers)
       
      3. Then mount the EFI folder on the USB drive and replace the files in the config folder with the ones from the attached zip file over writing the files already there. This config is specifically for Dell XPS 13 9370.
      4. Go into the UEFI/BIOS on the laptop, Make sure your SATA mode is set to AHCI (And not Raid). Save and Exit
      5. Boot with the USB disk and install Mojave
      6. After the install is complete, Use the USB to boot again but this time boot into the newly installed Mojave partition.
      7. Install Clover on to the SSD with the same options as before.
      8. Then copy the config files to the EFI folder on the SSD overwriting the config folder there.
      9. Acquire the backlight AppleBacklightFixup.kext from here and install to /Library/Extensions (Thanks to Rehabman for the kext)
      10. Reboot.
       
      EDIT: V4 fixes many things, like powermanagement, backlight control etc. you also need to install AppleBacklightFixup.kext to /Library/Extensions
       
       
      CLOVER-v4.zip
×