Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,333 posts in this topic

Recommended Posts

try

attachicon.gifCLOVER.zip

test it

attachicon.gifDSDT.aml.zip

Hi MaLd0n

Tks you very much

I test your file sent to me

Problem is The monitor has no signal but the hard drive light is on

My computer have 2 usb 2.0 and 1 usb 3.0 (asmedia)

I connect usb, mouse ....to port usb 3.0 but no signal

I think this problem is usb asmedia  ;) 

This is ioreg

https://app.box.com/s/pps3db23hlqddlu78uio0kp5li8og8qu

Share this post


Link to post
Share on other sites
Advertisement

 

If you need a full patched DSDT... 

-Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) and tell me what your hardware!

 

 

My system:

Mobo: AsRock x79 Extreme 6 (P2.50)

CPU: i7-4930K @ 3.40ghz

Graphics: nvidea GeForce gtx 770

 

i created a bootstick with the help of your guide, and after that didn't work with pavo's guide. i get the same result with both options, here, when i try booting without the usb stick, all i see is:

reboot and select proper boot device

 

i've tried with, the stock config file, with your post clover folder, with 2 or 3 i could find in this thread to be exact, but all with no luck.

 

where did i go wrong?

Share this post


Link to post
Share on other sites

put ur nvidia, install web driver

attachicon.gifCLOVER.zip

 

Many thanks again - Nearly working! Had a small delay because my NVIDIA card had to be RMAd...

 

I have 3 small problems.

The keyboard and mouse don't work on the clover screen. 

When the computer tries to sleep, it gets as far as power down and then immediately starts again

When I boot into OSX, for some reason my RAM profile in the BIOS resets to a slower speed.

 

Any idea how I can solve these?

Share this post


Link to post
Share on other sites

Many thanks again - Nearly working! Had a small delay because my NVIDIA card had to be RMAd...

 

I have 3 small problems.

The keyboard and mouse don't work on the clover screen. 

When the computer tries to sleep, it gets as far as power down and then immediately starts again

When I boot into OSX, for some reason my RAM profile in the BIOS resets to a slower speed.

 

Any idea how I can solve these?

try

DSDT.aml.zip

My system:

Mobo: AsRock x79 Extreme 6 (P2.50)

CPU: i7-4930K @ 3.40ghz

Graphics: nvidea GeForce gtx 770

 

i created a bootstick with the help of your guide, and after that didn't work with pavo's guide. i get the same result with both options, here, when i try booting without the usb stick, all i see is:

reboot and select proper boot device

 

i've tried with, the stock config file, with your post clover folder, with 2 or 3 i could find in this thread to be exact, but all with no luck.

 

where did i go wrong?

use boot key, asus is f8, gigabyte is f12, etc

Share this post


Link to post
Share on other sites

it's f11 for me, but that's what i get when i try to boot from the disk that i installed everything on. when i try to boot from the disk called mac os x (which i think is the efi drive) nothing happens, the boot screen just refreshes.

Share this post


Link to post
Share on other sites

what options u install clover in usb stick?

 

i used:

install for uefi booting only

install clover in the esp

bootloader: don't update mbr and pbr sectors

themes (i guess what was set by default)

drivers64uefi: osxaptiofix2drv-64

 

i used clover configurator to add npci=0x2000, and nv_disable=1 and nvda_drv=1 i guess.

Share this post


Link to post
Share on other sites

the boot stick works, but i'll do that. and should i use those settings for the hard drive as well, when i clover it?

ye

Share this post


Link to post
Share on other sites

Mald0n thank you so much. you are a freaking blessing to this scene. i asked at the tmx forums, nobody could really help me. i asked here in the chat, and they tried a lot of different things with me, but none of them got it working. you made it happen though. thank you, stay blessed, and enjoy the holidays. merry christmas.

Share this post


Link to post
Share on other sites

Mald0n thank you so much. you are a freaking blessing to this scene. i asked at the tmx forums, nobody could really help me. i asked here in the chat, and they tried a lot of different things with me, but none of them got it working. you made it happen though. thank you, stay blessed, and enjoy the holidays. merry christmas.

fine tune done? 

send me dsdt, need some patches

Share this post


Link to post
Share on other sites

Hi Maldon, I'm need help with Sierra on asus h61m-k

 

 

Using your clover folder,no changes made.

 

Specs: igpu hd 2500, i5 3330, 4gb ram

 

BIOS config:

- csm disabled

- hpet enabled

- Intel speedstep disabled

- sata ahci mode

- USB 2.0 ehci enabled

- legacy USB support enabled

- EHCI Hand-off enabled

- fastboot disabled

 

Thanks you

 

post-1325453-0-05082200-1512879979_thumb.jpg

Share this post


Link to post
Share on other sites

Hi all guys,

 

I have a problem booting the installation from the bootable usb. I always get a KP about 'System uptime in nanoseconds ...'. My desktop hw specs are the following:

 

CPU: i7 4820k

GPU: gtx 760

MOBO: OEM

 

Can you give me some advice on how to make work at least the bootable usb  :rolleyes:

 

P.S. I would attach the image of the error, but there is no attaching option directly from the pc for me. If you want I can host it somewhere and give you the link, just tell me how it would be better for you. If you need any other info, just tell me, maybe the config.plist file or anything that could help.

 

Thanks you

Share this post


Link to post
Share on other sites

Hi all guys,

 

I have a problem booting the installation from the bootable usb. I always get a KP about 'System uptime in nanoseconds ...'. My desktop hw specs are the following:

 

CPU: i7 4820k

GPU: gtx 760

MOBO: OEM

 

Can you give me some advice on how to make work at least the bootable usb :rolleyes: .

 

P.S. I would attach the image of the error, but there is no attaching option directly from the pc for me. If you want I can host it somewhere and give you the link, just tell me how it would be better for you. If you need any other info, just tell me, maybe the config.plist file or anything that could help.

 

Thanks you

Post photo

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By mossy
      so im trying to install El Capitan on my old laptop but im having mouse issues i tried all the kext and looked online 
       
      this is TUT i followed 
       
      https://osxlatitude.com/forums/topic/8645-dell-latitude-d630-with-core2duo-and-nvidia-quadro-nvs-135m-el-capitansierra/
       
      ASUS K50IN T6500
    • By dbx103
      I Have Full and meta display, I can't control display.
      debug_27160.zip
    • By End3rPower50
      Hi, i've installed on my pc MacOS Mojave but after installation my pc, sometimes, crash giving kernel panic.
      I came to the conclusion that it is a random kernel panic because sometimes it starting up and other times it isn't starting up
       
      My PC:
      CPU: Intel i7 6500U
      LAN: RTL8100
      Wi-Fi & Bluetooth: Dell DW1820A
      USB 3.1
       
      CLOVER.zip
    • By maxneko
      TLDR: I've gotten myself up a creek without even a working keyboard and mouse. 
       
      My setup
       
      Asus X99 Deluxe motherboard
      Dual Asus Radeon R9 280x GPU's
      i7 5930K CPU
      G.Skill - Ripjaws Series 32 GB (4 x 8 GB) DDR4-2400 Memory
      Highpoint 2721 RAID controller + 4 hard drives
      EVO 850 Pro SSD
      Mojave 10.14.4
      Profile: MacPro6,1
       
      I had installed Mojave and had set it up to boot directly into my user account with no need for a password. Both Clover and IORegistryExplorer were set as log-in items. This was because I was working on activating my SS ports. The X99 Deluxe USB ports are set up as follows:
       
      USB3_E1 to USB3_E10 at the rear (Asmedia controller)
      USB_13 & USB_14 at the rear (Intel)
      USB1112 & USB1314 (headers on the motherboard)
      USB3_12 & USB3_34 (front)
       
      This adds up to potentially 34 ports, far more than I need. I had three patches enabled to remove the 15 port limit but they weren't doing the trick. So I disabled the ten USB3 ports on the rear that are subject to the Asmedia controller in BIOS. I also disabled the Asmedia USB3 controller. All I really need are the four USB3 ports on the front panel, along with one of the motherboard USB2 headers. This should have gotten me down to under 15 ports. One SS port appeared in IORegistryExplorer but I couldn't locate it when I tested every active port.
       
      I'm not sure what I did but everything went sideways. I found that I was booting into Mojave, Clover and IORegistryExplorer were launching but the mouse cursor was frozen in the corner and the keyboard was dead. Moving the keyboard and mouse to different ports didn't help. Meanwhile the OS was giving me a message about looking for a BT keyboard which I don't have. 
       
      I've tried the following to no avail:
       
      -- reinstalling Mojave
      -- various combinations of USBInjectAll.kext, XHCI-X99-injector.kext, X99_Injector USB 3.kext, and GenericUSBXHCI.kext
      -- resetting the CMOS
      -- enabling and disabling the ten Asmedia USB3 ports on the rear
      -- enabling and disabling the port limit patches below:
       

       

       
      I haven't reflashed my BIOS which is something I do when starting from scratch, although I don't see why it would matter. I'm open to that, burning incense, whatever will help.  In the end, I need at least 1-2 working USB3 ports. But right now, I just need to get my keyboard and mouse working again. I've been going in circles on this all day and could really use some good ideas.
       
      Thanks so much.
       
      Max
       
      config copy.plist
    • By dbx103
      I have been trying to get the backlight to work please help.
      debug_7898.zip
×