Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,282 posts in this topic

Recommended Posts

Advertisement

same files for both system ;)

 

CodecCommander for Alc1150 is a good idea, go to Sierra 10.12.4 and let me know

Share this post


Link to post
Share on other sites

Do I use the Clover folder you sent me for the Sierra install (on the USB), but replace the DSDT with the one you sent me that works?

 

The screenshot you took of the Clover Screen.  What is checked to install inside of the "Drivers64UEFI"  Option?  In the past I have just used OsxAptioFix2Drv-64

Share this post


Link to post
Share on other sites

after install Sierra

Install Clover with options above, dont need check in drivers, my folder have all u need, just replace

http://www.insanelymac.com/forum/topic/323052-sierra-on-intel-5-6-7-8-9-and-10-chipset-series-nehalem-sandybridge-ivybridge-haswell-skylake/?p=2413230


if u have problem, use same folder but changed DSDT, use it

http://www.insanelymac.com/forum/topic/323052-sierra-on-intel-5-6-7-8-9-and-10-chipset-series-nehalem-sandybridge-ivybridge-haswell-skylake/?p=2413304

but use only if u have problem, all u need have inside Clover folder

Share this post


Link to post
Share on other sites

Hey hey,

 

Mind lending me a hand with my DSDT / checking it over?

 

Changes made to the DSDT:

- Injected layout-id (probably incorrectly as I still need the HDAEnabler)

- Fixed codepaths not returning a value by appending return (Zero)

- Removed random Arg0 after a return statement causing an unexpected end of file

- Fixed possible timeout error by changing 0x0FFF to 0xFFFF

- Removed unused locals

- Removed 20+ lines of Zero repeated

 

The SSDT.aml is the output from the latest version of ssdtPRGen.sh.

 

System: Dell Inspiron 3847

Graphics card: r9 270

CPU: i5-4440

Memory: 8gb

SSD: 1x Samsung Pro

HDD: 1x WD Black 3tib

Lan: RTL8168G / 8111G via Realtek8111.kext

Audio: ALC662v2 via AppleALC.kext

 

Links:

System specs (for reference): https://downloads.dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/inspiron-3847-desktop_reference%20guide_en-us.pdf

IOReg: https://mega.nz/#!lNpiUYJB!XlaNWUyYgacLCsbSKMfBQLebihFHYbexzl9PchV2kvs

App output: https://mega.nz/#!xdoXkSqb!HXgXo1M13QuhppHfZs5eBPODlM0UHzRYMzl_Z2U0-4g

Clover: https://mega.nz/#!5RQwlLZI!8_HBy9jqLCh7RJPr_wF3yErUgVQ97yrqI-3jjWII7Y0

Share this post


Link to post
Share on other sites

System: Dell Inspiron 3847

CLOVER.zip

for Alc662 u can try id 5, 7, 11 and 12, if dont work native, u need a AppleHdaPatcher, yes!

MaLd0n, wow, wow and more Wow.

 

Everything under 10.12.4 works like a complete charm, and the rig is smoking fast in booting up.

 

So Smoooooooth!

 

Thank you ever so much.

Welcome!

Enjoy!

Share this post


Link to post
Share on other sites

attachicon.gifCLOVER.zip

for Alc662 u can try id 5, 7, 11 and 12, if dont work native, u need a AppleHdaPatcher, yes!

Welcome!

Enjoy!

 

Wow! I am floored by how much of a change a proper DSDT / clover configuration can make. I can't test HDMI audio out unfortunately so I can't comment on if that's working or not. The audio is working just fine without the hda enabler loading. The only issue I have left to fix on my system is the graphics not waking from boot, but that's a known AMD issue from the looks of it on <= 10.11.

 

Thanks a lot for taking a look at my setup MaLd0n!

 

Edit:

 

Looking at hwmonitor from rehabman / fakesmc it looks like only drive temps and ssd life remaining is showing. It use to include fan speeds, temps, etc. This could be due to my ssdt changes from earlier. Should I try adding the other ssdt-# files into my patched folder (after fixing any errors of course)?

Edited by FFForever

Share this post


Link to post
Share on other sites

fakesmc sensors cause many problems in many cases, but if u can test use it

Just replace in Clover/Kexts/Other

attachicon.gifFakeSMC.SENSORS.zip

and Check with HWMonitor

attachicon.gifHWMonitor.app.zip

 

Ah. I was using hwmonitor as a way to test speedsteping / monitor temperatures. Do you have a recommendation on something else to use?

 

I noticed in my verbose boot output I have ACPI errors relating GPX0 with a note on AE_NOT_FOUND. I tried searching console for ACPI, and found nothing. Is there a log file I can check to get the exact error?

Share this post


Link to post
Share on other sites

AE_NOT_FOUND

it is common to see these in 10.12 with this new version of AppleACPIPlatform.kext. Older versions of OS X didn't do checks like this. ;)

 

Check ur speedstep use IGP

Intel® Power Gadget SIERRA.zip

 

Send me new ioreg

IORegistryExplorer 3.app.zip

Share this post


Link to post
Share on other sites

it is common to see these in 10.12 with this new version of AppleACPIPlatform.kext. Older versions of OS X didn't do checks like this. ;)

 

Check ur speedstep use IGP

attachicon.gifIntel® Power Gadget SIERRA.zip

 

Send me new ioreg

attachicon.gifIORegistryExplorer 3.app.zip

 

ioreg: https://mega.nz/#!xUxHVDaT!G3mHO3-sE8zHz3dZ1NmWMOjarLipUAxYFDXCb4mC-W0

 

Does this look like it's stepping correctly? Even with a 90%+ idle system it's still hovering around the max frequency with minor drops.

 

f9jiWRb.png

Share this post


Link to post
Share on other sites

generate NEW SSDT PM with Pike script

attachicon.gifssdtPRGen.command.zip

replace SSDT

run it

attachicon.gifOlarila.command.zip

reboot

 

Check again

 

Looks like it's still favoring the high frequency. I've attached ~/library/ssdtprgen's content, the ACPI folder contains the original ssdt/acpi, and the patched dsdt. It was complaining that they didn't exist so I copied them in, and ran it again.

 

Should I ignore the error, and run it again with the files deleted?

 

ssdtPRGen: https://mega.nz/#!EM5FWIpT!mxugJtnLgR8pNwcGZyF4CFXMaIjg_Z5rvKYS2eJN_Qk

 

MtDnJpn.png

Share this post


Link to post
Share on other sites

test it, just replace

attachicon.gifconfig.plist.zip

let me know

 

need sleep now, 2:50am, tomorrow we check it

 

Good Nit!

 

Thanks again for all of your help last night :).

 

The new config doesn't seem to change the speedstepping. Even with idle loads I'm still seeing the same frequencies for the most part.

Share this post


Link to post
Share on other sites

very strange

take a test with Clover PM

Remove SSDT and replace config.plist

attachicon.gifconfig.plist.zip

 

Hmm it still doesn't appear to be stepping correctly. Should I try clearing the nvram? 

 

I checked the power widget in Windows (and recorded a log) to verify speed stepping is working correctly / there's no MSR lock.

 

PwrData csv: https://mega.nz/#!IchWTYKB!K-bDnOC0UjIUEjR04PLy-vp2JEY71EZgYOy1zidSB1Y

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member

  • Similar Content

    • By karthiksh1989
      can somebody walkthrough with the mojave installation guide?
      i have a mac high sierra 13.6 version on my macbook pro and want to install mojave on my desktop
      Exact config is Gigabyte gaming wifi 7 motherboard amy ryzen 7 2nd gen 2700X processor Gigabyte G1 8GB grapgic card VEGA 64
      running 2 nvme Samsung 256gb cards and 1 intel 180gb ssd internal and 1tb WD HDD, with 64 GB 3200Mhz Ram
       
      https://wa.me/919611736534 (whatsapp)
    • By ltooz_audis
      I always want to have a long lasting battery ultrabook to install Mojave on. I was looking at Dell XPS 13 but its design is not very good with the camera and other problems. HP Spectre x360 is a nice design but the wifi module is soldered on board. The Envy 13" is the best one in the bunch for MacOS Mojave. I would not use any other macOS besides Mojave, it's the best one so far. If you can't get it done with macOS Mojave, you don't do it correctly, it's much more refined and given than older macOS's.
      I wanted the 8th generation because of the 4 cores which is almost 1.5 times faster than this 7th generation i7-7500u, but the price is too high. I picked up this one on Craigslist for $400. I've just ordered the 500GB NVME WD Black for $104 and DW1560 for $29. So, the perfect MacBook Pro 14,2 is less than $600 that last 5-6 hours with Mojave and 8-9 hours on Windows 10. The bench mark is the same as the real MacBookPro 14,2. BTW, this is the first try, there will be on going testing and confirming. 250GB hard drive is hardly enough for dual boot Windows and Mac. You need at least 500GB, I don't use Windows at all, so I'll partition 200GB for Windows and 300GB for Mojave.
      All new HP laptops will have kernel panic if using Clover to boot UEFI, at least a fix was found. I'll have more videos and info when I have time to write them. Watch the videos and ask questions if you have any problems.
      1. Clover 4558 - Lilu.kext (1.3.3) - AppleALC.kext (1.3.1) - Whatevergreen.kext (1.2.3) - USBInjectAll.kext (0.6.5) - Fakesmc.kext (6.25-332-gf3a8525c.1758) - ACPIBatteryManager.kext (1.81.4) - AHCIPortInjector.kext - BrcmFirmwareRepo.kext (2.2.7) - BrcmPatchRAM2.kext (2.2.7) - CodecCommander.kext (2.6.2) - FakePCIID_Broadcom_WiFi.kext (1.3.9) - FakePCIID_Intel_HD_Graphics.kext (1.3.9) - FakePCIID.kext (1.3.9) - SSDT-AUIC-ALL.aml - SSDT-USBX.aml - SSDT-PNLF.aml - SSDT-PluginType1.aml - PreLoader.efi.
      2. For the keys F2 & F3 to work with backlight slider - the Fakesmc.kext version is important for some reasons, I'm still trying to find out why.
      The touchscreen actually works without the voodooI2C kexts, just need to patch the clover.
       
      I've been playing with the laptop for over a week now. Ordered the WD 500GB WDS500G2X0C from Amazon for $104, the 256GB is too small for dual booting Windows 10 & Mojave. It's really plug and play.
       
      Hardware - needed to make this a perfect macbook Pro14,2.
      1. DW1560 BCM94352Z - make sure it has 2 notches - Tape the 2 right pins on the 4 pins tab for it to work without a hitch on both Windows 10 and Mojave. You can buy from Ebay cheaper but you have to wait for months.
      2. 500GB NVMe SSD m.2 connector M is a must for dual boot - the cheaper one will be slower - Crucial NVMe 500GB is $25 less than WD.
      3. NOVOO USB-C to HDMI hub that works and inexpensive.
       
      Let's start to get this Kaby Lake working on the HP - I believe HP has the same components for similar configuration on different models. In order to get Mojave to work on Intel Laptop, we need a few important components - Sound is important (look for Realtek - ALC295) - Ethernet if any -Realtek - Trackpad  and TouchScreen (Synaptics or Elan).
       
      REPLACE VNMe SSD HARD DRIVE and DW1560 BCM94352Z
       
      The current BIOS is F22, the newest one is F27 but I don't want to update since it's working well. Since I don't really need the original Windows 10 with Junk software in it, I install the latest Windows 10 using Media Creation USB Boot Drive. The important thing is we have to prepare the SSD correctly or our EFI folder will only be set at 100MB which is not enough to install Clover or any other boot loaders. So instead of letting the Windows installer to create the EFI folder automatically, we can set the size ourselves using "diskpart" command. In order to use diskpart, we need to boot with Windows 10 USB installer (hit F9 then select UEFI USB installer) - select system repair and not installation - then select command prompt, from here we can create EFI folder and MSR for Windows installer to install. The product ID is already in the UEFI bios, so we don't really have to manually activate the Windows 10.

       
       
      diskpart
      select disk 0
      clean
      convert gpt
      create partition efi=300 !!! you can change it from 300MB to any size.
      format quick fs=fat32 label="EFI"
      create partition msr size=16
      exit

      After exit, reboot with the USB installer again in UEFI mode, select the custom. The Windows installer will select the 300MB EFI folder we've just created.
       
       
      How to fix KP on Clover UEFI Boot.
       
       
      This is the macBook Pro 14,2 from HP 13-ad010nr
       
       
       
      Louis
       
    • By yehia2amer
      Problem:
      When I Attempt to wake my Machine from sleep, the screen stays black, although the computer is obviously awake !
      This Machine has a 1300W Power Supply So Sleep is Very Useful.
       
      I Tried:
      1) FIX_WAK and FixShutdown as per Clover Wiki.
      2) Although I am using "SAPPHIRE Radeon PULSE RX 580 8GB GDDR5", which Should be completely Supported by Mojave, I Also changed the Part Number to "113-4E353BU-O4E" as per this Guide: http://www.xlr8yourmac.com/archives/feb18/RadeonRX-580_MacPro.html. The GPU is working GREAT without even Clover Inject
      3) Tried to Run this command: disablehibernate.command.zip
      4) Tried darkwake=0 to 10
      5) Disabled wake on USB & Wake on LAN (BIOS)
       
      Logs:
      sudo pmset -g
      System-wide power settings: Currently in use: hibernatemode 0 disksleep 10 womp 0 networkoversleep 0 sleep 0 Sleep On Power Button 1 ttyskeepawake 1 hibernatefile /var/vm/sleepimage autorestart 0 gpuswitch 2 displaysleep 10 pmset -g assertions
      2019-02-19 18:51:04 +0200 Assertion status system-wide: BackgroundTask 1 ApplePushServiceTask 0 UserIsActive 1 PreventUserIdleDisplaySleep 0 PreventSystemSleep 0 ExternalMedia 1 PreventUserIdleSystemSleep 0 NetworkClientActive 0 Listed by owning process: pid 56(powerd): [0x0000001700088000] 00:13:44 ExternalMedia named: "com.apple.powermanagement.externalmediamounted" pid 100(hidd): [0x00000025000980a7] 00:00:00 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968578.17" Timeout will fire in 600 secs Action=TimeoutActionRelease pid 200(mds_stores): [0x0000034e000b8279] 00:00:00 BackgroundTask named: "com.apple.metadata.mds_stores.power" Kernel Assertions: 0x4=USB id=502 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d130000 owner=USB Keyboard id=503 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d120000 owner=Lenovo Optical Mouse Idle sleep preventers: IODisplayWrangler  
      Specs:
      CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors
      RAM: 128 GB 1333 MHz DDR3 ECC Memory
      GPU: SAPPHIRE Radeon PULSE RX 580 8GB GDDR5
      Chipset: Intel C602
      Audio: Realtek ALC3220 (ALC280) High Definition Audio
      SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4  
      Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
      Network Controller 2: Intel Ethernet Controller I210 
      NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
       
      for more info:
       
      Any Help will be appreciated, Thanks !
       
      Send me Yehias-Mac-Pro.zip
    • By yehia2amer
      Dell Precision T7610 Workstation
      Hackintosh GUIDE (Work in Progress)
       
                        
      Introduction: 
      Hi Everyone,
      This Workstation used to be a Beast with Dual CPUs and tons of RAM, I Know it is now normal to get that much cores in a Desktop but it is still a very decent machine for me (As a Programmer), and I thought it would be a good idea to Install MacOS as the Daily Driver Rather than Linux and It turns out to be a very Great Experience (with Some Challenges ).
       
      Specs:
      CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors RAM: 128 GB 1333 MHz DDR3 ECC Memory GPU: SAPPHIRE PULSE Radeon RX 580 8GD5 Chipset: Intel C602 Audio: Realtek ALC3220 (ALC280) High Definition Audio SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4  Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
      Network Controller 2: Intel Ethernet Controller I210
      NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
       
      Working:
      Both "Xeon E5-2680 v2" and all cores with Power Management and P-States (using VoodooTSCSync & ssdtPRGen.sh) ATI Radeon HD 4870 (Vanilla) Realtek ALC3220 (ALC280)  (using VoodooHDA till Now - it is partially working with AppleALC using layout-id 13) LSI 2308 SAS (using AstekFusion2) Intel 82579 Network Controller (Vanilla) Intel I210 Network Controller (IntelMausiEthernet) USB 2.0  
      Not Working:
      NEC USB3.0 xHCI Controller (Renesas Electronics uPD720201 & uPD720202) Sleep  
      https://github.com/yehia2amer/Dell-Precision-T7610-Workstation-Hackintosh-Guide
    • By wen1
      Work in progress
       
      This is mini guide and config files for installing Mojave on a Dell XPS 13 9370.
       
      I took inspiration from sensibleJoe at on reddit
       
      My laptop's specs
       
      i7-8550U Intel HD 620 Graphics UHD Display 256GB Samsung NVMe SSD PM961 Killer 1435 Wifi  
      Here is what works
       
      Intel HD Graphics  Sleep Sound & Mic USB Wifi (Internal Killer Wifi will not work) Bluetooth Power Management Battery Management Screen Brightness Control  
      What does not work
       
      Internal Wifi Camera SD Card reader  
       
       
      I followed the vanilla guide here to create the Mac OS Mojave install USB. I used Mac OS 10.14.3.
       
      Here are some rough steps
       
      1. Create the USB installer for Mojave. You can use apple's own instructions
      2. Once the installer USB creation is complete, Install the latest version of clover to the USB disk with the following options 
      Install Clover for UEFI booting only
      Install Clover to the ESP
       
      Leave everything else as default (minimal install without a bunch of drivers)
       
      3. Then mount the EFI folder on the USB drive and replace the files in the config folder with the ones from the attached zip file over writing the files already there. This config is specifically for Dell XPS 13 9370.
      4. Go into the UEFI/BIOS on the laptop, Make sure your SATA mode is set to AHCI (And not Raid). Save and Exit
      5. Boot with the USB disk and install Mojave
      6. After the install is complete, Use the USB to boot again but this time boot into the newly installed Mojave partition.
      7. Install Clover on to the SSD with the same options as before.
      8. Then copy the config files to the EFI folder on the SSD overwriting the config folder there.
      9. Acquire the backlight AppleBacklightFixup.kext from here and install to /Library/Extensions (Thanks to Rehabman for the kext)
      10. Reboot.
       
      EDIT: V4 fixes many things, like powermanagement, backlight control etc. you also need to install AppleBacklightFixup.kext to /Library/Extensions
       
       
      CLOVER-v4.zip
×