Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,340 posts in this topic

Recommended Posts

Hi MaLd0n, can you help me with my Clover Config of my desktops? thanks a lot...

GIGA.zip

MSI.zip

I'm sorry to ask you to keep asking. I replaced the graphics card and the computer broke down.

I bought a new computer presumptively. T.T

Can you help me, One more..I wish this was the last time I saw you.

I'm so sorry.

My System 

OS : Sierra 10.12.6 

CPU : Intel i5-6600

M/B : Asus B150M-A/m.2

Graphic : inno3D GTX 560 Ti

Storage :

Sandisk 120gb ssd

2X hdd

1X ODD

Lan : Realtek 8111

Sound : Alc887

 

and have m.2 slot

CLOVER.zip

Share this post


Link to post
Share on other sites
Advertisement

@MaLd0n

hi hope you can help me I have uploaded all the files you want my hardware config is in my Signature and its up to date.

Its for my desktop.

Thanks.

attachicon.gifCLOVER.zip

attachicon.giffaradis’s iMac.ioreg.zip

attachicon.gifSend me faradis’s iMac.zip

CLOVER.zip

I am going to purchase nvme soon. Don't you need any more patches?

maybe I am gonna purchase Samsung 960 evo.

 

and.Don't I need the ssdt file anymore?

in high sierra samsungs work native, sierra no, need patches

dont need ssdts

Thanks, all works like charm!!!

welcome

enjoy

Share this post


Link to post
Share on other sites

For high sierra use -alcbeta

for lilu.kext 1.1.6 --> -lilubeta is deprecated

 

Thank you.

 

If I do not have the -igfxbeta, when the macOS High Sierra is loading, a blinking appears as shown in the picture.

 

Can this be hidden?

 

 

I have lilu.kext 1.1.6

 

http://shrani.si/f/3...NeE1iA/igfx.jpg

Share this post


Link to post
Share on other sites

@MaLd0n

[IGPU] Will fallback to host-side scheduling if graphics firmware fails to load
[IGPU] Chose to use graphics firmware based on platform
[IGPU] ****************************************************************************
[IGPU] Failed to initialize graphics firmware. Falling back to host-side scheduling
[IGPU] Scheduler interface revision = 1: Default EL Scheduler
[IGPU] ****************************************************************************
[IGPU] Graphics accelerator is using scheduler interface revision 1: Default EL Scheduler
[IGPU] Scheduler: Multiple channel indexes per command streamer
[IGPU] Scheduler: Process CSB using HWS.
[IGPU] Scheduler: PM notify enabled
[IGPU] Graphics Address: PPGTT, Separate Address Space
[IGPU] MultiForceWake Enabled: Using 3D Driver
[IGPU] Scheduler Throttle Cap = 100ms

How to solve this

​also I have some ACPI error in my verbose log.how to solve those.

here is the both picture

post-793247-0-78679100-1502035649_thumb.jpg

post-793247-0-46430600-1502035665_thumb.jpg
 

Share this post


Link to post
Share on other sites

My System

OS : Sierra 10.12.6

CPU : Intel i5-6600

M/B : Asus B150M-A/m.2

Graphic : msi r9 280x twin frozr 4 3gd5/oc gaming

Storage :

Samsung 950 por M.2

Sandisk 120gb ssd

2X hdd

1X ODD

Lan : Realtek 8111

Sound : Alc887

Is it working well?

I don't think the backpanel is working properly.

Jangsangin의 iMac.zip

Send me Jangsangin의 iMac.zip

post-2143857-0-12214200-1502119384_thumb.png

CLOVER.zip

Share this post


Link to post
Share on other sites

Hey man, I have a laptop (Acer Aspire V3-731-4634)

in which i have succesfully installed MacOs Sierra, the problem comes to the fact that the chipset is series 7 (Mobile Intel HM77 Express) and the processor is Sandy Bridge (Intel Pentium B960) with Intel Hd graphics Sandy Bridge that is recognized as Intel hd graphics 3000 with no QE/CI.

 

is it possible to get QE/CI or not? Thanks.

 

 

Share this post


Link to post
Share on other sites

My System

OS : Sierra 10.12.6

CPU : Intel i5-6600

M/B : Asus B150M-A/m.2

Graphic : msi r9 280x twin frozr 4 3gd5/oc gaming

Storage :

Samsung 950 por M.2

Sandisk 120gb ssd

2X hdd

1X ODD

Lan : Realtek 8111

Sound : Alc887

 

Is it working well?

I don't think the backpanel is working properly.

You try inject your GraphicCard in DSDT?

This Work for me

-----------------------------------------------------------------------------------------

# Maintained by: PJALM (help@pjalm.com) for: http://pjalm.com/repos/

 
# These patches are the registered property of PJALM.COM and can not be
# redistributed or modified without the written consent of PJALM.COM.
# Links to these patches are allowed. All material is protected under the DMCA.
 
# Last Updated  : 05/07/2016
# Patch Name    : GFX - Generic Discrete Graphics (AMD/nVidia)
# Patch Version : 1.0
 
# Warning : This patch is ment for Series 6/7 systems only, no guarantees of use on other systems.
 
# Desktop AMD/nVidia Graphics + HDMI Audio
# Credit to Toleda for the graphics and audio fixes
 
into device label PEGP parent_label PEG0 remove_entry;
into device label PEG0 parent_label PCI0 set_label begin PEGP end;
 
into scope label _SB.PCI0.PEG0 set_label begin _SB.PCI0.PEGP end;
into scope label _SB.PCI0.PEG0 set_label begin _SB.PCI0.PEGP end;
into scope label _SB.PCI0.PEG0.PEGP set_label begin _SB.PCI0.PEGP.GFX0 end;
 
into method label _L09 parent_label _GPE code_regex (Notify\s\(\\_SB\.PCI0\.)PEG0(,\s0x[0-9A-F]{2}\)) replace_matched begin %1PEGP%2 end;
into method label _L09 parent_label _GPE code_regex (Notify\s\(\\_SB\.PCI0\.)PEG0.PEGP(,\s(0x[0-9A-F]{2})\)) replace_matched begin %1PEGP.GFX0%2 end;
into method label OL1X parent_label _GPE code_regex (Notify\s\(\\_SB\.PCI0\.)PEG0(,\sZero\)) replace_matched begin %1PEGP%2 end;
into method label _DSM parent_label GFX0 code_regex (If\s\(LEqual\s\(\^\^)PEG0\.PEGP(\.LNKV,\s0x[0-9A-F]{2}\)\)) replace_matched begin %1PEGP.GFX0%2 end;
into method label _DSM parent_label IGPU code_regex (If\s\(LEqual\s\(\^\^)PEG0\.PEGP(\.LNKV,\s0x[0-9A-F]{2}\)\)) replace_matched begin %1PEGP.GFX0%2 end;
 
# Insert device GFX0 (AMD/nVidia Graphics)
into device label GFX0 parent_label PEGP remove_entry;
into device label PEGP parent_label PCI0 insert begin
Device (GFX0)\n
{\n
Name (_ADR, Zero)\n
Name (_SUN, One)\n
Method (_DSM, 4, NotSerialized)\n
{\n
Store (Package (0x0E) {\n
"AAPL,slot-name", "Slot-1",\n
"name", "Display Controller",\n
"@0,connector-type", Buffer(0x04) {0x00,0x08,0x00,0x00},\n
"@1,connector-type", Buffer(0x04) {0x00,0x08,0x00,0x00},\n
"@2,connector-type", Buffer(0x04) {0x00,0x08,0x00,0x00},\n
"@3,connector-type", Buffer(0x04) {0x00,0x08,0x00,0x00},\n
"hda-gfx", Buffer (0x0A) {"onboard-2"}\n
}, Local0)\n
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n
Return (Local0)\n
}\n
}
end;
 
# Insert device HDAU (AMD/nVidia HDMI Audio)
into device label HDAU parent_label PEGP remove_entry;
into device label PEGP parent_label PCI0 insert begin
Device (HDAU)\n
{\n
Name (_ADR, One)\n
Method (_DSM, 4, NotSerialized)\n
{\n
Store (Package (0x02) {\n
"hda-gfx", Buffer (0x0A) {"onboard-2"}\n
}, Local0)\n
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n
Return (Local0)\n
}\n
}
end;
 
# Change HDEF layout-id for Intel HD audio
into method label _DSM parent_label HDEF code_regex ("layout-id",\s*Buffer\s+\(0x04\)\s*\{\s*)0x[0-9A-F]{2},\s*0x[0-9A-F]{2},\s*0x[0-9A-F]{2},\s*0x[0-9A-F]{2} replace_matched begin %10x01,0x00,0x00,0x00 end;

Share this post


Link to post
Share on other sites

Hey man, I have a laptop (Acer Aspire V3-731-4634)

in which i have succesfully installed MacOs Sierra, the problem comes to the fact that the chipset is series 7 (Mobile Intel HM77 Express) and the processor is Sandy Bridge (Intel Pentium B960) with Intel Hd graphics Sandy Bridge that is recognized as Intel hd graphics 3000 with no QE/CI.

 

is it possible to get QE/CI or not? Thanks.

You HD Graphics its no compatible with QE/CI, this Intel Pentium B960 is HD 2000 no HD3000

Share this post


Link to post
Share on other sites

My System

OS : Sierra 10.12.6

CPU : Intel i5-6600

M/B : Asus B150M-A/m.2

Graphic : msi r9 280x twin frozr 4 3gd5/oc gaming

Storage :

Samsung 950 por M.2

Sandisk 120gb ssd

2X hdd

1X ODD

Lan : Realtek 8111

Sound : Alc887

 

Is it working well?

I don't think the backpanel is working properly.

Use this path in your config.plist under Kext and Kernel Patches:

 

Name: AMD7000Controller

Find: 48442037 787878
Replace: 52392032383058
Comment:HD 7xxx to R9 280X
 
or
 
You can Lilu v.1.1.6 and Whatevergreen 1.1.3 kext files.

Share this post


Link to post
Share on other sites

Use this path in your config.plist under Kext and Kernel Patches:

 

Name: AMD7000Controller

Find: 48442037 787878

Replace: 52392032383058

Comment:HD 7xxx to R9 280X

 

or

 

You can Lilu v.1.1.6 and Whatevergreen 1.1.3 kext files.

thanks

 

나의 SM-N935S 의 Tapatalk에서 보냄

You try inject your GraphicCard in DSDT?

This Work for me

-----------------------------------------------------------------------------------------

# Maintained by: PJALM (help@pjalm.com) for: http://pjalm.com/repos/

 

# These patches are the registered property of PJALM.COM and can not be

# redistributed or modified without the written consent of PJALM.COM.

# Links to these patches are allowed. All material is protected under the DMCA.

 

# Last Updated : 05/07/2016

# Patch Name : GFX - Generic Discrete Graphics (AMD/nVidia)

# Patch Version : 1.0

 

# Warning : This patch is ment for Series 6/7 systems only, no guarantees of use on other systems.

 

# Desktop AMD/nVidia Graphics + HDMI Audio

# Credit to Toleda for the graphics and audio fixes

 

into device label PEGP parent_label PEG0 remove_entry;

into device label PEG0 parent_label PCI0 set_label begin PEGP end;

 

into scope label _SB.PCI0.PEG0 set_label begin _SB.PCI0.PEGP end;

into scope label _SB.PCI0.PEG0 set_label begin _SB.PCI0.PEGP end;

into scope label _SB.PCI0.PEG0.PEGP set_label begin _SB.PCI0.PEGP.GFX0 end;

 

into method label _L09 parent_label _GPE code_regex (Notify\s\(\\_SB\.PCI0\.)PEG0(,\s0x[0-9A-F]{2}\)) replace_matched begin %1PEGP%2 end;

into method label _L09 parent_label _GPE code_regex (Notify\s\(\\_SB\.PCI0\.)PEG0.PEGP(,\s(0x[0-9A-F]{2})\)) replace_matched begin %1PEGP.GFX0%2 end;

into method label OL1X parent_label _GPE code_regex (Notify\s\(\\_SB\.PCI0\.)PEG0(,\sZero\)) replace_matched begin %1PEGP%2 end;

into method label _DSM parent_label GFX0 code_regex (If\s\(LEqual\s\(\^\^)PEG0\.PEGP(\.LNKV,\s0x[0-9A-F]{2}\)\)) replace_matched begin %1PEGP.GFX0%2 end;

into method label _DSM parent_label IGPU code_regex (If\s\(LEqual\s\(\^\^)PEG0\.PEGP(\.LNKV,\s0x[0-9A-F]{2}\)\)) replace_matched begin %1PEGP.GFX0%2 end;

 

# Insert device GFX0 (AMD/nVidia Graphics)

into device label GFX0 parent_label PEGP remove_entry;

into device label PEGP parent_label PCI0 insert begin

Device (GFX0)\n

{\n

Name (_ADR, Zero)\n

Name (_SUN, One)\n

Method (_DSM, 4, NotSerialized)\n

{\n

Store (Package (0x0E) {\n

"AAPL,slot-name", "Slot-1",\n

"name", "Display Controller",\n

"@0,connector-type", Buffer(0x04) {0x00,0x08,0x00,0x00},\n

"@1,connector-type", Buffer(0x04) {0x00,0x08,0x00,0x00},\n

"@2,connector-type", Buffer(0x04) {0x00,0x08,0x00,0x00},\n

"@3,connector-type", Buffer(0x04) {0x00,0x08,0x00,0x00},\n

"hda-gfx", Buffer (0x0A) {"onboard-2"}\n

}, Local0)\n

DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n

Return (Local0)\n

}\n

}

end;

 

# Insert device HDAU (AMD/nVidia HDMI Audio)

into device label HDAU parent_label PEGP remove_entry;

into device label PEGP parent_label PCI0 insert begin

Device (HDAU)\n

{\n

Name (_ADR, One)\n

Method (_DSM, 4, NotSerialized)\n

{\n

Store (Package (0x02) {\n

"hda-gfx", Buffer (0x0A) {"onboard-2"}\n

}, Local0)\n

DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n

Return (Local0)\n

}\n

}

end;

 

# Change HDEF layout-id for Intel HD audio

into method label _DSM parent_label HDEF code_regex ("layout-id",\s*Buffer\s+\(0x04\)\s*\{\s*)0x[0-9A-F]{2},\s*0x[0-9A-F]{2},\s*0x[0-9A-F]{2},\s*0x[0-9A-F]{2} replace_matched begin %10x01,0x00,0x00,0x00 end;

thanks

 

나의 SM-N935S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

Question, If i have a 7 series chipset HM77, can I buy a sandy bridge core i3, or do i have to buy an ivy bridge core i3?

 

I have read that MacOs doesnt activate the graphics since normal Macs dont have hybrids ("OS X gets confused when you run a 2nd generation Core-i "Sandy Bridge" CPU on one of the newer 7-series motherboards instead of a 3rd generation Core-i "Ivy Bridge" CPU, and vice versa").

 

I just want to be sure what processor I need to buy, taking into account that sandy bridge i3 is cheaper than i3 ivy bridge.

Share this post


Link to post
Share on other sites

Hello MaLd0n, gengik84

I have a GA-z97-hd3 v2.1 with an intel i5 4690-k and an Nvidia 1050 ti SSC with 16 gb RAM ddr3 1600. Attached you will find my ioregistry file and two different clover settings that I have tried. My concern is that the booting process is taking more time than in the past after I tried both clover configurations. The clover.zip folder is booting after a while, the other one named clover 8-9-17.zip Im not sure is booting. The osx installation is 10.12.6 and is installed in a SSD devoted solely to osx. Could you check and share with me the best configuration which speed up the booting time.

 

Here is the other clover folder configuration I was referring to.


Here is the other clover folder configuration I was referring to.

CLOVER 8-9-17.zip

Jorge’s iMac.ioreg.zip

CLOVER.zip

Share this post


Link to post
Share on other sites

Question, If i have a 7 series chipset HM77, can I buy a sandy bridge core i3, or do i have to buy an ivy bridge core i3?

 

I have read that MacOs doesnt activate the graphics since normal Macs dont have hybrids ("OS X gets confused when you run a 2nd generation Core-i "Sandy Bridge" CPU on one of the newer 7-series motherboards instead of a 3rd generation Core-i "Ivy Bridge" CPU, and vice versa").

 

I just want to be sure what processor I need to buy, taking into account that sandy bridge i3 is cheaper than i3 ivy bridge.

sandy and ivy is lga 1155

Hello MaLd0n, gengik84

I have a GA-z97-hd3 v2.1 with an intel i5 4690-k and an Nvidia 1050 ti SSC with 16 gb RAM ddr3 1600. Attached you will find my ioregistry file and two different clover settings that I have tried. My concern is that the booting process is taking more time than in the past after I tried both clover configurations. The clover.zip folder is booting after a while, the other one named clover 8-9-17.zip Im not sure is booting. The osx installation is 10.12.6 and is installed in a SSD devoted solely to osx. Could you check and share with me the best configuration which speed up the booting time.

 

Here is the other clover folder configuration I was referring to.

Here is the other clover folder configuration I was referring to.

CLOVER.zip

Share this post


Link to post
Share on other sites

attachicon.gifCLOVER.zip

 

in high sierra samsungs work native, sierra no, need patches

dont need ssdts

 

welcome

enjoy

@MaLd0n

my mac goes to sleep fine but fails to wake up how can i debug that is there any way to find out which component is the main culprit for not coming back from sleep i am using clover folder provided by you

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By penghubingzhou
      VoodooI2C-DSDT is a repository that is aiming at collecting various successful DSDTs for Voodoo I2C.
      Purpose
      The purpose of this repository is to provide some useful code examples for people who haven't yet make Voodoo I2C work. Maybe It don't have your model of laptop, but code in this repository may have some help and references for you.
      Note that the code in this repository is ONLY FOR REFERENCES and it can‘t replace your own work!
      For Submission
      This repository welcomes everyone to submit DSDT code examples that have successfully made VoodooI2C work by PR. To submit your example, please put the DSDT file (or Hotpatch SSDT file), an ioreg without Voodoo I2C installed, and Info.txt in a folder named by your laptop model. Info.txt should include:
      Your CPU model (better for including CPU platform)
      Your touchpad Device ID
      The mode you use (GPIO interrupt or polling)
      Satellite Driver You Use
      Then, fork this repository and clone it, put your file in and commit it to your repository. After checking the conflicts, you can send your commit as a PR to me.
      An example for submitting can be found in Lenovo Xiaoxin Chao 7000-14.
      Credits
      @Alexandred for VoodooI2C @daggeryu for the idea in this repository @penghubingzhou and @williambj1 for maintaining
    • By rtke333
      Acer Aspire V15 V5-591G - Mojave 10.14.4
       
      (Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)
      Specifications:
      - Motherboard: USOPP_SLS (Skylake-H PCH)
      - BIOS:Insyde Corp. v 1.15
      - CPU:Intel Core i5-6300HQ 2.3 GHz (Skylake)
      - GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530
      - RAM:SK hynix 4 GB DDR4 (Later I bought + KINGSTON 4 GB) 2133 MHz
      - WiFi + Bluetooth:Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth)
      - Audio:Realtek HD Audio: ALC 255 
      - Ethernet: Realtek RTL8168/8111
      - Card Reader:Realtek USB 2.0 Card Reader (USB2.0-CRW)
      - Webcam:HD Webcam
      - HDD:TOSHIBA MQ01ACF032 320 GB HDD
      - SSD:SPCC M.2 230 GB SSD
      - Display:1366x768 (15.6", Matte)
      - Battery: 6 cell 56Wh / 5040mAh
      - Connectors: 
      1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) - Keyboard & Touchpad:Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard.
      Working:  
      - Wi-Fi (with BCM94352Z)
      - Bluetooth hand-off (With BCM94352Z)
      -Full Graphics enabled on HD 530: ig-platform-id: 0x191b0000 (HD 530 Mobile)
      - Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use "Rec. ITU-R BT. 709-5" Color Profile (System Pref. -> Displays -> Color)
      -HDMI & VGA Outputs: AppleGraphicsDevicePolicy.kext Clover patch
      - Audio (ALC 255):(Internal Speakers, Internal Microphone, Headphone jack with AppleALC, ALCPlugFix -> layout-id=17)
      - Ethernet Realtek 8168/8111: RealtekRTL8111.kext
      - App Store, Messages, FaceTime, Siri, iCloud(native)
      - Integrated webcam(native)
      - 3.0 USB (native)
      - Touchpad and Keyboard(ELAN501): Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn-> To fix this try Karabiner (VoodoPS2Controller.kext), - for gestures try SmartTouchpad drivers
      - Battery info:Install ACPIBatteryManager.kext with Kext Utility or other installer.
      - Sleep Mode
      - SSD with TRIM enabled (to enable trim, open Terminal and write "sudo trimforce enable")
      Not working:
      - Original Wi-Fi (Qualcomm Atheros QCNFA344A):  unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle.
      - NVIDIA GeForce GTX 950M: Optimus not supported.
      - Card Reader: Unsupported -> Can't really fix because I don't have any SD Card at the moment, maybe can be fixed by adding Prod & Ven IDs to AppleStorageDevices.kext, I never used it anyway. name: "USB2.0-CRW" Prod ID: "0x0129" Ven ID: "0x0bda  (Realtek Semiconductor Corp.)"
      For Wi-Fi:
      - 1st method:You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it
      -2nd and I think the best method:Replace your M.2 Qualcomm Card with a compatible BCM94352Zcard (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareData.kext, BrcmPatchRAM2.kext, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, they're all in my attached zip). You could buy this card from ebay, aliexpress, or amazon
       
      Issues:
      - None
      BIOS Settings:
      - BIOS version 1.15 (irrelevant)
      - Secure Boot: Disabled
      - Touchpad: Advanced
      - Boot mode:UEFI
      Getting ready for Installation:
      - Download the install zip (bootpack & postinstall): Click here -> acer_aspire_v591g_installfiles.zip
      Installation:
      - Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager)
      - Copy my Clover folder to the USB's EFI folder
      - Boot with the Installer USB
      - If you stuck in boot, reboot and in the Clover bootloader select "config_debug.cfg" -> you'll have more informations about the freeze
       
      Please open the README.rtf in my install zip for more informations about the USB Installer & Post installation!
      If you have a single RAM and getting panic at boot, then you need to edit the "config.plist" with these (SMBIOS->after "Version 1.0"):
      ->Edit "Frequency" and "Size" to match your RAM values
      <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict>  
      PowerManagement  fix:
      Set HWPEnable=YES in Clover (already set), CPUFloor to "700", Frequency to "2300" and "3200"(Normal and Turbo, if you have i7-6700HQ version then it should be "2600", "3500") and "FrequencyVectors" from "0x0d000000" to "0x07000000" in "S/L/E/IOPlatformPluginFamily.kext/Contents/PlugIns/X86PlatformPlugin.kext/Contents/Resources/Mac-A5C67F76ED83108C.plist", MSR _xcpm_idle Patch to KernelToPatch in Clover (If you have High Sierra, change "MatchOS" to 10.13):

      <key>KernelToPatch</key> <array> <dict> <key>Comment</key> <string>MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> ILniAAAADzA= </data> <key>MatchOS</key> <string>10.14</string> <key>Replace</key> <data> ILniAAAAkJA= </data> </dict> </array> Reboot, and it's 800MHz in idle state, same on Windows.
       

       
      Elan SmartTouchpad
      I only use scrolling, one-, double- & tripletap
      If you want to try other gestures go to this link for more informations, options (v4.7 beta 5) ->  DETAILS ABOUT THE SMART TOUCHPAD DRIVER FEATURES
      Fn Brightness keys not working with this, tried several things without success. With VoodoPS2Controller it's working, but you'll have no gestures (neither scrolling).
       
       
      Before updating to a new version of Mojave please update kexts (and clover if necessary) to newer versions to avoid kernel panics.
      Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New)
       
      Mojave & Windows 10 Dual-Boot:
      Dual-boot clean install (on one drive), UEFI Only:
       
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac),   Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart,  Boot into your Win installer, Format the partition you created for Win, install.   Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       5.  You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      Dual-boot with Windows installed first (on one drive), UEFI Only:
      If you already have Windows and you don't want to lose all your data there is a hope:
      I created a video from this restore method: [Hackintosh] Dual-Boot High Sierra & Windows - when Windows already installed - no data waste - UEFI
      You need bootable Mac Installer and a full system restore image (link is in my video's description).
      (You may see errors if your EFI partition is not 200 MB)
       Boot into your Windows, resize your partition or create one for Mac.  Boot into your Mac installer and in Disk Utility format the partition you created.  Restore from image: select your full system restore image.  When it's finished restoring you just need to restart, then boot to the system with your usb.  When you successfully booted to Mac desktop, mount your EFI partition (use terminal or an EFI mounter app), open EFI, you will see there is a Microsoft folder already (don't touch that!). Copy my CLOVER folder to the EFI folder then Restart.  Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       7.  You're done! You can select your old Windows and your new macOS!
      (Only tried with Windows 8/8.1/10. I don't know Windows 7,etc.)
       
      IF YOU GETTING ERRORS DURING MAC RESTORE:
      - Make sure you have partitions in GPT
      - Windows using 100 MB EFI and will annoy the Mac restore. Don't worry, just ignore the errors.
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      - Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)
       
      IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found):
      - It's because your EFI is not 200 MB or not an "Apple" original EFI,  but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem)
      - You also could "mount" the EFI from Windows:
      1st method: open cmd in administrator mode and type:
      diskpart
      list vol (Now select the "System" volume,(FAT 32) For example I select 4)
      sel vol 4
      list part(Select System type partition, for example 2)
      sel part 2
      assign letter=b(This will "mount" your EFI partition)
      Open Explorer++ or TotalCommander in administrator mode to manage EFI
      remove letter=b (This will "unmount" your EFI)
      2nd method: open cmd in administrator mode and type:
      mountvol b: /s (This will mount your EFI)
      Open Explorer++ or TotalCommander in administrator mode to manage EFI
      mountvol b: /d (This will unmount your EFI)
      Thanks to all OSXLatitude members for helping me out! (Jake Lo, Hervé, Bronxteck, black.dragon74)!
      Notes:
      2019.04.25: Optimized touchpad scrolling -> updated install files
      2019.03.30: Fixed USB 3.0 ports, fixed Bluetooth crashes after sleep -> updated bootpack
      2019.03.28: Updated to 10.14.4. Unexpected crashes while updating to 10.14.4 -> fixed by updating Clover to the latest (v4910) version. Bluetooth crashes appeared -> fixed by downgraded Brcm*.kexts. Updated bootpack.
      2019.02.24: Bluetooth crashes after sleep -> fixed, updated bootpack. 
      2019.02.22: Updated to 10.14.3. Fixed HDMI Audio by installing "FakePCIID_Intel_HDMI_Audio.kext" -> fixed freezing during boot. Fixed brightness levels by installing "AppleBacklightFixup.kext". Also updated bootpack & postinstall zip down in attachments.
      2019.01.21: Removed FakeSMC.kext, SMCHelper-64.efi, replaced by VirtualSMC.kext, VirtualSMC.efi because I got random freezes when booting system (kextd stall[0], (120s): 'AppleACPICPU' -> CPU is at 100%, fans are spinning fast), also updated bootpack in the attachments "acer_aspire_v591g-55tu_clover.zip"-> Freeze continued, brought back FakeSMC, deleted VirtualSMC (caused BT crashes).
      2019.01.18: HDMI Audio is fixed, I didn't do anything HDMI Audio is not fixed, sometimes it worked but most likely not. (no idea why)
      2018.12.09: Updated to 10.14.2 -> did without any complication
      2018.11.28: Fixed combo-jack garbage sound output by installing ALCPlugFix and CodecCommander.kext
      2018.11.01: Updated to 10.14.1 -> HDMI & VGA ports are gone again. -> Fixed by "AppleIntelSKLGraphicsFramebuffer.kext" rollback from 10.14.
      2018.09.28: Updated to Mojave 10.14 -> Fixed HDMI & VGA Outputs by adding "AppleGraphicsDevicePolicy.kext" patches to config.plist, HDMI audio not working
    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?p=77102#p77102
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By fighttoby
      I have tried to install clover via no UEFI legacy mode (and with UEFI method) using the method here (http://www.tonymacx86.com/yosemite-desktop-guides/144426-how-install-os-x-yosemite-using-clover.html)
      both times I can get to just past the clover boot screen and it freezes after that.
      I have verbose (-v) selected in boot options: On the non-UEFI install then it hangs on:
      "Waiting on <dict ID="0"><key>IOProviderClass</key>...."
       
      I have had a lot of issues with trying to get the installer working and many different things that had to be disabled but now it just gets to here and stops. Some times it will glitch out on this screen and give me a the circle with the line through it and text garbage around it where the text in the pictures are.
       
      Need help please.
       
      This is the laptop im using the specs are the same nothing has changed.
      https://www.asus.com/Laptops/ASUS_VivoBook_X202E/


      config.plist
×