Jump to content
  1. MaLd0n

    MaLd0n

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By necros
      Hi all, new user here.
      I followed the shilohh guide i7-4930k-asus-rampage-iv-extreme-32gb-ram-gtx-770-4gb-success(and some other guides fresh installing) and everything works great but my cpu is flat at 1.2Mhz. 
      I tried every guide here, in olarila and in "others" but nothing works. Surely I'm doing something wrong but I cannot guess what it is. Also tried nullcpu etc..
      My specs are:
      Rampage IV Extreme
      i7 3930k
      Gtx 980
      Mac OS X 10.12.6
      I made my own SSDT too.
      C1E is enabled.
      I leave my Clover Folder here in case someone can shed some light because I'm starting to be desperate.
      Thank you in advance
      Cheers
       
      CLOVER.zip
    • By jackluke
      Those who use Mojave with an OpenGL (non-Metal) Video Card in "dark mode" have noticed that global transparencies are working fine, while in "light mode" encountered the "grey" Finder menu bar and sidebars issues, this patch is intended for those who want to use Mojave mainly in "light mode" saving some transparencies around, so here is my "hybrid reduce transparency" patch.
       
      It is totally safe, harmless and reversible, it has been deeply tested and will 100% work until restart or logout, even after sleep lock screen it will still work.
      To return with normal "transparency" you can also do that from Accessibility prefpane disabling the "reduce transparency" checkbox.
      To use this patch just double click on this attached shell "mojavehld.command" and it will launch through Terminal.

      [METHOD 1: Enable hybrid transparency]
      After launch the mojavehld.command just follow these steps:
      type 1
      type 4
      close Terminal (CMD+Q) and any other app previously opened.

      (The choice number 3 is not mandatory)

      [METHOD 2: Force hybrid transparency]
      If for some reason after that you will still get Dock and Notification Center without "transparencies" then relaunch the mojavehld.command:
      type 2
      type 1
      type 4
      close Terminal (CMD+Q) and any other app previously opened.
       
      Download attached here: mojavehld.zip
       





    • By headkaze
      Framebuffer patching in Mojave
      Binary patching framebuffers using KextsToPatch in Clover is no longer a viable method in Mojave for Skylake and above. Now you need to use Lilu + WhateverGreen.
       
      Not just for Mojave
      This method of framebuffer patching is not only required for Mojave we recommend it for all previous and future releases of macOS.
       
      Coffee Lake Users
      Please note that the new WhateverGreen will not work with fake Kaby Lake platform-id's. You will need to have either macOS 10.14 Beta 4 (18A336e) or macOS High Sierra 10.13.6 (17G2112). The latter is a special build only available to MacBookPro15,1 or MacBookPro15,2 board id's. You can create a macOS High Sierra 10.13.6 (17G2112) installer by running installinstallmacos.py. (Update: vit9696 added back ability to fake Kaby Lake platform-id's)
       
      Lilu + WhateverGreen
      WhateverGreen is going to replace all the other video patching plugins for Lilu (it currently has merged WhateverGreen, IntelGraphicsFixup, NvidiaGraphicsFixup, Shiki and CoreDisplayFixup). Others will likely follow (such as AppleALC, HibernationFixup and IntelGraphicsDVMTFixup). This is aiming to be the all-in-one solution for video.
       
      Beta Warning
      Please note that it is currently in a "beta" state so use it at your own risk. I am just documenting this here for those of you who want to get framebuffer patching now.
       
      Preliminary
      1. Remove:
      - FakePCIID_Intel_HD_Graphics
      - IntelGraphicsFixup
      - NvidiaGraphicsFixup
      - CoreDisplayFixup
      - Shiki
      2. Turn off all graphics injections in Clover:
      - config.plist/Graphics/Inject/ATI=NO
      - config.plist/Graphics/Inject/Intel=NO
      - config.plist/Graphics/Inject/NVidia=NO
      - config.plist/Graphics/ig-platform-id=
      - config.plist/Devices/FakeID/IntelGFX=

      3. Disable DSDT Clover fixes:
      - AddHDMI
      - FixDisplay
      - FixIntelGfx
      - AddIMEI
      4. Disable UseIntelHDMI
      5. Remove boot argument: -disablegfxfirmware
      6. Remove any IGPU and HDMI entries from:
      - config.plist/Devices/Arbitrary
      - config.plist/Devices/Properties
      - config.plist/Devices/AddProperties
      7. Remove any IGPU and HDMI related SSDT and DSDT from:
      - CLOVER/ACPI/patched
      8. Renaming GFX0 -> IGPU
      - WhateverGreen will do this automatically
      - You may need to include Clover GFX0 -> IGPU rename for other kexts or ACPI patching that require it
       
      Compile Lilu + WhateverGreen
      Download WhateverGreen. Make sure you place the debug version of Lilu into the root of WhateverGreen before you compile. Install Lilu and WhateverGreen kext's into the usual place. Compile WhateverGreen as debug if you want to view debug output.
       
      Having trouble compiling?
      If you're having trouble compiling you can wait for the official binaries or download my (unsupported) build_lilu.sh shell script and run it in a folder to download and build Lilu + WhateverGreen using Xcode automatically. I recommend you try the debug versions first (place them into Clover's EFI/Clover/kexts/Other folder).
       
      Get the device path of your IGPU:
      Download and use the gfxutil tool like so:
      $ ./gfxutil -f IGPU DevicePath = PciRoot(0x0)/Pci(0x2,0x0) ig-platform-id
      For the AAPL,ig-platform-id (AAPL,snb-platform-id for Sandy Bridge) entry Clover requires this value to be in Data format so you need to reverse the bytes. So if you want your platform-id to be 0x3EA50009 first reverse the bytes (0900A53E) then use Xcode's plist editor to add the values to Clover's config.plist.

       
      What ig-platform-id should I use for my system?
      You should choose one that is the closest match to your system. I recommend you do some research on this before choosing one. See post #2 for available options. More info can be found here.
       
      You can determine the generation of your CPU by the first digit after the hyphen.
      Examples:
      - Intel(R) Core(TM) i5-2760QM (Gen 2)
      - Intel(R) Core(TM) i7-5257U CPU @ 2.70GHz (Gen 5)
      - Intel(R) Core(TM) m3-6Y30 (Gen 6)
      - Intel(R) Core(TM) i5-8350U (Gen 8)
       
      Here are some recommended frames:
       
      Gen 2: Sandy Bridge (Intel HD Graphics 2000/3000)
      - Support started with OS X 10.7.x and ended with macOS 10.13.6
      - Metal support is not available
      - Desktop: 0x00030010 (default)
      - Laptop: 0x00010000 (default)
       
      Gen 3: Ivy Bridge (Intel HD Graphics 2500/4000)
      - Support started with OS X 10.8.x
      - Desktop: 0x0166000A (default), 0x01620005
      - Laptop: 0x01660003 (default), 0x01660009, 0x01660004
       
      Gen 4: Haswell (Intel HD Graphics 4200-5200)
      - Support started with OS X 10.9.x
      - Desktop: 0x0D220003 (default)
      - Laptop: 0x0A160000 (default), 0x0A260005 (recommended)
       
      Gen 5: Broadwell (Intel HD Graphics 5300-6300)
      - Support started with OS X 10.10.2
      - Desktop: 0x16220007 (default)
      - Laptop: 0x16260006 (default)
       
      Gen 6: Skylake (Intel HD Graphics 510-580)
      - Support started with OS X 10.11.4
      - Desktop: 0x19120000 (default)
      - Laptop: 0x19160000 (default)
       
      Gen 7: Kaby Lake (Intel HD Graphics 610-650)
      - Support started with macOS 10.12.6
      - Desktop: 0x59160000 (default)
      - Laptop: 0x591B0000 (default)
       
      Gen 8: Coffee Lake (Intel UHD Graphics 630)
      - Support started with macOS 10.13.6 (17G2112) / 10.14 beta 4 (18A336e)
      - Desktop: 0x3EA50000 (default), 0x3E9B0007 (recommended)
      - Laptop: 0x3EA50009 (default)
       
      Framebuffer Patching
      WhateverGreen does most of the work automatically for you and in most cases you do not need any extra Framebuffer Patching. At the minimum though you should choose an ig-platform-id suitable for your system and place it in config.plist/Devices/Properties like this:

      Here are some reasons why you might need extra Framebuffer Patching:
      - Setting DVMT for those who can't set it above 32 MB in BIOS (framebuffer-stolenmem / framebuffer-fbmem)
      - Setting higher VRAM (framebuffer-unifiedmem)
      - Disabling eGPU (disable-external-gpu)
      - Enable pixel clock patch for 4K support (enable-hdmi20)
      - Disabling connectors to enable sleep (framebuffer-pipecount / framebuffer-portcount / framebuffer-conX-type=-1)
      - Removing CNConnectorAlwaysConnected flag for eDP laptop screens on < 10.13.6 (framebuffer-con0-flags=0x00000090)
      - Changing connector types to match your systems ports (framebuffer-conX-type)
       
      Framebuffer Patching Types
      We have three different types of patches:
       
      1. Arbitrary (Recommended)
      framebuffer-patch-enable (required to enable below) framebuffer-framebufferid (optional; defaults to current platform-id) (all below are optional) framebuffer-mobile framebuffer-pipecount framebuffer-portcount framebuffer-memorycount framebuffer-stolenmem framebuffer-fbmem framebuffer-unifiedmem framebuffer-conX-enable (required to enable below) framebuffer-conX-index framebuffer-conX-busid framebuffer-conX-pipe framebuffer-conX-type framebuffer-conX-flags 2. All Data
      framebuffer-conX-enable (required to enable below) framebuffer-conX-alldata 3. Find / Replace
      framebuffer-patchX-enable (required to enable below) framebuffer-patchX-framebufferid (optional; defaults to current platform-id) framebuffer-patchX-find framebuffer-patchX-replace framebuffer-patchX-count (optional; defaults to 1) You should place your patches in config.plist/Devices/Properties in Clover config.plist.
       
      Here are some example patches:
      - 32MB BIOS, 19MB stolen (framebuffer) 9MB fbmem (cursor) 2048MB unifiedmem (vram)

       
      - Pipe / Port Count 3 to 2
      - Connector 1 DP to HDMI
      - Connector 2 Disable

       
      Here is an example of the All Data method:

       
      Here is an example of the Find / Replace method:

       
      Debugging
      If you need a dump of your framebuffers in binary use the boot flag -igfxdump. The output will be in /AppleIntelFramebuffer_GEN_KERNX_Y on your boot drive (Eg. AppleIntelFramebuffer_10_17.7). Intel FB-Patcher can File->Open this and generate a config.plist/Devices/Properties patch for Clover. 010 Editor can also parse this file using the IntelFramebuffer.bt template.
      To get debug output from Lilu use the -liludbgall flag and for WhateverGreen use the -wegdbg boot flag. You will need to compile Lilu and WhateverGreen as debug for both of these flags to work.
       
      To view debug paste the following into Terminal (weglog.txt will output to your home directory):
      log show --predicate 'process == "kernel" AND (eventMessage CONTAINS "WhateverGreen" OR eventMessage CONTAINS "Lilu")' --style syslog --source --last boot >weglog.txt
      Credits
      - vit9696 and lvs1974 for WhateverGreen (Full Credits) and Lilu (Full Credits)
      - Andrey1970 for his guide on applelife.ru
      - RehabMan for All Data patching method
       


    • By chebkhaled1960
      Hello everyone 
      i noticed that when you install MacOS Mojave the format of HDD is converted to APFS automatically even if you formatted the HDD with HFS ! 
       
      My question is: i read that APFS is especially for SSD and not HDD, is APFS will damage my HDD or it’s Ok if I used it ?
       
      i need your helps and thank you .
×