Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on Intel 5, 6, 7, 8, 9 and x99 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

1,735 posts in this topic

Recommended Posts

23 minutes ago, Balamut said:

@MaLd0n


Thanks man you're the best, any suggestion on turning dsdt into SSDT or no point? Also anyone can suggest why the system restarts from sleep? Sleep worked like a charm on 10.12.

 

 

have a many many patches, for create all ssdt...not a good idea, need rename many devices for inject new with ssdt, etc

u use a brumbaer kext for good PStates?

28 minutes ago, apav said:

Actually I spoke just a little too soon- it's a very minor detail  I just noticed: sleep is working well however usb keyboard and mouse will not wake up when pressing mouse or keyboard - I need to press the power button which then wakes it out of sleep and everything (usb and sound)working when waking up.  Honestly I can live with it as if it is a problem to fix or if it will comprise anything you've done so far. 

Thanks again,

 

-apav

yes, in ur case i kill wake from usb to avoid problem

Share this post


Link to post
Share on other sites
Advertisement
Just now, MaLd0n said:

have a many many patches, for create all ssdt...not a good idea, need rename many devices for inject new with ssdt, etc

u use a brumbaer kext for good PStates?

Nope, just a Kernel XCPM patch in Clover and xcpm_assert_perf_max. using iMacPro1,1 on 10.13.3, will do a fresh install of .4 tonight.

AppleIntelInfo.kext v2.3 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x573d07de351 (272 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel(R) Xeon(R) CPU E5-2696 v4 @ 2.20GHz

Processor Signature..................... : 0x406F1
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 1
 - Model................................ : 0x4F (79)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0x16
------------------------------------------
 - Core Count........................... : 16
 - Thread Count......................... : 32

MSR_PLATFORM_INFO................(0xCE)  : 0x20080C3BF2811600
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x16 (2200 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 12
 - Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E010005
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 0 (not enabled)
 - CFG Lock............................. : 0 (MSR not locked)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x10414
------------------------------------------
 - LVL_2 Base Address................... : 0x414
 - C-state Range........................ : 1 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x4E89310649
IA32_APERF.......................(0xE8)  : 0x5C9DC07B63
MSR_0x150........................(0x150) : 0x0

MSR_FLEX_RATIO...................(0x194) : 0x0
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x24D700002000
------------------------------------------
 - Current Performance State Value...... : 0x2000 (3200 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0xFF00
------------------------------------------
 - Target performance State Value....... : 0xFF00 (25500 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x0

IA32_THERM_STATUS................(0x19C) : 0x88410000
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 0
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 65
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x550200
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 85
 - TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x402100
------------------------------------------
 - EIST Hardware Coordination........... : 0 (hardware coordination enabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x1E1F202122232525
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 25 (3700 MHz) 
 - Maximum Ratio Limit for C02.......... : 25 (3700 MHz) 
 - Maximum Ratio Limit for C03.......... : 23 (3500 MHz) 
 - Maximum Ratio Limit for C04.......... : 22 (3400 MHz) 
 - Maximum Ratio Limit for C05.......... : 21 (3300 MHz) 
 - Maximum Ratio Limit for C06.......... : 20 (3200 MHz) 
 - Maximum Ratio Limit for C07.......... : 1F (3100 MHz) 
 - Maximum Ratio Limit for C08.......... : 1E (3000 MHz) 

MSR_TURBO_RATIO_LIMIT1...........(0x1AE) : 0x1C1C1C1C1C1C1C1D
------------------------------------------
 - Maximum Ratio Limit for C09.......... : 1D (2900 MHz) 
 - Maximum Ratio Limit for C10.......... : 1C (2800 MHz) 
 - Maximum Ratio Limit for C11.......... : 1C (2800 MHz) 
 - Maximum Ratio Limit for C12.......... : 1C (2800 MHz) 
 - Maximum Ratio Limit for C13.......... : 1C (2800 MHz) 
 - Maximum Ratio Limit for C14.......... : 1C (2800 MHz) 
 - Maximum Ratio Limit for C15.......... : 1C (2800 MHz) 
 - Maximum Ratio Limit for C16.......... : 1C (2800 MHz) 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
 - Power Policy Preference...............: 1 (highest performance)

MSR_POWER_CTL....................(0x1FC) : 0x2B04005B
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x785A0001584B0
------------------------------------------
 - Package Power Limit #1............... : 150 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
 - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
 - Package Power Limit #2............... : 180 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
 - Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x15FB1033
------------------------------------------
 - Total Energy Consumed................ : 22508 Joules (Watt = Joules / seconds)

MSR_PKGC3_IRTL...................(0x60a) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xDB18BD099E
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1040D1E
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xDB18BD099E
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1040D1E
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x1387298820A

IA32_TSC_DEADLINE................(0x6E0) : 0x573D3E756D5

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 22 (2200 MHz)
Maximum Turbo Ratio/Frequency............: 37 (3700 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (12) 25 ]
CPU C3-Cores [ 1 2 3 4 6 10 12 14 15 16 18 20 22 24 26 27 28 30 ]
CPU C6-Cores [ 1 2 4 5 6 7 8 11 13 14 15 17 18 22 23 24 25 27 28 30 ]
CPU P-States [ 12 25 27 (34) ]
CPU C3-Cores [ 0 1 2 3 4 6 7 8 10 11 12 13 14 15 16 17 18 20 22 23 24 26 27 28 30 ]
CPU C6-Cores [ 0 1 2 4 5 6 7 8 11 12 13 14 15 16 17 18 19 20 22 23 24 25 27 28 29 30 ]
CPU P-States [ 12 25 27 32 34 (37) ]
CPU C3-Cores [ 0 1 2 3 4 6 7 8 9 10 11 12 13 14 15 16 17 18 20 21 22 23 24 26 27 28 29 30 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 23 24 25 26 27 28 29 30 31 ]
CPU P-States [ (12) 25 27 30 32 34 37 ]
CPU C3-Cores [ 0 1 2 3 4 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 28 29 30 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 28 29 30 31 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 ]
CPU P-States [ (12) 25 26 27 30 32 34 37 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 ]
CPU P-States [ 12 25 26 27 29 30 32 34 (35) 37 ]
CPU P-States [ 12 25 26 27 29 30 32 (33) 34 35 37 ]
CPU P-States [ (12) 25 26 27 28 29 30 32 33 34 35 37 ]
CPU P-States [ 12 25 26 27 28 29 30 31 32 33 34 35 (37) ]
CPU P-States [ 12 (21) 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 21 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 18 21 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 18 20 21 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ 12 (13) 18 20 21 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 13 14 18 20 21 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 13 14 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 13 14 16 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ 12 13 14 16 (17) 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 13 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]

 

 

Share this post


Link to post
Share on other sites
5 minutes ago, Balamut said:

Nope, just a Kernel XCPM patch in Clover and xcpm_assert_perf_max. using iMacPro1,1 on 10.13.3, will do a fresh install of .4 tonight.


AppleIntelInfo.kext v2.3 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x573d07de351 (272 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel(R) Xeon(R) CPU E5-2696 v4 @ 2.20GHz

Processor Signature..................... : 0x406F1
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 1
 - Model................................ : 0x4F (79)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0x16
------------------------------------------
 - Core Count........................... : 16
 - Thread Count......................... : 32

MSR_PLATFORM_INFO................(0xCE)  : 0x20080C3BF2811600
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x16 (2200 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 12
 - Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E010005
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 0 (not enabled)
 - CFG Lock............................. : 0 (MSR not locked)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x10414
------------------------------------------
 - LVL_2 Base Address................... : 0x414
 - C-state Range........................ : 1 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x4E89310649
IA32_APERF.......................(0xE8)  : 0x5C9DC07B63
MSR_0x150........................(0x150) : 0x0

MSR_FLEX_RATIO...................(0x194) : 0x0
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x24D700002000
------------------------------------------
 - Current Performance State Value...... : 0x2000 (3200 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0xFF00
------------------------------------------
 - Target performance State Value....... : 0xFF00 (25500 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x0

IA32_THERM_STATUS................(0x19C) : 0x88410000
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 0
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 65
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x550200
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 85
 - TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x402100
------------------------------------------
 - EIST Hardware Coordination........... : 0 (hardware coordination enabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x1E1F202122232525
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 25 (3700 MHz) 
 - Maximum Ratio Limit for C02.......... : 25 (3700 MHz) 
 - Maximum Ratio Limit for C03.......... : 23 (3500 MHz) 
 - Maximum Ratio Limit for C04.......... : 22 (3400 MHz) 
 - Maximum Ratio Limit for C05.......... : 21 (3300 MHz) 
 - Maximum Ratio Limit for C06.......... : 20 (3200 MHz) 
 - Maximum Ratio Limit for C07.......... : 1F (3100 MHz) 
 - Maximum Ratio Limit for C08.......... : 1E (3000 MHz) 

MSR_TURBO_RATIO_LIMIT1...........(0x1AE) : 0x1C1C1C1C1C1C1C1D
------------------------------------------
 - Maximum Ratio Limit for C09.......... : 1D (2900 MHz) 
 - Maximum Ratio Limit for C10.......... : 1C (2800 MHz) 
 - Maximum Ratio Limit for C11.......... : 1C (2800 MHz) 
 - Maximum Ratio Limit for C12.......... : 1C (2800 MHz) 
 - Maximum Ratio Limit for C13.......... : 1C (2800 MHz) 
 - Maximum Ratio Limit for C14.......... : 1C (2800 MHz) 
 - Maximum Ratio Limit for C15.......... : 1C (2800 MHz) 
 - Maximum Ratio Limit for C16.......... : 1C (2800 MHz) 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
 - Power Policy Preference...............: 1 (highest performance)

MSR_POWER_CTL....................(0x1FC) : 0x2B04005B
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x785A0001584B0
------------------------------------------
 - Package Power Limit #1............... : 150 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
 - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
 - Package Power Limit #2............... : 180 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
 - Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x15FB1033
------------------------------------------
 - Total Energy Consumed................ : 22508 Joules (Watt = Joules / seconds)

MSR_PKGC3_IRTL...................(0x60a) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xDB18BD099E
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1040D1E
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xDB18BD099E
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1040D1E
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x1387298820A

IA32_TSC_DEADLINE................(0x6E0) : 0x573D3E756D5

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 22 (2200 MHz)
Maximum Turbo Ratio/Frequency............: 37 (3700 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (12) 25 ]
CPU C3-Cores [ 1 2 3 4 6 10 12 14 15 16 18 20 22 24 26 27 28 30 ]
CPU C6-Cores [ 1 2 4 5 6 7 8 11 13 14 15 17 18 22 23 24 25 27 28 30 ]
CPU P-States [ 12 25 27 (34) ]
CPU C3-Cores [ 0 1 2 3 4 6 7 8 10 11 12 13 14 15 16 17 18 20 22 23 24 26 27 28 30 ]
CPU C6-Cores [ 0 1 2 4 5 6 7 8 11 12 13 14 15 16 17 18 19 20 22 23 24 25 27 28 29 30 ]
CPU P-States [ 12 25 27 32 34 (37) ]
CPU C3-Cores [ 0 1 2 3 4 6 7 8 9 10 11 12 13 14 15 16 17 18 20 21 22 23 24 26 27 28 29 30 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 23 24 25 26 27 28 29 30 31 ]
CPU P-States [ (12) 25 27 30 32 34 37 ]
CPU C3-Cores [ 0 1 2 3 4 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 28 29 30 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 28 29 30 31 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 ]
CPU P-States [ (12) 25 26 27 30 32 34 37 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 ]
CPU P-States [ 12 25 26 27 29 30 32 34 (35) 37 ]
CPU P-States [ 12 25 26 27 29 30 32 (33) 34 35 37 ]
CPU P-States [ (12) 25 26 27 28 29 30 32 33 34 35 37 ]
CPU P-States [ 12 25 26 27 28 29 30 31 32 33 34 35 (37) ]
CPU P-States [ 12 (21) 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 21 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 18 21 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 18 20 21 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ 12 (13) 18 20 21 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 13 14 18 20 21 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 13 14 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 13 14 16 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ 12 13 14 16 (17) 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 13 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 ]

 

 

select this option and let me know if work or not

 

MaLd0n 2018-04-03 às 20.25.16.png

Share this post


Link to post
Share on other sites

@MaLd0n

 

Didn't work, sleeps like a baby wakes up and reboot. Also the the APFS.efi that you had in the Clover folder that you did for me had issues, black screen and freeze(not complaining, just an observation), found a another one for 10.13.4 lags a bit but works.

Share this post


Link to post
Share on other sites
17 minutes ago, Balamut said:

@MaLd0n

 

Didn't work, sleeps like a baby wakes up and reboot. Also the the APFS.efi that you had in the Clover folder that you did for me had issues, black screen and freeze(not complaining, just an observation), found a another one for 10.13.4 lags a bit but works.

is the last apfs from 10.13.4 final

Share this post


Link to post
Share on other sites

Hi mald0n
I creating boot able usb 10.3.4 via diskmakerx but cant see installer on clover boot screen

Sent from my GT-I9195 using Tapatalk

Share this post


Link to post
Share on other sites
2 hours ago, MaLd0n said:

have a many many patches, for create all ssdt...not a good idea, need rename many devices for inject new with ssdt, etc

u use a brumbaer kext for good PStates?

yes, in ur case i kill wake from usb to avoid problem

Hi MaLd0n,

ok, understood - I can live with that.  I just noticed that WakeOnLAN is also not working.  I tried with it both on and off in bios.  It was working well before.  Is there any way to enable? This is kind of an important feature I am missing.

Thank you

Share this post


Link to post
Share on other sites
37 minutes ago, corbiz said:

Hi mald0n
I creating boot able usb 10.3.4 via diskmakerx but cant see installer on clover boot screen

Sent from my GT-I9195 using Tapatalk
 

u need it in installer 10.13.4

https://www99.zippyshare.com/v/b9dDJKIv/file.html
 

31 minutes ago, apav said:

Hi MaLd0n,

ok, understood - I can live with that.  I just noticed that WakeOnLAN is also not working.  I tried with it both on and off in bios.  It was working well before.  Is there any way to enable? This is kind of an important feature I am missing.

Thank you

i kill it too, just add _PWR in device lan again ;)

Share this post


Link to post
Share on other sites
On 04/04/2018 at 2:08 PM, corbiz said:

Hi Mald0n
Thanks for you r dedication
My pc everything work fine
Like audio,gfx(without what vargheen) ,usb 3 etc

My config:
i7 2600
H77-m pro asus
Rx560 4gb

Pls help for fine tune my DSDT patch
Attached my runme file

https://drive.google.com/file/d/1bNOl9eiZG1w5QGgm3bZ3M4rbWXYDLTPc/view?usp=drivesdk298a7d75e43c9df913be50bd2fe196df.jpg

Sent from my GT-I9195 using Tapatalk
 

http://www30.zippyshare.com/v/9BcJ7TN2/file.html
send me new dump after reboot

23 minutes ago, okman said:

Could you help me patch my dsdt?

Thanks in advance.

origin.zip

send me full files, check first post

Share this post


Link to post
Share on other sites

Hello, @MaLd0n

I am using your DSDT for my newest Bios F5 @ Gaming 7 board. Thank you!

Everything is good except my monitor's peripheral functions (Camera, audio, brightness control) after sleep/wake, all are gone.

Other monitor's audio and USB hubs are fine. Only this monitor connected by TH3 (Alpine Ridge) not working after sleep/wake.

I attached IOReg. Could you help me? https://www40.zippyshare.com/v/aHt4ZlRB/file.html

When after they are gone away, I need to turn off my computer (rebooting not work for them back) to fix this back to action again.5aca4f038c912_ScreenShot2018-04-08at10_15_10AM.thumb.png.970accf7e61311d30a2781c59321905a.png

Share this post


Link to post
Share on other sites

Hi Mald0n, can you help me with my Hackintosh?

Specs...
MOBO: gigabyte z77x-UP4 TH
RAM: 16gb 8-4-4
Core i7 3770k
RTL8169 Gigabit Ethernet on PCI don't Work on mac on windows works fine
LAN ON BOARD don't work (it's toasted and deactivated from bios)
4 USB 3.0 ports don't Work on mac


https://www.dropbox.com/s/noryidkccum4iaq/Send me iMac GIGA 2.zip?dl=0

Thanks a lot...

Share this post


Link to post
Share on other sites
13 hours ago, nemois said:

Hi Mald0n, can you help me with my Hackintosh?

Specs...
MOBO: gigabyte z77x-UP4 TH
RAM: 16gb 8-4-4
Core i7 3770k
RTL8169 Gigabit Ethernet on PCI don't Work on mac on windows works fine
LAN ON BOARD don't work (it's toasted and deactivated from bios)
4 USB 3.0 ports don't Work on mac


https://www.dropbox.com/s/noryidkccum4iaq/Send me iMac GIGA 2.zip?dl=0

Thanks a lot...

send me full dump, dont edit or remove files, i need all

Share this post


Link to post
Share on other sites
6 hours ago, visin said:

Hello, MaLd0n
Need to trouble you again and help me make my second Hackintosh DSDT.
CPU is i7 2600k
Motherboard is Gigabyte Z77P-D3 V1.1
The graphics card is AMD 7870 2G

Below is the file generated by RenMe.app.

https://drive.google.com/open?id=1pLwIsPYXVh4VlggYnWEJw0EN3m0NHdXP

https://www81.zippyshare.com/v/Izk85xpe/file.html
generate one ssdt

ssdtPRGen.command.zip

4 hours ago, corbiz said:

my dumplog (1 problm found my cpu speed step not working on intel powergadget see

is fixed freequency)

DumpLog.txt

send me full dump, run my app again

Share this post


Link to post
Share on other sites

Hey maldon, having issues with wake from sleep now, nothing has really changed since your last DSDT edit you did for me. System itself runs smooth as butter. I know the sleep/wake problem can be hit or miss. Just wondering if you could help me out.  Your help is always appreciated :)

https://drive.google.com/open?id=163F2bx98Nu3VaAJj3e5UWtCJnjuw1h6-

Share this post


Link to post
Share on other sites
1 hour ago, tikizondo94 said:

Hey maldon, having issues with wake from sleep now, nothing has really changed since your last DSDT edit you did for me. System itself runs smooth as butter. I know the sleep/wake problem can be hit or miss. Just wondering if you could help me out.  Your help is always appreciated :)

https://drive.google.com/open?id=163F2bx98Nu3VaAJj3e5UWtCJnjuw1h6-

what happens with sleep?

CLOVER.zip

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member

  • Similar Content

    • By crazybirdy
      Patched OSInstaller.framework to allow macOS 10.14 installation on MBR HFS+J partition.
       
      To use those patched files you must follow HowTo-10.14.x to create an USB installer. You can't just run the app downloaded from Mac App Store.
       
      The patch is made base on 落下爱@pcbeta 10.10.x MBR patch method, and more patch for 10.14 Firmware check by crazybirdy.
       
      What is this patched OSInstaller doing?
      1. Patch the MBR check, allow macOS 10.14 installation on MBR partition.
      2. Patch the Firmware check, bypass the error of "An error occurred while verifying firmware".
      3. Patch to stop auto-convert to APFS , "ConvertToAPFS=false" is no longer worked with 10.14.
      4. This patched MBR OSInstaller will never convert to APFS, and will always install as HFS+J partition.
      5. This patched MBR OSInstaller method works with both MBR HFS+J and GPT HFS+J partition (GPT+recovery).

      No longer need to set new SMbiosversion, FirmwareFeatures, and FirmwareFeaturesMask with this MBR-patch.
       
      How to make 10.14 installer for MBR?
      Read HowTo-10.14.x.txt inside the zip file first, same as 10.13, different with 10.12.
      Read HowTo Q/A Q7. How to install in different computer with only one USB partition?
       
      Just use 14MBRinstallerMaker to make installer, it works with both MBR and GPT.
       
      And, need a SMBIOS supported with /System/Library/CoreServices/PlatformSupport.plist.
    • By fusion71au
      Clover r4542 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 14 running OSX 10.9 -->10.14 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4542 for VMware.zip". Mount Clover-v2.4k-4542-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By Mario1964
      Hello guys,
      Today i installed the beta on my external SSD ( cause i don't have more space in the case)
      i tried in this way:

      and also using this:

      All goes right but, when i 1st boot the hdd it appears as this:
      (the photo was just old , i'm using the new clover)

      and he stuck at apple logo.
      This are the setting i use to make the usb boot:

      what can i do ?
       
      thx
       
       
    • By fantomas1
      First beta... macOS 10.14 Mojave beta (18A293u)
       
      Useful information:
       
      macOSDeveloperBetaAccessUtility (thanks to gengik84) or direct link from Apple's server nonSupportedModels (thanks to mitch_de) Original apfs Patched apfs (patch is the same credits PMheart and ErmaC) Clover r4515 (thanks to gengik84) USB port limit patch (thanks to PMHeart) "MinStolenPatch" for KabyLake Platform Notebook (thanks to Austere.J)
    • By PingoLinkin
      Motherboard: ASUS / X99 Deluxe II
      Chipset: Intel® X99
      Processador: i7-6800 LGA2011 v3
      Memoria: HyperX - DDR4 24000MHz - 32GB(2x16gb)
      Rede: Intel® I218V, 1 x Gigabit LAN; Intel® I211-AT, 1 x Gigabit LAN LAN; Dual Gigabit LAN controllers- 802.3az Energy Efficient Ethernet (EEE) appliance
      Audio: Realtek® ALC1150 com 8 canais
      Video: Geforce GTX 750 Ti 2GB SC DDR5 128 bits PCI-E 3.0 (1x DVI, 1x DisplayPort, 1x HDMI)
      Keyboard: Apple Aluminium
      Mouse: Microsoft
      HD: SAMSUNG SSD 840 EVO 1TB
       
      ///////////////////////////////////////////
       

       
      1 - Preparando PENBOOT:
        1.1 - Baixe a imagem do Sierra e deixe na pasta "Applications";
        1.2 - Formate o PenDrive e altere o nome para: "MyVolume";
        1.3 - Abra o Terminal e digite a seguinte linha de código, dê enter e quando solicitado digite sua senha. Aguarde o término da instalação, geralmente demora em torno de 20min:
      sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ macOS\ Sierra.app  
       
      1.4 - Baixe a última versão do Clover EFI bootloader: Download
        1.5 - Abra o Clover, na última etapa, clique em Customize, depois marque a opção "Install for UEFI booting only", como na imagem abaixo:

       
        1.6 - Provavelmente a partição "EFI" estará montada, abra a partição e substitua a pasta "CLOVER" por esta CLOVER Asus X99 Deluxe II - Sierra.zip.
       
      2 - Configurando BIOS
        2.1 - Atualize sua BIOS para a versão mais recente, a minha é: 1902
        2.2 - Reset as configurações de sua BIOS em: Exit/Load Optimized Defaults;
        2.3 - Vá para: Boot/CMS (Compatibility Support Module)/Launch CMS: ENABLED;
        2.4 - Vá para: Boot/Secure Boot/OS Type: Other OS;
       
      3 - Instalando OS
        3.1 - Ligue o computador com o Pendrive espetado, ele automaticamente irá iniciar o Clover, caso isso não aconteça, na tela inicial da ASUS, pressione F8 para escolher o pendrive como boot primário;
        3.2 - Em algum momento futuro, seu clover pode não arrancar corretamente, caso isso aconteça, na tela inicial do CLOVER pressione F11 para limpar o NVRAM, ele irá reiniciar a máquina automaticamente, em seguida voltará a arrancar normalmente;
       
      4 - PÓS-INSTALAÇÃO
        4.1 - Inicie seu MAC temporariamente pelo Pendrive como boot primário;
        4.2 - Instale o clover seguindo as etapas 1.4, 1.5 e 1.6 . Apenas não esqueça de alterar o destino para o HD Interno com a instalação do Sierra.
        4.3 - Feito isso, reinicie seu mac, agora sem o pendrive;
       
      5 - VÍDEO
        5.1 - Na pasta CLOVER que anexei acima, já possui as kexts NvidiaGraphicsFixup.kext e Lilu.kext ;
        5.2 - Baixe e instale o nVidia Web Driver(Download) de acordo com a versão do seu OS;
        5.3 - A minha versão, por exemplo, é: "macOS 10.12.6 (16G1408)";
        5.4 - Veja abaixo onde encontrar sua versão:

       
      Obs.: Existe um bug no vídeo, caso queira utilizar a entrada DVI, é preciso iniciar a máquina já com o cabo plugado, caso contrário ele deixará sua tela preta e não voltará mais ao normal até que reinicie a máquina.
       
        5.5 - INSTALANDO O CUDA:
           1 - A última versão não funcionou, então baixei a penúltima e funcionou perfeitamente. A versão instalada foi: CUDA 387.178 driver for MAC.

       
       
      6 - ÁUDIO
        6.1 - Baixe o Voodoo HDA 2.9.0 Clover (Download)
        6.2 - Siga as etapas das imagens que estão dentro do anexo;
       
       
      Não solucionado:
      Não consigo habilitar a placa ThunderboltEX 3;
       
       
      Valeu.
×