Jump to content
MaLd0n

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,451 posts in this topic

Recommended Posts

Advertisement

Used your fantastic guide to get my Hackintosh set up. My hardware is:

Z97MX-Gaming 5

4770K

AMD R9 290

 

I have everything working as I want it except for one minor thing (which is a huge deal for me).

Sleep and wake works great. Except if I use Wake On LAN to wake it up, then the next sleep will not work properly. When I have used WOL and try to put it to sleep, it will immidiatly wake up, which doesn't happen if I haven't used WOL.

 

I use darkwake=0 bootflag.

And I have used DSDT to disable every _PRW except for GLAN and PWRB which looks like this:

 

Device (PWRB)
        {
            Name (_HID, EisaId ("PNP0C0C"))  // _HID: Hardware ID
            Name (_UID, 0xAA)  // _UID: Unique ID
            Name (_STA, 0x0B)  // _STA: Status
            Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
            {
                Return (GPRW (0x1B, 0x03))
            }
        }

 

Device (GLAN)
        {
            Name (_ADR, 0x00190000)  // _ADR: Address
            OperationRegion (GLBA, PCI_Config, Zero, 0x0100)
            Field (GLBA, AnyAcc, NoLock, Preserve)
            {
                DVID,   16,
                Offset (0xCC),
                Offset (0xCD),
                PMEE,   1,
                    ,   6,
                PMES,   1
            }

            Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
            {
                Return (GPRW (0x9D, 0x04))
            }

            Method (_DSW, 3, NotSerialized)  // _DSW: Device Sleep Wake
            {
                Store (Arg0, PMEE)
            }

            Method (GPEH, 0, NotSerialized)
            {
                If (LEqual (DVID, 0xFFFF))
                {
                    Return (Zero)
                }

                If (LAnd (PMEE, PMES))
                {
                    Store (One, PWST)
                    Store (One, PMES)
                    Notify (GLAN, 0x02)
                }
            }
        }

 

This made me think some kind of parameter was saved when WOL was used to wake it up.

So I tried commenting out the _DWS (Device Sleep Wake) part of it. But that didn't do any difference.

I also tried using 0x1B, 0x03 on GLAN instead of 0x9D, 0x04, no difference either.

 

So, what can it be that makes sleep not work properly after using Wake On Lan?

By the way, after it does instantly wake up when i've used WOL, I can try putting it to sleep again, and this time it works. So it is the first sleep after using WOL that's broken.

Share this post


Link to post
Share on other sites

@MaLd0n I'd appreciate some help with my ancient build. It's a Fujitsu X58 board with Xeon W3565. Speedstep with Generate P/C States works (1.6-3.33 GHz). I need help with:

 

- Sleep (goes to sleep fine; waking it wakes the PC but the screen remains off, i.e. blinking LED on the monitor)

- Audio (Lilu + AppleALC don't work, kextd stall. VoodooHDA works)

 

Thank you!

Send me tank.zip

Share this post


Link to post
Share on other sites
5 hours ago, rpo6ap said:

@MaLd0n I'd appreciate some help with my ancient build. It's a Fujitsu X58 board with Xeon W3565. Speedstep with Generate P/C States works (1.6-3.33 GHz). I need help with:

 

- Sleep (goes to sleep fine; waking it wakes the PC but the screen remains off, i.e. blinking LED on the monitor)

- Audio (Lilu + AppleALC don't work, kextd stall. VoodooHDA works)

 

Thank you!

Send me tank.zip

DSDT.aml.zip

Share this post


Link to post
Share on other sites
On 6/18/2019 at 2:41 PM, MaLd0n said:

EFI.zip

check a gpu device id for create a patch with hackintool

 

 

Hi MaLd0n, I haven't been that successful with the Laptop install yet. It mostly gives me some boot error, scrolls through, not like a kernel error. Probably related to the graphics.

Since im struggling with patching that Intel 630 / i7 9750H. 

 

Ive attached another send me file.

Reading from the Forums Framebuffer patching guide it should be the laptop version 0x3EA50009.

 

Ive been in Hackintoshing some time but, haven't dipped my toe in the newer patching stuff, thus would greatly appreciate more help. The device needs the DVMT pre alloc 32mb as well, since windows starts messing up, when I change that value in bios.

 

 

Getting that graphics running would be my main goal, Networking I do with a dongle and ethernet for now and audio, trackpad is another fight for later. 

 

Kind regards, thanks for the help. btw. running on Mojave for now.

 

Gen 8: Coffee Lake (Intel UHD Graphics 630)
- S/L/E/AppleIntelCFLGraphicsFramebuffer.kext
- Support started with macOS 10.13.6 (17G2112) / 10.14 beta 4 (18A336e)
- device-id: 0x3E9B 0x3EA5 0x3EA6 0x3E92 0x3E91 0x3E98
- AAPL,ig-platform-id (desktop): 0x3EA50000 (default), 0x3E9B0007 (recommended)
- AAPL,ig-platform-id (laptop): 0x3EA50009 (default)

 

Send me blacks-MBP2.zip

Share this post


Link to post
Share on other sites
2 hours ago, blackbird_n1 said:

 

Hi MaLd0n, I haven't been that successful with the Laptop install yet. It mostly gives me some boot error, scrolls through, not like a kernel error. Probably related to the graphics.

Since im struggling with patching that Intel 630 / i7 9750H. 

 

Ive attached another send me file.

Reading from the Forums Framebuffer patching guide it should be the laptop version 0x3EA50009.

 

Ive been in Hackintoshing some time but, haven't dipped my toe in the newer patching stuff, thus would greatly appreciate more help. The device needs the DVMT pre alloc 32mb as well, since windows starts messing up, when I change that value in bios.

 

 

Getting that graphics running would be my main goal, Networking I do with a dongle and ethernet for now and audio, trackpad is another fight for later. 

 

Kind regards, thanks for the help. btw. running on Mojave for now.

 

Gen 8: Coffee Lake (Intel UHD Graphics 630)
- S/L/E/AppleIntelCFLGraphicsFramebuffer.kext
- Support started with macOS 10.13.6 (17G2112) / 10.14 beta 4 (18A336e)
- device-id: 0x3E9B 0x3EA5 0x3EA6 0x3E92 0x3E91 0x3E98
- AAPL,ig-platform-id (desktop): 0x3EA50000 (default), 0x3E9B0007 (recommended)
- AAPL,ig-platform-id (laptop): 0x3EA50009 (default)

 

Send me blacks-MBP2.zip

try

EFI.zip

Share this post


Link to post
Share on other sites
Posted (edited)
10 hours ago, MaLd0n said:

try

EFI.zip

Thank You for the quick reply. 

It nicely runs to this point now. 

Above text looks like the graphics got recognised. 

 

I took out nv_disable 1 and played around with the device IDs and was able to boot. No acceleration after 1billion error messages but it started. So maybe the wrong IDs

 

441B7DA2-B3F8-485F-96FC-C84D5F637508.jpeg

Edited by blackbird_n1

Share this post


Link to post
Share on other sites
9 hours ago, blackbird_n1 said:

Thank You for the quick reply. 

It nicely runs to this point now. 

Above text looks like the graphics got recognised. 

 

I took out nv_disable 1 and played around with the device IDs and was able to boot. No acceleration after 1billion error messages but it started. So maybe the wrong IDs

 

441B7DA2-B3F8-485F-96FC-C84D5F637508.jpeg

ye

 

u can check what native device id and ig-platform-id?

 

is a good start for us

Share this post


Link to post
Share on other sites
Posted (edited)
13 minutes ago, MaLd0n said:

ye

 

u can check what native device id and ig-platform-id?

 

is a good start for us

Is there some tool at windows to check them out ? Looked with Aida but wasn't that successful. Checking with OSX is probably bad, since I inject a wrong one. Thanks for the quick response.

 

according to the intel site its 

Device ID is 0x3E9B

Edited by blackbird_n1

Share this post


Link to post
Share on other sites
10 hours ago, blackbird_n1 said:

Is there some tool at windows to check them out ? Looked with Aida but wasn't that successful. Checking with OSX is probably bad, since I inject a wrong one. Thanks for the quick response.

 

according to the intel site its 

Device ID is 0x3E9B

config.plist.zip

Share this post


Link to post
Share on other sites
13 hours ago, blackbird_n1 said:

Sadly it gives the IOconsole / gIOscreenLockupState 3 error again. 

 

bad, is just a video patch, try others ig-platform-id

Share this post


Link to post
Share on other sites

I’ve been playing around with Mojave for few hours now and every way I turn I end up with either kstall AppleACPICPU or busy timeout. 

 

Im a newbie, I’ve got past the installer and onto rebooting after setup finished. And that’s where I hit a wall. Where do I start. 

 

I installed vanilla. Clover. FakeSMC.

 

couldnt fins a dsdt for my board.

 

Board is a H81 intel chipset ( M51AD Asus ) processor is 4460 i5. ( HD4600 ) 

 

have a GT720 too. I’ve tried it with both :/ 

 

any guidance humbly accepted. 

 

Pic is what ahopened as i typed this image.thumb.jpg.e1858b1b9bef4c9b1c90a112d3723c60.jpg

Share this post


Link to post
Share on other sites
12 hours ago, Cowwie82 said:

I’ve been playing around with Mojave for few hours now and every way I turn I end up with either kstall AppleACPICPU or busy timeout. 

 

Im a newbie, I’ve got past the installer and onto rebooting after setup finished. And that’s where I hit a wall. Where do I start. 

 

I installed vanilla. Clover. FakeSMC.

 

couldnt fins a dsdt for my board.

 

Board is a H81 intel chipset ( M51AD Asus ) processor is 4460 i5. ( HD4600 ) 

 

have a GT720 too. I’ve tried it with both :/ 

 

any guidance humbly accepted. 

 

Pic is what ahopened as i typed this 

use kexts only in clover/kexts/other

Share this post


Link to post
Share on other sites

I gave up. Downloaded olari raw. Installed like a charm. Just need to fix Wi-fi. 

 

It pays to follow the guides to the letter!! 

 

thx :) 

Share this post


Link to post
Share on other sites
23 hours ago, MaLd0n said:

.

Hi, ive tried your 10.11.6 and clover didnt load any kext etc and when i tried 10.14.5 i got the error message this version of os x cant install on thos machine etc.

 

 

i have sabertooth x79 3930k cpu gtx 680 zotac 4gig my gpu and mobo have no UEFI.

 

hard drives, 830 evo ssd and nvme 960 evo 250gig.

 

right now im in win 8

 

 

Please can you help me.. im getting nuts over here and being trying different things in 5 days no without any progress :(

Share this post


Link to post
Share on other sites
38 minutes ago, axonleo said:

Hi, ive tried your 10.11.6 and clover didnt load any kext etc and when i tried 10.14.5 i got the error message this version of os x cant install on thos machine etc.

 

 

i have sabertooth x79 3930k cpu gtx 680 zotac 4gig my gpu and mobo have no UEFI.

 

hard drives, 830 evo ssd and nvme 960 evo 250gig.

 

right now im in win 8

 

 

Please can you help me.. im getting nuts over here and being trying different things in 5 days no without any progress :(

EFI.zip

Share this post


Link to post
Share on other sites
1 hour ago, MaLd0n said:

Man you saved my life :( I wanna cry right now :( I felt so hopeless and I have crash restarted my pc 100 times already during the week cause I needed to try different kext and config and none worked with my old 10.11.6 system on my NVME ssd, imagine how much damaged my other hdd have taken from that by now.. don't even wanna know :(

 

But now with ur EFI folder and your 10.14.5 image that I downloaded in windows 8 and with Etcher recreated the usb install and then replaced the standard EFI with the one you send me just now.

Finally I have a working 10.14.5 system.

 

I dont wanna feel so hopeless again and I wanna understand what the hell is in that EFI folder that made my system work right away...

 

I forgot to mention that I still have 10.11.6 in my 960 Evo NVME ssd that I can't boot anymore and I hope you can help me with that :)

Share this post


Link to post
Share on other sites
28 minutes ago, axonleo said:

Man you saved my life :( I wanna cry right now :( I felt so hopeless and I have crash restarted my pc 100 times already during the week cause I needed to try different kext and config and none worked with my old 10.11.6 system on my NVME ssd, imagine how much damaged my other hdd have taken from that by now.. don't even wanna know :(

 

But now with ur EFI folder and your 10.14.5 image that I downloaded in windows 8 and with Etcher recreated the usb install and then replaced the standard EFI with the one you send me just now.

Finally I have a working 10.14.5 system.

 

I dont wanna feel so hopeless again and I wanna understand what the hell is in that EFI folder that made my system work right away...

 

I forgot to mention that I still have 10.11.6 in my 960 Evo NVME ssd that I can't boot anymore and I hope you can help me with that :)

el capo don't have native support for nvme :D use high sierrra+ ;) 

Share this post


Link to post
Share on other sites
Posted (edited)
11 minutes ago, MaLd0n said:

el capo don't have native support for nvme :D use high sierrra+ ;) 

Yeah I know that but I lived with 10.11.6 from 2014 till last week misstake when I removed something in the clover folder...

 

There is some apps that I still need in 10.11, can you please help me boot to my 10.11.6 somehow ? so I can recover some data from my reminder DUE app...

 

This is the error I'm getting right now with ur EFI folder when I try to boot or any folder that I try and I don't know how to fix that.

 

Error usbmsc identifier (non-unique)

IMG_1173.HEIC

Edited by axonleo

Share this post


Link to post
Share on other sites
Posted (edited)

This is the EFI folder I used with my 10.11.6 before when the system did work.. can you check what causing the error I'm getting ?

 

my old 10.11.6 EFI folder 

 https://ufile.io/v5gdns1q

Edited by axonleo

Share this post


Link to post
Share on other sites
6 hours ago, MaLd0n said:

.

I’m not sure what happened just now but from no where the CPU throttles to 3.2ghz without going down and when I restarted the pc I can no longer reach the F8 menu so I can choose the usb flash drive to boot to 10.14 and still the fan is on high speed...?

 

is this coms reset issue or did my 830 evo just burn for some reason ? There is a red led indicator for Sata 2 that is not turning off... how do I get out of this new mess ?

omg what is going on with my pc:(

Share this post


Link to post
Share on other sites
1 hour ago, axonleo said:

I’m not sure what happened just now but from no where the CPU throttles to 3.2ghz without going down and when I restarted the pc I can no longer reach the F8 menu so I can choose the usb flash drive to boot to 10.14 and still the fan is on high speed...?

 

is this coms reset issue or did my 830 evo just burn for some reason ? There is a red led indicator for Sata 2 that is not turning off... how do I get out of this new mess ?

omg what is going on with my pc:(

u need solve power management

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By simras
      Hello,

      I am trying to make a new Hackintosh under 10.13 with this specs:
      i7 6800K,
      Asus X99-E
      Asus GTX 970

      But the problem is that I can't pass those errors :
      - couldn't allocate runtime area
      - end randomseed ++++++++++++++ _

      I have always passed this thing on all hackintoshs that I have done, but here, impossible.

      Tried those tests :
      - AptioMemoryFix alone,
      - AptioMemoryFix with EmuVariableUefi and RC Scripts,
      - OsxAptioFix2Drv-free2000 with EmuVariableUefi and RC Scripts,
      - Test2-2016.efi with OsxAptioFixDrv, EmuVariableUefi and RC Scripts,
      - Test2-2016.efi with OsxAptioFix2Drv, EmuVariableUefi and RC Scripts,
      - Test2-2016.efi with OsxAptioFix2Drv, OsxAptioFixDrv, EmuVariableUefi and RC Scripts,
      - Test2.efi with OsxAptioFixDrv, EmuVariableUefi and RC Scripts,
      - Test2.efi with OsxAptioFix2Drv, EmuVariableUefi and RC Scripts,
      - Test2.efi with OsxAptioFix2Drv, OsxAptioFixDrv, EmuVariableUefi and RC Scripts.

      I have tried all this with npci=0x3000 that I have never used before instead of npci=0x2000

      I have done an Hackintosh on Asus X99 Deluxe II and it pass with AptioMemoryFix with EmuVariableUefi and RC Scripts....

      I have tried to reset NVRAM with F11.

      I have tried with 1 RAM stick that I have indicate in the SMBIOS :
      https://hackintosher.com/forums/thread/mapping-ram-and-dimm-slots-on-a-hackintosh-with-clover-smbios.365/
       
      I have follow KGP guide for X99 :
       
      The BIOS settings are exactly the same.

      I link my CLOVER folder.

      Thank you.
      CLOVER.zip
    • By tonyx86
      I was inspired by @duduclx post for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5.  Everything works perfectly (including sleep with the solution described later in this thread).  I'm starting this thread hoping to help others install Mojave on their E6410s.  This thread is not currently intended to be an installation guide and is better suited to the intermediate/advanced hackintosher.  Eventually, it may evolve into a guide.
       
      I started with this thread and ended up with the system captured in the attached files.  The keys were to change the LPCB._DSM.Name to "3b09" and remove all CLOVER configs not necessary for Mojave, plus some other items mentioned below.
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.6 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 5, not the original version), USBInjectAll (with custom SSDT-UIAC) Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961  
      Configuration items that may be different from what you have seen in other E6410 configurations
      LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads  No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)  
      What is NOT working:
      Sleep is not working with the files attached to this first post, but I have found the solution for sleep/wake.  Read Known Issues below. Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings.  The slider appears in Display settings (because of the backlight DSDT injection in AGP.VID._DSM), but the slider doesn't work (yet).  Haven't spent time to figure this out, but would love help. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
        What is NOT tested:
      SD Card Slot Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS)  
      What IS working:
      Everything else not mentioned above.   Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar).  Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP.  Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: here) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter) Camera  
      Known issues and their solutions
      AAPL,clock-id and device_type do not appear in IORegistry for EHC1.  Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2.  This has been completed and tested, but does not fix the sleep behavior.  This fix is not reflected in the attached files. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used.  Switching to the "Refined ALPS TouchPad driver" is a big improvement.  I've implemented and tested this on my system.  The ALPS version of VoodooPS2Controller.kext mixes up a few keys.  Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European.  The updated VoodooPS2Controller.kext is not reflected in the attached files. This proposed configuration uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load.  While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m).  This AGPM method is discussed later in this thread.  I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior and have not updated attached files to reflect this change. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer).  It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra.  If I "Inject NVidia" via CLOVER, IOHWControl loads properly.  I have made this change and am testing it on my system, but have not updated the attached configuration files. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT).  In the method, the expression  If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS.  I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS.  While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17.  Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The DSDT patch that duduclx refers to as "Intel GMA Ready" in his El Capitan Guide is not applied correctly to the DSDT attached to this post.  Somehow, the contents of patched _DSM are located in the PCI0.VID device instead of in Method (_DSM) within the PCI0.VID device.  MaciASL didn't complain about this, so it went unnoticed, but it doesn't appear to have had any affect.  I have completely removed this "Intel GMA Ready" patch from my DSDT since it is not necessary for Dell Latitude E6410's with NVidia 3100m, but have not updated the attached DSDT. The assigned value of ACOS in the DSDT is conditional on the operating system.  There is no condition for "Darwin."  The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc), analogous to the assignment of OSYS.  I made this change in my DSDT (not yet reflected in the attached files), but have not observed any behavioral differences (sleep or otherwise).  EDIT: Another way to handle this might be to override _OSI with XOSI (defined in a custom SSDT).  Still learning about XOSI and haven't yet drawn a conclusion.  I'm currently experimenting with ACOS and OSYS equivalent to Win7 and Linux (manually patched in my DSDT which has not yet been updated as a new attachment to this post). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port.  I believe that this should be an internal USB port (portType=2).  My custom SSDT-UIAC.dsl is wrong.  I just learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs.  The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15.  I have not attached an updated SSDT-UIAC.aml to this first post, but my current EFI includes an updated SSDT-UIAC.aml with ports HP15, 16 17 and 18 set to internal (portType = 2).  This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working. There are minor differences between a real MacBookPro6,2 IORegistry dump and this HackBookPro6,2 IORegistry dump that can be resolved with simple DSDT edits.  I am now running with these changes, but haven't found these changes to make any difference in operational behavior.  These changes are not reflected in the attached DSDT.
      Rename Device (AC) -> Device (ADP1) Remove UID from Device (HPET) Add compatible ID "PNP0C01" to Device (HPET) Change ADP1:_STA from 0x0F to 0xFFFFFFFF Enable Ambient Light Sensor and renamed to Device (ALS0) from Device (ALS) Add compatible ID "smc-als" to ALS0 Rename LID -> LID0 Change "name" definitions to Buffers in _DSM methods Rename Device (PBTN) to PWRB Rename Device (SBTN) to (SLPB) Change HDAU.hda-gfx from "onboard-1" to "onboard-2" Change GFX0.hda-gfx from "onboard-1" to "onboard-2" Sleep / Wake does not work with the basic DSDT edits.  I have discovered that Sleep / Wake can be made to work by adding discrete graphics _OFF() and _ON() methods to _PTS and _WAK methods respectively (borrowed the concept and code from a working E6430 DSDT: Credit here: https://osxlatitude.com/forums/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/page/6/.  I currently have sleep working on my Latitude E6410 and am continuing to test it.  The solution is documented later in this thread, but files are not yet attached to this first post.  
      Brief Installation Guide (for the experienced Hackintosher):
      Follow duduclx's guide for BIOS config Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD.  When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext.  Also, do not install the DosDude SIP kext (you're using CLOVER to manage SIP). Install the following kexts in /Library/Extensions:  ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original) Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys).  Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z

      CLOVER.zip
    • By DerNuntius
      Hi,
       
      Finally I finished the installation of 10.14.6 on my Dell E5440. Everything works just fine, but HDMI will not work. Every time I plug it in, it causes a grey screen on my laptop monitor. Also on boot up. I attached my EFI Folder, maybe someone can help me. I searched a bit and read something about Azul Framebuffer Kext.
       
      Thank you for helping.
      Greedings,
      Hugo
       
       
      CLOVER.zip
×