Jump to content
MaLd0n

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,483 posts in this topic

Recommended Posts

Hello :)

 

I've just installed Mojave 10.14.2 on my build:

MSI Z77A-G43 (Ivy Bridge)
Intel Xeon E3-1230v2
Radeon R9 280X 3GB
SSD 256GB SATA3

 

Would you like to check my config?
I'm attaching the folder created with the RunMe app

 

Thank you,
Kind regards

Send me Z77A-OSX.zip

Share this post


Link to post
Share on other sites
Advertisement
18 hours ago, rocky376 said:

Hello :)

 

I've just installed Mojave 10.14.2 on my build:

MSI Z77A-G43 (Ivy Bridge)
Intel Xeon E3-1230v2
Radeon R9 280X 3GB
SSD 256GB SATA3

 

Would you like to check my config?
I'm attaching the folder created with the RunMe app

 

Thank you,
Kind regards

Send me Z77A-OSX.zip

DSDT.aml.zip

CLOVER FOLDER

https://olarila.com/forum/viewtopic.php?f=28&t=8222

7 hours ago, nemois said:

Hi MaLd0n, can you helpme with my DSDT and config... thanks!!

Send me iMac.zip

RUN UPDATED APP

RunMe.app

Share this post


Link to post
Share on other sites

 

9 hours ago, MaLd0n said:

 

Thank You very much :D

My computer works great now, I have only problems with sleep&wake.

PC is going to sleep normally but when waked up, there are some issues like: black screen / login screen and freeze / very, very slow performance.

 

This is not a very big thing - I can handle without sleep&wake but I would be grateful if you could take a look.

I'm attaching new files, generated after changes.

 

Kind regards :)

Send me Z77A-OSX.zip

Share this post


Link to post
Share on other sites
On 1/9/2019 at 2:42 PM, rocky376 said:

 

 

Thank You very much :D

My computer works great now, I have only problems with sleep&wake.

PC is going to sleep normally but when waked up, there are some issues like: black screen / login screen and freeze / very, very slow performance.

 

This is not a very big thing - I can handle without sleep&wake but I would be grateful if you could take a look.

I'm attaching new files, generated after changes.

 

Kind regards :)

Send me Z77A-OSX.zip

i think is a gpu problem

Share this post


Link to post
Share on other sites
4 hours ago, MaLd0n said:

Thanks...
i can fix the Pink Screen with... http://www.mathewinkson.com/2013/03/force-rgb-mode-in-mac-os-x-to-fix-the-picture-quality-of-an-external-monitor
I don't have Second display by iGPU, I have only one video output in my RX470, I don't have HDMI AUDIO by RX470, I don't have QuickSync,  I think my config.cfg it's a mess, can you help me with my config.plist file?

Thanks in Advance...

config.plist

Share this post


Link to post
Share on other sites
9 hours ago, MaLd0n said:

i think is a gpu problem

Hello, I did some research and I found that R9 280X have wake issues, and I don't have iGPU in my processor  - so, everything is clear :)

Thank you very much for your support :)

 

Kind regards. 

 

Share this post


Link to post
Share on other sites
13 hours ago, nemois said:

Thanks...
i can fix the Pink Screen with... http://www.mathewinkson.com/2013/03/force-rgb-mode-in-mac-os-x-to-fix-the-picture-quality-of-an-external-monitor
I don't have Second display by iGPU, I have only one video output in my RX470, I don't have HDMI AUDIO by RX470, I don't have QuickSync,  I think my config.cfg it's a mess, can you help me with my config.plist file?

Thanks in Advance...

config.plist

idk about hardware accel in ur hardware, never use it

Share this post


Link to post
Share on other sites

Hi Mald0n,

would you help me with my DSDT and config ?

I've just updated to 10.14.2 and my USB3 ports don't work.

I have a 4790K on a Gigabyte z97x ud5h motherboard, and a sapphire pulse RX580 8GB.

Thanks a lot

magoz

Send me rickys-iMac.zip

Edited by magoz
update

Share this post


Link to post
Share on other sites
2 hours ago, magoz said:

Hi Mald0n,

would you help me with my DSDT and config ?

I've just updated to 10.14.2 and my USB3 ports don't work.

I have a 4790K on a Gigabyte z97x ud5h motherboard, and a sapphire pulse RX580 8GB.

Thanks a lot

magoz

Send me rickys-iMac.zip

DSDT.aml.zip

use my clover folder or ur usbs dont work

https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip

 

after u need a excluded unused ports

https://olarila.com/forum/viewtopic.php?p=65287#p65287

Share this post


Link to post
Share on other sites
1 hour ago, Dan_Marshall said:

Hi MaLd0n,

 

Happy new year to you bro! Hope you are well!

 

Had a bit more progress with my Lenovo t470s - upgraded to 10.14.2 and things a lot better and smoother now.

 

May I ask you take a look at the run me files and offer any assistance (trackpad and battery specifically)

Send me Macbooks-MacBook-Pro.zip

Many thanks

DSDT.aml.zip

check if battery work

 

trackpad is just a kext, u use last voodoops2?

 

Share this post


Link to post
Share on other sites
26 minutes ago, MaLd0n said:

DSDT.aml.zip

check if battery work

 

trackpad is just a kext, u use last voodoops2?

 

Hi mate,

 

Big step - battery status is showing! However, showing at 0% (not charging even though plugged in).

 

Also new DSDT broke sound - no control over volume and unable to adjust.

 

Trackpad is now working in sys prefs, still a little jumpy but not as much as before however can be adjusted in sys prefs.

 

New voodoo installed and seems to be better

 

New dump files 

Send me Macbooks-MacBook-Pro.zip

Edited by Dan_Marshall

Share this post


Link to post
Share on other sites
9 hours ago, Dan_Marshall said:

Hi mate,

 

Big step - battery status is showing! However, showing at 0% (not charging even though plugged in).

 

Also new DSDT broke sound - no control over volume and unable to adjust.

 

Trackpad is now working in sys prefs, still a little jumpy but not as much as before however can be adjusted in sys prefs.

 

New voodoo installed and seems to be better

 

New dump files 

Send me Macbooks-MacBook-Pro.zip

audio inject via clover

 

battery check in rehabman repo, have a good tutorial too

 

 

Share this post


Link to post
Share on other sites

Hi @MaLd0n

Can you please take a look at my system

Thanks

Mac OS 10.12.4

Laptop Model: HP 240 G5   

CPU: Intel Core i5 6200U
          Socket 1168 BGA
Motherboard: HP 81DB
Memory: 8G DDR3
Graphic: Intel HD Graphics 520
               1366x768 Monitor
Audio & Microphone: ALC282 @ Intel Sunrise Point-LP PCH
Touchpad: HP ELAN Touchpad
Network: 802.11n Broadcom
Bluetooth: Broadcom 43142
 
 
I have tried your method of installing mojave, but when i try to install, it stops and then says panic, panic.apple.com
The first version of clover folder, its the one when i followed your guide step by step, and after flashing usb drive, it has that folder.
The second version, i also followed your guide step by step, but took some advice from another guide(https://www.tonymacx86.com/threads/guide-hp-probook-430-g3-skylake-mojave.256770/) from a notebook that has similiar specs to mine, but i only modified cetain kext files that in that guide told me to modify.
In both cases it goes to panic.
Please help me.

CLOVER(version1).rar

CLOVER(version2).rar

Share this post


Link to post
Share on other sites
On 1/12/2019 at 3:25 PM, MaLd0n said:

Thank you very much. I'll give it a try this evening.

What SMBios do you suggest ? I'm currently on iMac 14,2 but macpro 5,1 seems better to other guys...

Edited by magoz
update

Share this post


Link to post
Share on other sites

Hello and thanks for the work you do for the community!!  I hope you could help me here....I have to replace my z270 and i7 7700k on a working Sierra 10.12.6 system , and I was thinking on a z390 and i7 9700k.. would those work on Sierra 10.12.6? or I have to upgrade to H sierra or Mojave? my problem is the gtx 1080 , that with Sierra work perfectly.... and i haven't really understood yet it would work well on high Sierra and mojave because of the driver.... and actually if it would be possible to stay on my system 10.12.6 without much trouble after the hardware upgrade it could save me lot of stress.............  I'm a bit lost here....   could you lend me a hand??!!

Share this post


Link to post
Share on other sites
3 hours ago, Redragon12 said:

Hello and thanks for the work you do for the community!!  I hope you could help me here....I have to replace my z270 and i7 7700k on a working Sierra 10.12.6 system , and I was thinking on a z390 and i7 9700k.. would those work on Sierra 10.12.6? or I have to upgrade to H sierra or Mojave? my problem is the gtx 1080 , that with Sierra work perfectly.... and i haven't really understood yet it would work well on high Sierra and mojave because of the driver.... and actually if it would be possible to stay on my system 10.12.6 without much trouble after the hardware upgrade it could save me lot of stress.............  I'm a bit lost here....   could you lend me a hand??!!

use high sierra 10.13.6

Share this post


Link to post
Share on other sites
On 1/14/2019 at 12:38 AM, primetrack said:

Hi @MaLd0n

Can you please take a look at my system

Thanks

Mac OS 10.12.4

Laptop Model: HP 240 G5   

CPU: Intel Core i5 6200U
          Socket 1168 BGA
Motherboard: HP 81DB
Memory: 8G DDR3
Graphic: Intel HD Graphics 520
               1366x768 Monitor
Audio & Microphone: ALC282 @ Intel Sunrise Point-LP PCH
Touchpad: HP ELAN Touchpad
Network: 802.11n Broadcom
Bluetooth: Broadcom 43142
 
 
I have tried your method of installing mojave, but when i try to install, it stops and then says panic, panic.apple.com
The first version of clover folder, its the one when i followed your guide step by step, and after flashing usb drive, it has that folder.
The second version, i also followed your guide step by step, but took some advice from another guide(https://www.tonymacx86.com/threads/guide-hp-probook-430-g3-skylake-mojave.256770/) from a notebook that has similiar specs to mine, but i only modified cetain kext files that in that guide told me to modify.
In both cases it goes to panic.
Please help me.

CLOVER(version1).rar

CLOVER(version2).rar

Your HP Lappy is closely related to my HP EliteBook G3.. Try this clover and replace with yours..

CLOVER.zip

Share this post


Link to post
Share on other sites

Hello I'm trying to do fresh install of Mojave on Intel DX79SI and need help. Previous install was with Mavericks but after trying to extract DSDT while in clover boot menu I screwed it((. Now can't even boot into old build. When I'm trying to boot into Mojave external installer sometimes I get freeze Apple logo and progress bar, sometimes closed circle. I have successfully created USB drive UEFI Boot Mode with Graphics configuration for nVidia. Could you please help me figure out how can I boot into OSX installer? What boot flags should I use? Thank you in advance! Can some one help me please. Work computer with current job in 3D. Thank you in advance.

 

Intel DX79SI Logic Board
CPU Intel 3.2 GHz
NVIDIA GeForce GTX 680 2048 MB
16 GB 1600 MHz DDR3
SSD 120 GB

 

IMG_0742.JPG

Edited by ak-78
updates

Share this post


Link to post
Share on other sites

Hello Maldon. A little over a year ago you helped me make a dsdt and work some bugs out of my hackintosh. (Page 28 of this thread) I'm still on the same system but i just installed an XFX RX 480 gfx card and need my dsdt edited. In the attachment are the dsdt you made a year ago, and the ssdt's I made and found for my board. Included is the new IOREG dump and my current config file. Speedstep, turbo boost, and system temps are all ok in Intel Speed Gadget. I'm still on 10.12.6, but now that I have Metal support with the RX 480 I will probably install High Sierra soon. Thanks.

for maldon.zip

Share this post


Link to post
Share on other sites

Hi @MaLd0n

 

Since macOS 10.13.6 and now under macOS 10.14.3, I've got a issue with my patched DSDT: Mojave restart randomly at first boot. I have to reboot several times to get a normal startup. Rebuilding don't solve the problem.

 

Could you take a look on my patched DSDT. Please.

 

Thanks

 

Sorry for my bad english

DSDT.aml.zip

Share this post


Link to post
Share on other sites
On 1/23/2019 at 4:30 PM, ak-78 said:

Hello I'm trying to do fresh install of Mojave on Intel DX79SI and need help. Previous install was with Mavericks but after trying to extract DSDT while in clover boot menu I screwed it((. Now can't even boot into old build. When I'm trying to boot into Mojave external installer sometimes I get freeze Apple logo and progress bar, sometimes closed circle. I have successfully created USB drive UEFI Boot Mode with Graphics configuration for nVidia. Could you please help me figure out how can I boot into OSX installer? What boot flags should I use? Thank you in advance! Can some one help me please. Work computer with current job in 3D. Thank you in advance.

 

Intel DX79SI Logic Board
CPU Intel 3.2 GHz
NVIDIA GeForce GTX 680 2048 MB
16 GB 1600 MHz DDR3
SSD 120 GB

 

 

check

https://olarila.com/files/Clover.Folder/CLOVER.X79.zip

 

IN SOME CASES X79 NEED A DSDT PATCH FOR INSTALL

On 1/23/2019 at 7:25 PM, mikey1953 said:

Hello Maldon. A little over a year ago you helped me make a dsdt and work some bugs out of my hackintosh. (Page 28 of this thread) I'm still on the same system but i just installed an XFX RX 480 gfx card and need my dsdt edited. In the attachment are the dsdt you made a year ago, and the ssdt's I made and found for my board. Included is the new IOREG dump and my current config file. Speedstep, turbo boost, and system temps are all ok in Intel Speed Gadget. I'm still on 10.12.6, but now that I have Metal support with the RX 480 I will probably install High Sierra soon. Thanks.

for maldon.zip

i posted in Olarila, check there

7 hours ago, Matgen84 said:

Hi @MaLd0n

 

Since macOS 10.13.6 and now under macOS 10.14.3, I've got a issue with my patched DSDT: Mojave restart randomly at first boot. I have to reboot several times to get a normal startup. Rebuilding don't solve the problem.

 

Could you take a look on my patched DSDT. Please.

 

Thanks

 

Sorry for my bad english

DSDT.aml.zip

post a full dump

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By tonyx86
      *** I have started another thread for installing Catalina on the Dell Latitude E6410.  If you were thinking of installing Mojave, but would prefer to skip right to Catalina, click here. ***
       
      I was inspired by @duduclx post here for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5 and subsequently 10.14.6.  Everything works perfectly (including sleep).  I'm starting this thread hoping to help others install Mojave on their E6410s.  A brief installation guide is provided later in this first post.  The interested reader is encouraged to read the other posts in this thread to see how this solution evolved and to learn additional tips/details not provided in this first post (including dual-booting with macOS and Windows).
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.6 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 6 developed by @Dr. Hurt and compiled by @bronxteck), not the original version), USBInjectAll (with custom SSDT-UIAC), VoodooSDHC.kext (configured as shown here). Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961  
      Configuration items that may be different from what you have seen in other E6410 configurations
      Addition of _OFF and _ON methods to _PTS and _WAK methods respectively (to control discrete graphics in order to enable sleep/wake) LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)  
      What is NOT working:
      Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
        What is NOT tested:
      Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS)  
      What IS working:
      SLEEP IS WORKING! Everything else not mentioned above.   Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar).  Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP.  Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: here) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter) Camera SD Card Reader  
      Known issues and their solutions (These issues have all been resolved, with the solutions incorporated into the attached config files.  The issues are listed here for historical purposes and no further work is needed unless stated otherwise).
      Laptop does not sleep on lid close.  Solution is to add Notify (LID0) code to Method (BTNV) in the DSDT.  This is solved in the Catalina thread. Copy the DSDT from Post #1 in the Catalina thread if you want to remain on Mojave and want your laptop to sleep when closing the lid. Leaving this for historical purposes, but the CLOVER USBFix is no longer necessary after finding that I had incorrectly applied the DSDT _DSM patch for Device (EHC1).  The CLOVER USBFix is not needed after fixing the DSDT..  AAPL,clock-id and device_type do not appear in IORegistry for EHC1.  Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2.  Thank you, @feartech, for this tip. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used.  Switching to the "Refined ALPS TouchPad driver" is a big improvement.  I've implemented and tested this on my system.  The ALPS version of VoodooPS2Controller.kext mixes up a few keys.  Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European. This configuration (captured in the attached config files) uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load.  While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m).  This AGPM method is discussed later in this thread.  I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer).  It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra.  If I "Inject NVidia" via CLOVER, IOHWControl loads properly. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT).  In the method, the expression  If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS.  I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS.  While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17.  Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The assigned value of ACOS and OSYS in the DSDT are conditional on the operating system.  There is no condition for "Darwin."  The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc).  The attached config hard-codes ACOS and OSYS values equivalent to those for Linux.  Another way to handle this (different from the method employed in the attached config files) might be to override _OSI with XOSI (defined in a custom SSDT). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port.  This should be an internal USB port (portType=2).  I learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs.  The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15.  This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working. There are minor differences between a real MacBookPro6,2 IORegistry dump and this HackBookPro6,2 IORegistry dump that can be resolved with simple DSDT edits.  I am now running with these changes, but haven't found these changes to make any difference in operational behavior.
      Rename Device (AC) -> Device (ADP1) Remove UID from Device (HPET) Add compatible ID "PNP0C01" to Device (HPET) Change ADP1:_STA from 0x0F to 0xFFFFFFFF Enable Ambient Light Sensor and renamed to Device (ALS0) from Device (ALS) Add compatible ID "smc-als" to ALS0 Rename LID -> LID0 Change "name" definitions to Buffers in _DSM methods Rename Device (PBTN) to PWRB Rename Device (SBTN) to (SLPB) Change HDAU.hda-gfx from "onboard-1" to "onboard-2" Change GFX0.hda-gfx from "onboard-1" to "onboard-2" Sleep / Wake does not work with the basic DSDT edits.  I have discovered that Sleep / Wake can be made to work by adding discrete graphics _OFF and _ON methods to _PTS and _WAK methods respectively (borrowed the concept and code from a working E6430 DSDT: Credit here: https://osxlatitude.com/forums/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/page/6/. The Clover boot arg should be changed to "darkwake=0" for reasons explained by @holyfield in this thread.  Leaving this for historical purposes: LCD screen is blank when waking laptop by opening lid (screen is not blank when waking with power button).  Solution is to add darkwake=8 to CLOVER boot args.  Thank you @Hervé for this tip.  
      Brief Installation Guide:
      Configure BIOS (version A17) as follows (leave default unless listed here): Boot Sequence: USB, Internal HDD, CD/DVD, Modular Bay HDD; Boot List Option: Legacy; Integrated NIC: Enabled; Parallel Port: Disabled; Serial Port: Disabled; SATA Operation: AHCI; Misc Devices: Enable Modular Bay, Camera, External USB, Microphone, Media Card and 1394; Latitude ON Reader: Disabled; Keyboard Illumination: Auto ALS and Input; Ambient Light Sensor: Enabled; OROM Keyboard Access: Disable; TPM Security: Disable; Computrace: Deactivate; CPU XD Support: Enable; Performance: Enable all options; Power Management: Disable Wake on AC, Disable Wake on LAN/WAN, Express Charge: Standard, Charge Behavior: Enabled; Keypad: Fn Key Only; Mouse/Touchpad: Touchpad/PS-2 Mouse; USB Emulation: Enable Legacy; Fn Key Emulation: Disabled; Fastboot: Thorough; Virtualization: Enable Intel Virtualization, Disable VT for Direct I/O, Disable Trusted Execution; Wireless Switch: Bluetooth and WLAN; Wireless Device Enable: Bluetooth and WLAN;  Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD.  When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext.  Also, do not install the DosDude SIP kext (you're using CLOVER to manage SIP). Install the following kexts in /Library/Extensions:  ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original), VoodooSDHC.kext (configured as shown here). Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys).  Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z After applying Mojave updates, HWMonitor may not display discrete graphics attributes.  On systems with multiple displays, a second (or third display) may not be active after applying the Mojave update.  The solution to this is to run "sudo kextcache -i /" (in a terminal window) and reboot.  This will usually fix the issue.  If the issue is not fixed, run DosDude's Post Install Utility, apply the Legacy Graphics Patch, reboot and then run "sudo kextcache -i /" if necessary.  
      Credits
      In addition to those mentioned in this first post and in subsequent posts in this thread, much of this solution for the Latitude E6410 was made possible by the numerous contributions of @RehabMan.  I hope he's doing well, wherever he is.  Hopefully he has long since forgotten what a PIA I was (and still am) as I was (and still am) learning hackOS.  
       
       


      E6410-Mojave-6v2.zip
    • By MaLd0n
      --Donations via PayPal--
      https://tinyurl.com/r2bvzm7
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      Just paste EFI folder inside EFI partition
      https://www.olarila.com/files/Clover.Folder/Lenovo IdeaPad S145.zip
      Notebooks with ELAN trackpad use it with my folder above
      IdeaPad S145 ELAN.zip
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Cannon Point-LP Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
    • By headkaze
      English: https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md
      Russian: https://www.applelife.ru/threads/intel-hd-graphics-3000-4000-4400-4600-5000-5500-5600-520-530-630.1289648/
      Chinese: https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.cn.md
×