Jump to content
MaLd0n

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,428 posts in this topic

Recommended Posts

The files have been uploaded.

 

System specs are: Intel i5-6500, Asus H110M-A-D3, NVidia 1070 graphics.

 

Please take a look

 

Thank you

 

post files here

-Post ur full Clover folder with original tables, press F4 in Clover Boot Screen, files generate in Clover/Acpi/origin
-Post Ioreg, extract with Ioreg Explorer
-Run it, post files generate in ur desktop

 

 

aphrodite_ioreg.zip

CLOVER.zip

Send me aphrodite.zip

Share this post


Link to post
Share on other sites
Advertisement

Clover Generate P and C States for u too! ;)

You inspired me to try out the clover PM.

 

It seems out with clover PM, the CPU frequency is being adjusted much more better. My previous confusion in this thread is about this.

With SSDT and dropped pm/Ist0 tables, the CPU frequency keeps around max.

 

Do you happen to know why? I see almost everyone is using ssdtPRGen created ssdt, but it just seems not that good.

Share this post


Link to post
Share on other sites

post clover folder here

I just finally understood it.

 

When I use smbios of a iMac, the CPU register IA32_ENERGY_PERF_BIAS is set to 0x1, which is highest performance. At this setting, the CPU freq is maintained at a high level.

 

WHen I use a macbook pro smbios, the same register is set to 0x5, which is performance and power balanced. At this setting, the CPU is shifting more agressively, and average frequency is much lower.

 

I think these are all presets in x86platformplugs, so I'll just take what Apple want it to be.

 

Thank you so much!

Share this post


Link to post
Share on other sites

In my post
[HELP] Kernel Panic on Installation Gigabyte Z97 HD3
you ask me for efi and some data to patch…
yes done uploaded file as requested
I try the F4 on clover boot but don't where it put the file generated suppose on efi folder
however i make a compress file with efi folder + runme.app + ioreg
delete folder apple cause too big

HARDWARE
mobo: Gigabyte Z97-HD3
load default bios with vt-d disable
audio: ALC887
cpu: i7 4790k not overclocked (for now)
gpu: intel hd4600 (problem with QE/CI ---> probably CI work but QE not + glitches)

HP monitor 27" USING HDMI cable
ram 8x2 corsair vengeance ddr3

dvd-cd asus seems work
HD where now installed SIERRA 10.12.5 --> seagate sata 3 TB
BUT I WILL SWITCH TO samsung EVO 850 SSD when completed post installation on hd seagate (and all will be right)
so need also TRIM PATCH suppose

BIOS: vt-d disabled
CAN I re enable VT-d after to make proper work PARALLELS virtual machine ?



 

PROBLEM WITH INTEL HD4600 (see photo of detail in system about this mac -> graphics)
hd4600 glitches and suppose QE/CI doesn't work because the top bar is not transparent


hd4600 glitches so i test QE/CI with dvd player and screensaver

CI seems active cause screen saver run

while DVD not start give me error suppose QE not active

chess make a move but very very glitching and slow not fluid

audio alc887 not know how to fix not patched and not kext inject at this time

 

sleep NOT WORK

 

BOOTING SEQUENCE (-v verbose)

when boot stop long time here: ACPI dinamy table load
VARIOUS ACPI ERRORS see photo

when switch off sierra:  stopped a long time here: restart still waiting on IOUSB….   iousbmouse.....

 

 

 

Share this post


Link to post
Share on other sites

Hi @Mald0n

I changed SMBIOS from iMac17.1 to Mac Book Pro 13.1 because of some sleep issues with iMac17.1

but its seems that old DSDT/Clover (from iMac17.1) not work good with MBP 13.1

now I reinstalled clover and created a fresh acpi files.

iI would be very grateful if you create new patched DSDT/Clover for me. 

and please send the txt files of DSDT paches then I will not disturb you the next time :)

CLOVER - rafigh89.zip

Send me MacBook Pro - rafigh89.zip

MacBook Pro - rafigh89.ioreg.zip

Share this post


Link to post
Share on other sites

u need a previous DSDT with config.plist for inject plugin type=1 and many others patches

 

post ur full cloover folder in use now

Share this post


Link to post
Share on other sites

lower frequency is correct, hwp dont work at minimal frequency, need read about it, need fix it ;)

 

i think the patchs is already in ur DSDT

DSDT.aml.zip


check here

http://www.insanelymac.com/forum/topic/321021-guide-hwpintel-speed-shift-enable-with-full-power-management/?p=2367065

Share this post


Link to post
Share on other sites

lower frequency is correct, hwp dont work at minimal frequency, need read about it, need fix it ;)

 

i think the patchs is already in ur DSDT

attachicon.gifDSDT.aml.zip

ok thanks. the dsdt patches that you are used are from which source?

and please send the dsdt patch for my sound. I want to save it in safe place for future :king:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tonyx86
      I was inspired by @duduclx post for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5.  Everything works perfectly except for sleep.  I'm starting this thread hoping to help others install Mojave on their E6410s and to diagnose and resolve the sleep issue.  This thread is not currently intended to be an installation guide and is better suited to the intermediate/advanced hackintosher.  Eventually, it may evolve into a guide.
       
      I started with this thread (Many thanks, @duduclx !!!) and ended up with the system captured in the attached files.  The keys were to change the LPCB._DSM.Name to "3b09" and remove all CLOVER configs not necessary for Mojave, plus some other items mentioned below.
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.5 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 5, not the original version), USBInjectAll (with custom SSDT-UIAC) Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961  
      Configuration items that may be different from what you have seen in other E6410 configurations
      LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads  No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)  
      What is NOT working:
      Sleep (display goes blank, but power light stays on.  System cannot wake and must be forced off with power button) Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings.  The slider appears in Display settings (because of the backlight DSDT injection in AGP.VID._DSM), but the slider doesn't work (yet).  Haven't spent time to figure this out, but would love help. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
        What is NOT tested:
      SD Card Slot Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS) Camera (I have this disabled in my BIOS)  
      What IS working:
      Everything else not mentioned above.   Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar).  Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP.  Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: @PlutoDelic) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter)  
      Known issues and their solutions
      AAPL,clock-id and device_type do not appear in IORegistry for EHC1.  Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2.  This has been completed and tested, but does not fix the sleep behavior.  This fix is not reflected in the attached files. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used.  Switching to the "Refined ALPS TouchPad driver" is a big improvement.  I've implemented and tested this on my system.  The ALPS version of VoodooPS2Controller.kext mixes up a few keys.  Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European.  The updated VoodooPS2Controller.kext is not reflected in the attached files. This proposed configuration uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load.  While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m).  This AGPM method is discussed later in this thread.  I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior and have not updated attached files to reflect this change. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer).  It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra.  If I "Inject NVidia" via CLOVER, IOHWControl loads properly.  I have made this change and am testing it on my system, but have not updated the attached configuration files. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT).  In the method, the expression  If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS.  I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS.  While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17.  Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The DSDT patch that duduclx refers to as "Intel GMA Ready" in his El Capitan Guide is not applied correctly to the DSDT attached to this post.  Somehow, the contents of patched _DSM are located in the PCI0.VID device instead of in Method (_DSM) within the PCI0.VID device.  MaciASL didn't complain about this, so it went unnoticed, but it doesn't appear to have had any affect.  I have completely removed this "Intel GMA Ready" patch from my DSDT since it is not necessary for Dell Latitude E6410's with NVidia 3100m, but have not updated the attached DSDT. The assigned value of ACOS in the DSDT is conditional on the operating system.  There is no condition for "Darwin."  The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc), analogous to the assignment of OSYS.  I made this change in my DSDT (not yet reflected in the attached files), but have not observed any behavioral differences (sleep or otherwise).  EDIT: Another way to handle this might be to override _OSI with XOSI (defined in a custom SSDT).  Still learning about XOSI and haven't yet drawn a conclusion.  I'm currently experimenting with ACOS and OSYS equivalent to Win7 and Linux (manually patched in my DSDT which has not yet been updated as a new attachment to this post). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port.  I believe that this should be an internal USB port (portType=2).  My custom SSDT-UIAC.dsl is wrong.  I just learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs.  The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15.  I have not attached an updated SSDT-UIAC.dsl to this first post, but my current EFI includes an updated SSDT-UIAC.dsl with ports HP15, 16 17 and 18 set to internal (portType = 2).  This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working.  
      Brief Installation Guide (for the experienced Hackintosher):
      Follow duduclx's guide for BIOS config Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD.  When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext. Install the following kexts in /Library/Extensions:  ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original) Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys).  Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z  


      CLOVER.zip
    • By fusion71au
      Clover r4989 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4989 for VMware.zip". Mount Clover-v2.4k-4989-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By Drovosek
      For my laptop Hp Pavilion 15-au028ur worked patch for HP 3165sf
      I also experimented with manual patching and assembled my own version:

      #Maintained by: RehabMan for: Laptop Patches #Battery_HP-DV6-1380ek.txt # created by RehabMan 2019-xx-xx # based on Battery_HP-DV6-1380ek.txt # additional patches for dv6-1380ek provided by chihab222, credit gsly # works for: #  HP Pavilion 15-au028ur, per Drovosek into method label B1B2 remove_entry; into definitionblock code_regex . insert begin Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n end; # 16-bit EC0 registers #                BADC,   16, #                BFCC,   16, #                MCUR,   16, #                MBRM,   16, #                MBCV,   16, into device label EC0 code_regex BADC,\s+16, replace_matched begin ADC0,8,ADC1,8, end; into device label EC0 code_regex BFCC,\s+16, replace_matched begin FCC0,8,FCC1,8, end; into device label EC0 code_regex MCUR,\s+16, replace_matched begin CUR0,8,CUR1,8, end; into device label EC0 code_regex MBRM,\s+16, replace_matched begin BRM0,8,BRM1,8, end; into device label EC0 code_regex MBCV,\s+16, replace_matched begin BCV0,8,BCV1,8, end; # 16-bit method access into method label CLRI code_regex (\^.*)MBRM replaceall_matched begin B1B2\(%1BRM0,%1BRM1\) end; into method label UPBS code_regex (\^.*)MBRM replaceall_matched begin B1B2\(%1BRM0,%1BRM1\) end; into method label UPBI code_regex (\^.*)BFCC replaceall_matched begin B1B2\(%1FCC0,%1FCC1\) end; into method label UPBS code_regex (\^.*)MCUR replaceall_matched begin B1B2\(%1CUR0,%1CUR1\) end; into method label UPBS code_regex (\^.*)MBCV replaceall_matched begin B1B2\(%1BCV0,%1BCV1\) end;
      The only problem - when it reaches 100% charge, it no longer falls until you reset the CMOS (15-30 seconds hold down the power button on the laptop). In the rehabman guide there is a patch for ASUS in this case, there is a patch method FBST. There is no such method in my DSDT.
      Can someone help?
      Here's a patched and clean DSDT: https://vk.com/doc183234383_509697931
×