Jump to content
MaLd0n

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,456 posts in this topic

Recommended Posts

Advertisement

try it without USB patch

DSDT.aml.zip

the problem is not DSDT, is a bios version with kabylake support, EFI, Clover

Apple Changed many things in 10.12.4 +, if u use a fresh install with 10.12, no problem, the problem is after 10.12.4 and clover versions


if u have a time use a fresh install, install Clover UEFI, Replace folder

 

like here

http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-mobos-serie-200-kabylake-dsdt/?p=2423169

and many other cases ;)

Share this post


Link to post
Share on other sites

Hi,

I have posted my "run me" results and clover configs.

Could you please take a look? What did I miss for a full DSDT/SSDT patch.

The main issue seems native PM. Cpu freq seems not tuned well.

 

Thank you so much.

 

The system specs are:

 

Intel Xeon E3-1240 v3

Asrock H97

Nvidia 750 Ti

Send me Calamari.zip

CLOVER.zip

Share this post


Link to post
Share on other sites

Hi,

I have posted my "run me" results and clover configs.

Could you please take a look? What did I miss for a full DSDT/SSDT patch.

The main issue seems native PM. Cpu freq seems not tuned well.

 

Thank you so much.

 

The system specs are:

 

Intel Xeon E3-1240 v3

Asrock H97

Nvidia 750 Ti

CLOVER.zip

Send me ioreg after reboot, use it for extract

IORegistryExplorer.app.zip

Share this post


Link to post
Share on other sites

u use only DSDT, try with full Clover folder ;)

ioreg is good, need check frequencys

I did copy the entire CLOVER folder into EFI(original one moved way). Something looking weird?

 

How to check freqs? Need anything?

Share this post


Link to post
Share on other sites

I double checked. I did backed up my old CLOVER folder, and put your new ones in EFI.

Rebooted again and saved ioreg. Checked md5, identical to last time.

 

Which kexts were not loaded?

 

Thank you

 

I was accessing my computer via VNC, not directly from it. But I don't think it matters, does it?

 

kexts dont load, etc

 

back up ur old folder and put new ;)

 

ill need check ioreg

Share this post


Link to post
Share on other sites

fakesmc mod, lilu, applealc, dont load ;)

 

I have all the fakesmc, sensors kexts in /Library/Extensions. Maybe a conflict. I'll disable the /library/extensions ones.

Not sure why lilu not loaded.

I used toleda's script to modify onboard audio stuff. Does that conflict with AppleALC? I saw with the new clover configs, onboard audio not working.

Share this post


Link to post
Share on other sites

dont need script, s/l/e and l/e

Is the fakeSMC you added same as the official release? Or you added some mod into info.plist?

I saw some changes, but not sure if it's version different.

Share this post


Link to post
Share on other sites

need check drop tables, kernel PM

if u use Pike SSDT, the best is drop PM tables

if u use Clover PM, dont drop PM tables

nees test

By clover PM, do you mean "KernelPm" patch in KernelAndKextPatch section?

Share this post


Link to post
Share on other sites

cal.zip

I have uploaded the ioreg that uses your entire CLOVER configs.

Those kext not loading the other day was because "inject kexts" is "detect" in system parameter. I changed it to "Yes" and now the kexts are loaded.

 

Could you please take a look at the new ioreg and let me know if they are in good shapes?

The CPU have lots of p-state according to AppleIntelInfo. But from intel gadget app, the freqs doesn't change much.

 

No

Generate P and C States in Acpi Tab

 

Share this post


Link to post
Share on other sites

looks good, audio hdmi, audio onboard, all patches

what not work?

All visible functionalities work. I was just not sure anything missed.

 

Do you have a tutorial on how the DSDT was patched? As I have other 2 PCs, and I'd like to make them patched.

Share this post


Link to post
Share on other sites

Second PC is Asus H110M-A-D3 + i5 6500 + EVGA 1070.

It has been steadily working for 1.5 years, but I just want to make everything perfect.

post files here

-Post ur full Clover folder with original tables, press F4 in Clover Boot Screen, files generate in Clover/Acpi/origin
-Post Ioreg, extract with Ioreg Explorer
-Run it, post files generate in ur desktop

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member

  • Similar Content

    • By Mieze
      This project is dedicated to the memory of Mausi, the cat I loved more than anybody else.
       

       
      A few days before Christmas I started my latest project, a new driver for recent Intel onboard LAN controllers. My intention was not to replace hnak's AppleIntelE1000e.kext completely but to deliver best performance and stability on recent hardware. That's why I dropped support for a number of older NICs. Currently the driver supports:
       
      5 Series
      82578LM 82578LC 82578DM 82578DC 6 and 7 Series
      82579LM 82579V 8 and 9 Series
      I217LM I217V I218LM I218V I218LM2 I218V2 I218LM3 100 Series (since V2.1.0d0)
      I219LM I219V 200 Series (since V2.3.0d0)
      I219LM I219V 300 Series (since V2.4.0d0)
      I219LM I219V  
      Key Features of the Driver
      Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). Support for TCP/IPv6 and UDP/IPv6 checksum offload. Makes use of the chip's TCP Segmentation Offload (TSO) feature with IPv4 and IPv6 in order to reduce CPU load while sending large amounts of data (disabled due to hardware bugs). Fully optimized for Sierra (64bit architecture) but should work with older 64bit versions of macOS too, provided you build from source with the appropriate SDK for the target OS. Support for Energy Efficient Ethernet (EEE). VLAN support is implemented but untested as I have no need for it. The driver is published under GPLv2.  
      Current Status
      The driver has been tested successfully with I217V, I218V and 82579V under 10.9.5 and above. The attached archive includes source code as well as a prebuilt binary (debug version) for Mavericks and newer versions of macOS.   Known Issues
      There seem to be problems while using VMware with version 1.x.x of the driver. In case you are affected use version 2.0.0 or newer.  
      FAQ
      Could you add support of for...? Well, you are probably asking me to add support for one of the older NICs like the 82571/2/3/4L or 82583 and the answer will be no as I dropped support for these chips intentionally. They are broken and I lost more than 2 weeks trying to make it work on the 82574L without success. I was asked to add support for I210, I211 and I350 but as these chips have a completely different architecture, which isn't supported by the underlying Linux driver, this is impossible, sorry. Does it work with Snow Leopard or 32 bit kernels? No and I have no plans to make a version for 32 bit kernels or anything older than Lion. WoL from S5 doesn't work with this driver but under Windows it's working. Is this a driver bug? No it isn't, the driver is working as it should because OS X doesn't support WoL from S5.  
      Installation
      Goto /S/L/E and delete AppleIntelE1000e.kext. Recreate the kernel cache. Open System Preferences and delete the corresponding network interface, e. g. en0. Reboot. Install the new driver and recreate the kernel cache. I recommend to use Kext Wizard or a similar utility for the installation. Reboot Open System Preferences again, select Network and check if the new network interface has been created automatically or create it manually now. Configure the interface.  
      Help - I'm getting kernel panics!
      Well, before you start complaining about bugs after you upgraded macOS and ask me to publish a driver update, you should first try to resolve the issue on your own by cleaning the system caches.
      As the driver uses macOS's private network driver interface, which is supposed to be used by Apple provided drivers only, you might run into problems after an OS update because the linker may fail to recognize that IONetworking.kext has been updated and that the driver needs to be linked against the new version (Apple provided drivers avoid this problem because they are always updated together with IONetworking.kext). As a result, the linking process produces garbage and the driver may call arbitrary code when trying to call functions from IONetworking.kext. This usually results in unpredicted behavior or a kernel panic. In order to recover from such a situation, you should clean the System Caches forcing the linker to recreate it's caches:
      Delete all the files in /System/Library/Caches and it's subdirectories but leave the directories and the symbolic links intact. This is very important! Reboot. Recreate the kernel cache. Reboot again.  
      Troubleshooting
      Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be retrieved with "grep kernel /var/log/system.log" in Terminal. Starting from Sierra use "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Don't copy and paste large amounts of log data to your post. Create an archive with the log data and attach it to your post. In case you don't want to make your log data publicly accessible, contact me via PM and I will provide you a mail address to send it directly to me.  Check your BIOS settings. You might want to disable Network Boot and the UEFI Network Stack as these can interfere with the driver. Double check that you have removed any AppleIntelE1000e.kext from your system because it could prevent the driver from working properly. Delete the following files: /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist /Library/Preferences/SystemConfiguration/preferences.plist Verify your bootloader configuration, in particular the kernel flags. Avoid using npci=0x2000 or npci=0x3000.  In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard, different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable. Changelog
      Version 2.5.0 (2019-10-15) Reworked interrupt throttling code and added new configuration parameters. Version 2.4.0 (2018-04-14) Added support for 300 series versions of I219LM and I219V. Updated underlying Linux source code. Version 2.3.0 (2017-06-20) Added support for 200 series versions of I219LM and I219V. Version 2.2.0 (2016-09-23) Disabled TSO to work around a hardware bug. Version 2.1.0 (2016-05-24) Added support for I219LM and I219V Version 2.0.0 (2015-04-22) First official release which is identical to 2.0.0d2 (only the version number has been changed). Version 2.0.0d2 (2015-04-04) Changed the tx descriptor write back policy for 82579, I217 and I218 to prevent random tx deadlocks. Version 2.0.0d1 (2015-03-14) Uses Apple's private driver interface introduced with 10.8. Supports packet scheduling with QFQ Solves the VMware issue. Version 1.0.0d6 (2015-03-04) Reworked TSO6 support to avoid problems with VMware. Wake-on-LAN now working. Version 1.0.0d5 (2015-02-27) Reworked TSO4 support to eliminate the bug of 1.0.0d4. Added some debug code in order to collect information about the VMware related issue. Version 1.0.0d4 (2015-02-25) Set total length field of the IP-header to zero for TSO4 operations. Report EEE activation state in kernel log message when the link has been established. Version 1.0.0d3 (2015-02-11) Reworked media selection and EEE support (EEE is now activated when both link partners support it. It can be disabled selecting the medium manually). Duplex setting for 10/100 MBit connections is now reported correctly. The number of tx descriptors has been reduced from 2048 to 1024. The code has been cleaned up and obsolete files have been removed. Version 1.0.0d2 (2015-01-31) First development release. Getting the Driver
      The source code can be found on GitHub: https://github.com/Mieze/IntelMausiEthernet There is also a prebuilt binary for 10.11 and above in the download section: http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/ Build from Source for 10.8
      Register as a developer on Apple's developer website. A free membership is sufficient. Download a copy of Xcode 5.1.1 and install it on your machine. In the project select 10.8 as the "Base SDK" and the "Deployment Target". Call "Archive" from the menu "Product" and save the built driver. Credits
      Thanks to RehabMan and Yung Raj for running tests and pointing me in the right direction while I was trying to fix TSO. Special thanks to Yung Raj for motivating me when I was about to give up.
    • By hungdv
      Hello guys,
      I was try to install MacOS Mojave on my new machine but no luck. Can anyone show me which guide to fit my system, please?please?please?
      + Mobo: GIGABYTE Z390 AORUS ELITE LGA1151v2
      + CPU: Intel Core i5-9600K 3.7GHz
      + iGPU: Sapphire RX 580 Pulse 8GB
      + Drives: SSD Samsung 970 Pro PCIe NVMe V-NAND M.2 2280 512GB
      + Ram: Crucial Ballistix Sport LT 2x8GB Bus 2666 DDR4
      + PSU: Corsair RM650 80 Plus GOLD
      + Case: Corsair 220T White RGB Airflow Tempered Glass
      + Cooler: Cooler Master HYPER 212 BLACK EDTION
      + Dual Band Network Card Broadcom Bcm94360 867Mbps.
    • By Rajan Pandit
      Hai, I have,
      i5 2500k
      GA-z68 AP D3 Rev.1
      Corsair 8 GM Ram
      Gigabyte Radeon RX 560 OC 4G Graphic Card
      500 GB Samsung SSD EVOf
       
      with this configuration I tried to install Mojave but After Apple Logo there was a black screen
      then nothing... please help
      I have create USB with terminal and Install Clover_v2.4k_r4961-Legacy.pkg to activate boot
      then I have recessary kext to EFI/KEXT/OTHER 
      but I am struck at Black Screen after apple logo
    • By Rajan Pandit
      Hai, I have,
      i5 2500k
      GA-z68 AP D3 Rev.1
      Corsair 8 GM Ram
      Gigabyte Radeon RX 560 OC 4G Graphic Card
      500 GB Samsung SSD EVO
      .. I want to install Mojave on this configuration...
      please help. what I need to do... 
      I have downloaded the Installer from APP Store...
      please help
×