Jump to content
MaLd0n

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,490 posts in this topic

Recommended Posts

I'm back up and running.. I couldn't boot without having to use the NullCpuPowerManagement kext because i'd get kp without it. The appleintelcpupowermanagement kext was problematic. I tried to tick the AppleIntelCPUPM option under clover and still would kp. I have more testing to do with the sleep/wake etc..===========UPDATE

Just tested sleep, it still goes to sleep fine and still cant wake up with mouse nor keyboard.. But once pressed power button, it wakes up and freezes and restarts.

Edited by Blaggah

Share this post


Link to post
Share on other sites
Advertisement
21 hours ago, jucca said:

Guys, please, need help. Booted successfully, installed everything like in 1.st post. Everything works, except I can't get video out of DVI port on my graphic card. Have connected two monitors (HDMI+DVI), both are recognazible in Display Preferences, but can't get video out of DVI port. Tried to exchange monitors, but no luck. 
My specs are in signature. Thanks

Reinstalled again, and now everything works OOB. Amazing job @MaLd0n Thx.

33ctapd.png
 

Share this post


Link to post
Share on other sites

Hi there,

Dell Optiplex 9020 i7 4770, 16 gb RAM 1333 MHz, Asus GT 710, 2xSSD's, 1 TB HDD, Lacie USB3 3TB Hard Drive, Intel Q87 Express chipset, latest BIOS.

Working without errors in Sierra (iMessage, iTunes, sleep/wake, power management, USB, etc...).

Instant KP after wake in High Sierra:

Anonymous UUID:       809F43C5-41EA-3EAE-D9D5-4C6DAC4D9FC9

Sun Mar 18 11:10:53 2018

*** Panic Report ***
panic(cpu 0 caller 0xffffff800a96e339): Kernel trap at 0xffffff7f8d6bfd08, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000033, CR3: 0x000000001398f000, CR4: 0x00000000001627e0
RAX: 0x0000000000000000, RBX: 0xffffff803299c050, RCX: 0x0000000000000202, RDX: 0xffffff81cba22a69
RSP: 0xffffff920180b8a0, RBP: 0xffffff920180b8d0, RSI: 0xffffff920180b970, RDI: 0xffffff803299c050
R8:  0xffffff920180b710, R9:  0x0000000000000008, R10: 0x0000000000000010, R11: 0x0000000000000000
R12: 0xffffff803299c050, R13: 0xffffff7f8d72f398, R14: 0x0000000000000000, R15: 0x0000000000004006
RFL: 0x0000000000010202, RIP: 0xffffff7f8d6bfd08, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000000000000033, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 1

Backtrace (CPU 0), Frame : Return Address
0xffffff920180b350 : 0xffffff800a84f606 
0xffffff920180b3a0 : 0xffffff800a97c654 
0xffffff920180b3e0 : 0xffffff800a96e149 
0xffffff920180b460 : 0xffffff800a801120 
0xffffff920180b480 : 0xffffff800a84f03c 
0xffffff920180b5b0 : 0xffffff800a84edbc 
0xffffff920180b610 : 0xffffff800a96e339 
0xffffff920180b790 : 0xffffff800a801120 
0xffffff920180b7b0 : 0xffffff7f8d6bfd08 
0xffffff920180b8d0 : 0xffffff7f8d6d7388 
0xffffff920180b910 : 0xffffff7f8d6d70f0 
0xffffff920180b960 : 0xffffff7f8d6d7037 
0xffffff920180b9c0 : 0xffffff7f8d6d47e5 
0xffffff920180ba00 : 0xffffff7f8d6d9a0c 
0xffffff920180ba30 : 0xffffff7f8d6de088 
0xffffff920180ba80 : 0xffffff7f8d6ff134 
0xffffff920180bb00 : 0xffffff7f8d7004d9 
0xffffff920180bb40 : 0xffffff7f8d7011c2 
0xffffff920180bb90 : 0xffffff7f8d6f868c 
0xffffff920180bbd0 : 0xffffff7f8d6fcded 
0xffffff920180bc30 : 0xffffff7f8d6f36da 
0xffffff920180bc80 : 0xffffff7f8d6f4e1c 
0xffffff920180bcb0 : 0xffffff7f8d6f5f54 
0xffffff920180bcd0 : 0xffffff7f8d6bb15e 
0xffffff920180bd20 : 0xffffff7f8d6bf48f 
0xffffff920180bd40 : 0xffffff800aeb05e8 
0xffffff920180bd90 : 0xffffff800aeddfc5 
0xffffff920180be00 : 0xffffff800ae7896b 
0xffffff920180be50 : 0xffffff800ae75b58 
0xffffff920180beb0 : 0xffffff800ae72b83 
0xffffff920180bef0 : 0xffffff800ae72a12 
0xffffff920180bf30 : 0xffffff800ae8f132 
0xffffff920180bf70 : 0xffffff800ae8e76c 
0xffffff920180bfa0 : 0xffffff800a8004f7 
      Kernel Extensions in backtrace:
         com.apple.driver.AppleACPIPlatform(6.1)[1804645B-B360-305E-B1BE-916F5E3E1CC4]@0xffffff7f8d6af000->0xffffff7f8d74afff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[8794C760-FDD9-3664-ADED-4A9BBEC6E517]@0xffffff7f8b121000
            dependency: com.apple.driver.AppleSMCRTC(1.0)[3F01C7A4-754F-39DD-A872-B4FAF0442276]@0xffffff7f8d0e6000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[8E6C654E-4A8F-3C6B-BBFE-BA8A68C9C146]@0xffffff7f8b0e6000
            dependency: com.apple.driver.AppleSMC(3.1.9)[259F0A4B-0AAB-30F3-8896-629A102CBD70]@0xffffff7f8b12a000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 darkwake=0 nvda_drv=1 kext-dev-mode=1 -v 

Please be aware that CPU powermanagement works only with C-States and P-States injected with Clover. If I use Plugin=true, SSDT-XCPM or Pike SSDT, CPU doesn't go lower than 3 gHz.

I don't use USB Injector but instead, FakePCIID Mux. Anyway, it doesn't make a difference with KP's. Tried to drop a bunch of tables, different parameters in Clover, no changes. Tried without NVidia card, no changes. GenericUSBXHCI is needed for my Lacie drive, as the computer won't even boot when connected to regular USB3 ports.

Files: https://1drv.ms/f/s!AsCftN_jdRMFugZ-HX6GsHXaVlQC

 

Thanks a lot,

 

Patrice

**I'm not alone in the situation, nobody with a 9020 is able to sleep/wake in HS for the moment.

Edited by brousseau6933

Share this post


Link to post
Share on other sites

can this work with asus hero vi this guide

my parts are 

intel i7 4790k

16 ram corsair ddr3

asus maximus VI hero

660 gtx evga  

ssd 940 evo os installer

1tb hardrive storage's

Share this post


Link to post
Share on other sites
6 hours ago, brousseau6933 said:

Hi there,

Dell Optiplex 9020 i7 4770, 16 gb RAM 1333 MHz, Asus GT 710, 2xSSD's, 1 TB HDD, Lacie USB3 3TB Hard Drive, Intel Q87 Express chipset, latest BIOS.

Working without errors in Sierra (iMessage, iTunes, sleep/wake, power management, USB, etc...).

Instant KP after wake in High Sierra:


Anonymous UUID:       809F43C5-41EA-3EAE-D9D5-4C6DAC4D9FC9

Sun Mar 18 11:10:53 2018

*** Panic Report ***
panic(cpu 0 caller 0xffffff800a96e339): Kernel trap at 0xffffff7f8d6bfd08, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000033, CR3: 0x000000001398f000, CR4: 0x00000000001627e0
RAX: 0x0000000000000000, RBX: 0xffffff803299c050, RCX: 0x0000000000000202, RDX: 0xffffff81cba22a69
RSP: 0xffffff920180b8a0, RBP: 0xffffff920180b8d0, RSI: 0xffffff920180b970, RDI: 0xffffff803299c050
R8:  0xffffff920180b710, R9:  0x0000000000000008, R10: 0x0000000000000010, R11: 0x0000000000000000
R12: 0xffffff803299c050, R13: 0xffffff7f8d72f398, R14: 0x0000000000000000, R15: 0x0000000000004006
RFL: 0x0000000000010202, RIP: 0xffffff7f8d6bfd08, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000000000000033, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 1

Backtrace (CPU 0), Frame : Return Address
0xffffff920180b350 : 0xffffff800a84f606 
0xffffff920180b3a0 : 0xffffff800a97c654 
0xffffff920180b3e0 : 0xffffff800a96e149 
0xffffff920180b460 : 0xffffff800a801120 
0xffffff920180b480 : 0xffffff800a84f03c 
0xffffff920180b5b0 : 0xffffff800a84edbc 
0xffffff920180b610 : 0xffffff800a96e339 
0xffffff920180b790 : 0xffffff800a801120 
0xffffff920180b7b0 : 0xffffff7f8d6bfd08 
0xffffff920180b8d0 : 0xffffff7f8d6d7388 
0xffffff920180b910 : 0xffffff7f8d6d70f0 
0xffffff920180b960 : 0xffffff7f8d6d7037 
0xffffff920180b9c0 : 0xffffff7f8d6d47e5 
0xffffff920180ba00 : 0xffffff7f8d6d9a0c 
0xffffff920180ba30 : 0xffffff7f8d6de088 
0xffffff920180ba80 : 0xffffff7f8d6ff134 
0xffffff920180bb00 : 0xffffff7f8d7004d9 
0xffffff920180bb40 : 0xffffff7f8d7011c2 
0xffffff920180bb90 : 0xffffff7f8d6f868c 
0xffffff920180bbd0 : 0xffffff7f8d6fcded 
0xffffff920180bc30 : 0xffffff7f8d6f36da 
0xffffff920180bc80 : 0xffffff7f8d6f4e1c 
0xffffff920180bcb0 : 0xffffff7f8d6f5f54 
0xffffff920180bcd0 : 0xffffff7f8d6bb15e 
0xffffff920180bd20 : 0xffffff7f8d6bf48f 
0xffffff920180bd40 : 0xffffff800aeb05e8 
0xffffff920180bd90 : 0xffffff800aeddfc5 
0xffffff920180be00 : 0xffffff800ae7896b 
0xffffff920180be50 : 0xffffff800ae75b58 
0xffffff920180beb0 : 0xffffff800ae72b83 
0xffffff920180bef0 : 0xffffff800ae72a12 
0xffffff920180bf30 : 0xffffff800ae8f132 
0xffffff920180bf70 : 0xffffff800ae8e76c 
0xffffff920180bfa0 : 0xffffff800a8004f7 
      Kernel Extensions in backtrace:
         com.apple.driver.AppleACPIPlatform(6.1)[1804645B-B360-305E-B1BE-916F5E3E1CC4]@0xffffff7f8d6af000->0xffffff7f8d74afff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[8794C760-FDD9-3664-ADED-4A9BBEC6E517]@0xffffff7f8b121000
            dependency: com.apple.driver.AppleSMCRTC(1.0)[3F01C7A4-754F-39DD-A872-B4FAF0442276]@0xffffff7f8d0e6000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[8E6C654E-4A8F-3C6B-BBFE-BA8A68C9C146]@0xffffff7f8b0e6000
            dependency: com.apple.driver.AppleSMC(3.1.9)[259F0A4B-0AAB-30F3-8896-629A102CBD70]@0xffffff7f8b12a000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 darkwake=0 nvda_drv=1 kext-dev-mode=1 -v 

Please be aware that CPU powermanagement works only with C-States and P-States injected with Clover. If I use Plugin=true, SSDT-XCPM or Pike SSDT, CPU doesn't go lower than 3 gHz.

I don't use USB Injector but instead, FakePCIID Mux. Anyway, it doesn't make a difference with KP's. Tried to drop a bunch of tables, different parameters in Clover, no changes. Tried without NVidia card, no changes. GenericUSBXHCI is needed for my Lacie drive, as the computer won't even boot when connected to regular USB3 ports.

Files: https://1drv.ms/f/s!AsCftN_jdRMFugZ-HX6GsHXaVlQC

 

Thanks a lot,

 

Patrice

**I'm not alone in the situation, nobody with a 9020 is able to sleep/wake in HS for the moment.

replace full clover folder, reboot, after we solve usb3 non intel

http://www114.zippyshare.com/v/Mi7D9cN8/file.html
 

47 minutes ago, patricia2626 said:

can this work with asus hero vi this guide

my parts are 

intel i7 4790k

16 ram corsair ddr3

asus maximus VI hero

660 gtx evga  

ssd 940 evo os installer

1tb hardrive storage's

send me files, check first post

Share this post


Link to post
Share on other sites

Thanks a lot for your hard work MaLd0n: unfortunately, same KP at sleep/wake and Lacie USB3 couldn't mount drive in finder (interesting the way you bypassed GenericUSBXHCI!). The USB3 card is a NEC/Renesas BTW...

Edited by brousseau6933

Share this post


Link to post
Share on other sites

@MaLd0n any more recommendations for me bro?  I'm beginning to think that my board is very problematic. Perhaps i might consider flashing a newer bios if theres one available.  What do you think.. I've had successful hacks with the g3258 before with proper power management.. But with this board, it's been a problem for me since the beginning.

Share this post


Link to post
Share on other sites

Hello MaLdOn...Thank you for your help before   -感谢你之前的帮助

Recently I met some troubles

and thanks god...I learnt fix DSDT errors...and fixed mine

after I have patched...most function is ok...(I install 12.6 before...last weekend I installed 13.3 then put 

my DSDT into right path...system can sleep but after it finish sleep , it

wake immediately,,,I remember I have patched 7/8 Serial USB patch

and other problem is : after it wake ,show the login view

system is very unfluent...I login ,and check CPU status

it keep a low frequency all the time...

at present ,,, there are 2 problems I want to resolve

 

Share this post


Link to post
Share on other sites
13 hours ago, brousseau6933 said:

Thanks a lot for your hard work MaLd0n: unfortunately, same KP at sleep/wake and Lacie USB3 couldn't mount drive in finder (interesting the way you bypassed GenericUSBXHCI!). The USB3 card is a NEC/Renesas BTW...

send me new dump with new files

10 hours ago, Blaggah said:

@MaLd0n any more recommendations for me bro?  I'm beginning to think that my board is very problematic. Perhaps i might consider flashing a newer bios if theres one available.  What do you think.. I've had successful hacks with the g3258 before with proper power management.. But with this board, it's been a problem for me since the beginning.

this way is: we need a x86platform, but if u have kp with AppleIntelCPUPowerManagement...is wrong, need a patches to kernel, like x99, etc, procs without a native support

8 hours ago, ford22 said:

DESKTOP Intel Series 6

ASUS H61M-K
I3-2120
NVIDIA GTS 480 1GB
SCREN 1440X900
ALC887
RTL8168

help fixed all speed computer pls

Sierra or High sierra signal graphics 

https://www.sendspace.com/file/e5uf0j

i think ur GPU loose suppoort in new systems, buy other, check a cost benefit for sierra and high sierra

Share this post


Link to post
Share on other sites

Same link as before: Files: https://1drv.ms/f/s!AsCftN_jdRMFugZ-HX6GsHXaVlQC

I've kept the iMac 14,1 SMBIOS 'cause some audio software is tied to my hardware infos. If it is not a problem to keep 14,1, I'll keep it.

As for the Lacie drive, it is connected to a PCIe USB3 NEC/Renesas card. I doubt it will work with Apple kext. Fornow on, the partitions do not mount at all.

Power management: even if LPC is loaded, platformshim and plugin true: CPU stays in the 3 gHz range... even at idle.

 

Thanks,

 

Patrice

Share this post


Link to post
Share on other sites

Noticed that sound doesn't work on wake on after sleep

Share this post


Link to post
Share on other sites
1 hour ago, brousseau6933 said:

Same link as before: Files: https://1drv.ms/f/s!AsCftN_jdRMFugZ-HX6GsHXaVlQC

I've kept the iMac 14,1 SMBIOS 'cause some audio software is tied to my hardware infos. If it is not a problem to keep 14,1, I'll keep it.

As for the Lacie drive, it is connected to a PCIe USB3 NEC/Renesas card. I doubt it will work with Apple kext. Fornow on, the partitions do not mount at all.

Power management: even if LPC is loaded, platformshim and plugin true: CPU stays in the 3 gHz range... even at idle.

 

Thanks,

 

Patrice

use previous DSDT, DSDT is bios, not system ;)

1 hour ago, jucca said:

Noticed that sound doesn't work on wake on after sleep

CodecCommander.kext.zip

Share this post


Link to post
Share on other sites
45 minutes ago, MaLd0n said:

use previous DSDT, DSDT is bios, not system ;)

The files in the link are the new ones from today: you will find the DSDT in the EFI.zip...

 

EDIT: Sorry for the mess, my MacBook Pro sent back the old files on OneDrive...

https://1drv.ms/f/s!AsCftN_jdRMFugZ-HX6GsHXaVlQC

Edited by brousseau6933

Share this post


Link to post
Share on other sites
2 hours ago, brousseau6933 said:

The files in the link are the new ones from today: you will find the DSDT in the EFI.zip...

 

EDIT: Sorry for the mess, my MacBook Pro sent back the old files on OneDrive...

https://1drv.ms/f/s!AsCftN_jdRMFugZ-HX6GsHXaVlQC

the ioreg is good

check log if u see a TSC error after sleep

Share this post


Link to post
Share on other sites

Hi, I am trying to troubleshoot freezing issues im having with my rig.

Mobo: Asus x99 Deluxe-II

Cpu: 6950x

Gpu: Aorus 1080 ti

OS: 10.13.3

I have got everything implemented to where everything seems to function correctly, but when i do any type of rendering with adobe premier/media encoder or redcine-x. I lock up. here is the kicker i can run prime95 all night and i can run cinebench gpu test over and over again with no issues. I can even idle for days. Im really stuck and im not sure what to do. 

I am wondering if you maybe able to take a look at my rig. I have ran your runme.app and here is the results. https://drive.google.com/file/d/1a5xuZP4YlL-zFCo8d-i1XlOxyyjM891K/view?usp=sharing

Any help or advice would be awesome thanks!

Edited by GuySmileZ

Share this post


Link to post
Share on other sites
16 hours ago, MaLd0n said:

the ioreg is good

check log if u see a TSC error after sleep

Nothing after sleep, no TSC errors: I even tried VoodooTSCSync.kext and it caused a real mess on my hack. I had to clear CMOS, clear NVRAM and now, all seems good. HS sleep/wake looks to be a severe incompatibility between my BIOS/MB/Chipset...

 

Thanks anyway for your help.

 

Patrice

Share this post


Link to post
Share on other sites
19 hours ago, MaLd0n said:

installed via KextHelper, but didn't solve. Still no audio after sleep. Or I had to install Codeccommander in some other way_

 

Share this post


Link to post
Share on other sites

Hello MaLd0n, 

firstly i want to say thank you for your great support. It’s a good feeling to know there exist a guy with the knowledge that you have and that this guy can help me maybe.

I hope that your knowledge can help me now. Sorry for my bad English...

Since High Sierra I have some trouble with my secondary integrated  two HDDs. Its one WDC with 1 TB and a Hitachi with 2 TB. I see the disks in DU and Term with  diskutil list but I can't initialise them cause (According to the error message) there is no partition table. But it is and when i replace the DSDT with a clover patched but wrong one I can see the disks. The Problem is  This DSDT don't work for me in case of some software that won't start anymore or crash after replace. It seems that my SATA Ports are limited maybe, I don't know and I need help to fix it... 

With patching a DSDT i am very inexperienced. 

Please help me. What you need?

Share this post


Link to post
Share on other sites

ah i forgot to tell you my motherboard/bios >> GA-EX58-UD4P-f13

Share this post


Link to post
Share on other sites
On 20/03/2018 at 3:47 AM, Blaggah said:

How do i go about getting you those stuff you'd need? At this point im desperate..

is a sleep problem, correct? idk bro, we dont see nothing in log

20 hours ago, brousseau6933 said:

Nothing after sleep, no TSC errors: I even tried VoodooTSCSync.kext and it caused a real mess on my hack. I had to clear CMOS, clear NVRAM and now, all seems good. HS sleep/wake looks to be a severe incompatibility between my BIOS/MB/Chipset...

 

Thanks anyway for your help.

 

Patrice

avoid use it ;)

20 hours ago, jucca said:

installed via KextHelper, but didn't solve. Still no audio after sleep. Or I had to install Codeccommander in some other way_

 

codec is alc 1150?

u dont need kexthelper, just put kext in clover/kexts/other, reboot

4 hours ago, j0h.M said:

Hello MaLd0n, 

firstly i want to say thank you for your great support. It’s a good feeling to know there exist a guy with the knowledge that you have and that this guy can help me maybe.

I hope that your knowledge can help me now. Sorry for my bad English...

Since High Sierra I have some trouble with my secondary integrated  two HDDs. Its one WDC with 1 TB and a Hitachi with 2 TB. I see the disks in DU and Term with  diskutil list but I can't initialise them cause (According to the error message) there is no partition table. But it is and when i replace the DSDT with a clover patched but wrong one I can see the disks. The Problem is  This DSDT don't work for me in case of some software that won't start anymore or crash after replace. It seems that my SATA Ports are limited maybe, I don't know and I need help to fix it... 

With patching a DSDT i am very inexperienced. 

Please help me. What you need?

u try it?

http://www.insanelymac.com/forum/topic/327488-macos-high-sierra-final-release-is-out-17a365/page-10#entry2505086

<dict>
                <key>Comment</key>
                <string>fix IO error ICH10 for 10.13, credit SunKi</string>
                <key>MatchOS</key>
                <string>10.13.x</string>
                <key>Disabled</key>
                <false/>
                <key>Name</key>
                <string>AppleAHCIPort</string>
                <key>Find</key>
                <data>RYX2D5XCiciD4P5mhcl4D4TSdQs=</data>
                <key>Replace</key>
                <data>iciD4P5mhckPmMFBCMyQkJCQdQs=</data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>fix hotplug ICH10 for 10.13, credit SunKi</string>
                <key>MatchOS</key>
                <string>10.13.x</string>
                <key>Disabled</key>
                <false/>
                <key>Name</key>
                <string>AppleAHCIPort</string>
                <key>Find</key>
                <data>icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA=</data>
                <key>Replace</key>
                <data>kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA=</data>
</dict>

Share this post


Link to post
Share on other sites

should i have to note something? I used CL Conf for the patches rebooted one time but nothing changed, if i wanna initialize the HDs i get i/o error 5. maybe the shell dd for analyse but it will a long procedure 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member

  • Similar Content

    • By Fantome1S
      Finaly Success to boot on Sierra 10.12.6 (16G29) with Touchscreen working theres still things to fix but everything is almost working. During the Corvid StayAtHome Period I was able and have time to make this laptop boot on MacOS after a lot of attemps before going back to job. It was the hardest laptop hackintosh install attemp i've done so far and Sierra OS is the only that works. I tried El Capitan and Mojave and its never boot so I not even tested Catalina. I searched on the web and theres no install guide for this specific laptop or no Success install post on this laptop its look like a not very well supported laptop by hackintosh. Maybe some of you can help me correct the things that still not work. Audio work but with voodo (low sound and low quality) I want to make it work with AppleALC to get better quality sound. Thanks in advance
       
      Things that work:
       
      -Touchscreen
      -Trackpad (not the gesture for now) - Backlight Keyboard
      -EthernetPort and Wireless (with a wifi dongle. I will change to a broadcom wifi mini-pci chip)
      -Brightness Controls with FN key
      -Audio Voodoo ''low sound'' (will tried to change to AppleALC or AppleHDA fix method) 
      -USB 3.0
       
      Things that not work or need to be fixed:
       
      -Weird double long booting screen-first loading bar on the right. after real loading bar is visible ?
      -Audio (Voodoo) work but with low volume sound- still not success to make work AppleALC.kext method
      -SENSORS -CPU-HDD Temperatures, BATTERY LEVEL, ETC…
      - Sleep (Disabled): USB ports not works after wake from sleep
      -Trackpad Gestures
       
      Hardware:
       
      CPU: Intel Core i7-3687U, 2100 MHz
      GPU: Intel HD Graphics 4000
      RAM: 12 GB (4GB soldered + 8 GB Samsung DDR3 1600)
      Motherboard/Laptop model: Intel Panther Point QM77, Intel Ivy Bridge - (HP Revolve 810 G1)
      Audio Codec: IDT 92HD91BXX @ Intel Panther Point PCH - High Definition Audio Controller
      Ethernet Card: Intel(R) 82579LM Gigabit Network Connection
      Wifi/BT Card: Intel(R) Centrino(R) Advanced-N 6235
      HP hs2350 HSPA+ MobileBroadband Network Adapter
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9400K, 9600K, 9700K, 9900K, 9900KS (All KF Models work but use SMBios iMacPro1,1 instead)
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, RX 5500, 5500 XT, 5600, 5600 XT, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Reference RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM94360CS2 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      CLOVER & OPENCORE EFIs 
      Current EFIs Updated 01/06/2020
       
       
      Clover EFI Update v5118 - 01/06/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
       
      Clover Z390 Master Navi Vega EFI 010620.zip - Vega, Navi (5700, 5700XT etc), Radeon VII DSDT EFI
      Clover Z390 Master Polaris EFI 010620.zip - RX500 Polaris Series (RX590, 580, 570 etc) DSDT EFI
       
      Please Note - I have now set KernelPM to No as standard so if you don’t have a unlocked MSR or not using my MSR Unlocked Bios Profile then go into the Clover Config.plist and set KernelPM to Yes or you won’t be able to boot up. An even better fix would be to unlock your MSR using my profile method.
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
       
       
      OpenCore EFI Update v0.5.9 - 01/06/2020
      Myself and @texem have now created a OpenCore EFI done the way the OpenCore Devs intended it to be made, There is no DSDT in use so you can use this EFI on any supported GPU and the SSDTs have been made so they will not be used in any other Operating System apart from MacOS.
       
      OpenCore 059 Z390 Master 19,1 010620.zip - OpenCore v0.5.9, SMBios iMac19,1
      OpenCore 059 Z390 Master 1,1 010620.zip - OpenCore v0.5.9, SMBios iMacPro1,1 (IGPU Disabled)
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
      Note 2 - Do not try to carry across your old OpenCore Config.plist to the new EFI as to many changes have occurred in 0.5.9. Use the new Config.plist instead.
       
       
      PlistEdit Pro.zip - PlistEdit Pro (use to edit OpenCore)
       
      Using PlistEdit Pro add your details by modifying the following 

       
      PLEASE NOTE - These EFIs are setup to be used with your msr Unlocked so make sure you use the F11c Unlocked Profile but if for any reason you can not unlock MSR then just modify following in the OpenCore config.plist :
      
       
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       

       

       

       

       

       

       

       
      OpenCore 058 Z390 Master 1,1 040520.zip
    • By batty86
      Buonasera a tutti, ho bisogno di aiuto per l'installazione di Mojave sul pc in firma. Ho provato ad installarlo, tutto procede bene, solo che al secondo riavvio dal ssd di destinazione del oS l'installazione procede fino alla maschera di configurazione del computer ma si riavvia non consentendomi di configurarlo, va loop di riavvio. Sono grato in anticipo per il vs aiuto.
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      -Donation with Mercado Livre 
      https://tinyurl.com/y9evkj5u
       
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      https://tinyurl.com/rkqmpd9
       
      --OpenCore Folder--
      https://tinyurl.com/y75hqg7z
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
×