Jump to content
MaLd0n

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,449 posts in this topic

Recommended Posts

try

CLOVER.zip

check PM after reboot, if Clover dont generate a good one, use ssdt

ok i attached the new ioreg and screen caps what dpcimanager showed in the pci list.

ur USB3 not intel, u have a usb3 texas Intruments and ASMEDIA too, into device PEX1 and PEX2

U need try a UsbGeneric kext

Check

xuzhin.zip

Use new DSDT, check in config.plist Generate P and C States

Sorry Still the same problem as before,

 

 

 

 

snake man

sorry, i dont remember, many ppl every day

Share this post


Link to post
Share on other sites
Advertisement

 

Kind Sir I really need your help I have a intel 945GCNL I know its old but I want to use it as media center with mini4.1 in the end. but all it does is crash.  I finally have it installed via my optiplex 760M/T but as soon as I place it in the intel Box it crashes at  take a look at the pic.  This motherboard does not have ache so I added ataport ache etc kexts to the other folder which does not help.
 
Some have had success with optiplex 745 no ache also but mine keeps crashing I think I'm missing a plugin or edit it does not like my smbios 10,1 either,
 
 
Help,
sonicman66

 

 

 

Kind Sir I really need your help I have a intel 945GCNL I know its old but I want to use it as media center with mini4.1 in the end. but all it does is crash.  I finally have it installed via my optiplex 760M/T but as soon as I place it in the intel Box it crashes at  take a look at the pic.  This motherboard does not have ache so I added ataport ache etc kexts to the other folder which does not help.
 
Some have had success with optiplex 745 no ache also but mine keeps crashing I think I'm missing a plugin or edit it does not like my smbios 10,1 either,
 
 
Help,
sonicman66

 

Did not work either,

 

snakeman

Share this post


Link to post
Share on other sites

try

attachicon.gifCLOVER.zip

check PM after reboot, if Clover dont generate a good one, use ssdt

ur USB3 not intel, u have a usb3 texas Intruments and ASMEDIA too, into device PEX1 and PEX2

U need try a UsbGeneric kext

Check

attachicon.gifxuzhin.zip

Use new DSDT, check in config.plist Generate P and C States

sorry, i dont remember, many ppl every day

thanks i'll look for the kexts. but how do i generate p and c states?

Share this post


Link to post
Share on other sites

here

attachicon.gifCaptura de Tela 2017-12-15 às 16.40.37.png

if dont generate good PM

use ssdt

Run it

attachicon.gifSSDT_Automator.zip

 

Lan work?

havent restarted yet, but i replaced the dsdt file with the new one and placed the kext in my kext others folder. attached is the power management folder that was created. oh and generate c and p states was already checked according to clover cofigurator. i have to run meet some friends now, will let you know tomorrow if this fixed usb3 and lan, thanks for investing so much time in helping me.

Power_Management.zip

Share this post


Link to post
Share on other sites

havent restarted yet, but i replaced the dsdt file with the new one and placed the kext in my kext others folder. attached is the power management folder that was created. oh and generate c and p states was already checked according to clover cofigurator. i have to run meet some friends now, will let you know tomorrow if this fixed usb3 and lan, thanks for investing so much time in helping me.

pout ssdt.aml in same folder with dsdt

clover/acpi/patched

Thank's , works fine : I can watch Primevideo  with HDMi on my 4K TV : nice job.

;)

Share this post


Link to post
Share on other sites

ok, here it is:https://www.dropbox.com/s/qdu2e39zqhfk3td/Cristian%E2%80%99s%20Mac%20Pro%20ioreg.ioreg?dl=0

 

I've extracted it through File -> Save as . Is it right?

 

Thanks you

look good

run geekbench and check ur score

try it for check frequencies, etc

Intel® Power Gadget SIERRA.zip

Share this post


Link to post
Share on other sites

Awesome, thanks you for all. Ran the tools, and everything looks good, but I've noticed that the cpu frequency I always at the max(3,7 GHz), is it normal?

 

Thanks you again. :)

No

Use Ssdt for ur processor and native PM

Share this post


Link to post
Share on other sites

No

Use Ssdt for ur processor and native PM

Are you good even with the ssdt as u are with dsdt? Anyway, with the patch fo the cpu and the PM cannot be done even with the dsdt? Or am I wrong.

 

Thanks you

Share this post


Link to post
Share on other sites

use ssdt only for cpu PM

 

use my DSDT + SSDT Pike

 

run it and put ssdt.aml in same folder, Clover/Acpi/patched

attachicon.gifSSDT_Automator.zip

Awesome, thank you, will try. But could your ssdt work for my cpu? Does a wrong patched DSTS ot SSDT could harm my pc hw components?

 

Thanks you

Share this post


Link to post
Share on other sites

Awesome, thank you, will try. But could your ssdt work for my cpu? Does a wrong patched DSTS ot SSDT could harm my pc hw components?

 

Thanks you

No problem if u have correct patches and SSDT by Pike

Share this post


Link to post
Share on other sites

No problem if u have correct patches and SSDT by Pike

ok, I've created the SSDT with the Automator and put it in the Clover -> ACPI -> Patched, but when I check the frequency, it still remain at the max freq (3,7 GHz). Any advice? Below there is the ssdt.aml file, if you can give it a look, or just give me some advice on how to correct it.

 

https://www.dropbox.com/s/jv45eu19woluz69/SSDT.aml?dl=0

 

Thank you

Share this post


Link to post
Share on other sites

u use Yosemite?  :w00t:

yes, I've told you that I successfully installed Yosemite instead of Sierra. When I first asked you if you could create for me a patched DSDT even if I use Yosemite, if you remember. I know this is the wrong thread, but what do you say about the SSDT file?

 

P.S. 

I've also finally successfully installed Sierra 10.12.6 on my system, but this is another story, and I'm still having some problem on it with the usb ports. Anyway, I think I'll stay on Yosemite for a while.

 

Thanks you

Share this post


Link to post
Share on other sites

u need check Guide for nativePM in ur processor, i think have a good guide here in forum

 

for sierra u can use dsdt + usbinjectall, but ur usb3 is not intel, if dont work with genericusb kext...is a problem

Share this post


Link to post
Share on other sites

u need check Guide for nativePM in ur processor, i think have a good guide here in forum

ok, I'll check it out. Hope there is something useful.

 

for sierra u can use dsdt + usbinjectall, but ur usb3 is not intel, if dont work with genericusb kext...is a problem

Already tried with the usbinjectall, still have to try with patched dsdt. Anyway It's strange, bevause my only onboard usb3 work, the others port( all 2.0 ) doesn't work Anyway, we'll see what will come out.

 

Thanks you :)

Share this post


Link to post
Share on other sites

u need check Guide for nativePM in ur processor, i think have a good guide here in forum

 

for sierra u can use dsdt + usbinjectall, but ur usb3 is not intel, if dont work with genericusb kext...is a problem

Sorry man, I have one more question. When I generate the ssdt.aml file with the automator, the is one string that tell: "Warning: 'system-type' may be set improperly (1 instead of 3)".  What does it mean, how can I swith my 'system-type' from 1 to 3. Maybe this is the problem why the file didn't worked. :|

 

What do you think?

 

Thanks you

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By simras
      Hello,

      I am trying to make a new Hackintosh under 10.13 with this specs:
      i7 6800K,
      Asus X99-E
      Asus GTX 970

      But the problem is that I can't pass those errors :
      - couldn't allocate runtime area
      - end randomseed ++++++++++++++ _

      I have always passed this thing on all hackintoshs that I have done, but here, impossible.

      Tried those tests :
      - AptioMemoryFix alone,
      - AptioMemoryFix with EmuVariableUefi and RC Scripts,
      - OsxAptioFix2Drv-free2000 with EmuVariableUefi and RC Scripts,
      - Test2-2016.efi with OsxAptioFixDrv, EmuVariableUefi and RC Scripts,
      - Test2-2016.efi with OsxAptioFix2Drv, EmuVariableUefi and RC Scripts,
      - Test2-2016.efi with OsxAptioFix2Drv, OsxAptioFixDrv, EmuVariableUefi and RC Scripts,
      - Test2.efi with OsxAptioFixDrv, EmuVariableUefi and RC Scripts,
      - Test2.efi with OsxAptioFix2Drv, EmuVariableUefi and RC Scripts,
      - Test2.efi with OsxAptioFix2Drv, OsxAptioFixDrv, EmuVariableUefi and RC Scripts.

      I have tried all this with npci=0x3000 that I have never used before instead of npci=0x2000

      I have done an Hackintosh on Asus X99 Deluxe II and it pass with AptioMemoryFix with EmuVariableUefi and RC Scripts....

      I have tried to reset NVRAM with F11.

      I have tried with 1 RAM stick that I have indicate in the SMBIOS :
      https://hackintosher.com/forums/thread/mapping-ram-and-dimm-slots-on-a-hackintosh-with-clover-smbios.365/
       
      I have follow KGP guide for X99 :
       
      The BIOS settings are exactly the same.

      I link my CLOVER folder.

      Thank you.
      CLOVER.zip
    • By tonyx86
      I was inspired by @duduclx post for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5.  Everything works perfectly (including sleep with the solution described later in this thread).  I'm starting this thread hoping to help others install Mojave on their E6410s.  This thread is not currently intended to be an installation guide and is better suited to the intermediate/advanced hackintosher.  Eventually, it may evolve into a guide.
       
      I started with this thread and ended up with the system captured in the attached files.  The keys were to change the LPCB._DSM.Name to "3b09" and remove all CLOVER configs not necessary for Mojave, plus some other items mentioned below.
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.6 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 5, not the original version), USBInjectAll (with custom SSDT-UIAC) Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961  
      Configuration items that may be different from what you have seen in other E6410 configurations
      LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads  No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)  
      What is NOT working:
      Sleep is not working with the files attached to this first post, but I have found the solution for sleep/wake.  Read Known Issues below. Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings.  The slider appears in Display settings (because of the backlight DSDT injection in AGP.VID._DSM), but the slider doesn't work (yet).  Haven't spent time to figure this out, but would love help. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
        What is NOT tested:
      SD Card Slot Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS)  
      What IS working:
      Everything else not mentioned above.   Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar).  Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP.  Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: here) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter) Camera  
      Known issues and their solutions
      AAPL,clock-id and device_type do not appear in IORegistry for EHC1.  Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2.  This has been completed and tested, but does not fix the sleep behavior.  This fix is not reflected in the attached files. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used.  Switching to the "Refined ALPS TouchPad driver" is a big improvement.  I've implemented and tested this on my system.  The ALPS version of VoodooPS2Controller.kext mixes up a few keys.  Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European.  The updated VoodooPS2Controller.kext is not reflected in the attached files. This proposed configuration uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load.  While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m).  This AGPM method is discussed later in this thread.  I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior and have not updated attached files to reflect this change. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer).  It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra.  If I "Inject NVidia" via CLOVER, IOHWControl loads properly.  I have made this change and am testing it on my system, but have not updated the attached configuration files. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT).  In the method, the expression  If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS.  I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS.  While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17.  Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The DSDT patch that duduclx refers to as "Intel GMA Ready" in his El Capitan Guide is not applied correctly to the DSDT attached to this post.  Somehow, the contents of patched _DSM are located in the PCI0.VID device instead of in Method (_DSM) within the PCI0.VID device.  MaciASL didn't complain about this, so it went unnoticed, but it doesn't appear to have had any affect.  I have completely removed this "Intel GMA Ready" patch from my DSDT since it is not necessary for Dell Latitude E6410's with NVidia 3100m, but have not updated the attached DSDT. The assigned value of ACOS in the DSDT is conditional on the operating system.  There is no condition for "Darwin."  The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc), analogous to the assignment of OSYS.  I made this change in my DSDT (not yet reflected in the attached files), but have not observed any behavioral differences (sleep or otherwise).  EDIT: Another way to handle this might be to override _OSI with XOSI (defined in a custom SSDT).  Still learning about XOSI and haven't yet drawn a conclusion.  I'm currently experimenting with ACOS and OSYS equivalent to Win7 and Linux (manually patched in my DSDT which has not yet been updated as a new attachment to this post). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port.  I believe that this should be an internal USB port (portType=2).  My custom SSDT-UIAC.dsl is wrong.  I just learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs.  The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15.  I have not attached an updated SSDT-UIAC.aml to this first post, but my current EFI includes an updated SSDT-UIAC.aml with ports HP15, 16 17 and 18 set to internal (portType = 2).  This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working. There are minor differences between a real MacBookPro6,2 IORegistry dump and this HackBookPro6,2 IORegistry dump that can be resolved with simple DSDT edits.  I am now running with these changes, but haven't found these changes to make any difference in operational behavior.  These changes are not reflected in the attached DSDT.
      Rename Device (AC) -> Device (ADP1) Remove UID from Device (HPET) Add compatible ID "PNP0C01" to Device (HPET) Change ADP1:_STA from 0x0F to 0xFFFFFFFF Enable Ambient Light Sensor and renamed to Device (ALS0) from Device (ALS) Add compatible ID "smc-als" to ALS0 Rename LID -> LID0 Change "name" definitions to Buffers in _DSM methods Rename Device (PBTN) to PWRB Rename Device (SBTN) to (SLPB) Change HDAU.hda-gfx from "onboard-1" to "onboard-2" Change GFX0.hda-gfx from "onboard-1" to "onboard-2" Sleep / Wake does not work with the basic DSDT edits.  I have discovered that Sleep / Wake can be made to work by adding discrete graphics _OFF() and _ON() methods to _PTS and _WAK methods respectively (borrowed the concept and code from a working E6430 DSDT: Credit here: https://osxlatitude.com/forums/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/page/6/.  I currently have sleep working on my Latitude E6410 and am continuing to test it.  The solution is documented later in this thread, but files are not yet attached to this first post.  
      Brief Installation Guide (for the experienced Hackintosher):
      Follow duduclx's guide for BIOS config Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD.  When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext.  Also, do not install the DosDude SIP kext (you're using CLOVER to manage SIP). Install the following kexts in /Library/Extensions:  ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original) Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys).  Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z

      CLOVER.zip
    • By DerNuntius
      Hi,
       
      Finally I finished the installation of 10.14.6 on my Dell E5440. Everything works just fine, but HDMI will not work. Every time I plug it in, it causes a grey screen on my laptop monitor. Also on boot up. I attached my EFI Folder, maybe someone can help me. I searched a bit and read something about Azul Framebuffer Kext.
       
      Thank you for helping.
      Greedings,
      Hugo
       
       
      CLOVER.zip
    • By benmills1
      Hi, i can someone help me with installing mac OS Mojave on my HP ENVY - 15-as102na?
      I have an imac to use for setting up my usb & installing MacOS Mojave.There are various kext files etc that i'm not sure about and need some help as some are hardware specific.
      I tried previously but got stuck on an apple logo and couldn't get past that, and tried today and had problems with Clover.
      Once i get mac os on my 128gb m.2 ssd ( which i'll upgrade to either a 256gb or 512gb depending on how well this hackintosh works)
      I have a free 2.5" inch hdd bay where i'd like to install windows on in the future.
      I think i may have to replace my wireless card ( based on a few google results) which i'm fine with as long as i can see it working without just so i know i won't waste money
      Specs:
      Cpu: i5 7200u
      GPU: HD 620
      8GB ram
      Wifi card- Intel Wireless 7265 ( Intel® 802.11ac (2x2) )
      Motherboard - HP 81D2 & BIOS version is f.56
      https://support.hp.com/gb-en/document/c05311862
      Thanks
×