Jump to content
MaLd0n

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,448 posts in this topic

Recommended Posts

Generate P and C States was already active on clover when I exported the ioreg file.

what ur processor?

Can you give me some advice on which test should I do in this case? I used all my hackintosh knowledge and tried pretty much everything I know.

You're my last chance  ^_^

 

Thanks

bro, put signature with ur hardware, i don't remember, is many ppl every hour

Share this post


Link to post
Share on other sites
Advertisement

maldon sir, my AMD radeon HD 7650M is not getting enabled !

i think not work, radeon mobile, but u can check in search forum 

I had a fully working build up until 10.13.2. Now, if I shutdown the macOS, it just reboots.

Neither 

<key>FixShutdown</key>
<true/>

nor

<key>HaltEnabler</key>
<true/>

did help. Did something change with the latest macOS version with interpreting ACPI?

Hey

What ur hardware, Smolderas

it's a i5 3330

generate ur SSDT

SSDT_Automator.zip

put in Clover/Acpi/Patched

Share this post


Link to post
Share on other sites

i think not work, radeon mobile, but u can check in search forum 

Hey

What ur hardware, Smolderas

Hey MaLd0n,

 

I though I had 'em in my profile.

My hardware is:

- i7-2600k @4.4GHz

- ga-z68x-ud5-b3 @F10 BIOS

 

Here is my patched DSDT: https://www.dropbox.com/s/02jspiwob3q8a22/DSDT.aml?dl=0

 

and SSDT for my overclock: https://www.dropbox.com/s/cfu4emlagrhpw80/SSDT.aml?dl=0

 

 

And I'm using clover to patch DSDT (I think it was for USB, I don't remember anymore).

Here are the clover patches:

<key>Patches</key>
			<array>
				<dict>
					<key>Find</key>
					<data>RUhDMQ==</data>
					<key>Replace</key>
					<data>RUgwMQ==</data>
				</dict>
				<dict>
					<key>Find</key>
					<data>RUhDMg==</data>
					<key>Replace</key>
					<data>RUgwMg==</data>
				</dict>
			</array>

Share this post


Link to post
Share on other sites

 

Hey MaLd0n,

 

I though I had 'em in my profile.

My hardware is:

- i7-2600k @4.4GHz

- ga-z68x-ud5-b3 @F10 BIOS

 

Here is my patched DSDT: https://www.dropbox.com/s/02jspiwob3q8a22/DSDT.aml?dl=0

 

and SSDT for my overclock: https://www.dropbox.com/s/cfu4emlagrhpw80/SSDT.aml?dl=0

 

 

And I'm using clover to patch DSDT (I think it was for USB, I don't remember anymore).

Here are the clover patches:

<key>Patches</key>
			<array>
				<dict>
					<key>Find</key>
					<data>RUhDMQ==</data>
					<key>Replace</key>
					<data>RUgwMQ==</data>
				</dict>
				<dict>
					<key>Find</key>
					<data>RUhDMg==</data>
					<key>Replace</key>
					<data>RUgwMg==</data>
				</dict>
			</array>

try

DSDT. smolderas.zip

Share this post


Link to post
Share on other sites

Sadly I got prohibition sign at boot and got stuck there. Nothing particular in verbose messages. Right after waiting on dsmos or something.

use O key in Clover boot screen, Acpi Patching, dsdt name put dsdt02.aml

 

send me ur full clover folder and original dsdt

that means that CPUPM is working right?, bro I've noticed you has a Asus h61m-a, maybe is similar to mine (H61M-K), I want to ask you why I can't pair two 4GB DDR3 modules, work one or another but not both at same time, what can be wrong here?.

 

Thanks you..

or ur memory die or is a old problem in many mobos, Operation Region Variations

u can try a Fix Regions in Clover

Share this post


Link to post
Share on other sites

use O key in Clover boot screen, Acpi Patching, dsdt name put dsdt02.aml

 

send me ur full clover folder and original dsdt

or ur memory die or is a old problem in many mobos, Operation Region Variations

u can try a Fix Regions in Clover

Sorry if I insist. Have you got any idea for my problem. I have updated the signature with my desktop hw specs.

 

Thanks you very much

Share this post


Link to post
Share on other sites

use O key in Clover boot screen, Acpi Patching, dsdt name put dsdt02.aml

 

send me ur full clover folder and original dsdt

or ur memory die or is a old problem in many mobos, Operation Region Variations

u can try a Fix Regions in Clover

I don't get you, sorry. Should I put your DSDT file and rename it via clover?

What file or config do you need explicitly?

My original DSDT is here: https://www.dropbox.com/s/02jspiwob3q8a22/DSDT.aml?dl=0

Share this post


Link to post
Share on other sites

I don't get you, sorry. Should I put your DSDT file and rename it via clover?

What file or config do you need explicitly?

My original DSDT is here: https://www.dropbox.com/s/02jspiwob3q8a22/DSDT.aml?dl=0

try, is a ur old dsdt with other shutdown patch, many old mobos need it, simple shutdown dont work

DSDT.aml.zip

Share this post


Link to post
Share on other sites

try, is a ur old dsdt with other shutdown patch, many old mobos need it, simple shutdown dont work

attachicon.gifDSDT.aml.zip

Thanks, but up until 10.13.2 update, I could shutdown OK, without any changes in config or patches in DSDT...

I'll try your new DSDT and report back.

Share this post


Link to post
Share on other sites

with you clover folder, I got stuck on another row. Something about Appleusbxhci as you can see in the image, then the screen crash again. Any idea? If I upload you my clover folder, maybe you can give it a look. How do you suggest to proceed?

 

https://www.dropbox.com/s/zwl4pyzn5l8q9o7/IMG_20171211_220438_HDR.jpg?dl=0

 

Thanks you

Share this post


Link to post
Share on other sites

U need a VoodooTscSync

with you clover folder, I got stuck on another row. Something about Appleusbxhci as you can see in the image, then the screen crash again. Any idea? If I upload you my clover folder, maybe you can give it a look. How do you suggest to proceed?

 

https://www.dropbox.com/s/zwl4pyzn5l8q9o7/IMG_20171211_220438_HDR.jpg?dl=0

 

Thanks you

Share this post


Link to post
Share on other sites

U need a VoodooTscSync

ok, there is one in particular I should use in my case, or it is universal for all hw type? Should I use also GenericUSBXHCI.kext, or it is not necessary?

 

Thx u

Share this post


Link to post
Share on other sites

ok, there is one in particular I should use in my case, or it is universal for all hw type? Should I use also GenericUSBXHCI.kext, or it is not necessary?

 

Thx u

How many cores ur processor have?

 

I think u need generic usb, yes

Share this post


Link to post
Share on other sites

fine tune done? 

send me dsdt, need some patches

 

no, not at all. i really need to get my ethernet and my usb3 slots to work. so i f4'd at clover boot up and got the dsdt file off the origin folder on my boot stick, i hope this is what you meant:

DSDT.zip

Share this post


Link to post
Share on other sites

How many cores ur processor have?

 

I think u need generic usb, yes

ok I got the vodootscsync(4 cores, like my cpu) in the kext folder, and it stuck here ( https://www.dropbox.com/s/wps6ted2cpzfewd/IMG_20171211_223617_HDR.jpg?dl=0) .

Instead if I add also the generic usb kext, it stuck here ( https://www.dropbox.com/s/et2r2gy8me7ybd6/IMG_20171210_150012_HDR.jpg?dl=0) , like before.

 

What do you say?

Share this post


Link to post
Share on other sites

Hello ,

 

i have strange issue since clean install 10.13.2.

- Sleep problem

- CPU speed not OK with clover 4334

- CPU speed seems about to work with clover 4243

- Had extract SSDT and DSDT with patchmatic

 

If those attach files could tell you about my hack ( Msi H81M-E33 Pentium G3460 3,5 Ghz- 8 GB ram - Radeon rx 460 OC 2 GB - DREVO X1 SSD 120 Go )

post-1879825-0-82353200-1513028655_thumb.png

post-1879825-0-07349600-1513028807_thumb.png

Loloflat6 CLOVER.zip

Loloflat6 legacy_boot.log.zip

Share this post


Link to post
Share on other sites

ok I got the vodootscsync(4 cores, like my cpu) in the kext folder, and it stuck here ( https://www.dropbox.com/s/wps6ted2cpzfewd/IMG_20171211_223617_HDR.jpg?dl=0) .

Instead if I add also the generic usb kext, it stuck here ( https://www.dropbox.com/s/et2r2gy8me7ybd6/IMG_20171210_150012_HDR.jpg?dl=0) , like before.

 

What do you say?

ur processaor have 8 core, use voodootscsync = 7

Hello ,

 

i have strange issue since clean install 10.13.2.

- Sleep problem

- CPU speed not OK with clover 4334

- CPU speed seems about to work with clover 4243

- Had extract SSDT and DSDT with patchmatic

 

If those attach files could tell you about my hack ( Msi H81M-E33 Pentium G3460 3,5 Ghz- 8 GB ram - Radeon rx 460 OC 2 GB - DREVO X1 SSD 120 Go )

try

Loloflat6 CLOVER.zip

Share this post


Link to post
Share on other sites

ur processaor have 8 core, use voodootscsync = 7

try

attachicon.gifLoloflat6 CLOVER.zip

hmm It's strange, on the Intel website, It's written that my cpu have 4 core. Maybe the threads are 8, but the cores are 4. Anyway, I'll try even with the 8 core vodooo kext.

For the bootflag I've used this ''IOCPUNumber=7'', or I have to use ''vodoootscsync=7''. Which one is correct?

 

Thx you

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By shinho73
      I have Sierra 10.12.6 on A8 7600. Whenever the USB is inserted, the screen freezes. Without USB, no issues. Also, having power off and reboot issue. The monitor turns off, but the pc fan stays on. Any help will be greatly appreciated. Thank you. 
       
       
       
       

    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI CLOVER Z390 DESIGNARE.zip
       
      ---OPENCORE FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI OPENCORE Z390 DESIGNARE.zip
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app

      https://www.youtube.com/watch?v=k9wmIfGLe3A
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By fusion71au
      Clover r5051 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r5051 for VMware.zip". Mount Clover-v2.5k-5051-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By shinho73
      Hello everyone. I managed to install AMD Sierra V5(10.12.6) on my old AMD A8 7600 PC(Mother Board-A58M-E, GPU- Palit Geforce GT730 DDR3). Everything is working except the GPU. The GT730 DDR3 GF108 is natively supported on Sierra, but for some reason, it is not working. On Clover Config, "Inject Nvidia" is selected, no Nvidia Web, and nv_disable=1. On "About This Mac" it just says " NVIDIA Chip Model 3 MB".
      I have attached config.plist. Can someone look at it please? Any help will be greatly appreciated. Thank you. 





      config.plist
×