Jump to content
MaLd0n

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,490 posts in this topic

Recommended Posts

Advertisement

Do I use the Clover folder you sent me for the Sierra install (on the USB), but replace the DSDT with the one you sent me that works?

 

The screenshot you took of the Clover Screen.  What is checked to install inside of the "Drivers64UEFI"  Option?  In the past I have just used OsxAptioFix2Drv-64

Share this post


Link to post
Share on other sites

after install Sierra

Install Clover with options above, dont need check in drivers, my folder have all u need, just replace

http://www.insanelymac.com/forum/topic/323052-sierra-on-intel-5-6-7-8-9-and-10-chipset-series-nehalem-sandybridge-ivybridge-haswell-skylake/?p=2413230


if u have problem, use same folder but changed DSDT, use it

http://www.insanelymac.com/forum/topic/323052-sierra-on-intel-5-6-7-8-9-and-10-chipset-series-nehalem-sandybridge-ivybridge-haswell-skylake/?p=2413304

but use only if u have problem, all u need have inside Clover folder

Share this post


Link to post
Share on other sites

Hey hey,

 

Mind lending me a hand with my DSDT / checking it over?

 

Changes made to the DSDT:

- Injected layout-id (probably incorrectly as I still need the HDAEnabler)

- Fixed codepaths not returning a value by appending return (Zero)

- Removed random Arg0 after a return statement causing an unexpected end of file

- Fixed possible timeout error by changing 0x0FFF to 0xFFFF

- Removed unused locals

- Removed 20+ lines of Zero repeated

 

The SSDT.aml is the output from the latest version of ssdtPRGen.sh.

 

System: Dell Inspiron 3847

Graphics card: r9 270

CPU: i5-4440

Memory: 8gb

SSD: 1x Samsung Pro

HDD: 1x WD Black 3tib

Lan: RTL8168G / 8111G via Realtek8111.kext

Audio: ALC662v2 via AppleALC.kext

 

Links:

System specs (for reference): https://downloads.dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/inspiron-3847-desktop_reference%20guide_en-us.pdf

IOReg: https://mega.nz/#!lNpiUYJB!XlaNWUyYgacLCsbSKMfBQLebihFHYbexzl9PchV2kvs

App output: https://mega.nz/#!xdoXkSqb!HXgXo1M13QuhppHfZs5eBPODlM0UHzRYMzl_Z2U0-4g

Clover: https://mega.nz/#!5RQwlLZI!8_HBy9jqLCh7RJPr_wF3yErUgVQ97yrqI-3jjWII7Y0

Share this post


Link to post
Share on other sites

System: Dell Inspiron 3847

CLOVER.zip

for Alc662 u can try id 5, 7, 11 and 12, if dont work native, u need a AppleHdaPatcher, yes!

MaLd0n, wow, wow and more Wow.

 

Everything under 10.12.4 works like a complete charm, and the rig is smoking fast in booting up.

 

So Smoooooooth!

 

Thank you ever so much.

Welcome!

Enjoy!

Share this post


Link to post
Share on other sites

attachicon.gifCLOVER.zip

for Alc662 u can try id 5, 7, 11 and 12, if dont work native, u need a AppleHdaPatcher, yes!

Welcome!

Enjoy!

 

Wow! I am floored by how much of a change a proper DSDT / clover configuration can make. I can't test HDMI audio out unfortunately so I can't comment on if that's working or not. The audio is working just fine without the hda enabler loading. The only issue I have left to fix on my system is the graphics not waking from boot, but that's a known AMD issue from the looks of it on <= 10.11.

 

Thanks a lot for taking a look at my setup MaLd0n!

 

Edit:

 

Looking at hwmonitor from rehabman / fakesmc it looks like only drive temps and ssd life remaining is showing. It use to include fan speeds, temps, etc. This could be due to my ssdt changes from earlier. Should I try adding the other ssdt-# files into my patched folder (after fixing any errors of course)?

Edited by FFForever

Share this post


Link to post
Share on other sites

fakesmc sensors cause many problems in many cases, but if u can test use it

Just replace in Clover/Kexts/Other

attachicon.gifFakeSMC.SENSORS.zip

and Check with HWMonitor

attachicon.gifHWMonitor.app.zip

 

Ah. I was using hwmonitor as a way to test speedsteping / monitor temperatures. Do you have a recommendation on something else to use?

 

I noticed in my verbose boot output I have ACPI errors relating GPX0 with a note on AE_NOT_FOUND. I tried searching console for ACPI, and found nothing. Is there a log file I can check to get the exact error?

Share this post


Link to post
Share on other sites

it is common to see these in 10.12 with this new version of AppleACPIPlatform.kext. Older versions of OS X didn't do checks like this. ;)

 

Check ur speedstep use IGP

attachicon.gifIntel® Power Gadget SIERRA.zip

 

Send me new ioreg

attachicon.gifIORegistryExplorer 3.app.zip

 

ioreg: https://mega.nz/#!xUxHVDaT!G3mHO3-sE8zHz3dZ1NmWMOjarLipUAxYFDXCb4mC-W0

 

Does this look like it's stepping correctly? Even with a 90%+ idle system it's still hovering around the max frequency with minor drops.

 

f9jiWRb.png

Share this post


Link to post
Share on other sites

generate NEW SSDT PM with Pike script

attachicon.gifssdtPRGen.command.zip

replace SSDT

run it

attachicon.gifOlarila.command.zip

reboot

 

Check again

 

Looks like it's still favoring the high frequency. I've attached ~/library/ssdtprgen's content, the ACPI folder contains the original ssdt/acpi, and the patched dsdt. It was complaining that they didn't exist so I copied them in, and ran it again.

 

Should I ignore the error, and run it again with the files deleted?

 

ssdtPRGen: https://mega.nz/#!EM5FWIpT!mxugJtnLgR8pNwcGZyF4CFXMaIjg_Z5rvKYS2eJN_Qk

 

MtDnJpn.png

Share this post


Link to post
Share on other sites

test it, just replace

attachicon.gifconfig.plist.zip

let me know

 

need sleep now, 2:50am, tomorrow we check it

 

Good Nit!

 

Thanks again for all of your help last night :).

 

The new config doesn't seem to change the speedstepping. Even with idle loads I'm still seeing the same frequencies for the most part.

Share this post


Link to post
Share on other sites

very strange

take a test with Clover PM

Remove SSDT and replace config.plist

attachicon.gifconfig.plist.zip

 

Hmm it still doesn't appear to be stepping correctly. Should I try clearing the nvram? 

 

I checked the power widget in Windows (and recorded a log) to verify speed stepping is working correctly / there's no MSR lock.

 

PwrData csv: https://mega.nz/#!IchWTYKB!K-bDnOC0UjIUEjR04PLy-vp2JEY71EZgYOy1zidSB1Y

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By cixque
      CLOVER.zipCLOVER.zipDell Venue 11 Pro 7140
      ------------
      Specification
       
       
      Intel Core M 5Y71
       
      Intel HD Graphics 5300
       
      Intel Broadwell-U motherboard
       
      8GB Ram
       
      256GB SSD
       
      Dell DW1850e WWAN + GNSS GPS
       
      Intel Wireless 7265 + Intel Bluetooth
       
      NFC
       
       
      …..
       
       
       
       
       
      Mojave 10.14.6
       
      What works
      Native Power Manager (Generate Plugin type) Full Graphics with QE/CL Brightness (Add PNLF in Config.plist or DSDT Patch) — (Brightness slide bar) Touch Screen, and Pen (DSDT Patch + Voodoo I2C, I2CHID satellite KEXT) HDMI output with hot plug (Lilu + WhateverGreen) HDMI Audio with hot plug (Lilu + AppleALC) no Layout-id needed Front and Rear Cameras MicroSD slot - O2 Micro (I use Adding Arbitrary under Devices in Config file Method) Ref, Post #6 by Jake Jo https://osxlatitude.com/forums/topic/7346-applesdxc-driverdsdt-patch-for-o2-micro-sd-card-readers/ Battery Indicator (ACPIbattery by Rehabman) ——>To utilise both battery, SSDT (by Rehabman) is needed in order to combine 2 batteries as one.
      Travel Keyboard Dell K12a001 (USBinjectall KEXT) Native Keyboard keys (Brightness, volume keys) WWAN card Dell DW1850e (OOB) Bluetooth -------------------
       
      What doesn’t work
       
       
      Sleep Wake — I have no idea how to fix it as it is required DSDT patch I guess. GPS NFC Audio ---> Realtek I2S Audio (PG0.35 for DELL)
       
      In DSDT entries is HDAUDIO\\FUNC_01&VEN_10EC&DEV_0282&SUBSYS_00000000&REV_1000\ Which indicates ALC282
       
      Audio ALC3263 (As it shown in BIOS) - Broadwell rt286 - Card1/Codec#0 (Utilised in I2S Mode) there is nowhere in BIOS to change to HDA mode). Drop OEM HDA and Fix HDA don’t do anything, still show 3 HDMI Audio outputs. If there is a DSDT patch to force HDA Audio mode, Please do enlighten me.
      As a result Internal Speaker, Internal Mic, and Headphone Jack doesn’t work.
       
      Touchpad on Travel Keyboard Dell K12a001 (Should work with DSDT Patch with pin configuration) I have no idea how. Obviously, Intel Wireless 7265 AC. For experimental purpose. https://github.com/daliansky/XiaoMi-Pro-Hackintosh/issues/330 — Knock yourself out. I managed to get it work for awhile but the real problem is kernel panic so I gave up. Ordering compatible card instead. ------------------
       
      Config.plist got it from Rehabman laptop config.
       
       
      BIOS version A20
       
      Enable:
       
      - Legacy Boot Rom
       
      Disable:
       
      - Secure Boot
       
      - TPM 2.0
       
      - Vt-d
       
      ------------
       
      SMBIOS - I use MacBook8,1. —- MacBookAir7,1-7,2 (Min Freq is at 1.2 GHz) MacBookPro12,1 Min Freq is at 800 Mhz and it is the default this cpu should be. Again, there is a way to set it right somewhere in this forum.
       
      ------------
       
      -->> DSDT Windows 8 patch
       
      System sees only one I2C Controller which control Touch Screen.
      Touch Screen registers as Magic Trackpad 2.
      Pen as Mouse
       
      -->> DSDT Windows 8.1 Patch
       
      System sees two I2C Controllers which control Touch Screen and Accelerometer.
      Touch Screen registers as Magic Trackpad 2.
      Pen as Mouse
       
      OOO>>> With Windows 8.1 patch which it should run with this one because it can see more of HID devices and controllers.
       
      Problem is Accelerometer (SHUB).
      Device can automatically rotate screen as it should be BUT it flips the screen wildly even with slightly movement. It stops only when device stays completely still. Eventually it breaks internal screen graphic. It becomes grabble. I restored internal screen graphic by connecting it to external monitor and set rotation of external screen to 0 degree. Then it is back to normal. (I guess it conflict with rotation setting) I disable SHUB in DSDT.
       
      ---------------------
       
      During Installation process Full Graphic acceleration can be activated straight away by Lilu and Whatevergreen. AppStore, iMessage and, FaceTime activate by NullEthernet and SSDT by Rehabman USBInjectAll needed for keyboard and other usb peripherals. Use other tool to keep certain ports active as Rehabman mention this KEXT is not good for a long run. Please do Correct me if I did something worng. Or any suggestions to make this thing runs better.
      CLOVER.zip
      IOReg_SysReport.zip
    • By kushwavez
      A really good motherboard with macOS compatible bult-in Wifi & Bluetooth

      ASUS Z170-Deluxe (with Wifi)
      BIOS: v3801
      CPU: i7-6700K 4.0 to 4.2 GHz (w/o OC)
      RAM: 1x 16 GB Corsair DDR4 2400 MHz
      GPU: Intel HD 530 (Headless) & ASUS Radeon RX 5700 OC 8 GB
      Audio: ALC 1150
      Ethernet: I219V2, I211-AT
      WiFi & Bluetooth: Broadcom BCM94360HMB Half-Mini-PCI-E
      More Specs: https://www.asus.com/Motherboards/Z170-DELUXE/specifications/
       
      Catalina 10.15.4 - Windows 10
      What is working:
      BCM94360HMB Wifi and Bluetooth AirDrop, Handoff, FaceTime, Messages, App Store, iCloud, etc. Intel HD 530 (QE/CI tested, but now I'm using it in headless) Sleep RX 5700 (QE/CI with 2 1080p monitors connected) Sound USB Ports Two Ethernet ports macOS with a light OC (4.12 GHz - 4.5 Ghz, XMP, ASUS optimal) No problem so far ASUS HyperKit with a KINGSTON NVMe SSD - 250 GB  
      What is not working:
      -  
       
      Not tested:
      VideoProc says that Hardware Decoding\Encoding is fully supported and enabled on both HD 530 and RX 5700 but I didn't test it Thunderbolt (no equipment)  
      Issues:
      None  
      BIOS Settings:
      Boot\CSM (Compatibility Support Module): Launch CSM: Disabled Boot\Secure Boot: OS type: Other OS Secure Boot State: Disabled Advanced\System agent (sa) Configuration: VT-d: Enabled Graphics Configuration: Primary Display: Auto iGPU Multi-monitor: Enabled RC6(Render Standby): Enabled DVMT Pre-Allocated: 128M Advanced\PCH Storage Configuration: SATA Mode Selection: AHCI HyperKit: Enable (if you have NVMe SSD with ASUS HyperKit) Advanced\CPU Configuration: Intel Virtualization Technology: Enabled CPU- Power Management Control: Intel SpeedStep: Enabled CPU- C-States: Enabled Intel SpeedShift: Enabled  
      Getting ready for installation:
      Download the bootpack (Clover v5107): Click here -> asus-z170_clover_5107.zip  
      Installation:
      Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager) Copy my Clover folder to the USB's EFI folder Boot with the Installer USB If you have any problem (kp or freeze) boot with config_debug.plist to see what causes the issue  
      Post Installation:
      Download Clover Configurator and generate a new Serial Number for yourself  
      Some pictures:
       

       




       
       
       
      Catalina & Windows 10 Dual-Boot (clean install, on one drive):
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac)
       Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart
      Boot into your Win installer, Format the partition you created for Win, install. 
      Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: 
      bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi  
      You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)  
      Mounting EFI from Windows:
      Open cmd in administrator mode and type: mountvol b: /s (This will mount your EFI) Open Total Commander or Explorer++ in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI)  
      Notes:
       
      2020.03.26: Updated to 10.15.4 -> Updated WhateverGreen, Lilu -> Updated Clover to v5107
      2020.03.23: Removed "EmuVariableUefi.efi" -> deleted, caused false nvram map, now it's native, updated Clover to v5106
      2020.02.11: Updated to 10.15.3 -> No problem when/after installing
      2020.01.19: Added ASUS HyperKit NVMe SSD to the "What is working" list
      2020.01.12: Tested system with OC, added more informations to BIOS settings
      2020.01.11: Added SmallTreeIntel82576.kext for 2nd Ethernet, Tested Ethernet ports
      2020.01.11: First upload
       
    • By innerd
      Salve, ho da poco aggiornato il bios del notebook in firma alla versione 304, ma dopo averlo fatto non sono piu riuscito a farlo avviare.
      Ho cancellato il dsdt e gli ssdt (eccetto quello delle porte usb e pnlf, il resto ho utilizzato ssdttime con il nuovo dump).
      Credo che si blocchi nel momento in cui dovrebbe apparire la mela (con verbose) e quindi all'inizializzazione della igpu. Avendo il dubbio fosse un problema di framebuffer diverso (volevo anche creare una fake imei ma non ho trovato nessuna guida al riguardo) ho cancellato le vecchie proprietà nel config e provato manualmente tutti i valori mobile con igfxframe come flag, 2 volte sono stato fortunato con 0x1612002 ma senza riuscire a farlo partire piu di quelle poche volte. Con un framebuffer mobile e in safe mode riesco ad entrare ma in nessun altro modo, avete consigli?
      CLOVER.rar
    • By midi-sama
      After a long time of cooking this computer up with a lot of stuff, I'm finally releasing my guide for this P50 with OpenCore.
       
      Lenovo ThinkPad P50 macOS Install with OpenCore
       
      This thread may be used for questions/corrections/additions. Good Luck.
×