Jump to content
MaLd0n

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

2,448 posts in this topic

Recommended Posts

Advertisement

none

 

check my signature with z97/h97 series

Can I use your DSDT in your signature for my build? Should I instead edit my DSDT extracted through clover F4 based on yours? What you recommend me to do?

Share this post


Link to post
Share on other sites

 

Hi, @MaLd0n

 

Can you please have a look at my system? Thanks.

 

macOS Sierra 10.12.6 (16G29)

Model: ASUS K52JU

Motherboard: Don't know, maybe HM55 created by ASUS

CPU: Intel® Core™ i3-380M
Memory: 2GB
Graphic: Radeon HD 6370M 512MB

 

Hi MaLd0n,

 

Can you please have a look at my platform?

Thanks.

Share this post


Link to post
Share on other sites

Hey, MaLd0n,

 

 

First of all I want to say its really cool that you're offering to do this for people, thank you so much! Setting up my Hackintosh has been trickier that I expected, but I'm nearly there. The part that's been the hardest for me so far is figuring out how to patch my ddst/ssdt, and knowing which would be better.

 

Anyway, my computer is an Asus VM60 Vivomini PC and I'm trying to run Sierra on it. It's a desktop but it runs on a mobile chipset, so I've heard its better to set this up as a MacBook. Also, from what I've seen it seems the best Intel Platform ID to use for a desktop with integrated mobile graphics is 0x0166000A, do you know if that would be true?

 

Again, thank you very much!

Share this post


Link to post
Share on other sites

Hi!

 

I am in the need of your help please.

 

Can someone please make a dsdt to make the Laptop of my neighbor complete?

Just for your information, the one from the Ideapad 500S - 15ISk is not working as the hardware is diffrent.

 

 

It's a 

 

Lenovo IdeaPad 500S-13ISK

Processor
Intel Core i5-6200U 2.3 GHz 
Graphics adapter
Memory
8192 MB DDR3-1600 single-channel
Display
13.3 inch 16:9, 1920x1080 pixel, LGD048C (LP133WF2-SPL1), IPS, glossy: no
Mainboard
Intel Skylake-U Premium PCH

 

I've uploaded all files here:

 

https://wetransfer.c...12162711/6eda3c

 

Many thanks in advance!!

 

Cheers

 

URBANsUNITED

Share this post


Link to post
Share on other sites

i need work for gain a little money ;P

back for home in a few days

Good luck, friend of Rio de Janeiro. Who writes, is a friend of Salvador, I know how much we have to work in this country.

Share this post


Link to post
Share on other sites

First... ;) 
If you need a full patched DSDT... 
-Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) and tell me what your hardware!
-Post Ioreg, extract with Ioreg Explorer
-Run it, post files generate in your desktop

 

 

Hi MaLd0n,

 

Hoping you can help with sleep, everything else seems to be working fine, but I may have noobed up fixing the DSDT I got elsewhere...

 

Mac OS 10.13

Mobo: GA-P55A-UD3 Rev. 1

CPU: Intel Core i7 860 Socket 1156

Memory: 12Gb (X.M.P 1660MHz)

Graphic: Gigabyte Geforce GTX 1050Ti G1 4Gb
Audio & Microphone: Realtek ALC888S-VD (AZAL)
Network: Realtek RTL8168D/8111D
              BCM943602CS in adapter
Extras: Inateck KTU3FR-5O2I 5-port USB3.0 PCI-E Card
 
DPCIManager ScreenShot in zip
 
If you wouldn't mind making a full Mald0n DSDT for me that would be awesome, then I know I for sure I have a perfect DSDT.
HDMI audio patching using Toleda's script doesn't work to enable, it doesn't see the PEGP@3, changing the script to look for it results in it saying it is patched, but no audio.
 
Just anything you can do would be great, My system works ok now, but there are problems I notice like my keyboard NumPad returns to screensaver when used for my password, the authentication boxes apple sends also have trouble with it, not sure if that is something that can be fixed in a DSDT, I do have a few apple keyboards, the old black keys and white keys from the emac era (I think) and a newer aluminum wired that is in use with my iMac.
 
I game and those can only use 3 keys at a time lol.
 
I did try mixing the patched DSDT from elsewhere with PJALM patches hoping for sleep, but it has not worked out for sleep and I am thinking my issue is either the DSDT or bios settings.
 
I did try to patch my own clean DSDT with patches from MacMan and PJALM, though it worked great (I think, maybe) the audio was garbled and I couldn't fix it properly.
 
Anyhow, Thank you in advance.
 
Also, why one beer? I'll send you enough for a 6 pack of tall boys (16oz, about $10 USD right?) in return for a fully patched system :D

iFrankie.zip

Send me iFrankie.zip

Share this post


Link to post
Share on other sites

Hi MaLd0n,

 

I have been struggling with the update to Sierra for a while now. I've updated from 10.10.5 to 10.12.6 using Rampagedev's DMG. I do run into issues though:

  1. AppleIntelCPUPowermanagement always causes a panic so I had to remove it.
  2. After that, I get panics during boot at different stages. It usually takes 2-3 reboots before things get stable. Once I am fully through the login process, the system works without a glitch.

My config:

  1. GA-X79-UD3 (patched to recognise NVME at boot)
  2. i7 4930k (no OC)
  3. MSI GTX1060 3GB with Nvidia 378.05.05.25f01webdriver
  4. Intel 750 NVME PCIe SSD boot drive using Pikeralpha's patch to use NVME

I had the same issues before I installed the NVME drive. I did an upgrade from 10.10 to 10.12 but I get similar issues on a clean install.

 

Can you help me out here?

 

 

 

 

Toms MacPro.ioreg.zip

EFI.zip

Send me Toms MacPro.zip

Share this post


Link to post
Share on other sites

i need work for gain a little money ;P

back for home in a few days

 

Hi MaLd0n, I forgot to quote you in my first post so you would know I asked for your expertise. :)

 

Added one to it a day or so ago hoping it would notify you, but I doubt it did.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI CLOVER Z390 DESIGNARE.zip
       
      ---OPENCORE FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI OPENCORE Z390 DESIGNARE.zip
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app

      https://www.youtube.com/watch?v=k9wmIfGLe3A
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By fusion71au
      Clover r5051 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r5051 for VMware.zip". Mount Clover-v2.5k-5051-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By shinho73
      Hello everyone. I managed to install AMD Sierra V5(10.12.6) on my old AMD A8 7600 PC(Mother Board-A58M-E, GPU- Palit Geforce GT730 DDR3). Everything is working except the GPU. The GT730 DDR3 GF108 is natively supported on Sierra, but for some reason, it is not working. On Clover Config, "Inject Nvidia" is selected, no Nvidia Web, and nv_disable=1. On "About This Mac" it just says " NVIDIA Chip Model 3 MB".
      I have attached config.plist. Can someone look at it please? Any help will be greatly appreciated. Thank you. 





      config.plist
    • By headkaze
      Framebuffer patching in Mojave
      Binary patching framebuffers using KextsToPatch in Clover is no longer a viable method in Mojave for Skylake and above. Now you need to use Lilu + WhateverGreen.
       
      Not just for Mojave
      This method of framebuffer patching is not only required for Mojave we recommend it for all previous and future releases of macOS.
       
      Coffee Lake Users
      Please note that the new WhateverGreen will not work with fake Kaby Lake platform-id's. You will need to have either macOS 10.14 Beta 4 (18A336e) or macOS High Sierra 10.13.6 (17G2112). The latter is a special build only available to MacBookPro15,1 or MacBookPro15,2 board id's. You can create a macOS High Sierra 10.13.6 (17G2112) installer by running installinstallmacos.py. (Update: vit9696 added back ability to fake Kaby Lake platform-id's)
       
      Lilu + WhateverGreen
      WhateverGreen is going to replace all the other video patching plugins for Lilu (it currently has merged WhateverGreen, IntelGraphicsFixup, NvidiaGraphicsFixup, Shiki and CoreDisplayFixup). Others will likely follow (such as AppleALC, HibernationFixup and IntelGraphicsDVMTFixup). This is aiming to be the all-in-one solution for video.
       
      Preliminary
      1. Remove:
      - FakePCIID_Intel_HD_Graphics
      - IntelGraphicsFixup
      - NvidiaGraphicsFixup
      - CoreDisplayFixup
      - Shiki
      2. Turn off all graphics injections in Clover:
      - config.plist/Graphics/Inject/ATI=NO
      - config.plist/Graphics/Inject/Intel=NO
      - config.plist/Graphics/Inject/NVidia=NO
      - config.plist/Graphics/ig-platform-id=
      - config.plist/Devices/FakeID/IntelGFX=

      3. Disable DSDT Clover fixes:
      - AddHDMI
      - FixDisplay
      - FixIntelGfx
      - AddIMEI
      4. Disable UseIntelHDMI
      5. Remove boot argument: -disablegfxfirmware
      6. Remove any IGPU and HDMI entries from:
      - config.plist/Devices/Arbitrary
      - config.plist/Devices/Properties
      - config.plist/Devices/AddProperties
      7. Remove any IGPU and HDMI related SSDT and DSDT from:
      - CLOVER/ACPI/patched
      8. Renaming GFX0 -> IGPU
      - WhateverGreen will do this automatically (see caveat below)
      - Be aware that WhateverGreen does not rename all instances of GFX0 -> IGPU but should be okay in most cases
      - You may need to include Clover GFX0 -> IGPU rename for other kexts or ACPI patching that require it
       
      Compile Lilu + WhateverGreen
      Download WhateverGreen. Make sure you place the debug version of Lilu into the root of WhateverGreen before you compile. Install Lilu and WhateverGreen kext's into the usual place. Compile WhateverGreen as debug if you want to view debug output.
       
      Having trouble compiling?
      If you're having trouble compiling you can download the official release binaries or download my (unsupported) build_lilu.sh shell script and run it in a folder to download and build Lilu + WhateverGreen using Xcode automatically. I recommend you try the debug versions first (place them into Clover's EFI/Clover/kexts/Other folder).
       
      Get the device path of your IGPU:
      Download and use the gfxutil tool like so:
      $ ./gfxutil IGPU = PciRoot(0x0)/Pci(0x2,0x0) ig-platform-id
      For the AAPL,ig-platform-id (AAPL,snb-platform-id for Sandy Bridge) entry Clover requires this value to be in Data format so you need to reverse the bytes. So if you want your platform-id to be 0x3EA50009 first reverse the bytes (0900A53E) then use Xcode's plist editor to add the values to Clover's config.plist.

       
      What ig-platform-id should I use for my system?
      You should choose one that is the closest match to your system. I recommend you do some research on this before choosing one. See post #2 for available options. More info can be found here.
       
      You can determine the generation of your CPU by the first digit after the hyphen.
      Examples:
      - Intel(R) Core(TM) i5-2760QM (Gen 2)
      - Intel(R) Core(TM) i7-5257U CPU @ 2.70GHz (Gen 5)
      - Intel(R) Core(TM) m3-6Y30 (Gen 6)
      - Intel(R) Core(TM) i5-8350U (Gen 8)
       
      Spoofing Intel CPU Gen
      If you need to spoof a different Intel CPU generation you can use the lilucpu=N boot flag. The N refers to the following Intel generations:
      4    SandyBridge 5    IvyBridge 6    Haswell 7    Broadwell 8    Skylake 9    KabyLake 10   CoffeeLake To spoof a CPU you will need to set a valid device-id in your GPU entry in Devices/Properties for the appropriate Intel generation.
       
      Eg. Spoofing Skylake (lilucpu=8 boot flag with device-id=0x16190000), Kaby Lake (lilucpu=9 boot flag with device-id=0x12590000).
       
      Here are some recommended frames:
       
      Gen 2: Sandy Bridge (Intel HD Graphics 2000/3000)
      - S/L/E/AppleIntelSNBGraphicsFB.kext
      - Support started with OS X 10.7.x and ended with macOS 10.13.6
      - Metal support is not available
      - device-id: 0x0102 0x0106 0x010A 0x0112 0x0116 0x0122 0x0126
      - AAPL,snb-platform-id (desktop): 0x00030010 (default)
      - AAPL,snb-platform-id (laptop): 0x00010000 (default)
       
      Gen 3: Ivy Bridge (Intel HD Graphics 2500/4000)
      - S/L/E/AppleIntelFramebufferCapri.kext
      - Support started with OS X 10.8.x
      - device-id: 0x0152 0x0156 0x0162 0x0166
      - AAPL,ig-platform-id (desktop): 0x0166000A (default), 0x01620005
      - AAPL,ig-platform-id (laptop): 0x01660003 (default), 0x01660009, 0x01660004
       
      Gen 4: Haswell (Intel HD Graphics 4200-5200)
      - S/L/E/AppleIntelFramebufferAzul.kext
      - Support started with OS X 10.9.x
      - device-id: 0x0D26 0x0A26 0x0A2E 0x0D22 0x0412
      - AAPL,ig-platform-id (desktop): 0x0D220003 (default)
      - AAPL,ig-platform-id (laptop): 0x0A160000 (default), 0x0A260005 (recommended)
       
      Gen 5: Broadwell (Intel HD Graphics 5300-6300)
      - S/L/E/AppleIntelBDWGraphicsFramebuffer.kext
      - Support started with OS X 10.10.2
      - device-id: 0x0BD1 0x0BD2 0x0BD3 0x1606 0x160E 0x1616 0x161E 0x1626 0x1622 0x1612 0x162B
      - AAPL,ig-platform-id (desktop): 0x16220007 (default)
      - AAPL,ig-platform-id (laptop): 0x16260006 (default)
       
      Gen 6: Skylake (Intel HD Graphics 510-580)
      - S/L/E/AppleIntelSKLGraphicsFramebuffer.kext
      - Support started with OS X 10.11.4
      - device-id: 0x1916 0x191E 0x1926 0x1927 0x1912 0x1932 0x1902 0x1917 0x193B 0x191B
      - AAPL,ig-platform-id (desktop): 0x19120000 (default)
      - AAPL,ig-platform-id (laptop): 0x19160000 (default)
       
      Gen 7: Kaby Lake (Intel HD Graphics 610-650)
      - S/L/E/AppleIntelKBLGraphicsFramebuffer.kext
      - Support started with macOS 10.12.6
      - device-id: 0x5912 0x5916 0x591B 0x591C 0x591E 0x5926 0x5927 0x5923 0x87C0
      - AAPL,ig-platform-id (desktop): 0x59160000 (default)
      - AAPL,ig-platform-id (laptop): 0x591B0000 (default)
       
      Gen 8: Coffee Lake (Intel UHD Graphics 630)
      - S/L/E/AppleIntelCFLGraphicsFramebuffer.kext
      - Support started with macOS 10.13.6 (17G2112) / 10.14 beta 4 (18A336e)
      - device-id: 0x3E9B 0x3EA5 0x3EA6 0x3E92 0x3E91 0x3E98
      - AAPL,ig-platform-id (desktop): 0x3EA50000 (default), 0x3E9B0007 (recommended)
      - AAPL,ig-platform-id (laptop): 0x3EA50009 (default)
       
      Framebuffer Patching
      WhateverGreen does most of the work automatically for you and in most cases you do not need any extra Framebuffer Patching. At the minimum though you should choose an ig-platform-id suitable for your system and place it in config.plist/Devices/Properties like this:

      Here are some reasons why you might need extra Framebuffer Patching:
      - Setting DVMT for those who can't set it above 32 MB in BIOS (framebuffer-stolenmem / framebuffer-fbmem)
      - Setting higher VRAM for 4K users who experience graphical glitches (framebuffer-unifiedmem)
      - Disabling eGPU (disable-external-gpu)
      - Enable pixel clock patch for 4K support (enable-hdmi20)
      - Disabling connectors to enable sleep (framebuffer-pipecount / framebuffer-portcount / framebuffer-conX-type=-1)
      - Removing CNConnectorAlwaysConnected flag for eDP laptop screens on < 10.13.6 (framebuffer-con0-flags=0x00000090)
      - Changing connector types to match your systems ports (framebuffer-conX-type)
       
      Framebuffer Patching Types
      We have three different types of patches:
       
      1. Arbitrary (Recommended)
      framebuffer-patch-enable (required to enable below) framebuffer-framebufferid (optional; defaults to current platform-id) (all below are optional) framebuffer-mobile framebuffer-pipecount framebuffer-portcount framebuffer-memorycount framebuffer-stolenmem framebuffer-fbmem framebuffer-unifiedmem framebuffer-cursormem (Haswell only) framebuffer-camellia framebuffer-flags framebuffer-conX-enable (required to enable below) framebuffer-conX-index framebuffer-conX-busid framebuffer-conX-pipe framebuffer-conX-type framebuffer-conX-flags 2. All Data
      framebuffer-conX-enable (required to enable below) framebuffer-conX-alldata 3. Find / Replace
      framebuffer-patchX-enable (required to enable below) framebuffer-patchX-framebufferid (optional; defaults to current platform-id) framebuffer-patchX-find framebuffer-patchX-replace framebuffer-patchX-count (optional; defaults to 1) You should place your patches in config.plist/Devices/Properties in Clover config.plist.
       
      Here are some example patches:
      - 32MB BIOS, 19MB stolen (framebuffer) 9MB fbmem (cursor) 2048MB unifiedmem (vram)

       
      - Pipe / Port Count 3 to 2
      - Connector 1 DP to HDMI
      - Connector 2 Disable

       
      Here is an example of the All Data method:

       
      Here is an example of the Find / Replace method:

       
      Framebuffer Dumps
      There are two ways to dump your framebuffer data (both require WhateverGreen + Lilu debug versions):
       
      1. Using -igfxdump boot flag to dump IGPU framebuffer kext to /AppleIntelFramebuffer_X_Y (root of your boot drive)
       
      There are several ways of reading this dump:
      - Using 010 Editor along with the IntelFramebuffer.bt template
      - Using Hackintool File->Open menu
       
      2. Using -igfxfbdump boot flag to dump native and patched framebuffer table to ioreg at IOService:/IOResources/WhateverGreen
       
      There are several ways of reading this dump:
      - Using dump_platformlist.sh shell script
      - Using Hackintool File->Import->IOReg Dump menu
       
      3. Using Hackintool Framebuffer->macOS 10.14 menu
       
      Adjusting the brightness on a laptop
      1. Method 1
      Enable Clover DSDT fix AddPNLF. Enable SetIntelBacklight and SetIntelMaxBacklight. A specific value is not necessary - it will be automatically injected according to the processor installed.
      2. Method 2
      Use this ACPI table: SSDT-PNLF.dsl SSDT-PNLF.aml
      Do not use both methods at the same time!
       
      Digital Audio (HDMI / DVI / DP)
      To enable digital audio it is necessary to set the necessary properties and, usually, patch the connectors.
      To enable audio in general and HDMI in particular use WEG along with AppleALC.kext.
      On 10.10.5 and above, WEG automatically changes the connector-type of DP (00040000) to HDMI (00080000) if no custom patches are used.
      The actual connection may be of any type (HDMI / DVI / DP), but for the digital audio to function the connector-type must explicitly be HDMI.
       
      VGA support
      In most cases with Intel Skylake and newer it works by default.
      For Ivy Bridge and possibly other generations there are the options to patch your connectors with the following:
      06020000 02000000 30000000 // Option 1
      06020000 01000000 30000000 // Option 2
      On OS X 10.8.2 and newer it is impossible to have VGA on Ivy Bridge systems.
      Hot-plugging VGA usually does not work.
      In case this doesn't help - there are no other known solutions at this time.
       
      EDID
      EDID is usually correctly identified, so no actions are required. In rare cases, EDID needs to be injected manually.
      An EDID dump can be obtained, for example, with Linux. The correct EDID must be put into *AAPL00,override-no-connect* property for IGPU, where the second 0 stands for the display number.
      In some cases the EDID dump may be incompatible with macOS and leads to distortions. For some EDID in such cases you can use this script, which corrects a provided EDID and saves it to your desktop.
       
      HDMI in UHD resolution with 60 fps
      Add the enable-hdmi20 property to IGPU, otherwise you will get a black screen. Or instead of this property use the boot-arg -cdfon
       
      Disablng a discrete graphics card
      Add the disable-external-gpu property to IGPU. Or instead of this property, use the boot-arg -wegnoegpu
       
      Fix the invalid maximum link rate issue on some laptops (Dell XPS 15 9570, etc.)
      Add the enable-dpcd-max-link-rate-fix property to IGPU, otherwise a kernel panic would happen due to a division-by-zero. Or instead of this property, use the boot-arg -igfxmlr.
      You could also manually specify a maximum link rate value via the dpcd-max-link-rate for the builtin display.
      Typically use 0x14 for 4K display and 0x0A for 1080p display. All possible values are 0x06 (RBR), 0x0A (HBR), 0x14 (HBR2) and 0x1E (HBR3). If an invalid value is specified, the default value 0x14 will be used instead. If this property is not specified, same as above.  
      Fix the infinite loop on establishing Intel HDMI connections with a higher pixel clock rate on Skylake, Kaby Lake and Coffee Lake platforms
      Add the enable-hdmi-dividers-fix property to IGPU or use the -igfxhdmidivs boot argument instead to fix the infinite loop when the graphics driver tries to establish a HDMI connection with a higher pixel clock rate, for example connecting to a 2K/4K display with HDMI 1.4, otherwise the system just hangs (and your builtin laptop display remains black) when you plug in the HDMI cable.  
      1. General Notes
      For those who want to have "limited" 2K/4K experience (i.e. 2K@59Hz or 4K@30Hz) with their HDMI 1.4 port, you might find this fix helpful. For those who have a laptop or PC with HDMI 2.0 routed to IGPU and have HDMI output issues, please note that this fix is now succeeded by the LSPCON driver solution, and it is still recommended to enable the LSPCON driver support to have full HDMI 2.0 experience.  
      (You might still need this fix temporarily to figure out the connector index of your HDMI port. See the LSPCON section below.)
      LSPCON driver support to enable DisplayPort to HDMI 2.0 output on IGPU
      1. Brief Introduction
      Recent laptops (Kaby Lake/Coffee Lake-based) are typically equipped with a HDMI 2.0 port. This port could be either routed to IGPU or DGPU, and you can have a confirmation on Windows 10. Intel (U)HD Graphics, however, does not provide native HDMI 2.0 output, so in order to solve this issue OEMs add an additional hardware named LSPCON on the motherboard to convert DisplayPort into HDMI 2.0.
      LSPCON works in either Level Shifter (LS) or Protocol Converter (PCON) mode. When the adapter works in LS mode, it is capable of producing HDMI 1.4 signals from DisplayPort, while in PCON mode, it could provide HDMI 2.0 output. Some onboard LSPCON adapters (e.g. the one on Dell XPS 15 9570) have been configured in the firmware to work in LS mode by default, resulting a black screen on handling HDMI 2.0 connections.
      Starting from version 1.3.0, WhateverGreen now provides driver support for the onboard LSPCON by automatically configuring the adapter to run in PCON mode on new HDMI connections, and hence solves the black screen issue on some platforms.
       
      2. Before you start
      LSPCON driver is only applicable for laptops and PCs with HDMI 2.0 routed to IGPU. LSPCON driver is necessary for all newer platforms unless the new IGPU starts to provide native HDMI 2.0 output. Supported Intel Platform: Skylake, Kaby Lake, Coffee Lake and later.
      Skylake Case: Intel NUC Skull Canyon; Iris Pro 580 + HDMI 2.0 with Parade PS175 LSPCON.
      Coffee Lake Case: Some laptops, e.g. Dell XPS 15 9570, are equipped with HDMI 2.0 and Parade PS175 LSPCON. If you have confirmed that your HDMI 2.0 is routed to IGPU and is working properly right now, you don't need to enable this driver, because your onboard LSPCON might already be configured in the firmware to work in PCON mode.
      3. Instructions
      Dump your kernel log and you should also be able to see something simillar to lines below.
       
      // When you insert the HDMI 2.0 cable igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] called with controller at 0xffffff81a8680000 and framebuffer at 0xffffff81a868c000. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] No LSPCON chip associated with this framebuffer. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] Will call the original method. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] Returns 0x0. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] called with controller at 0xffffff81a8680000 and framebuffer at 0xffffff81a869a000. igfx @ (DBG) SC:   LSPCON::probe() DInfo: [FB2] Found the LSPCON adapter: Parade PS1750. igfx @ (DBG) SC:   LSPCON::probe() DInfo: [FB2] The current adapter mode is Level Shifter (DP++ to HDMI 1.4). igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] LSPCON driver has detected the onboard chip successfully. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] LSPCON driver has been initialized successfully. igfx @ (DBG) SC: LSPCON::getMode() DInfo: [FB2] The current mode value is 0x00. igfx @ (DBG) SC: LSPCON::getMode() DInfo: [FB2] The current mode value is 0x00. igfx @ (DBG) SC: LSPCON::getMode() DInfo: [FB2] The current mode value is 0x00. igfx @ (DBG) SC: LSPCON::getMode() DInfo: [FB2] The current mode value is 0x01. igfx @ (DBG) SC: LSPCON::setMode() DInfo: [FB2] The new mode is now effective. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] The adapter is running in preferred mode [Protocol Converter (DP++ to HDMI 2.0)]. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] Will call the original method. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] Returns 0x0. // When you remove the HDMI 2.0 cable igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] called with controller at 0xffffff81a8680000 and framebuffer at 0xffffff81a868c000. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] No LSPCON chip associated with this framebuffer. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] Will call the original method. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] Returns 0x0. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] called with controller at 0xffffff81a8680000 and framebuffer at 0xffffff81a869a000. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] LSPCON driver (at 0xffffff802ba3afe0) has already been initialized for this framebuffer. igfx @ (DBG) SC: LSPCON::setModeIfNecessary() DInfo: [FB2] The adapter is already running in Protocol Converter (DP++ to HDMI 2.0) mode. No need to update. igfx @ (DBG) SC: LSPCON::wakeUpNativeAUX() DInfo: [FB2] The native AUX channel is up. DPCD Rev = 0x12. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] Will call the original method. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] Returns 0x0. Additionally, you can find these properties injected by the driver under the corresponding framebuffer.
      (Only available in DEBUG version)
       
      fw-framebuffer-has-lspcon indicates whether the onboard LSPCON adapter exists or not.
      fw-framebuffer-preferred-lspcon-mode indicates the preferred adapter mode. 1 is PCON, and 0 is LS.
       
      Debug Output
      To get debug output from Lilu use the -liludbgall liludump=60 boot flags. You will need to compile Lilu and WhateverGreen as debug for both of these flags to work. Log files should be located at /var/log/Lilu_*.
       
      To view debug paste the following into Terminal (weglog.txt will output to your home directory):
      log show --predicate 'process == "kernel" AND (eventMessage CONTAINS "WhateverGreen" OR eventMessage CONTAINS "Lilu")' --style syslog --source --last boot >weglog.txt Getting Help

      To help the users of this forum diagnose issues with your configuration please generate a Lilu debug log and then run gen_debug.sh to generate a folder of debug files you can attach to a forum post requesting help.

      Credits
      - vit9696 and lvs1974 for WhateverGreen (Full Credits) and Lilu (Full Credits)
      - Andrey1970 for his guide on applelife.ru
      - RehabMan for all data patching method, ioreg framebuffer dump and other contributions
       


×