Jump to content
About Just Joined group Read more... ×
  1. caes95

    caes95

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By rvilbert
      Hi all,
       
      I have been trying to install Big sur on Opencore and i believe i'm almost there but i get stuck on a grey screen with my mouse pointer just before i can see the installer screen.
      I have applied the various SSDT patches for X99. I thought that was linked to VirtualSMC which I replaced by FakeSMC but same issue. I also declared my graphic card in config.plist as i thought it could come from there but that's not the issue (Radeon RX 570).
      I have been scratching my head for some time now. Any idea from anyone please.
       
      I have attached my EFI folder and my ioreg extract. Let me know if you need anything else.
       
      Thanks a million.
       
      My config:
      Asus X99 Deluxe
      Core-i7 5960x
      Radeon RX 570
       
      @RemB
      @jmacie
      I would appreciate your help please. Any views of what could be wrong? Thanks a lot
       
      OpenCore 0.6.2 for X99 BIG SUR.zip
      X99 iMac Pro.ioreg.zip
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11L, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9400K, 9600K, 9700K, 9900K, 9900KS (All KF Models work but use SMBios iMacPro1,1 instead)
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, RX 5500, 5500 XT, 5600, 5600 XT, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Reference RX 5700 XT (connected to the monitor via the DisplayPort)
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO Plus 1TB NVMe SSD macOS Catalina 
      • Samsung 970 EVO 1TB NVMe SSD Windows 10 Pro
      • ABWB BCM94360CS2 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11L or Higher to use any of these EFI's, The DSDT is not designed for any other Bios revision
      Z390AORUSMASTER.F11l.zip  - Aorus Z390 Master Bios Firmware F11L 
       
      CLOVER & OPENCORE EFIs 
      Current EFIs Updated 05/10/2020
       
       
      Clover EFI Update v5120 - 04/08/2020 - Use with Bios revision F11L or Higher Only or Replace with the older F11c/F10 DSDT if you don't want to update the bios
       
      EFI Clover VEGA Navi 030820.zip - Vega, Navi (5700, 5700XT etc), Radeon VII DSDT SMBios 19,1 EFI
      EFI Clover Polaris NVIDIA 030820.zip - RX500 Polaris Series (RX590, 580, 570 etc) SMBios 19,1 EFI
       
      Please Note - I have now set KernelPM to No as standard so if you don’t have a unlocked MSR or not using my MSR Unlocked Bios Profile then go into the Clover Config.plist and set KernelPM to Yes or you won’t be able to boot up. An even better fix would be to unlock your MSR using my profile method.
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
       
       
      OpenCore EFI Update v0.6.2 - 05/10/2020 (Big Sur Ready)
      Myself and @texem have now created a OpenCore EFI done the way the OpenCore Devs intended it to be made, There is no DSDT in use so you can use this EFI on any supported GPU and the SSDTs have been made so they will not be used in any other Operating System apart from MacOS.
       
      OpenCore 062 Z390 Master 19,1 051020.zip - OpenCore v0.6.2, SMBios iMac19,1
      OpenCore 062 Z390 Master 1,1 051020.zip - OpenCore v0.6.2, SMBios iMacPro1,1 (IGPU Disabled)
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
      Note 2 - Do not try to carry across your old OpenCore Config.plist to the new EFI as to many changes have occurred in 0.6.0 so please use the new Config.plist instead.
       
       
      PlistEdit Pro.zip - PlistEdit Pro (use to edit OpenCore)
       
      Using PlistEdit Pro add your details by modifying the following 

       
      PLEASE NOTE - These EFIs are setup to be used with your msr Unlocked so make sure you use the F11L Unlocked Profile but if for any reason you can not unlock MSR then just modify following in the OpenCore config.plist :
      
       
       
       
      CFG Unlock (MSR) F11L BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      Z390AORUSMASTER.F11l.zip - Aorus Z390 Master Bios Firmware F11L 
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11L)
       
      • Enter BIOS -> Press Delete -> Enter Setup
      • Save & Exit -> Load Optimized Defaults
      • Boot -> CFG Lock -> Disabled
      • Boot -> Windows 8/10 Features -> Win 8/10 WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled (Disabled If Using SMBios 1,1)
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> Super IO Configuration -> Serial Port -> Disabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       

       

       

       

       

       

       

       
       
       
    • By tosziro
      Hello,
       
      I successfully installed MacOS Catalina on this machine it booted after it. Keyboard, ethernet, touchpad, battery status was working. Only that was broken was wifi...
       
      Sadly after reboot out of the blue it stop to work completly. Displays kernel panic. I didnt change anything.
      panic 2cpu 2 caller userspace watchdog timeout no successful checkins from com.apple.logd in 120 seconds
       
      This is my first Hackintosh.  I have complety no idea what should I do now. :-(
      Maybe you could help me, Im attaching my EFI config... I used OpenCore to install.
       
      Intel Core i7-4702MQ Intel HD Graphics 4600 / Nvidia 760M  
      Thank you.
      EFI.zip
    • By 83427
      I'm member of this community for 10 years and now I feel I can finally somehow help to other beginners like me, who has the same or similar hardware like me. 
       
      Here is my EFI partition with OpenCore 0.6.1 configured for 
      Asus Maximus VI Formula (chipset Z87)
      Intel Core i5-4670K @ 4GHz
      32GB DDR3 1600MHz
      Sapphire Radeon RX480 4GB
       
      I removed SN, UUID and others unique values from config.plist so don't forget to fill yours own or generate new. For beginners like me is very useful OpenCore Configurator
       
      Its compatible with macOS Catalina. I'm not sure, but I think that Mojave works also.
       
      I spent a lot of time by resolving problem with integrated sound card (Realtek ALC1150). If you have problems with sound, try another layout number via alcid=XX in boot-args. For Maximums VI Formula value 5 match the best I think. For more info how to fix soundcard read here: https://dortania.github.io/OpenCore-Post-Install/universal/audio.html 
       
       
       
      EFI.zip
    • By HerryYT
      I own a asus eee pc 1025c with patched bios to support x64 os, is it possible to install any version of mac os even with patched kernel? anyone interested in helping? 
×