Jump to content
  1. Cyberdevs

    Cyberdevs

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By nukebuzag
      Hi, my name is Javier, i'm trying to install a Mojave Clean Installation, following the guide but allways is stopped with "alloc type 2". I've been searching the forums for 4 days, I've tried everything they say, but I can't fix the error. I'm trying to add the driver "OsxAptioFix2Drv-free2000.efi", "OsxAptioFixDrv-64.efi" and "OsxAptioFix3Drv.efi" but don't work... My current hardware is:

      Motherboard: MSI X299 GAMING PRO CARBON AC, bios.v-E7A95IMS.180
      CPU: Intel core i7-7820X
      HardDrive: Samsung 960EVO NVMe M.2 500Gb
      GPU: SAPPHIRE Radeon RX Vega64 8GB HBM2
      RAM: 32Gb - x4 8Gb - Corsair Vengeance RGB DDR4 3600

      Please can anybody help me? Thanks you very much
      EFI.zip
    • By ludufre
      Installing macOS Mojave on Lenovo ThinkPad L440

       
      New Catalina Installation Guide: 
       
       
      There are two version of this laptop:
      - 20AS = Chipset QM87, without Express Card (mine).
      - 20AT = Chipset HM86, with Express Card.
      I strong believe is the same thing...
       

      Changelog:
       
      10/20/2019 20:00h GMT-0
      - Added info about update 10.14.16.
      - Added link do Catalina guide. 
       
      07/30/2019 14:56h GMT-0
      - Fixed typo in credits. Thanks @"Sniki"
       
      06/09/2019 14:16h GMT-0
      - Added missing parts in the post-install step. 
       
      06/04/2019 17:19h GMT-0
      - Updated Clover link. 
       
      06/02/2019 18:08h GMT-0
      - Added info about update 10.14.5. 
       
      03/13/2019 13:15h GMT-0
      - Updated info about touchpad replacement and CPU and 4G LTE modem.
       
      02/05/2019 18:47h GMT-0
      - Updated info about CPU replacement and 4G LTE modem.
       
      02/04/2019 15:24h GMT-0
      - Sometimes the VoodooHDA.kext doesn't work.
      - Added AppleHDADisabler.kext to fix that (attached bellow).
       
      01/24/2019 14:42h GMT-0
      - Added more adjustments to use of VoodooHDA.
      - Updated VoodooHDA links to 2.9.1 official (without installer).
      - Changed PCM volume from 90 to 180 in Info.plist (attached modified VoodooHDA.kext bellow)
      - Updated SSDT-L440.aml (Removed HDEF and HDAU, not needed).
      - Updated config.plist (Changed to user Audio layout to 1).
       
      01/22/2019 20:47h GMT-0
      - I gave up on the AppleALC.
      - Headset does not work.
      - Now with VoodooHDA is perfect and the sound even louder.
       
      01/22/2019 14:37h GMT-0
      - Added info about update 10.14.3. 
       
      01/22/2019 13:46h GMT-0
      - Added link to BIOS reassing guide.
       
      01/20/2019 11:49h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i5-4300M ->  Work. All SpeedStep stages.
      - Video Card: Intel HD4600 ->  Work. QE/CI and Metal.
      - Chipset: Intel QM87 ->  Work.
      - Mini DisplayPort ->  Work. But no audio, yet.
      - VGA ->  Not work. Normal.
      - Audio: ALC292 ->  Work.
      - WiFi/Bluetooth: Intel AC 7260 ->  Not work. Replaced with DW1560 (need whitelist removal).
      - Ethernet: Intel I217-LM ->  Work.
      - Card Reader: Realtek RTS5227 ->  Not work.
      - Keyboard and Touchpad ->  Work.
      - Webcam ->  Work.
      - Fingerprint Reader ->  Not work. Normal.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Extras
       
      - FullHD 1920x1080 display upgrade: 
      Replaced with AU Optronics B140HAN01.1 30pin eDP (B140HAN01.2 and B140HAN01.3 also compatible).
      Apparently same screen as Dell Latitude E6440, E7440, Lenovo Ideapad U430 and E129.
       
      - CPU upgrade:
      Replaced the stock Intel Core i5 4300M 2.6Ghz (3.3Ghz turbo) 6M cache with Intel Core i7 4700MQ 2.4Ghz (3.4Ghz turbo) 6MB.
      I initially had problems with overheating. The processor ran at full load above 90 degrees.
      After using a quality thermal paste I can work between 70 and 80 degrees.
      Acceptable taking into consideration that the new processor has 47TDP versus 37TDP which is recommended.
      I also had no problem consuming the battery while charging. The original 65W source seems to have figured out.
       
      - Touchpad upgrade:
      Replaced the stock with T460 touchpad.
      This is serious: you have to do it! It should be stock. Touchpad with precision and absurd quality!
      Just do it!
       
      - RAM upgrade:
      No mistery here. Just upgade.
       
       
      Todo
       
      - Make DP audio work.
      - Make Card Reader work.
      - Upgrade CPU to i7-4712MQ (Ordered. It's on the way) Done, but received i7-4700MQ (47w TDP, with good paste I have no overheating)
      - Replace touchpad with T460 model (Ordered. It's on the way) Done. Sensitivity and perception of quality much better. I recommend 100%!
      - Sierra Gobi5000 4G LTE modem EM7355 (Ordered. It's on the way. I hope works. ) Done, but not work. Recognize but not connect. I already gave up...
      - Upgrade to 16GB RAM Done
      - Make trackpad appear in System Preferences
       
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Mojave install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction This will take about 30 minutes.
       


      Install bootloader

      Download the CloverEFI from SourceForge (used 4934) and install with this options on "Install macOS Mojave":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - ApfsDriverLoader-64
      - UEFI Drivers - AptioMemoryFix-64


       
       
      Make things works

      Will be created a partition named EFI and mounted in Desktop.
      - Replace the /Volumes/EFI/CLOVER/config.plist with mine attached below
                    If you have modded BIOS with Advanced Menu and enabled 128MB DRAM-prealloc use 128MB_DRAM-prealloc_config.plist.zip
                    If no, then use 32MB_DRAM-prealloc_config.plist.zip
      - Put SSDT-L440.aml attached below in /Volumes/EFI/CLOVER/ACPI/patched/
       
      Generate your Serial, MLB and SmUUID
       
      - Open the replaced config.plist with Clover Configurator (used 5.3.2.0)
      - Go to SMBIOS, click few times in "Generate New" in Serial Number and SmUUID.
       
      Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the HWSensors 3 from here. I used the FakeSMC.kext, ACPIMonitor.kext and IntelCPUMonitor.kext inside of DMG version r196.
      - Download the VoodooPS2Controller.kext from here. I used version 2018-1008.
      - Download the IntelMausiEthernet.kext from here. I used the version 2018-1031.
      - Download the Lilu.kext from here. I used the version 1.3.6.
      - Download the VoodooHDA from here. I used the version 2.9.1 and patched the sound volume (attached below).
      - Download the WhateverGreen.kext from here. I used the version 1.2.9.
      - Download the AppleBacklightFixup.kext from here. I used the version 2018-1013.
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
      - Download the ACPIBatteryManager.kext from here. I used the version 2018-1005.
       
      - Download the VirtualSMC.kext from here. I used version 1.0.2. Replaced with FakeSMC of the HWSensors 3 r196 package.
      - Download the FakeSMC.kext from here. I used the version 2018-0915. Replaced with VirtualSMC.kext due 10.14.4 issues on update.
      - Download the AppleALC.kext from here. I used the version 1.3.4. Replaced with VoodooHDA.kext due mic not working.
       
       
      Wifi and Bluetooth (DW1560 / BCM94352Z)
       
      Unfortunately, some notebook manufacturers are currently blocking the replacement of wireless cards. They want you to only use the models sold by them. And of course, none of them from Lenovo for this notebook model is compatible with MacOS.
       
      If you try to start with an unauthorized wifi card for them, you will receive a screen error:
      1802: Unauthorized network card is plugged in - Power off and remove the network card. Since this check is done directly in the BIOS, the only solution is to modify it.
      But since nothing is easy in this life, there is one small big problem:
      - The BIOS update procedure does not allow you to use modded files as it used to be.
      - You will need to physically reach your BIOS on the motherboard and make use of a USB BIOS reader/writer.
       
      So what you need to do:
      1. Disassembly your laptop;
      2. Dump your BIOS with an USB BIOS reader with SOIC8 clip (to not desolder from the motherboard);
      3. Patch it (In addition to removing the whitelist, add the advanced menu);
      4. Fix RSA signature;
      5. Reflash BIOS;
      6. Replace wireless card;
      7. Remount your laptop;
      8. Done.
       
      Soon, I'll provide step by step in this process. Probably until end of this week.
      In the meantime, if you need to, send me your dump that I do steps 3 and 4 for you.
      I also add the Advanced Menu so you can increase to 128MB the DRAM-prealloc.
       
      To fix a Modded BIOS to remove the 5 beeps on boot, you need this guide: https://www.insanelymac.com/forum/topic/337333-guide-fix-insyde-h2o-bios-signature-5-beeps-on-lenovo (traduzido: pt-BR)
       
       
      After replaced the wireless card. Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the AirportBrcmFixup.kext from here. I used the version 2.0.0.
      - Download the BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext from here. I used the version 2018-0505.
      - Download the BT4LEContinuityFixup.kext from here. I used the version 1.1.2.
       
       
      Now you can start the instalation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      My BIOS is the latest: 1.93 (J4ET93WW) 

      - Shutdown and insert the flash drive.
      - Power on with F1 pressed to enter BIOS setup.
      - Change value: Config - Intel(R) AMT - Intel(R) AMT Control to DISABLED
      - Change value: Security - Security Chip to DISABLED
      - Change value: Security - Anti-Theft - Intel(R) AT Module Activation to DISABLED
      - Change value: Security - Anti-Theft - Computrace to DISABLED
      - Change value: Security - Secure Boot to DISABLED
      - Change value: Startup - UEFI/Legacy Boot to BOTH, Legacy First and CSM Support = Yes
      - Save & Exit Setup (F10)
       
      - Now, hold the F12
      - In the list, select your flash drive.
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "Macintosh".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot. Maybe you have to press F12 again and select the flash drive.
      
      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation

      Install bootloader
       
      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

      Open the Clover installer inside flash drive that you copied before.

      Use same options above but choose the system partition this time.

      Now you need to replace the EFI folder inside your destination disk EFI parittion, with EFI folder inside flash card EFI partition.

      If the flash drive EFI partition of your destination disk or flash drive is unmounted:
      Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 0 for destination disk and 1 for flash drive.
       
      Then, eject the flash drive.
       
      Last step
       
      Move all Kexts from EFI partition to /Library/Extensions, with those commands in Terminal:
      sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/Other/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
       
      It's done!
       
       
      Updates
       
      System update 10.14.3
       
      - Updated with success;
      - Everything works perfectly after reboot;
       

       
       
      System update 10.14.4
       
      - Updated Clover to 4910.
      - Updated Lilu.kext to 1.3.5 and WhateverGreen to 1.2.7.
      - After first reboot the update progress stoped with:
      GTrace synchronization point 4 Unsupported CPU Unsupported PCH hmm.. mismatch sizes: 3100 vs 20 It was still possible to start the previous installation, selecting "Macintosh" as opposed to "macOS Install" in Clover.
      So I created a flash drive with Clover 4910 and put only my config.xml, SSDT-L440.aml, the updated Lilu.kext and WhateverGreen.kext. And I decided to test VirtualSMC instead of FakeSMC.kext.
      With this I was able to install update 10.14.4. After installation I can boot normally, even with FakeSMC.kext that already in /Library/Extensions.
      I do not know what exactly happened, but now works everything like was previously.
       


       
       
      System update 10.14.5
       
      - Updated Clover to 4934.
      - Updated Lilu.kext to 1.3.6 and WhateverGreen to 1.2.9.
      - After first reboot the update progress stoped again (like 10.14.4 update) with:
      GTrace synchronization point 4 Unsupported CPU Unsupported PCH hmm.. mismatch sizes: 3100 vs 20 It was still possible to start the previous installation, selecting "Macintosh" as opposed to "macOS Install" in Clover.
      I decided to rollback to FakeSMC.kext but this time with the version of HWSensors 3. Link above.
      With this I was able to install update 10.14.5. After installation I can boot normally.
       

       
       
       
      System update 10.14.6
       
      - Updated Clover to 5097.
      - Updated Lilu.kext to 1.3.8 and WhateverGreen to 1.3.3.
      - Make system update.
       
       

      And last but not least

      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas, @"Sniki" and all others members involved directly or indirectly.
       
       
      Attachments
      32MB_DRAM-prealloc_config.plist.zip
      128MB_DRAM-prealloc_config.plist.zip
      SSDT-L440.aml
      VoodooHDA.kext.zip
      AppleHDADisabler.kext.zip
    • By soumaxetuirk
      If you have a working Brightness Slider and you might be using Brightness slider or manual hotkeys to control brightness then this guide may help you to use your Native hotkeys of laptop.
       
      (All the Credits goes to @RehabMan     For OS-X-ACPI-Debug Kext and DSDT Patches.)
       
       
      This step assumes that you are using RehabMan's VoodooPS2Controller
      Install the kext: https://github.com/RehabMan/OS-X-ACPI-Debug Open MaciASL and click on patch.(Add rehab man repo) Apply "Add DSDT Debug Methods" and "Instrument EC Queries" that are under Brightness Fix. Save the DSDT and restart Look in Syslog as you press the key corresponding to brightness to determine which _QXX methods handle the keys (UPDATE: From Sierra Apple changed logging process. So you won't find ACPIdebug result using syslog command. Instead use following command )
      log show --last 5 | grep ACPIDebug 6. Then patch DSDT:
      into method label _Q1D replace_content begin // Brightness Down\n Notify(\_SB.PCI0.LPCB.PS2M, 0x0205)\n Notify(\_SB.PCI0.LPCB.PS2M, 0x0285)\n end; into method label _Q1C replace_content begin // Brightness Up\n Notify(\_SB.PCI0.LPCB.PS2M, 0x0206)\n Notify(\_SB.PCI0.LPCB.PS2M, 0x0286)\n end; Change the variable _Q1D/_Q1C as per the log. 

      7. Try compiling and check if it generates errors
      8. If it does, then change the PS2M to PS2X according to the one found in your DSDT
      9. Save and place the compiled DSDT.
      10. Now you should see that you have your corresponding keys to change your brightness 
       
       
       FOR  more detail and Queries,Check Out original Post of @RehabMan Here;
      http://www.insanelym...18#entry1997112
      Get Latest Version of  OS-X-ACPI-Debug kext here:
      https://bitbucket.org/RehabMan/os-x-acpi-debug/downloads
    • By AntoineWill
      Hello Everyone.

      I would like to know if anybody here got the correct custom USB SSDT for the Gigabyte Z390 Pro motherboard ?
      I got a Corsaire Carbide 275R case which got 2 extra USB 3.1 Gen 1 ports connected to the motherboard.
       
      I use my hackintosh for 4 months from now. I followed the Glasgood installation guides (attached at the bottom).

      I can't figure out how to clean the total mess I got when I plug my usb devices... And the process that I found here and there is a true nightmare for my noob skills. Any help would be awesome !!

      Links if needed :
      https://www.corsair.com/ww/en/Categories/Products/Cases/Carbide-Series-275R-Mid-Tower-Gaming-Case/p/CC-9011130-WWhttps://www.gigabyte.com/Motherboard/Z390-AORUS-PRO-rev-10#kf
      Thanks guys !
       
       
×