Gigabyte, in their infinite wisdom, decided to remove the option to disable serial ports, and not being able to do so has been causing me some problems. I know that I have to either use a patch in clover, or create a custom SSDT to disable super I/O, but I honestly do not know how to go about doing this. One of the weirder problems I'm experiencing is the inability to connect to Apple Music (error 11556) unless I go into my network settings, and delete my serial connection. If anyone could help me out with this, that'd be greatly appreciated; anyway, thank you for taking the time to read this.
Mobo GIGABYTE Z390 M GAMING (UEFI F8)
CPU: i5 9600k
RAM: 32GB DDR4 @ 2666 Mhz
GPU: AMD Radeon RX 580 w/ 8GB of VRAM (MSI armor oc edition)
Storage Samsung 970 evo 500GB
I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you.
A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.
This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F10, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware
8700k, 9600k, 9700k, 9900k
RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
(If you have success with any different CPU or GPU's then please do let me know)
@glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
• Intel I9 9900k @5.1Ghz
• Gigabyte AORUS Z390 MASTER
• Sapphire Nitro+ SE Vega56 ( connected to monitor with DisplayPort )
• Corsair Vengeance Pro RGB 16GB @3200mhz (2 x 8GB)
• Corsair RM850x 80 Plus Gold Power Supply Unit
• EK Custom Liquid Cooling Loop
• Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.1
• Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
• ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)
• Lian Li PC-O11DW Dynamic ATX Case
• Ethernet Port
• SSD Trim
• USB 3.0 & 2.0 (All ports Open Natively)
• Hardware Acceleration
• Sleep & Wake
• Sleep and Shutdown via the Power Button
• Netflix on Safari browser
• Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)
CLOVER EFI FOLDERS
please note - You must flash your Z390 MASTER bios to revision F10 to use any of these EFI's, The DSDT is not designed for any other Bios revision
mb_bios_z390-aorus-master_f10.zip - Z390 MASTER Bios Revision F10
Use this folder with igpu Enabled in bios for working Sidecar (Updated 1st Nov)
AudioGods Z390 Master Vega Navi EFI.zip - Vega 56/64 Navi & Radeon VII DSDT
AudioGods Z390 Master RX EFI.zip - RX Series DSDT
ADDITIONAL DSDT's (A big thanks to @MaLd0n for compiling these DSDT's)
To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
(If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
If Your Not Using File Vault Then Please Disable Hibernate
BroadcomFix.zip (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
Native Display Brightness with MonitorControl
BIOS SETTINGS (Bios Revision F10)
• Enter BIOS → Press Delete → Enter Setup
• Save & Exit → Load Optimized Defaults
• Boot -> Windows 8/10 Features -> Win 8/10
• Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
• Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
• Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
• Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
• Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
• Settings -> IO Ports -> Internal Graphics -> Enabled
• Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
• Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
• Settings -> IO Ports -> Aperture Size -> 512MB
• Settings -> IO Ports -> Wifi -> Disabled
• Settings -> IO Ports -> Audio Controller -> Enabled
• Settings -> IO Ports -> Above 4G Decoding -> Enabled
• Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
• Settings -> IO Ports -> USB Configuration -> XHCI Hand-off -> Enabled
• Settings -> Platform Power -> Platform Power Management -> Enabled
• Settings -> Platform Power -> ErP -> Enabled
• Settings -> Platform Power -> RC6(Render Standby) -> Enabled
• Save & Exit → Save & Exit Setup
Ciao ragazzi, sono incappato in un problema che di sicuro sono io stupido.
Premetto che: Chiavetta 32giga, formattata Journaled e GUID, Clover installato.
In primis la cartella che crea Clover dei Driver non si chiama drivers64EFI e ne crea una drivers e basta, de facto non legge i driver e di conseguenza la chiavetta per fare l'installazione.
Pazienza, ho scaricato i driver altrove e li ho buttati in una cartella drivers64EFI, ergo chiavetta rilevata dentro clover.
Arrivo all'utility disco, inizializzo l'SSD(samsung 860pro) in APFS e facendo partire l'installer non mi fa cliccare l'SSD APPENA formattato dicendomi che sto provando ad installare un MacOS più VECCHIO di quello attualmente installato o.0????????
Ok, CMD Q e torno all'utility, formatto in Journaled ma nulla di fatto, mi ridice la stessa frase. Faccio hackintosh da snow leopard ma una roba del genere mai vista.
La chiavetta l'ho creata col classico create installer media da una virtual machine con Mojave. E il driver APFS l'ho cercato apposta per 10.13 e i driver scaricati li ho trovati sul web per una MOBO identica alla mia ma Mojave (Aorus Ultra Z390).
Non ne vengo a capo. Devo forse formattare la chiavetta in MBR?
GRAZIE A TUTTI e soz per la nabbaggine
Salve a tutti,
ho provato diverse volte ad installare macOS sul mio laptop ma sempre senza successo, non riesco mai ad arrivare nemmeno all'installer!
Ho tentato ormai diverse configurazioni/driver ma non capisco mai da cosa siano derivanti gli errori o i blocchi che mi trovo davanti e sto quindi cercando aiuto per capire come procedere
Nello specifico il config che sto provando ad utilizzare non mi trova per niente la partizione con l'installer, mentre un altro vecchio (presente sempre nella cartella di clover allegata con estensione .orig) si inchioda subito dopo la scelta della partizione di avvio.
Qualcuno mi sa dare una mano su come superare ciò?
Grazie in anticipo,
P.S. Le mie specifiche sono:
- Modello ASUS N552VW-FI202T
- Schermo 3840x2160
- CPU Intel Core i7-6700HQ
- RAM 16GB ddr4 2400mHz
- Intel HD Graphics 530 + nVidia 960m 4GB (anche funzionasse solo la Intel sarebbe perfetto)
- SSD 256GB
- HDD 1TB
I was inspired by @duduclx post for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5. Everything works perfectly (including sleep with the solution described later in this thread). I'm starting this thread hoping to help others install Mojave on their E6410s. This thread is not currently intended to be an installation guide and is better suited to the intermediate/advanced hackintosher. Eventually, it may evolve into a guide.
I started with this thread and ended up with the system captured in the attached files. The keys were to change the LPCB._DSM.Name to "3b09" and remove all CLOVER configs not necessary for Mojave, plus some other items mentioned below.
My system is as follows:
Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.6 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 6 developed by @Dr. Hurt and compiled by @bronxteck), not the original version), USBInjectAll (with custom SSDT-UIAC), VoodooSDHC.kext (configured as shown here). Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961
Configuration items that may be different from what you have seen in other E6410 configurations
LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)
What is NOT working:
Sleep is not working with the files attached to this first post, but I have found the solution for sleep/wake. Read Known Issues below. Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings. The slider appears in Display settings (because of the backlight DSDT injection in AGP.VID._DSM), but the slider doesn't work (yet). Haven't spent time to figure this out, but would love help. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
What is NOT tested:
Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS)
What IS working:
Everything else not mentioned above. Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar). Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP. Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: here) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter) Camera SD Card Reader
Known issues and their solutions
AAPL,clock-id and device_type do not appear in IORegistry for EHC1. Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2. This has been completed and tested, but does not fix the sleep behavior. This fix is not reflected in the attached files. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used. Switching to the "Refined ALPS TouchPad driver" is a big improvement. I've implemented and tested this on my system. The ALPS version of VoodooPS2Controller.kext mixes up a few keys. Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European. The updated VoodooPS2Controller.kext is not reflected in the attached files. This proposed configuration uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load. While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m). This AGPM method is discussed later in this thread. I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior and have not updated attached files to reflect this change. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer). It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra. If I "Inject NVidia" via CLOVER, IOHWControl loads properly. I have made this change and am testing it on my system, but have not updated the attached configuration files. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT). In the method, the expression If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS. I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS. While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17. Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The DSDT patch that duduclx refers to as "Intel GMA Ready" in his El Capitan Guide is not applied correctly to the DSDT attached to this post. Somehow, the contents of patched _DSM are located in the PCI0.VID device instead of in Method (_DSM) within the PCI0.VID device. MaciASL didn't complain about this, so it went unnoticed, but it doesn't appear to have had any affect. I have completely removed this "Intel GMA Ready" patch from my DSDT since it is not necessary for Dell Latitude E6410's with NVidia 3100m, but have not updated the attached DSDT. The assigned value of ACOS in the DSDT is conditional on the operating system. There is no condition for "Darwin." The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc), analogous to the assignment of OSYS. I made this change in my DSDT (not yet reflected in the attached files), but have not observed any behavioral differences (sleep or otherwise). EDIT: Another way to handle this might be to override _OSI with XOSI (defined in a custom SSDT). Still learning about XOSI and haven't yet drawn a conclusion. I'm currently experimenting with ACOS and OSYS equivalent to Win7 and Linux (manually patched in my DSDT which has not yet been updated as a new attachment to this post). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port. I believe that this should be an internal USB port (portType=2). My custom SSDT-UIAC.dsl is wrong. I just learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs. The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15. I have not attached an updated SSDT-UIAC.aml to this first post, but my current EFI includes an updated SSDT-UIAC.aml with ports HP15, 16 17 and 18 set to internal (portType = 2). This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working. There are minor differences between a real MacBookPro6,2 IORegistry dump and this HackBookPro6,2 IORegistry dump that can be resolved with simple DSDT edits. I am now running with these changes, but haven't found these changes to make any difference in operational behavior. These changes are not reflected in the attached DSDT.
Rename Device (AC) -> Device (ADP1) Remove UID from Device (HPET) Add compatible ID "PNP0C01" to Device (HPET) Change ADP1:_STA from 0x0F to 0xFFFFFFFF Enable Ambient Light Sensor and renamed to Device (ALS0) from Device (ALS) Add compatible ID "smc-als" to ALS0 Rename LID -> LID0 Change "name" definitions to Buffers in _DSM methods Rename Device (PBTN) to PWRB Rename Device (SBTN) to (SLPB) Change HDAU.hda-gfx from "onboard-1" to "onboard-2" Change GFX0.hda-gfx from "onboard-1" to "onboard-2" Sleep / Wake does not work with the basic DSDT edits. I have discovered that Sleep / Wake can be made to work by adding discrete graphics _OFF() and _ON() methods to _PTS and _WAK methods respectively (borrowed the concept and code from a working E6430 DSDT: Credit here: https://osxlatitude.com/forums/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/page/6/. I currently have sleep working on my Latitude E6410 and am continuing to test it. The solution is documented later in this thread, but files are not yet attached to this first post. After applying Mojave updates, HWMonitor may not display discrete graphics attributes. On systems with multiple displays, a second (or third display) may not be active after applying the Mojave update. The solution to this is to run "sudo kextcache -i /" (in a terminal window) and reboot. This will usually fix the issue. If the issue is not fixed, run DosDude's Post Install Utility, apply the Legacy Graphics Patch, reboot and then run "sudo kextcache -i /" if necessary.
Brief Installation Guide (for the experienced Hackintosher):
Follow duduclx's guide for BIOS config Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD. When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext. Also, do not install the DosDude SIP kext (you're using CLOVER to manage SIP). Install the following kexts in /Library/Extensions: ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original) Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys). Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application
Tips for Improved Performance (on this and other older systems)
System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"
If your fan is always running and temps are good, try pressing Fn + z