Jump to content
neotec00

Acer Aspire V3-772G

50 posts in this topic

Recommended Posts

Advertisement

Hey guys, i have the exact same laptop and ive installed OS X Mojave... Its working fine except i do not have any audio aswell as the intel 6400HD 7mb issue aswell...

I followed all of the steps that have been desribed here however when i did this, my Intel HD 6400 dissapeared and not Nvidia... Would you perhaps know why?

I went on to use the same config file and SSDT and DSDT files. However, when i do this i get stuck on boot with "voodooTSCsync".

Share this post


Link to post
Share on other sites
3 minutes ago, polyzargone said:

Only 4 kb?

Apparently... also thought it was weird... is it the right one ?

Share this post


Link to post
Share on other sites

Apologies, I am not sure what happened , however I have compressed it to zip now but the file is larger than 10 mb so I uploaded it on Gofile ;  https://gofile.io/?c=PTj8Vt

Btw, my DSDT and SSDT are the ones that I patched myself, following the instructions on this thread. Another thing is that there is several config files, however the one that I'm using is "config.plist".

 

Thanks a lot for helping me!

 

Share this post


Link to post
Share on other sites

Hey, did that now however when i try to boot i get stuck on "VoodooTSCSync: Version 1.5.0 starting on OS X Darwin 18.2".

 

Share this post


Link to post
Share on other sites

There's no VoodooTSCSync.kext in my CLOVER folder. Did you installed kexts in /Library/Extensions?

 

If so, delete them.

And btw, do the same if you've installed kexts in /System/Library/Extensions

Share this post


Link to post
Share on other sites
Posted (edited)

Alright ill try but right now i cant boot as theres no other configs... I removed them when i replaced the folder that you provided. Is there anything that i can do sort of boot into safe mode to access it and delete the kexts?

Edited by gacken

Share this post


Link to post
Share on other sites
Posted (edited)

Alright, i reinstalled MacOS on my laptop, changed the clover folder and now when i attempt to start i still get the exact same message> "VoodooTSCSync: Version 1.5.0 starting on OS X Darwin 18.2".

 

I checked the kexts at /System/Library/Extensions  and there was nothing there that had to do with Voodoo...

15612925534056671079704371792581.jpg

Edited by gacken

Share this post


Link to post
Share on other sites
Posted (edited)

I see NULLCPUPowerManagement:start in your picture.

I never provided such kext in my CLOVER folder so I think you didn't make a clean install (meaning totally erase the macOS partition and reinstall macOS from scratch). I think you just installed over your existing install and that's not gonna work since your system seems to be corrupted by some automatic tools :thumbsdown_anim:.

Edited by polyzargone

Share this post


Link to post
Share on other sites

I did erase the disk with the disk utility when reinstalling macos, i also made a new partrition...

Share this post


Link to post
Share on other sites

What i did was that i booted on the usb that has OS X Mojave on it and launched the installation from there. Once i was in i downloaded network drivers via usb transfer with another usb, downloaded your Clover folder and replaced it with the one i had. Then i restarted my laptop and selected my drive as usual on the clover boot menu, then i get stuck on th eline that is shown on the picture.

Share this post


Link to post
Share on other sites

Just replace the EFI/CLOVER by mine on your USB stick. Boot on it and when macOS install is complete, reboot on the same USB stick to boot Mojave. When you're on the desktop, mount the EFI of your USB stick and copy/paste the EFI folder to your EFI's drive.

Share this post


Link to post
Share on other sites

Okay, however how should i access my USB stick as it is formatted for Mac and the only "mac" i have is the one that is stuck on boot... is there any way to start in "safe mode"?

Share this post


Link to post
Share on other sites

I got the installer from hackintoshzone...

And i used programs on my windows to reformat the usb

Share this post


Link to post
Share on other sites

That's why it's full of garbage!

 

At this point, I can only recommend you to grab a Mac or a functional Hack and make the install USB stick on it. Another option is to use a VM on Windows such as VirtualBox or VMWare Workstation.

 

Check this out :

 

Share this post


Link to post
Share on other sites

Haha yes it is!!!

At this point i dont even know if im going to do this, ill check out the link you sent but worst case scenario ill upgrade to windows 10...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By verdazil
      Notebook: Acer A315-53-34MP, High Sierra 10.13.6 && Mojave 10.14.6 installation
       
      Hardware
      CPU: Intel® Core™ i3-8130U, 3400 MHz
      Memory: Kingston, DDR4, 2x4Gb, 2400 MHz
      Video: Intel UHD620 (integrated)
      Display: CMN N156HGA-EAB [15.6" LCD] (embedded)
      External monitor: LG TV 42LF650V
      SSD: Leven JAJS300M240C, 240 Gb (replacement)
      Chipset: Intel Sunrise Point-LP
      Sound: Intel Kaby Lake HDMI + Realtek ALC255
      LAN: Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter
      Wi-Fi + Bluetooth: Broadcom BCM94352Z (replacement)
      Touchpad: ELAN0504 
      Cardreader: Realtek PCIE RTS5289
      VGA WebCam
      Mac model: MacBookPro14,2
      MacOS versions tested: High Sierra 10.13.6 (17G8030) && Mojave 10.14.6 (18G95)
       
      Here is what I used to install and configure the system:
      - Video settings: https://www.insanelymac.com/forum/topic/334899-intel-framebuffer-patching-using-whatevergreen/?tab=comments#comment-2627217
      - Wi-Fi + Bluetooth: https://github.com/acidanthera/AirportBrcmFixup && https://github.com/RehabMan/OS-X-BrcmPatchRAM/blob/master/README.md
      - Touchpad and cardreader: https://voodooi2c.github.io
      - Clover version: v2.5k r5033 
      - The results of the work of many developers in this and other forums.
       
      What works?
      - Video: FullHDx60Hz accelerated video on embedded and external (HDMI) monitors
      - Sound: embedded and external (HDMI)
      - Microphone
      - Touchpad (gestures)
      - Cardreader
      - Wi-Fi
      - USB2 && USB3 ports
      - LAN
      - Bluetooth
      - VGA WebCam
      - Sleep mode
      - Display brightness and volume control using function keys
      - Battery Indication
      - Automatically dimming the screen when the laptop is running on battery power
      - Sound notification when external power is connected
       
      What does not work?
      -
       
      How to use
      1. Update BIOS to version 2.02. Secure boot must be disabled, Touchpad settings - Advanced
      2. To make a bootable flash drive, you can use my EFI directory (link at the end of the message) Tested for High Sierra 10.13.6 (17G8030) && Mojave 10.14.6 (18G95) && Catalina 10.15 (19A558d) installation.
      Note: you must insert your own SeralNumber && MLB && ROM in the config.plist file.
      3. After installation, just copy EFI directory from flash drive to the system drive.
      4. Install kexts BrcmFirmwareRepo.kext && BrcmPatchRAM2.kext to the /Library/Extensions and update system caches.
       
      Link: https://drive.google.com/open?id=11vTmPKjQUSEs2ddUzgwXG9A59EcDMrCs
    • By benmills1
      Hi, i can someone help me with installing mac OS Mojave on my HP ENVY - 15-as102na?
      I have an imac to use for setting up my usb & installing MacOS Mojave.There are various kext files etc that i'm not sure about and need some help as some are hardware specific.
      I tried previously but got stuck on an apple logo and couldn't get past that, and tried today and had problems with Clover.
      Once i get mac os on my 128gb m.2 ssd ( which i'll upgrade to either a 256gb or 512gb depending on how well this hackintosh works)
      I have a free 2.5" inch hdd bay where i'd like to install windows on in the future.
      I think i may have to replace my wireless card ( based on a few google results) which i'm fine with as long as i can see it working without just so i know i won't waste money
      Specs:
      Cpu: i5 7200u
      GPU: HD 620
      8GB ram
      Wifi card- Intel Wireless 7265 ( Intel® 802.11ac (2x2) )
      Motherboard - HP 81D2 & BIOS version is f.56
      https://support.hp.com/gb-en/document/c05311862
      Thanks
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/forum/download/file.php?id=25033
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/download/file.php?id=24376
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Pro and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Pro, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8700k, 9600k, 9700k, 9900k
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
      There Is No Better Guide Then The One That @glasgood Has Already Written So Just Follow He's Guide For a Perfect Install.     
       
       
      HARDWARE USED
      • Intel I9 9900k 
      • Gigabyte AORUS Z390 PRO
      • Sapphire Nitro+ SE Vega56 ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 16GB @3200mhz (2 x 8GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • Coolermaster MASTERLIQUID ML360R RGB CPU Cooler
      • Samsung 970 EVO 1TB NVMe SSD macOS Mojave
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       
       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
       
       
      CLOVER  FOLDER
      Use this folder with fully patched DSDT
      Z390 Pro DSDT EFI.zip   (Updated 21 July 2019)
       
       
      ADDITIONAL DSDT's  (A big thanks to @MaLd0n for compiling these extra DSDT's)
      If your using a Vega 56/64 or Radion VII then use this DSDT (already installed in my EFI)
      DSDT.VEGA.VII.zip
      If your using a RX Series or Nvidia GPU then use this DSDT
      DSDT.RXxxx.NVIDIA.zip
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://olarila.com/forum/viewtopic.php?f=19&t=1131 
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      Clover
      Clover Configurator
      Kext Updater
       
       
      OPTIONAL DOWNLOADS
      AirportBrcmFixup.kext    (If your Wifi Card isn't working after installing my EFI then add the AirportBrcmFixup.kext to your clover kext folder and reboot)
      FakeSMC    (Can be used instead of VirtualSMC)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F10)
       
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • BIOS → Windows 8/10 Features → Other OS
      • BIOS → CSM Support → Enabled  (Can be set to disabled depending on what GPU you use)
       
      • MIT → Advanced Memory Settings  → Extreme Memory Profile (X.M.P) → Enabled  
       
      • Peripherals → Initial Display Output → PCIe 1 Slot
      • Peripherals → Trusted Computing → Security Device Support →  Disable
      • Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support →  Disable
      • Peripherals → USB Configuration → Legacy USB Support →  Enabled
      • Peripherals → USB Configuration → XHCI Hand-off →  Enabled
      • Peripherals → Network Stack Configuration → Network Stack →  Disabled
      • Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
       
      • Chipset → Vt-d → Enabled  (can be enabled or disabled, your choice)
      • Chipset → Internal Graphics → Disabled
      • Chipset → Audio Controller → Enabled
      • Chipset → Above 4G Decoding → Disabled 
       
      • Power → Platform Power Management → Enabled
      • Power → ErP → Enabled  (can be enabled or disabled, your choice)
      • Power → RC6 (Render Standby) → Disabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS
       

       

       

       

       

       

       

       

       

       

       

       

×