Jump to content
MaLd0n

[Guide] Asus Z97M-PLUS on Mavericks / Yosemite / El Capitan / Sierra / DSDT

85 posts in this topic

Recommended Posts

Now have a Olarila app, just download app and clover folder for your Chipset!
 

Install MacOS with Olarila Image, Step by Step, Install and Post Install

 

https://olarila.com/forum/viewtopic.php?f=50&t=8685

 
MOBO.png
construction.gif
Create a bootable copy of macOS Sierra
Check out the link
 
--Install Clover in USB stick UEFI mode
 
--Replace Folder
 
--Install System and boot with USB STICK!beachball.gif
--Install Clover in UEFI mode and replace with my folder 
Mavericks / Yosemite
El Capitan / Sierra
 
--Reboot and activate video!
 
Bingo!
 
Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!boxing.gif
idea.gif
If you need DSDT edit...
-Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen)
-Post Ioreg, extract with Ioreg Explorer
-Run it, post files generate in your desktop
 
--DSDT
My DSDT
 
Patches 
-FIX ERRORS AND WARNINGS
-HPET
-SATA
-SLPB
-EHCx
-DARWIN
-LPC
-XHCI
-HDEF
-RTC
-IRQs
-SBUS
-BUS1
-MCHC
-HDMI
-ALS0
-SHUTDOWN
-LAN
-PNLF
--SSDT
Generate your SSDT Power Management, use ssdtPRGen Piker-Alpha
run in terminal
curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh
chmod +x ~/ssdtPRGen.sh
sudo ~/ssdtPRGen.sh

ssdtPRGen.command.zip

 

--SSDT i74790K

SSDT.i7 4790K.zip

 

--IOREG

iMac.ioreg.zip

 

Clear NVRAM, Purge and Kextcache
 
01.png
02.png
03.png
04.png
stock coolerdente.pngand Rio 40ºthumbsdown_anim.gif 
 
--FakeSMC
--Audio
--USB
--LAN
welcome.gif
 
Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!

Share this post


Link to post
Share on other sites
Advertisement

That’s a great topic. Followed your guide and managed to install, and run, Sierra. I’ll come back very soon in the next days to ask for help in fine tuning, if you don’t mind!

 

Thanks again for sharing!

 

Francesco

Share this post


Link to post
Share on other sites

Hi MaLd0n,
I’m really not capable of doing the SSDT “thing”. I’ve tried with PikerAlpha script several time before, but I don’t have the knowledge to understand what I’m doing.
 
Could you help me generating It?
 
The file you requested are attached.
 
Thank you very much!!
 

iOREG.zip

origin.zip

Send me.zip

Share this post


Link to post
Share on other sites

Hello MaldOn. First of all, thanks for the great job you do !

Here is the case : I Have a MB asus z97m-plus with a i3 4330 processor. I succeed to install OS X el capitan, everything works perfectly, but I would like to have a dsdt and ssdt. I tried to use your dsdt file for the MB, but it doesn't work, the forbidden sign appears when booting.And I am really not good with dsdt and ssdt editing...Could you help me a bit to do that ?

Here are all my files.

Thanks again !

 

CLOVER.zip

 

Lorenz’s iMac.zip

 

Send me Lorenz’s iMac.zip

Share this post


Link to post
Share on other sites

Hello MaldOn. First of all, thanks for the great job you do !

Here is the case : I Have a MB asus z97m-plus with a i3 4330 processor. I succeed to install OS X el capitan, everything works perfectly, but I would like to have a dsdt and ssdt. I tried to use your dsdt file for the MB, but it doesn't work, the forbidden sign appears when booting.And I am really not good with dsdt and ssdt editing...Could you help me a bit to do that ?

Here are all my files.

Thanks again !

dont need ssdt, try it, replace full folder, reboot and send me new ioreg

CLOVER.zip

Share this post


Link to post
Share on other sites

Thanks. I just tried to replace with your folder, doesn't work. Same as before, very long for booting, and next appears the forbidden sign.


And here is my new Ioreg when booting without the dsdt.aml.

 

 

Lorenz’s iMac.zip

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Simon's InsaneMac
      Hi, I'm kind of lost when scrolling to Clover Configurator, so I decided to use an EFI from the web and just configure the most basic stuff. But that sadly didn't work, im always getting the attached screen IMG_0054.HEIC (and I don't know whether all the errors are listed, as I can't scroll). 
      Anyways I thought it'd be better to do a custom setup. Can anyone give me some help with what to choose in the settings? Here's my rig:
      i7 8700k
      Asus z370-G (Rog Strix)
      gtx 1060 6gb
      samsung ssd (SATA)
      WD hard drive
       
      Your help would be much appreciated!
    • By kylon
      A big thanks to wegface for teaching me a lot of things.
       
       
      Tested on Catalina 10.15.4 and Clover EFI 5104 (Catalina Patcher)
       
      Not Working:
      - realtek sd card reader (pm me if you have a fix)
       
      Notes:
      **CPU patches are disabled, if you are using a locked BIOS you must enable them**
       
      Clover EFI:
      - Install it in UEFI Mode and change your hdd partition table to GPT.
      - You will be able to install ANY OS in EFI mode, even if this pc does not support EFI at all! (No guide available for this)
       
      You will need:
      My unlocked BIOS (OPTIONAL) (here) Latest Clover config from CCE Bank (here) (asus k53sj-kylon) Rehabman Voodoo PS2 Controller (here) acidanthera AppleALC (here) acidanthera Lilu (here) acidanthera VirtualSMC (here) acidanthera SMCBatteryManager (here) acidanthera SMCLightSensor (here) acidanthera WhateverGreen (here) Mieze Realtek RTL8111 (here)
    • By kushwavez
      A really good motherboard with macOS compatible bult-in Wifi & Bluetooth

      ASUS Z170-Deluxe (with Wifi)
      BIOS: v3801
      CPU: i7-6700K 4.0 to 4.2 GHz (w/o OC)
      RAM: 1x 16 GB Corsair DDR4 2400 MHz
      GPU: Intel HD 530 (Headless) & ASUS Radeon RX 5700 OC 8 GB
      Audio: ALC 1150
      Ethernet: I219V2, I211-AT
      WiFi & Bluetooth: Broadcom BCM94360HMB Half-Mini-PCI-E
      More Specs: https://www.asus.com/Motherboards/Z170-DELUXE/specifications/
       
      Catalina 10.15.4 - Windows 10
      What is working:
      BCM94360HMB Wifi and Bluetooth AirDrop, Handoff, FaceTime, Messages, App Store, iCloud, etc. Intel HD 530 (QE/CI tested, but now I'm using it in headless) Sleep RX 5700 (QE/CI with 2 1080p monitors connected) Sound USB Ports Two Ethernet ports macOS with a light OC (4.12 GHz - 4.5 Ghz, XMP, ASUS optimal) No problem so far ASUS HyperKit with a KINGSTON NVMe SSD - 250 GB  
      What is not working:
      -  
       
      Not tested:
      VideoProc says that Hardware Decoding\Encoding is fully supported and enabled on both HD 530 and RX 5700 but I didn't test it Thunderbolt (no equipment)  
      Issues:
      None  
      BIOS Settings:
      Boot\CSM (Compatibility Support Module): Launch CSM: Disabled Boot\Secure Boot: OS type: Other OS Secure Boot State: Disabled Advanced\System agent (sa) Configuration: VT-d: Enabled Graphics Configuration: Primary Display: Auto iGPU Multi-monitor: Enabled RC6(Render Standby): Enabled DVMT Pre-Allocated: 128M Advanced\PCH Storage Configuration: SATA Mode Selection: AHCI HyperKit: Enable (if you have NVMe SSD with ASUS HyperKit) Advanced\CPU Configuration: Intel Virtualization Technology: Enabled CPU- Power Management Control: Intel SpeedStep: Enabled CPU- C-States: Enabled Intel SpeedShift: Enabled  
      Getting ready for installation:
      Download the bootpack (Clover v5106): Click here -> asus-z170_clover_5107.zip  
      Installation:
      Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager) Copy my Clover folder to the USB's EFI folder Boot with the Installer USB If you have any problem (kp or freeze) boot with config_debug.plist to see what causes the issue  
      Post Installation:
      Download Clover Configurator and generate a new Serial Number for yourself  
      Some pictures:
       

       




       
       
       
      Catalina & Windows 10 Dual-Boot (clean install, on one drive):
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac)
       Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart
      Boot into your Win installer, Format the partition you created for Win, install. 
      Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: 
      bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi  
      You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)  
      Mounting EFI from Windows:
      Open cmd in administrator mode and type: mountvol b: /s (This will mount your EFI) Open Total Commander or Explorer++ in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI)  
      Notes:
       
      2020.03.26: Updated to 10.15.4 -> Updated WhateverGreen, Lilu -> Updated Clover to v5107
      2020.03.23: Removed "EmuVariableUefi.efi" -> deleted, caused false nvram map, now it's native, updated Clover to v5106
      2020.02.11: Updated to 10.15.3 -> No problem when/after installing
      2020.01.19: Added ASUS HyperKit NVMe SSD to the "What is working" list
      2020.01.12: Tested system with OC, added more informations to BIOS settings
      2020.01.11: Added SmallTreeIntel82576.kext for 2nd Ethernet, Tested Ethernet ports
      2020.01.11: First upload
       
×