Jump to content
MaLd0n

[Guide] macOS Sierra 10.12.x on ASUS H61M-A / DSDT

31 posts in this topic

Recommended Posts

Now have a Olarila app, just download app and clover folder for your Chipset!
 
H61MA_line.jpg
 
Create a bootable copy of macOS Sierra
Check out the link
 
--Install Clover UEFI in USB stick
 
--Replace Folder
 
--Install Sierra and boot into system!
 
--Install Clover UEFI and replace with my folder 
 
--Reboot and activate video!
 
Bingo!
 
Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!
 
If you need DSDT edit...
Run it
 
--DSDT
My DSDT
 
Patches
-FIX ERRORS AND WARNINGS
-HPET
-SATA
-SLPB
-DARWIN
-EHCx
-LPC
-HDEF
-RTC
-IRQs
-SBUS
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-LAN
-PNLF

Clear NVRAM, Purge and Kextcache

 
 
--FakeSMC
--Audio
--USB
--LAN
 
Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!

Share this post


Link to post
Share on other sites
Advertisement

Eu precisava responder o Quiz antes de postar no forum.

 

Segue a pergunta novamente.

 

Cara, encontrei esse teu post aqui e me ajudou bastante. Acabei de montar um hack com essa placa que eu tinha parada qui em casa. O DSDT que tu postastes resolveu meu problema de reboot. Mas fiquei com um quando mando repousar. A máquina entra em estado de repouso mas dois segundos depois volta sozinha :/
Não consegui resolver de jeito nenhum. Isso acontece contigo também?

Share this post


Link to post
Share on other sites

Usa o sleep, espera acontecer o problema e depois roda esse comando no terminal

log show --style syslog | fgrep "Wake reason"

se for preciso instale o "command line" primeiro

xcode-select --install

Share this post


Link to post
Share on other sites

Aqui o registro do syslog:

 

Apr 13 01:46:22 iMacdeLeonardo kernel[0]: Wake reason: GLAN EHC2

Apr 13 01:46:34 iMacdeLeonardo kernel[0]: full wake request (reason 1) 8147 ms
Apr 13 01:57:29 iMacdeLeonardo kernel[0]: Wake reason: GLAN EHC2
Apr 13 02:02:40 iMacdeLeonardo kernel[0]: Wake reason: GLAN EHC2
Apr 13 02:03:37 iMacdeLeonardo kernel[0]: Wake reason: GLAN EHC2
Apr 13 02:04:34 iMacdeLeonardo kernel[0]: Wake reason: GLAN EHC2
Apr 13 02:09:45 iMacdeLeonardo kernel[0]: Wake reason: GLAN EHC2
Apr 13 02:10:00 iMacdeLeonardo kernel[0]: full wake request (reason 1) 11602 ms

Share this post


Link to post
Share on other sites

Extraia o seu DSDT original com a tecla f4 na tela de boot do clover, o arquivo vai ser gerado dentro da pasta Clover/Acpi/origin.

Me envia essa pasta toda.

Share this post


Link to post
Share on other sites

Funcionou, meu velho.

 

Vou fazer um diff entre os três dsdt,s diferentes , original, o primeiro que tu postastes e esse, pra ver quais parches tu adicionastes e tentar entender um pouco melhor essa edição.

 

Valeu!

Share this post


Link to post
Share on other sites

@MaLd0n

Instalei o Sierra em um PC que não estava usando com uma Asus H61M-A/BR e um i3 3250. Tudo certo na instalação que fiz seguindo seu post mas estou com problemas no vídeo (estou usando a GPU integrada), tanto na resolução como no desempenho (está ocorrendo alguns glitches e o Lauchpad, por exemplo, demora a ser desenhado). Você teria alguma sugestão?

Share this post


Link to post
Share on other sites

@MaLd0n

Instalei o Sierra em um PC que não estava usando com uma Asus H61M-A/BR e um i3 3250. Tudo certo na instalação que fiz seguindo seu post mas estou com problemas no vídeo (estou usando a GPU integrada), tanto na resolução como no desempenho (está ocorrendo alguns glitches e o Lauchpad, por exemplo, demora a ser desenhado). Você teria alguma sugestão?

o próprio clover deve resolve o problema

 

tenta com InjectIntel

nao entendi na parte de instalar o clover no pendrive ... pode me explicar o passo a passo no drive maker ja deu tudo certo ...

instalar o clover no pen drive, altere o local da instalação do clover, setando para o pen drive

Share this post


Link to post
Share on other sites

o próprio clover deve resolve o problema

 

tenta com InjectIntel

 

Tentei com o Inject Intel no Clover e a tela de login aparece cheia de artefatos (impossível ver algo). Estou usando a DSDT que você postou, algum problema com o Inject Intel? A VRAM está selecionada no BIOS como 64MB.

O problema da resolução resolvi mudando a conexão de HDMI para DVI mas os glitches continuam, assim como o desempenho lento.

Share this post


Link to post
Share on other sites

obrigado pela resposta , entao cheguei a testar isso porem diz que o sistema é incompatível deu a opção de continuar mesmo assim porem não consegui fazer o boot pelo pendrive na bios a opcão uefi não aparece contida no pendrive...


tem algum tutorial pra esta placa em especifico H61M-A/BR? pois este aqui esta bem resumido, vou precisar de outro mac já funcionando ou consigo fazer o pendrive pelo windows?

Share this post


Link to post
Share on other sites

@MaLd0n

Depois de atualizar para o High Sierra, o dispositivo de áudio deixou de ser detectado. Estou usando sua DSDT e, no Sierra, era detectado nativamente o áudio. Alguma sugestão?

Share this post


Link to post
Share on other sites

No meu caso o audio com o patch não funcionou,a rede funcionou,menos o audio.

O lilu e o AppleALC estão na pasta do clover.

Maldon,poderia me ajudar??

Abraços e obrigado!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tokia
      Hello,
       
      My desktop Hackintosh is running macOS Mojave 10.14.2 with two dedicated GPUs installed: NVIDIA GTX 1080 Ti, AMD Radeon HD 7970.
       
      The AMD GPU is used primarily under macOS and the NVIDIA one under Windows.
       
      macOS boots without issues as long as there are no displays connected to the NVIDIA GPU. If a display is connected then the display connected to the AMD GPU will become blank. The system can be accessed using Screen Sharing/VNC.
       
      There are no problems if I swap PCI-e slots for the GPUs so that the AMD GPU is in the first slot (primary GPU), but I prefer not to do this.
       
      I have tried to remove the whole PCI (bridge) device in the DSDT file and all the lines that refer to it. The PCI entries in ioreg and System Information are gone but System Information still shows an NVIDIA GPU under Graphics/Display.
       
      Many of the suggestions I have found in guides and forum posts do not seem to apply here. My problem with some of the guides and answers is that they give the solution without explaining how anything works, or they tell you what to do without explaining the reasons behind it.
       
      What else can I do? Thank you for any assistance you can provide!
       
      I have attached some files that may help you help me.
       
      DSDT_BIOS_3101.zip contains the original ACPI (*.aml) files without any patches.
      Send me Steffens-iMac.zip is a file produced by RunMe.app, and do contain simple patches to rename some devices.
      DSDT.dsl.patch is a diff of the original DSDT.dsl file and the one with the PCI devices removed (commented out).
       
      Motherboard: ASUS Rampage V Extreme (X99), BIOS version 3101 (macOS does not boot with anything newer).
      Clover version: 4644 (macOS does not boot with the latest one, 4798).
       
      DSDT.dsl.patch:
      --- /Users/sl/Desktop/DSDT_BIOS_3101/DSDT.dsl 2018-12-17 05:24:30.000000000 +0100 +++ /Volumes/EFI/EFI/CLOVER/ACPI/patched/DSDT.dsl 2018-12-17 16:52:08.000000000 +0100 @@ -5,7 +5,7 @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of DSDT.aml, Mon Dec 17 05:24:30 2018 + * Disassembly of DSDT.aml, Mon Dec 17 04:01:52 2018 * * Original Table Header: * Signature "DSDT" @@ -2128,7 +2128,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2274,7 +2274,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2420,7 +2420,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2570,7 +2570,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2803,12 +2803,14 @@ If ((CSTA (Arg0, Arg1) == 0x00)) { FLAG = 0x00 - PRID (APID = 0xFF) = 0xFF + APID = 0xFF + PRID = 0xFF } Else { Local0 = APID - PRID (FLAG = 0x01) = Local0 + FLAG = 0x01 + PRID = Local0 } Return (APIC) @@ -15259,7 +15261,7 @@ ^BR2B.OSHP () ^BR2C.OSHP () ^BR2D.OSHP () - ^BR3A.OSHP () + //^BR3A.OSHP () ^BR3B.OSHP () ^BR3C.OSHP () ^BR3D.OSHP () @@ -26861,7 +26863,7 @@ } } - Device (BR3A) + /*Device (BR3A) { Name (_ADR, 0x00030000) // _ADR: Address OperationRegion (MCTL, SystemMemory, 0xE0013188, 0x04) @@ -27496,7 +27498,7 @@ { Name (_ADR, 0xFFFF) // _ADR: Address } - } + }*/ Device (BR3B) { @@ -30267,7 +30269,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -30567,21 +30569,21 @@ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4158, // Range Minimum - 0x0000, // Range Maximum + 0x4158, // Range Maximum 0x0000, // Translation Offset 0x0001, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x5758, // Range Minimum - 0x0000, // Range Maximum + 0x5758, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x5858, // Range Minimum - 0x0000, // Range Maximum + 0x5858, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) @@ -37604,7 +37606,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -37904,21 +37906,21 @@ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4558, // Range Minimum - 0x0000, // Range Maximum + 0x4558, // Range Maximum 0x0000, // Translation Offset 0x0001, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4259, // Range Minimum - 0x0000, // Range Maximum + 0x4259, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4359, // Range Minimum - 0x0000, // Range Maximum + 0x4359, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) @@ -44941,7 +44943,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -45241,21 +45243,21 @@ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4958, // Range Minimum - 0x0000, // Range Maximum + 0x4958, // Range Maximum 0x0000, // Translation Offset 0x0001, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4559, // Range Minimum - 0x0000, // Range Maximum + 0x4559, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4659, // Range Minimum - 0x0000, // Range Maximum + 0x4659, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) @@ -53823,7 +53825,7 @@ Notify (\_SB.PCI0.BR2D.H007, Local0) } - If ((\_SB.PCI0.BR3A.PMEP == 0x01)) + /*If ((\_SB.PCI0.BR3A.PMEP == 0x01)) { Local0 = \_SB.PCI0.BR3A.PMEH (0x05) } @@ -53848,7 +53850,7 @@ Notify (\_SB.PCI0.BR3A.H005, Local0) Notify (\_SB.PCI0.BR3A.H006, Local0) Notify (\_SB.PCI0.BR3A.H007, Local0) - } + }*/ If ((\_SB.PCI0.BR3B.PMEP == 0x01)) { @@ -54608,11 +54610,11 @@ \_SB.PCI0.BR2D.PMEP = 0x01 } - If ((Local1 == 0x07)) + /*If ((Local1 == 0x07)) { \_SB.PCI0.BR3A.PMES = 0x01 \_SB.PCI0.BR3A.PMEP = 0x01 - } + }*/ If ((Local1 == 0x08)) { @@ -54879,10 +54881,10 @@ Notify (\_SB.PCI0.BR2D, 0x02) } - If ((\_SB.PCI0.BR3A.DEVS () != 0x00)) + /*If ((\_SB.PCI0.BR3A.DEVS () != 0x00)) { Notify (\_SB.PCI0.BR3A, 0x02) - } + }*/ If ((\_SB.PCI0.BR3B.DEVS () != 0x00)) { @@ -55927,10 +55929,10 @@ { Notify (\_SB.PCI0.BR2D, 0x00) } - Case (0x28) + /*Case (0x28) { Notify (\_SB.PCI0.BR3A, 0x00) - } + }*/ Case (0x29) { Notify (\_SB.PCI0.BR3B, 0x00) @@ -56736,11 +56738,11 @@ } } - Scope (_SB.PCI0.BR3A) + /*Scope (_SB.PCI0.BR3A) { Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { - If ((Arg0 == ToUUID ("e5c937d0-3553-4d7a-9117-ea4d19c3434d") /* Device Labeling Interface */)) + If ((Arg0 == ToUUID ("e5c937d0-3553-4d7a-9117-ea4d19c3434d") / * Device Labeling Interface * /)) { If (((Arg1 == 0x02) && (Arg2 == 0x00))) { @@ -56765,7 +56767,7 @@ 0x00 }) } - } + }*/ Scope (_SB.PCI1.QR1A) {  
      DSDT_BIOS_3101.zip
      Send me Steffens-iMac.zip
      DSDT.dsl.patch
    • By Master Nin
      Ciao Ragazzi, scusate il disturbo.
      Non sono molto pratico, sto provando ad installare Sierra, però ricevo questo problema.
      Sapete aiutarmi ?
      grazie in anticipo 
      Componenti 
      AsRock H100m
      Intel Core i5 7500
      Ram HiperX
      Hi guys
      I'm not very practical, I'm trying to install Sierra, but I get this problem.
      Can you help me?
      Thanks in advance
      Components

    • By Slice
      I successfully installed macOS 10.11.6 and Windows 7 Pro SP1 in UEFI mode on the laptop.
      I know, there are detailed guides here and on osxlatitude.com but I was not agree with them and carefully check and test every step to tune my Mac.
       
      Hardware
      Intel® Core� i5-3320M CPU @ 2.60GHz, speedstep works with Clover default settings
      Chipset Intel 7 series, no patches needed
      Video: IntelHD4000 or NVS5200M switchable in BIOS, work in both cases
      LAN; Intel 82579LM, works with IntelMausiEthernet.kext v2.2.1
      Audio: IDT 92HD93BXX, works with VoodooHDA 2.9.0.
      SDHC reader O2Micro; works with native AppleSDHC.kext with Clover Arbitrary properties.
      USB3.0 works natively if not disabled in DSDT
      PS2 keyboard and touchpad works with VoodooPS2.
      WiFi: Dell Intel WiFi was replaced by Dell DW1520, Broadcom BCM943224HMS. DeviceID=4353
      LCD Screen 1366x768
      BIOS A12. Initially was A02. Then I flashed A23 and found it is quite bad. The screen is full of artefacts. Flash A12 and all is OK. Not tested other versions.
      For some reason BIOS can switched from Intel to Nvidia by itself so I have to do my solution working independent on this state.
       
      WiFi
      It is not working OOB although it has DeviceID known to Apple. The reason is WhiteList in the driver.
      I set MacModel as MacBookPro10,1 while the WiFi will work on MacBookAir. I make a patch in Clover.
      As well a patch for channels.
      I deleted a kext Brcm4331 because it has the same DeviceID. Let kext Brcm4360 to work alone.
       
      VideoCards
      In Bios we can set Optimus = Enable/Disable
      If Enable then we have two videocards Intel first and Nvidia second. In this case additional SSDT-3.aml will switch off Nvidia.
      If Disable then we have only Nvidia card. It will work if Board-ID taken from iMac13,2.
      But here there is contradiction with WiFi with required Board-ID from MacBookAir.
      So I take MacModel as MacBookPro10,1 which is most close by CPU IvyBridge.
      Set BoardID like iMac13,2 to make Nvidia working.
      Patch BoardID in Brcm4360 to make WiFi working.
      Now I have
      Inject->
      ->Intel=YES
      ->Nvidia=YES
      and SSDT-3.aml in ACPI\patched folder. This SSDT will switch off Nvidia if Intel card ON.
      For Intel graphics there is a patch against 8 apples at start.
       
      Brightness
      No special kexts.
      The brightness controlled by keys F1,F2 and slider in Control Panel in both case Intel or Nvidia. Details here  #72 
       
      DSDT and SSDT
      This is very long story and finally I have working sleep in both cases Intel or Nvidia.
       
      Sensors
      I use my HWSensors3 with FakeSMC 3.5.0.
      I got monitoring:
      CPU temperature
      GPU temperature
      GPU main frequency
      GPU shader frequency
      Battery state % full, time to charged or time to empty.
      Battery voltage dinamically.
      Battery amperage dynamically. I can see it changes on heavy games.
      HDD temperature.

       
      Audio
      I like VoodooHDA and have no problems with it.
      The sound is clear, loud, and switchable between internal speaker and headphone.
      Mic is working.
       
      Bluetooth
      Just tested with BTFirmwareUpdate.kext and it works. I not needed it so switched off by wireless switch at right side.
       
      Keyboard, Touchpad and Touchstick
      Post #14
       
      My config, ACPI files and kexts are in attachment.
      05.12.2017
      EFI.7z
       
      EDITED:
      Better DSDT in the post #6.
      Sleep working even when AC inserted.
       
      EDITED 06.12.2018
      Now I have HighSierra and this is my EFI folder
       

       
       
      Welcome to discussion!
      EFI-E6430.7z
    • By gengik84
      First beta is out... build 18D21c
    • By fantomas1
      macOS Mojave 10.14.3 beta (18D21c)
×