Jump to content
MaLd0n

[Guide] Sierra / High Sierra on Gigabyte GA H110M-S2 / DSDT

146 posts in this topic

Recommended Posts

4 minutes ago, MaLd0n said:

Looks good

final cut, in my case, e.g., Coffeelake config

-IntelGFX 0x59128086
-InjectIntel
-ig-platform-id 0x59120003
-IntelGraphics enable no bios
-DVMT to 128
-IntelGraphicsFixup.kext

-Shiki.kext

MaLd0n 2018-03-19 às 14.17.39.png

i cant run vdadecoderchecker

permission denied say terminal.

 

Captura de pantalla 2018-03-19 a las 18.22.14.png

7 minutes ago, MaLd0n said:

Looks good

final cut, in my case, e.g., Coffeelake config

-IntelGFX 0x59128086
-InjectIntel
-ig-platform-id 0x59120003
-IntelGraphics enable no bios
-DVMT to 128
-IntelGraphicsFixup.kext

-Shiki.kext

MaLd0n 2018-03-19 às 14.17.39.png

what can you say with this

"IntelGraphics enable no bios" in the bios put enable IntelGraphics?

i make this a few days but then finalcut makes bad renders, generate a file green in middle of frame.

Share this post


Link to post
Share on other sites
Advertisement
11 minutes ago, MaLd0n said:

ye, u need a hardware acceleration, all work together

MaLd0n 2018-03-19 às 14.45.40.png

yes but don't show the same like you, i send a screenchot

 the performance of finalcut is poor, when is rendering the system goes down.

is necesary shiki=12 in boot args?

thank for your help-

Captura de pantalla 2018-03-19 a las 18.54.27.png

Share this post


Link to post
Share on other sites
20 minutes ago, MaLd0n said:

with last shiki work withoutMaLd0n 2018-03-19 às 15.09.31.png

for ur GPU use IntelGFX 0x59168086

ok i delete shiki=12

an put the correct 0x59168086

seem is better but performance of system is not good.

the monitor is attached to gtx 1050 and many lags in video for example if finalcut is open safari cant see videos fine, many lags...

im forgotten...

 

I'm going to review the guides but how am I with your configuration should it work fine?

Share this post


Link to post
Share on other sites
1 minute ago, multiymedia said:

ok i delete shiki=12

an put the correct 0x59168086

seem is better but performance of system is not good.

the monitor is attached to gtx 1050 and many lags in video for example if finalcut is open safari cant see videos fine, many lags...

im forgotten...

 

I'm going to review the guides but how am I with your configuration should it work fine?

is a other problem, web driver

run it and let the script work

nvidia-update.command.zip

Share this post


Link to post
Share on other sites
2 minutes ago, MaLd0n said:

is a other problem, web driver

run it and let the script work

nvidia-update.command.zip

run it and say

378.10.10.10.25.106 is already installed.

Edited by multiymedia
incomplete

Share this post


Link to post
Share on other sites

can i try boot with only the intel gfx?

what changes have to do?

may be make one mobo like this with only intel gfx for a friend graphic designer.

 

Share this post


Link to post
Share on other sites
5 minutes ago, MaLd0n said:

the intel HD work only for Hardware Acceleration, to avoid problem in FCPX

use ur DGPU + configs above + script nvidia

i'm doing this but the system dont work fine and now final cut restart the computer. i read to somebody saying about ig-platform-id in my case must be 0x59120003 or 0x59120000? that appear in the menu of clover.

 

We will get it¡¡¡

 

Share this post


Link to post
Share on other sites
19 hours ago, multiymedia said:

i'm doing this but the system dont work fine and now final cut restart the computer. i read to somebody saying about ig-platform-id in my case must be 0x59120003 or 0x59120000? that appear in the menu of clover.

 


We will get it¡¡¡

 

ok the system is stable but performance of finalcut no.

is necesary the DSDT PATCHING PEGP -> GFX0 Patch?

i have not this entry. when you make me your runmeapp. there is only nvidia card and intel was disable in bios, ¿is posible need to make another run your app?

or simply makin you say in post :

Looks good

final cut, in my case, e.g., Coffeelake config

-IntelGFX 0x59128086
-InjectIntel
-ig-platform-id 0x59120003
-IntelGraphics enable no bios
-DVMT to 128
-IntelGraphicsFixup.kext

-Shiki.kext

 

and remember i have h110m-s2h with i5 7600 and you are talkin about cofffelake??

sorry for my clumsiness

Share this post


Link to post
Share on other sites
On 20/3/2018 at 4:21 PM, MaLd0n said:

for coffeelake we need use kabylake things, same for IGPU in both line

 

dont need pegp to gfx0

 

everything is going pretty well, it does not give me as good performance as in sierra but it is quite fine. cinebench reports 103-106 in gpu. with sierra I see 114-120. The only thing I notice that sometimes happens is that the cursor does not appear when mounting the desktop, if I click and drag or if I do command-tab then it appears.

thnks so much.

Share this post


Link to post
Share on other sites
On 20/3/2018 at 4:21 PM, MaLd0n said:

for coffeelake we need use kabylake things, same for IGPU in both line

 

dont need pegp to gfx0

 

everything is going pretty well, it does not give me as good performance as in sierra but it is quite fine. cinebench reports 103-106 in gpu. with sierra I see 114-120. The only thing I notice that sometimes happens is that the cursor does not appear when mounting the desktop, if I click and drag or if I do command-tab then it appears.

thnks so much.

 

after testing all the principal issue is finalcut. whe is open the system goes slow and laggy....

i'm reding many things about this but i cant find the solution.

Share this post


Link to post
Share on other sites

I think that i dont using well the forum, must be reading the rules.... going to do after...

 

i recompile my info about this setup. and looking for resolve the problem with finalcut. 

 

I'm going to try again with sssierra 10.12 to see if I get better performance with finalcut.

MaLd0n can I use the dsdt and the clover in sierra that you made for me in highsierra?

thnks 

 

by the way you do some beautiful photos MaLd0n

Captura de pantalla 2018-03-23 a las 15.45.07.png

Captura de pantalla 2018-03-23 a las 15.45.19.png

Captura de pantalla 2018-03-23 a las 15.45.31.png

Captura de pantalla 2018-03-23 a las 15.45.43.png

Captura de pantalla 2018-03-23 a las 15.45.49.png

Captura de pantalla 2018-03-23 a las 15.46.48.png

Captura de pantalla 2018-03-23 a las 15.47.12.png

Captura de pantalla 2018-03-23 a las 16.02.21.png

Captura de pantalla 2018-03-23 a las 16.04.30.png

Share this post


Link to post
Share on other sites
1 hour ago, multiymedia said:

I think that i dont using well the forum, must be reading the rules.... going to do after...

 

i recompile my info about this setup. and looking for resolve the problem with finalcut. 

 

I'm going to try again with sssierra 10.12 to see if I get better performance with finalcut.

MaLd0n can I use the dsdt and the clover in sierra that you made for me in highsierra?

thnks 

 


by the way you do some beautiful photos MaLd0n

Captura de pantalla 2018-03-23 a las 15.45.07.png

Captura de pantalla 2018-03-23 a las 15.45.19.png

Captura de pantalla 2018-03-23 a las 15.45.31.png

Captura de pantalla 2018-03-23 a las 15.45.43.png

Captura de pantalla 2018-03-23 a las 15.45.49.png

Captura de pantalla 2018-03-23 a las 15.46.48.png

Captura de pantalla 2018-03-23 a las 15.47.12.png

Captura de pantalla 2018-03-23 a las 16.02.21.png

Captura de pantalla 2018-03-23 a las 16.04.30.png

u can use in Sierra or High Sierra, same folder ;)

Thanks!

Share this post


Link to post
Share on other sites

Já foi atualizada para o i7 7700 Kaby lake?

 

Posso usar sua pasta do clover de boa? 

Config

Ga-H110M-S2v

I7 7700

gtx1050ti

 

Share this post


Link to post
Share on other sites
2 hours ago, Deadoc said:

Já foi atualizada para o i7 7700 Kaby lake?

 

Posso usar sua pasta do clover de boa? 

Config

Ga-H110M-S2v

I7 7700

gtx1050ti

 

U can use without problems

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
      -Donations with PicPay 
      @danielnmaldonado
      -Donation with Mercado Livre 
      https://tinyurl.com/y9evkj5u
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/ybwr9kq3
       
      -Tutorial
      https://tinyurl.com/re2c9sz
       
      -Post Installation
      Paste EFI folder into EFI Partition in your SSD, reboot and extract one full dump with this app and post here!
      https://tinyurl.com/ybwr9kq3
      RunMe.app
      https://tinyurl.com/y9562hz7
       
      --DSDT PATCHES--
       
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS -XHCI -PLUGIN TYPE -HDEF -ARTC -IPIC -TIMR -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -kUSBCompanionIndex -io-device-location -IMEI -EC -PNLF -ARPT -GFX0 -NVME -ACPI-WAKE-GPE -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--
       









































       
       
      Big Thanks to XLR and your Badass Motherboard, Ultrafast CPU, Coolest Heatsink, Huge Graphics Card, Tonnes of RAM,
      Gigantic Hard Drive, Lightspeed Disk Burner, Professional Sound Card, Massive LCD Display.
       
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community, SchmockLord, daliansky and many, many, many others!
       
      We're all here to have fun and learn from each other!
    • By tonyx86
      This thread for installing Catalina on the Dell Latitude E6410 WITH NVIDIA GRAPHICS (BIOS A17, NVidia 3100m) will help you install a fresh installation of Catalina on your Dell Latitude E6410, it will help you upgrade from 10.15.2 to 10.15.x (if you originally installed Catalina from this thread) and it will also help you upgrade from Mojave 10.14.6 if you have already installed Mojave by following the instructions here.  The instructions in this first post assume that you are installing Catalina in an APFS container.  If you are curious about the evolution of this solution and how sleep/wake was solved, review the Mojave installation thread.
       
      Important: This Thread is NOT intended to help you install macOS on a Latitude E6410 with Intel HD Graphics (without Nvidia graphics).  The DSDT attached to this first post (in E6410-Catalina.zip) is VERY SPECIFIC to the Nvidia graphics implementation and has not been edited for HD Graphics - there are elements required for HD Graphics that are missing from the attached DSDT and there are DSDT mods that have not been tested with HD Graphics.  Also, the kexts attached to this first post are specific to a Broadcom Wi-Fi card which must replace the original Intel Wi-Fi card.
       
      This first post will be modified to reflect lessons learned and to reflect the most current working state of my Latitude E6410 (with NVidia 3100m discrete graphics) running Catalina.  Issues, observations and performance tips are recorded toward the bottom of this first post.  My recommended CLOVER configuration is specified toward the bottom of this first post.
       
      *** If you want help with your installation, please post your issue along with problem reporting files generated using @black.dragon74's problem reporting tool.  Google 'GENERATE PROPER PROBLEM REPORTING FILES black.dragon74' to find it. ***.  If Catalina's Read-Only protections block your installation of black.dragon74's gen_debug script, please copy the attached gen_debug script to your Desktop, change script properties with the terminal command 'chmod a+x ~/Desktop/gen_debug' and run the script from your Desktop.
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) Wi-Fi: Broadcom BCM 94352HMB (replaced original Wi-Fi card) BIOS (version A17) configured as follows (leave default unless listed here): Boot Sequence: USB, Internal HDD, CD/DVD, Modular Bay HDD; Boot List Option: Legacy; Integrated NIC:Enabled; Parallel Port: Disabled; Serial Port: Disabled; SATA Operation: AHCI; Misc Devices: Enable Modular Bay, Camera, External USB, Microphone, Media Card and 1394; Latitude ON Reader: Disabled; Keyboard Illumination: Auto ALS and Input; Ambient Light Sensor: Enabled; OROM Keyboard Access: Disable; TPM Security: Disable; Computrace:Deactivate; CPU XD Support: Enable; Performance: Enable all options; Power Management: Disable Wake on AC, Disable Wake on LAN/WAN, Express Charge: Standard, Charge Behavior: Enabled; Keypad: Fn Key Only; Mouse/Touchpad: Touchpad/PS-2 Mouse; USB Emulation: Enable Legacy; Fn Key Emulation: Disabled; Fastboot: Thorough; Virtualization: Enable Intel Virtualization, Disable VT for Direct I/O, Disable Trusted Execution; Wireless Switch: Bluetooth and WLAN; Wireless Device Enable: Bluetooth and WLAN;   
      Versions of the software used in this installation are listed below the installation steps.  EFI and kexts for Catalina are attached to this first post in E6410-Catalina.zip.  CLOVER configuration is specified below the installation steps.
       
      Wi-Fi connection to an Access Point is delayed when using AppleALC for sound.  Do not use Apple ALC.  Use VoodooHDA pkg 2.9.2 v15 for sound.
       
      Steps to install Catalina on a Dell Latitude E6410 (BIOS A17, NVidia 3100m)
       
      If you want to upgrade to 10.15.5, see instructions at this post.
       
      If you want to upgrade to 10.15.4, see instructions at this post.  
       
      Follow instructions below for 10.15.2 and 10.15.3.
       
      Make sure that your system matches my system description above (including BIOS version, Wi-Fi card, BIOS settings) If performing an upgrade from Mojave or a previous version of Catalina, backup your Mojave or Catalina partition! (Carbon Copy or similar) Download Catalina Installer Download DosDude Catalina Patcher Use DosDude Patcher to create Catalina USB Installer Delete LegacyUSBInjector.kext (we're using @RehabMan's USBInjectAll.kext with custom SSDT) and delete SIPManager.kext (CLOVER is managing SIP) from Catalina USB Installer's /Library/Extensions folder Copy all but the FakeSMC sensor kexts in E6410-Catalina.zip (attached) LE folder to the Catalina USB Installer /Library/Extensions (copy all kexts (including FakeSMC.kext) but not the FakeSMC sensor kexts) Install CLOVER Bootloader (Legacy) on USB Installer using the EFI in the E6410-Catalina.zip (attached).  Use the CLOVER configuration specified below.  Be sure to replace the XX-MASKED-XX parameters in the attached config.plist with your own values. Reset your Latitude E6410 NVRAM by doing the following (this may be important if you're making changes to your existing EFI and won't hurt anything if you're not making any changes) turn-off your laptop remove A/C power and main battery press and hold the power button for 30 seconds restore A/C power and battery Boot your Latitude E6410 from the Catalina USB Installer that you created in steps 5-8. Select "Reinstall macOS" (note that I have existing installations of Mojave and High Sierra on my Latitude E6410, so it's possible that this menu item changes to "Install macOS" if you don't have any previous macOS installations). Select your Catalina destination partition (which will be your Mojave or previous Catalina partition if you are upgrading) After the Catalina Installer reboots the first time, boot from the "macOS Installer" partition on the disk that you selected as your Catalina destination (not the macOS installer on the USB) After the Catalina Installer reboots the second time, boot the Catalina macOS Installer on the USB Select the Post Install Patcher utility Select only the following Post Install Patches (no other patches / options) Install Patch Updater Legacy Video After the Post Install Patcher reboots,  boot from the newly installed (or upgraded) Catalina partition and complete the macOS configuration Remove these kexts (if they exist) from /Library/Extensions: LegacyUSBInjector.kext, LegacyUSBVideoSupport.kext and SIPManager.kext If you are performing a fresh installation of Catalina: Install CLOVER (LEGACY - NOT UEFI) on your boot disk and configure EFI using files in the attached E6410-Catalina.zip.  Use the CLOVER configuration below.  Be sure to replace the XX-MASKED-XX parameters in the attached config.plist with your own values. Install all kexts in the attached E6410-Catalina.zip LE folder to your /Library/Extensions folder. Copy HWMonitor from the application folder in the attached E6410-Catalina.zip to your Applications folder. Install VoodooHDA (I installed using the Classic method) Skip to Step 21 If you are upgrading from a previous version of Catalina using the instructions from this thread or from Mojave that you installed using the instructions here: Replace 3rd-party kexts in EFI/Clover/kexts/Other with those in the attached EFI folder.   Replace EFI/Clover config.plist with the attached config.plist (Be sure to replace the XX-MASKED-XX parameters in the attached config.plist with your own values) Replace EFI/Clover/ACPI/patched with the files in the attached EFI/Clover/ACPI/patched Replace 3rd-party kexts in /Library/Extensions with those in the attached LE folder Remove VoodooSDHC.kext from /Library/Extensions Re-install VoodooHDA if necessary (I installed using the Classic method for Catalina) Ensure PROPER kext installation: If you're manually installing kexts in /Library/Extensions, make sure that you execute the following (in terminal) cd /Library/Extensions sudo chown -R root:wheel *.kext sudo chmod -R 755 *.kext sudo kextcache -i / After you execute 'sudo kextcache -i /' you should observe that ALL kexts are allowed.  If not, your kext directory attributes are probably incorrect.  Repeat kext installation and try again. Reboot from your new/upgraded Catalina partition Welcome to macOS Catalina! Change the keyboard type to ISO (System Preferences > Keyboard > Change Keyboard Type) Swap the Command and Option keys (System Preferences > Keyboard > Modifier Keys) Set hibernatemode: In terminal, execute sudo pmset -a hibernatemode 0 sudo rm -f /var/vm/sleepimage sudo touch /var/vm/sleepimage sudo chflags schg /var/vm/sleepimage  
      Version Info at the time of this writing:
      Catalina Installer 10.15.5.02 CLOVER r5118 DosDude Catalina Patcher: v1.4.4 Lilu.kext 1.4.5 AirportBrcmFixup.kext 2.0.6 BrcmFirmwareData.kext 2.5.3 BrcmBluetoothInjector.kext 2.5.3 BrcmPatchRAM3.kext 2.5.3 IntelMausi.kext 1.0.3 (Not IntelMausiEthernet.kext)
      EFICheckDisabler.kext 0.5
      VoodooHDA.kext 2.9.2 v15 (NOT AppleALC)
       
      What is not working (that was working in Mojave)
      SD Card Slot (had to remove VoodooSDHC.kext which caused system freeze on wake)  
      Known Issues and Their Solutions
      (Solved - no further work required) Clover r5118 requires the config.plist key <key>NoDefaultProperties</key><false> to permit macOS to boot with Clover's "Inject Nvidia" = True.  See details here.  config.plist in the attached E6410-Catalina.zip archive includes this change. (Solved - no further work required) EFICheck is loaded.  Solution is to install EFICheckDisabler.kext which you can get here.  EFICheck.kext is included in the attached E6410-Catalina.zip archive. (Solved - no further work required) Some users experience display issues.  The solution is to remove Device (PNLF) from the DSDT.  Use the attached DSDT.  Removal of PNLF will disable sleep on lid closure.  Device (PNLF) can be added without modifying the DSDT by enabling the Clover PNLF ACPI patch.  The attached Clover config.plist enables the PNLF DSDT patch.  Disable the Clover PNLF patch if you experience display issues. (Solved - no further work required) USB sleep/wake power IORegistry keys are not injected (not included in Mojave's or Catalina's IOUSBHostFamily.kext).  Solution is to added SSDT-USBX.aml to EFI/CLOVER/ACPI/patched.  The attached SSDT-USBX.aml includes USB sleep/wake properties for MacBookPro6,2 from High Sierra 10.13.6 IOUSBHostFamily.kext. (No solution yet) Brightness slider does not work in System Preferences > Displays.  Brightness is easily controlled with Dell brightness keys.  There is some work on this later in this thread, but I will not be solving this as I'm content with the Dell brightness keys (and Ambient Light Sensor works to auto-adjust brightness). (No intention to solve) Display Settings in System Preferences are "garbled" when bright slider is visible.  This is a known issue with the legacy graphics patch and does not affect laptop operation. I continue to refine the DSDT and CLOVER config.plist to optimize my Latitude E6410 for multi-booting between various macOS versions (High Sierra, Mojave and Catalina at the time of this writing). If you upgrade your Latitude E6410 EFI using my attached EFI, you may find that your Latitude E6410 is stuck in a boot-loop that ends in a white screen and reboots.  Clear your system by doing the following: turn off your laptop, remove A/C power, remove the main battery, press and hold the power button for 30 seconds, restore A/C power and battery, boot normally.  I have only found this to be necessary (very rarely) after making an EFI change, but you may find it helpful if making kext changes in /Library/Extensions as well. (Solved - no further work required) Brcm firmware does not update when using BrcmFirmwareRepo.kext in /Library/Extensions.  Solution is to install BrcmFirmwareData.kext and BrcmPatchRAM3.kext in E/C/k/O with Clover "Inject Kexts" = YES. (Solved - no further work required) Laptop does not sleep when closing lid.  Solution appears to be a combination of adding Notify (LID0) code to Method (BTNV) and adding Device (PNLF) in the DSDT. I am using the same EFI for High Sierra 10.13.6, Mojave 10.14.6 and Catalina 10.15.3 and it works in all three macOSes. (No solution yet) No SD Card Slot (had to remove VoodooSDHC.kext) - I read somewhere that there is a solution that does not require any kexts (just a DSDT edit).  Haven't yet implemented this fix. (Not a problem that needs to be solved - leaving for historical purposes.  I am running Catalina without this.) - IOHWControl does not load under GFX0 (as observed in IORegistryExplorer).  Solution (if it needs to be solved) is to install AppleHWSensor.kext from a DosDude-patched Mojave /S/L/E in Catalina's /L/E.  Copy and install your own or use the kext attached to this post. (Solved - no further work required) Wi-Fi connection is delayed until a minute or so after boot - Use VoodooHDA and NOT AppleALC (Solved - no further work required) External USB ports do not work after waking from sleep (S3) - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Boot and shut-down time of Catalina is slower than Mojave - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Wi-Fi is not immediately available at OS startup - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Laptop freezes on wake - Remove VoodooSDHC.kext from /Library/Extensions  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z (I haven't noticed this issue for a while since I completed DSDT edits for Mojave, but keeping this here for historical purposes)  
      CLOVER Installation: Use these configuration options (Install Clover LEGACY - NOT UEFI)
      Install Clover in the ESP Boot Sectors Install boot0af in MBR Clover for BIOS (LEGACY - NOT UEFI) booting Clover EFI 64-bits SATA BIOS Drivers, 64-bit Recommended drivers FSInject File System drivers ApfsDriverLoader Install RC scripts on target volume Themes Choose your desired theme Install Clover Preference Pane After clicking "Continue", if prompted with "This Clover package is incompatible with this version of macOS," install anyway  
      After CLOVER installation is complete Copy the following from the attached E6410-Catalina.zip ACPI patched contents config.plist (change XX-MASKED-XX values to your own) kexts/Other (remove all other kext folders) Remove christmas and new year folders from themes (if present)  
      Credits
      Thanks to those who contributed to my Mojave solution and to the DosDude team (for the incredible macOS patchers), I think this Catalina installation was the easiest macOS installation that I have experienced (so far).  Many thanks to @Slice and his team for the incredible work on CLOVER and for continuing to support old legacy systems like this.  Also, thanks to @Mieze and @headkaze and others I'm sure for maintaining the Brcm kexts.  And finally, I still prefer to manually apply patches to the DSDTs in my systems.  CLOVER offers extensive patching functionality, but I'm old-school and like to have an error-free, fully-patched DSDT with a simple CLOVER config.plist.  I think that this manual DSDT patching approach (which required an extensive review and debugging of the original unpatched DSDT in this thread) is the reason that this Latitude E6410 is such a perfect MacBookPro6,2.  Thank you @RehabMan for being a great teacher and for always insisting on problem reporting files .
       
       

      AppleHWSensor.kext.zip
      gen_debug

      E6410 Catalina-5v2.zip
    • By Fantome1S
      Finaly Success to boot on Sierra 10.12.6 (16G29) with Touchscreen working theres still things to fix but everything is almost working. During the Corvid StayAtHome Period I was able and have time to make this laptop boot on MacOS after a lot of attemps before going back to job. It was the hardest laptop hackintosh install attemp i've done so far and Sierra OS is the only that works. I tried El Capitan and Mojave and its never boot so I not even tested Catalina. I searched on the web and theres no install guide for this specific laptop or no Success install post on this laptop its look like a not very well supported laptop by hackintosh. Maybe some of you can help me correct the things that still not work. Audio work but with voodo (low sound and low quality) I want to make it work with AppleALC to get better quality sound. Thanks in advance
       
      Things that work:
       
      -Touchscreen
      -Trackpad (not the gesture for now) - Backlight Keyboard
      -EthernetPort and Wireless (with a wifi dongle. I will change to a broadcom wifi mini-pci chip)
      -Brightness Controls with FN key
      -Audio Voodoo ''low sound'' (will tried to change to AppleALC or AppleHDA fix method) 
      -USB 3.0
       
      Things that not work or need to be fixed:
       
      -Weird double long booting screen-first loading bar on the right. after real loading bar is visible ?
      -Audio (Voodoo) work but with low volume sound- still not success to make work AppleALC.kext method
      -SENSORS -CPU-HDD Temperatures, BATTERY LEVEL, ETC…
      - Sleep (Disabled): USB ports not works after wake from sleep
      -Trackpad Gestures
       
      Hardware:
       
      CPU: Intel Core i7-3687U, 2100 MHz
      GPU: Intel HD Graphics 4000
      RAM: 12 GB (4GB soldered + 8 GB Samsung DDR3 1600)
      Motherboard/Laptop model: Intel Panther Point QM77, Intel Ivy Bridge - (HP Revolve 810 G1)
      Audio Codec: IDT 92HD91BXX @ Intel Panther Point PCH - High Definition Audio Controller
      Ethernet Card: Intel(R) 82579LM Gigabit Network Connection
      Wifi/BT Card: Intel(R) Centrino(R) Advanced-N 6235
      HP hs2350 HSPA+ MobileBroadband Network Adapter
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9400K, 9600K, 9700K, 9900K, 9900KS (All KF Models work but use SMBios iMacPro1,1 instead)
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, RX 5500, 5500 XT, 5600, 5600 XT, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Reference RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM94360CS2 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      CLOVER & OPENCORE EFIs 
      Current EFIs Updated 01/06/2020
       
       
      Clover EFI Update v5118 - 01/06/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
       
      Clover Z390 Master Navi Vega EFI 010620.zip - Vega, Navi (5700, 5700XT etc), Radeon VII DSDT EFI
      Clover Z390 Master Polaris EFI 010620.zip - RX500 Polaris Series (RX590, 580, 570 etc) DSDT EFI
       
      Please Note - I have now set KernelPM to No as standard so if you don’t have a unlocked MSR or not using my MSR Unlocked Bios Profile then go into the Clover Config.plist and set KernelPM to Yes or you won’t be able to boot up. An even better fix would be to unlock your MSR using my profile method.
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
       
       
      OpenCore EFI Update v0.5.9 - 01/06/2020
      Myself and @texem have now created a OpenCore EFI done the way the OpenCore Devs intended it to be made, There is no DSDT in use so you can use this EFI on any supported GPU and the SSDTs have been made so they will not be used in any other Operating System apart from MacOS.
       
      OpenCore 059 Z390 Master 19,1 010620.zip - OpenCore v0.5.9, SMBios iMac19,1
      OpenCore 059 Z390 Master 1,1 010620.zip - OpenCore v0.5.9, SMBios iMacPro1,1 (IGPU Disabled)
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
      Note 2 - Do not try to carry across your old OpenCore Config.plist to the new EFI as to many changes have occurred in 0.5.9. Use the new Config.plist instead.
       
       
      PlistEdit Pro.zip - PlistEdit Pro (use to edit OpenCore)
       
      Using PlistEdit Pro add your details by modifying the following 

       
      PLEASE NOTE - These EFIs are setup to be used with your msr Unlocked so make sure you use the F11c Unlocked Profile but if for any reason you can not unlock MSR then just modify following in the OpenCore config.plist :
      
       
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       

       

       

       

       

       

       

       
      OpenCore 058 Z390 Master 1,1 040520.zip
    • By miliuco
      Install macOS 10.15 Catalina on Gigabyte P55-USB3 with Radeon RX 580 graphics card using a USB device created with the createinstallmedia command and Clover as bootloader. Instructions to install macOS 10.14 Mojave on this computer are almost identical, replacing Catalina app with Mojave, so this article is suitable for both versions of macOS. The Gigabyte P55-USB3 motherboard (and some others from the same brand with the P55 / H55 chipset) have made it easy to build a hackintosh and install macOS since 10 years ago. Although it is an old motherboard, the behavior with Mojave or Catalina is very good after changing the classic hard drive (HDD) for a solid state drive (SSD).

      Components of the hackintosh
      Gigabyte GA-P55-USB3 motherboard: P55 chipset, 1156 socket, ALC892 audio, Gigabit RTL8111D network, DDR3 RAM Intel Core i5-750 processor for socket 1156: 4 cores, 8MB cache, clock rate 2.66 GHz Fenvi FV-T919 wireless + Bluetooth card: PCI-Express, wifi is ac type, detected by macOS as Airport and Apple Bluetooth Radeon RX 580 8 GB graphics card: works OOB but with a few details to be considered, it has its own article.  
      Previous requirements
      Install macOS Catalina app in /Applications folder USB flash drive with at least 16GB prepared from Disk Utility with MBR partition scheme and formatted as Mac Os Plus (on older Gigabyte boards like mine, USB sticks partitioned with GUID scheme instead of MBR usually hang the system when booting) Recent version of Clover (I have used r5117) Recent versions of Lilu (at least 1.4.4) and WhateverGreen (at least 1.3.9) to fine-tune the behavior of the graphics card Recent version of RealtekRTL8111 (I have used 2.2.2) FaceSMC version 6.26-322 (newer versions disable automatic mounting of USB devices on my system).  
      Create install USB
      Run this command from Terminal (assuming the target device is called USB):
      Bash: sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/USB /Applications/Install\ macOS\ Catalina.app
      Clover must be installed on the USB memory, I choose the following options:
      Bootloader > Install boot0af on the MBR CloverEFi > CloverEFI 64-bit SATA BIOS Drivers, 64 bit > Recommended drivers > FSInject + SMCHelper + XhciDxe BIOS Drivers, 64 bit > File System drivers > ApfsDriverLoader Install RC scripts on selected volume Optional RC scripts > Disable sleep proxy client.  
      You have to copy 4 kexts to the EFI/CLOVER/kexts/Other folder of the USB device: FaceSMC 6.26-322, Lilu 1.4.4, WhateverGreen 1.3.9 and RealtekRTL8111 2.2.2. Regarding the config.plist file, the most significant is:
      Boot > kext-dev-mode = 1 in Boot arguments GUI > Theme embedded, EmbeddedThemeType Dark, Screen Resolution 1920x1080, Preboot in Hide Volume Graphics > blank, nothing is checked except if foxbox solution is used to have more than 2 connectors enabled RT Variables > 0x28 in BooterConfig and 0x67 in CsrActiveConfig SMBios > iMac14,2 Sytem Parameters> Yes in Inject Kexts and check Inject System ID.  
      Install macOS Catalina

      Boot from the USB device and choose Install macOS from Install macOS Catalina. The installation program runs until the PC restarts. Here choose Install macOS from HDD (the name of the volume you are installing macOS on). With RX 580 graphics card, the screen goes black in this second phase of the installation, it is a phase in which the user has nothing to do until the PC is restarted so you can let it work until the Clover menu again. You have to choose Boot macOS from HDDto boot the installed system from the hard disk, the screen is recovered and you can configure the account and the initial options. From this moment the screen works fine.

      In summary:
      Boot from USB > Clover menu > Install macOS from Install macOS Catalina > screen works fine Boot from USB > Clover menu > Install macOS from HDD > black screen Boot from USB > Clover menu > Boot macOS from HDD > screen works fine.  
      Install Clover and kexts on the hard drive

      Clover needs to be installed on the disk where we just installed macOS. Options are the same as when installing it on the USB memory. You also have to copy the 4 kexts (FaceSMC 6.26-322, Lilu 1.4.4, WhateverGreen 1.3.9 and RealtekRTL8111 2.2.2) into the EFI/CLOVER/kexts/Other folder on the EFI partition of the disk. And review the config.plist file remembering the comments for the USB.

      If everything goes well, the computer starts from the hard disk with a running copy of macOS Catalina.
       
       

×