Jump to content
  1. biricotico

    biricotico

  2. KRoBot

    KRoBot

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By STLVNUB
      Script file to clone Clover, Opencore (official and unofficial) repos
      Script will create link to itself in /usr/local/bin/bob
      Wouldn't hurt to check there are no "Bob"'s there, i "Hope" there isn't.
      Then you only need to type bob. and a parameter
      "n" for NDK repo, unofficial
      "a" for ACID repo, official
      "c" for CLOVER
      It also takes "all" for ALL, if your game
       
      Easier typing bob than.....usual stuff
      Enjoy
       
    • By kushwavez
      A really good motherboard with macOS compatible bult-in Wifi & Bluetooth

      ASUS Z170-Deluxe (with Wifi)
      BIOS: v3801
      CPU: i7-6700K 4.0 to 4.2 GHz (w/o OC)
      RAM: 1x 16 GB Corsair DDR4 2400 MHz
      GPU: Intel HD 530 (Headless) & ASUS Radeon RX 5700 OC 8 GB
      Audio: ALC 1150
      Ethernet: I219V2, I211-AT
      WiFi & Bluetooth: Broadcom BCM94360HMB Half-Mini-PCI-E
      More Specs: https://www.asus.com/Motherboards/Z170-DELUXE/specifications/
       
      Catalina 10.15.4 - Windows 10
      What is working:
      BCM94360HMB Wifi and Bluetooth AirDrop, Handoff, FaceTime, Messages, App Store, iCloud, etc. Intel HD 530 (QE/CI tested, but now I'm using it in headless) Sleep RX 5700 (QE/CI with 2 1080p monitors connected) Sound USB Ports Two Ethernet ports macOS with a light OC (4.12 GHz - 4.5 Ghz, XMP, ASUS optimal) No problem so far ASUS HyperKit with a KINGSTON NVMe SSD - 250 GB  
      What is not working:
      -  
       
      Not tested:
      VideoProc says that Hardware Decoding\Encoding is fully supported and enabled on both HD 530 and RX 5700 but I didn't test it Thunderbolt (no equipment)  
      Issues:
      None  
      BIOS Settings:
      Boot\CSM (Compatibility Support Module): Launch CSM: Disabled Boot\Secure Boot: OS type: Other OS Secure Boot State: Disabled Advanced\System agent (sa) Configuration: VT-d: Enabled Graphics Configuration: Primary Display: Auto iGPU Multi-monitor: Enabled RC6(Render Standby): Enabled DVMT Pre-Allocated: 128M Advanced\PCH Storage Configuration: SATA Mode Selection: AHCI HyperKit: Enable (if you have NVMe SSD with ASUS HyperKit) Advanced\CPU Configuration: Intel Virtualization Technology: Enabled CPU- Power Management Control: Intel SpeedStep: Enabled CPU- C-States: Enabled Intel SpeedShift: Enabled  
      Getting ready for installation:
      Download the bootpack (Clover v5107): Click here -> asus-z170_clover_5107.zip  
      Installation:
      Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager) Copy my Clover folder to the USB's EFI folder Boot with the Installer USB If you have any problem (kp or freeze) boot with config_debug.plist to see what causes the issue  
      Post Installation:
      Download Clover Configurator and generate a new Serial Number for yourself  
      Some pictures:
       

       




       
       
       
      Catalina & Windows 10 Dual-Boot (clean install, on one drive):
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac)
       Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart
      Boot into your Win installer, Format the partition you created for Win, install. 
      Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: 
      bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi  
      You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)  
      Mounting EFI from Windows:
      Open cmd in administrator mode and type: mountvol b: /s (This will mount your EFI) Open Total Commander or Explorer++ in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI)  
      Notes:
       
      2020.03.26: Updated to 10.15.4 -> Updated WhateverGreen, Lilu -> Updated Clover to v5107
      2020.03.23: Removed "EmuVariableUefi.efi" -> deleted, caused false nvram map, now it's native, updated Clover to v5106
      2020.02.11: Updated to 10.15.3 -> No problem when/after installing
      2020.01.19: Added ASUS HyperKit NVMe SSD to the "What is working" list
      2020.01.12: Tested system with OC, added more informations to BIOS settings
      2020.01.11: Added SmallTreeIntel82576.kext for 2nd Ethernet, Tested Ethernet ports
      2020.01.11: First upload
       
    • By TimothyF
      My PROBLEM: I followed the Plain Vanilla guide (https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/) to a T in creating the OS X Catalina installer USB. I'm totally new to Hackintosh, and just want an Apple environment to Time Machine migrate my files and system from my ageing MacBook Pro. When I start to use the USB on the target PC (Dell Inspiron 3847 desktop), I ONLY see the Microsoft (which is the original OS, and on a SEPARATE Hard drive from where I want to install Mac OS), ZERO option for installing the OSX Catalina! Please SEE PICTURE link: https://imgur.com/a/FnLB2Q9   I'm a beginner, but I tried to google my problem. The answers were either incomplete, hard for me to understand and put into action, or were outdated and applied to older OSXs. I appreciate any help in diagnosing and solving this problem!   Clover USB specs OS installer used: Catalina (10.15) Clover revision: 5103 Kexts included: ATH9KFixup.kext AppleALC.kext Lilu.kext RealtekRTL8111.kext USBInjectAll.kext VirtualSMC.kext WhateverGreen.kext config.plist: see attached ------------------------------------------ Target Desktop specs: Dell Inspiron 3847 (64 bit) CPU: Intel Core i5-4460, 3.2 GHz, 4 cores Architecture: Haswell GPU: Intel HD 4600 Motherboard: Dell 088DT1 (version A01) Chipset: Intel H81 Install method: with USB, configured with Clover, 100% following Plain Vanilla guide for Desktops RAM: 12 GB, 2 slots Hard drive for installation: SATA HDD 4TB, by HGST LAN: RTL8111/8168/8411 WLAN: AR9565 (atheros) Audio: Realtek ALC661 (not 100% sure this is correct)   ------------------------------------ Attached:
      Screenshot of Clover installer not showing the Mac OSX option
      config.plist of my installer USB
      Clover_Install_Log.txt (not sure if this is relevant)   THANK YOU VERY MUCH!     config.plist
      Clover_Install_Log.txt
    • By Simon's InsaneMac
      Hi, I'm kind of lost when scrolling to Clover Configurator, so I decided to use an EFI from the web and just configure the most basic stuff. But that sadly didn't work, im always getting the attached screen IMG_0054.HEIC (and I don't know whether all the errors are listed, as I can't scroll). 
      Anyways I thought it'd be better to do a custom setup. Can anyone give me some help with what to choose in the settings? Here's my rig:
      i7 8700k
      Asus z370-G (Rog Strix)
      gtx 1060 6gb
      samsung ssd (SATA)
      WD hard drive
       
      Your help would be much appreciated!
×