Jump to content
InsanelyMac Forum
MaLd0n

[Guide] Sierra / High Sierra on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

Recommended Posts

Advertisement
55 minutes ago, Babiloe said:

Sent me files

http://www40.zippyshare.com/v/LCJKwAAF/file.html

 

Optimus type MX150 Nvidia and UHD 620 5917 not 5916...

So I think I can run 620 intel only as rehab man told. dO I need change dsdt or IGPu dsl to 5917 instead of 5916? 

http://www83.zippyshare.com/v/rjEL3O5F/file.html

VoodooI2CELAN.kext.zip

what ur audio codec?

41 minutes ago, petr said:

installation finally started but after HDD SETUP AND MAC HIGH SIERRA INSTALLATION ON, it will write recovery server could not be contacte .... 

Check procedure, is a two stages installation

22 minutes ago, YoYelloW said:

Tried all teh combinations from there, no luck :s you got any idea what to do next?

no ideaBluetoothDevBroadcomInjector.kext.zip

Share this post


Link to post
Share on other sites
Posted (edited)
45 minutes ago, MaLd0n said:

Voodooi2CELAN.kext is the core  kext for /S/L/E ?

Keyboard and Keypad dead now...luckily I have bluetooth key and mouse

here the symptoms

	log show --predicate 'process == "kernel"' --start "2018-03-23 00:15:00" > voodooi2clog.txt
	 
018-03-23 00:25:31.344338+0700 0x549      Default     0x0                  0      0    kernel: (kernel) VoodooGPIOSunrisePointLP::Loading GPIO Data for SunrisePoint-LP
2018-03-23 00:25:31.344455+0700 0x549      Default     0x0                  0      0    kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Init!
2018-03-23 00:25:31.344459+0700 0x549      Default     0x0                  0      0    kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Initializing Community 0
2018-03-23 00:25:31.344503+0700 0x549      Default     0x0                  0      0    kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Initializing Community 1
2018-03-23 00:25:31.344534+0700 0x549      Default     0x0                  0      0    kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Initializing Community 2
2018-03-23 00:25:31.344646+0700 0x130      Default     0x0                  0      0    kernel: (kernel) VoodooGPIOSunrisePointLP::GPIO Controller is already awake! Not reinitializing.
2018-03-23 00:25:31.346286+0700 0x553      Default     0x0                  0      0    kernel: (AppleHDAController) Sound assertion in AppleHDAController at line 436
2018-03-23 00:25:31.346291+0700 0x553      Default     0x0                  0      0    kernel: (AppleHDAController) Sound assertion in AppleHDAController at line 385
2018-03-23 00:25:31.347913+0700 0x543      Default     0x0                  0      0    kernel: (IOBluetoothHostControllerUSBTransport) **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x3800 ****
2018-03-23 00:25:31.353306+0700 0x536      Default     0x0                  0      0    kernel: (kernel) VoodooI2CPCIController::pci8086,9d61 Starting I2C controller
2018-03-23 00:25:31.353345+0700 0x536      Default     0x0                  0      0    kernel: (kernel) VoodooI2CPCIController::pci8086,9d61 Set PCI power state D0
2018-03-23 00:25:31.353361+0700 0x534      Default     0x0                  0      0    kernel: (AppleOnboardSerial) Identified Serial Port UA00 at 0x7f9102d000(<private>)
2018-03-23 00:25:31.353380+0700 0x536      Default     0x0                  0      0    kernel: (kernel) VoodooI2CPCIController::pci8086,9d61 Publishing nub
2018-03-23 00:25:31.354978+0700 0x542      Default     0x0                  0      0    kernel: com_apple_driver_eficheck::probe(LPCB)
2018-03-23 00:25:31.355141+0700 0x542      Default     0x0                  0      0    kernel: (kernel) SuperIODevice: [Fatal] found unsupported chip! ITE sequence ID=0xffff, Winbond sequence ID=0xffff
2018-03-23 00:25:31.355156+0700 0x542      Default     0x0                  0      0    kernel: com_apple_driver_eficheck::start(LPCB) <1>
2018-03-23 00:25:31.356854+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Probing controller
2018-03-23 00:25:31.356870+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Found valid Synopsys component, continuing with initialisation
2018-03-23 00:25:31.357102+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerNub::pci8086,9d61 SSCN not implemented in ACPI tables
2018-03-23 00:25:31.357113+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerNub::pci8086,9d61 FMCN not implemented in ACPI tables
2018-03-23 00:25:31.357118+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Warning: Error getting bus config, using defaults where necessary
2018-03-23 00:25:31.357133+0700 0x562      Default     0x0                  0      0    kernel: IOSerialBSDClient: not registry member at registerService()
2018-03-23 00:25:31.359014+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Publishing device nubs
2018-03-23 00:25:31.359017+0700 0x532      Default     0x0                  0      0    kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Starting I2C controller
2018-03-23 00:25:31.359026+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Found I2C device: ELAN1300
2018-03-23 00:25:31.359080+0700 0x532      Default     0x0                  0      0    kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Set PCI power state D0
2018-03-23 00:25:31.359119+0700 0x532      Default     0x0                  0      0    kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Publishing nub
2018-03-23 00:25:31.363895+0700 0x56d      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Probing controller
2018-03-23 00:25:31.363907+0700 0x56d      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Found valid Synopsys component, continuing with initialisation
2018-03-23 00:25:31.364027+0700 0x56d      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerNub::pci8086,9d60 SSCN not implemented in ACPI tables
2018-03-23 00:25:31.364039+0700 0x56d      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerNub::pci8086,9d60 FMCN not implemented in ACPI tables
2018-03-23 00:25:31.364044+0700 0x56d      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Warning: Error getting bus config, using defaults where necessary
2018-03-23 00:25:31.364070+0700 0x56d      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Publishing device nubs

Error getting bus config I think....I uploaded the log...

Because I removed AppleHPM.kext and AppleIntelLpssi2c.kext and AppleIntelLpssi2controller.kext from /S/L/E? trying put back there on...

HDaudio As windows said. conexant but what cx series I don't know...

Conexxant Smart Audio HDHDAUDIO\FUNC_01&VEN_14F1&DEV_1F72&SUBSYS_10431C50&REV_1000

voodooi2clog.txt

Edited by Babiloe

Share this post


Link to post
Share on other sites
24 minutes ago, Babiloe said:

Voodooi2CELAN.kext is the core  kext for /S/L/E ?

As windows said. conexant but what cx series I don't know...


Conexxant Smart Audio HDHDAUDIO\FUNC_01&VEN_14F1&DEV_1F72&SUBSYS_10431C50&REV_1000

try in clover/kexts/other, if dont work, put in l/e or s/l/e

Share this post


Link to post
Share on other sites
5 minutes ago, MaLd0n said:

try in clover/kexts/other, if dont work, put in l/e or s/l/e

it is already on /S/L/E.

BTW, you have also Voodooi2c,kext on clover/kexts/other on clover zippyshare 

 

Share this post


Link to post
Share on other sites
4 minutes ago, Babiloe said:

it is already on /S/L/E.

BTW, you have also Voodooi2c,kext on clover/kexts/other on clover zippyshare 

 

yes, 3 kext voodooL2C pack + DSDT patches

Share this post


Link to post
Share on other sites
58 minutes ago, MaLd0n said:

yes, 3 kext voodooL2C pack + DSDT patches

Looks like I need to go back to my patched DSDT.aml in clover. somehow I can't get the i2c touchpad go. fn key not functional.

Definitely need VoodooPS2controller.kext to get back keyboard.

Need sleep now. Thank you.

 

Share this post


Link to post
Share on other sites
8 minutes ago, Babiloe said:

Looks like I need to go back to my patched DSDT.aml in clover. somehow I can't get the i2c touchpad go. fn key not functional.

Definitely need VoodooPS2controller.kext to get back keyboard.

Need sleep now. Thank you.

 

don't need, just tell me what not work and we add in new patched DSDT

send me files with my app

RunMe.app.zip

Share this post


Link to post
Share on other sites
1 hour ago, MaLd0n said:

don't need, just tell me what not work and we add in new patched DSDT

send me files with my app

RunMe.app.zip

Fn not working,so including brightness and keyboard light, not test wake / lid yet

battery ok

elan touchpad not work, now I am using 1.0.4 elan 1300 driver on S L E

sound I use voodoohda, applealc not worked. but still on clover by the time this run me app

 

http://www51.zippyshare.com/v/VymsqaYn/file.html

 

Share this post


Link to post
Share on other sites
1 hour ago, Babiloe said:

Fn not working,so including brightness and keyboard light, not test wake / lid yet

battery ok

elan touchpad not work, now I am using 1.0.4 elan 1300 driver on S L E

sound I use voodoohda, applealc not worked. but still on clover by the time this run me app

 

http://www51.zippyshare.com/v/VymsqaYn/file.html

 

try it instead voodoops2controller

Babiloe.zip

u debug keys for brughtness key? if yes, tell me what _Qxx

BTW, u can use only DSDT + SSDT PNLF ;)

8 minutes ago, Thomas126 said:

Holy you really are the best. Thanks a lot mate. Is that Beer link still up to date?

Hey, Thomas!

Yes, is up to date. xD

Share this post


Link to post
Share on other sites
9 minutes ago, MaLd0n said:

try it instead voodoops2controller

Babiloe.zip

u debug keys for brughtness key? if yes, tell me what _Qxx

BTW, u can use only DSDT + SSDT PNLF ;)

Hey, Thomas!

Yes, is up to date. xD

How come the latest webdirvers are working so bad?

Share this post


Link to post
Share on other sites
4 hours ago, Thomas126 said:

How come the latest webdirvers are working so bad?

is very strange, after 10.13.3, web drivers die lol

 

Share this post


Link to post
Share on other sites

MaLd0n

Thank you very much OSX :-) Can I switch Intel HD 530 to GeForce GTX 950A 4GB? Intel 530 is fully functional with a resolution of 1920x1024 but I can not switch to 4K :-(

 

Share this post


Link to post
Share on other sites
Posted (edited)
On 3/21/2018 at 7:22 PM, MaLd0n said:

8700K

Ok so monday I get these parts:

ASUS PRIME H270-PRO

i3-7100

NVidia GT 1030

I downloaded the folder at post n. 1

Just create USB key and then drop Clover into EFI?

Thanks a lot!

Edited by zzmadd

Share this post


Link to post
Share on other sites

Hi masters of the hack universe¡¡

I need to resolve certain issues with usb volumes that always mounted, if I unmount then return to be mounted.

The low speed I get with the m2 ssd. 150mb as you can see en speedtest.

Another question for ask is the temperature the is rendering, 80º is normal? I use normal cooler like NOX Hummer 212. I see systems that has this and work better.

 

for secondary improvements a question about if is better for performance add the Igpu to my setup. i work with only Nvidia gpu, and for example bruce test takes 43 sec.

I read similar configs like me and betters times.

Mobo Asus Z170-A Bios version 2202

CPU I7 6700 4GHZ

GPU Nvidia GTX 980 4gb

RAM 16GB CRUCIAL DDR4 2133

hd1 system boot. crucial m2 CT275MX300SSD4

HD2 MEDIA STORAGE. CRUCIAL CT500MX500SSD1

I included my bios settings and the send.app files.

https://drive.google.com/open?id=1FEx_EHc_ohavRnzGPYbW4FqIgeoJtpCl

thank you for your support and knowledge.

 

 

180323163834.jpg

180323164407.jpg

180323164351.jpg

180323164334.jpg

180323164324.jpg

180323164312.jpg

180323164204.jpg

180323164150.jpg

180323164124.jpg

180323164057.jpg

180323164042.jpg

180323163955.jpg

180323163941.jpg

180323163934.jpg

180323163918.jpg

m2 crucial.jpg

ssd crucial.jpg

CINEBENCH.jpg

GEEKBENCH.jpg

Share this post


Link to post
Share on other sites
5 hours ago, petr said:

MaLd0n

Thank you very much OSX :-) Can I switch Intel HD 530 to GeForce GTX 950A 4GB? Intel 530 is fully functional with a resolution of 1920x1024 but I can not switch to 4K :-(

 

Optimus? No u need use IntelHD

https://github.com/PMheart/CoreDisplayFixup

3 hours ago, zzmadd said:

Ok so monday I get these parts:

ASUS PRIME H270-PRO

i3-7100

NVidia GT 1030

I downloaded the folder at post n. 1

Just create USB key and then drop Clover into EFI?

Thanks a lot!

Yes, install clover and replace folder in usb stick

Share this post


Link to post
Share on other sites
22 minutes ago, Fr0d0 said:

Hi masters of the hack universe¡¡

I need to resolve certain issues with usb volumes that always mounted, if I unmount then return to be mounted.

The low speed I get with the m2 ssd. 150mb as you can see en speedtest.

Another question for ask is the temperature the is rendering, 80º is normal? I use normal cooler like NOX Hummer 212. I see systems that has this and work better.

 

for secondary improvements a question about if is better for performance add the Igpu to my setup. i work with only Nvidia gpu, and for example bruce test takes 43 sec.

I read similar configs like me and betters times.

Mobo Asus Z170-A Bios version 2202

CPU I7 6700 4GHZ

GPU Nvidia GTX 980 4gb

RAM 16GB CRUCIAL DDR4 2133

hd1 system boot. crucial m2 CT275MX300SSD4

HD2 MEDIA STORAGE. CRUCIAL CT500MX500SSD1

I included my bios settings and the send.app files.

https://drive.google.com/open?id=1FEx_EHc_ohavRnzGPYbW4FqIgeoJtpCl

thank you for your support and knowledge.

 

 

180323163834.jpg

180323164407.jpg

180323164351.jpg

180323164334.jpg

180323164324.jpg

180323164312.jpg

180323164204.jpg

180323164150.jpg

180323164124.jpg

180323164057.jpg

180323164042.jpg

180323163955.jpg

180323163941.jpg

180323163934.jpg

180323163918.jpg

m2 crucial.jpg

ssd crucial.jpg

CINEBENCH.jpg

GEEKBENCH.jpg

replace, reboot, new dump

http://www117.zippyshare.com/v/fliDeMhE/file.html
 

Share this post


Link to post
Share on other sites
Posted (edited)
On 3/23/2018 at 5:25 AM, MaLd0n said:

try it instead voodoops2controller

Babiloe.zip

u debug keys for brughtness key? if yes, tell me what _Qxx

BTW, u can use only DSDT + SSDT PNLF ;)

Hey, Thomas!

Yes, is up to date. xD

keyboard and elan still can't work, but sound works via appleALC, no need voodoohda, battery works updating...

keyboard dead  without voodoops2controller..

 

uploading the runme result...

http://www68.zippyshare.com/v/vzmRWBgt/file.htmlI will try with voodoops2 instead for testing fn keys

 

I dont know what Qx.. I just use this patch on maciasl, how to find out?

Fn Brightness Keys Patch.txt

FnKeys as Function Keys Patch.txt

KeyboardBacklight Patch 4.txt

ZenBooks LidSleep and ScreenBackLight Patch.txt

 

 

I have tried modded gpio pin for elan 1300 kext that perfect run under my dsdt using voodooi2c.kext and voodooi2chid.kext. Strange it not succeed on your dsdt.

	    Scope (_SB.PCI0.I2C1)
    {
        Device (ETPD)
        {
            Name (SBFG, ResourceTemplate ()
            {
                GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000,
                    "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer, ,
                    )
                    {   // Pin list
                        0x0055
                    }
            })
            Name (_ADR, One)  // _ADR: Address
            Name (ETPH, Package (0x16)
            {
                "ELAN1200", 
                "ELAN1201", 
                "ELAN1203", 
                "ELAN1200", 
                "ELAN1201", 
                "ELAN1300", 
                "ELAN1301", 
                "ELAN1300", 
                "ELAN1301", 
                "ELAN1000", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1203", 
                "ELAN1203", 
                "ELAN1201", 
                "ELAN1300", 
                "ELAN1300", 
                "ELAN1200", 
                "ELAN1300"
            })
            Name (FTPH, Package (0x05)
            {
                "FTE1001", 
                "FTE1200", 
                "FTE1200", 
                "FTE1300", 
                "FTE1300"
            })
            Method (_HID, 0, NotSerialized)  // _HID: Hardware ID
            {
                If (And (TPDI, 0x04))
                {
                    Return (DerefOf (Index (ETPH, TPHI)))
                }
	                If (And (TPDI, 0x10))
                {
                    Return (DerefOf (Index (FTPH, TPHI)))
                }
	                Return ("ELAN1010")
            }
	            Name (_CID, "PNP0C50")  // _CID: Compatible ID
            Name (_UID, One)  // _UID: Unique ID
            Name (_S0W, 0x03)  // _S0W: S0 Device Wake State
            Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
            {
                If (LEqual (Arg0, ToUUID ("3cdff6f7-4267-4555-ad05-b30a3d8938de") /* HID I2C Device */))
                {
                    If (LEqual (Arg2, Zero))
                    {
                        If (LEqual (Arg1, One))
                        {
                            Return (Buffer (One)
                            {
                                 0x03                                           
                            })
                        }
                        Else
                        {
                            Return (Buffer (One)
                            {
                                 0x00                                           
                            })
                        }
                    }
	                    If (LEqual (Arg2, One))
                    {
                        Return (One)
                    }
                }
                Else
                {
                    Return (Buffer (One)
                    {
                         0x00                                           
                    })
                }
            }
	            Method (_STA, 0, NotSerialized)  // _STA: Status
            {
                If (LOr (LNotEqual (TPIF, One), LAnd (DSYN, One)))
                {
                    Return (Zero)
                }
	                Return (0x0F)
            }
	            Method (_CRS, 0, Serialized)  // _CRS: Current Resource Settings
            {
                Name (SBFB, ResourceTemplate ()
                {
                    I2cSerialBusV2 (0x0015, ControllerInitiated, 0x00061A80,
                        AddressingMode7Bit, "\\_SB.PCI0.I2C1",
                        0x00, ResourceConsumer, , Exclusive,
                        )
                })
                Return (ConcatenateResTemplate (SBFB, SBFG))
            }
        }
    }
	

 

 

EDIT: keyboard WITH VOODOOPS2Controller.kext, appleps2touch kext removed...

a. Fn keys works

b. Backlight LCD works

c. Battery works

d. Audio works

e. Lid works/ when I closed it black..., lcd off, good..

f. when I put fn+f1 it to sleep... but when I click power, screen just black.., that key for hibernate or sleep, mackintosh can't hibernate right?

g. fn keyboard light not working.

h. elan 1300 still not working

 

I have edit your DSDT.aml with KeyboardBacklit Patch 4.txt below and now the Keyboard light works.

Please help me with the ELAN 1300.

 

DSDT.aml

Edited by Babiloe

Share this post


Link to post
Share on other sites

Hello All,

Does anyone have a Custom SSDT for USBInjectAll.kext for a Gigabyte Z370 Gaming 7 MB they can share? I'm having challenges with my Corsair Link waking my rig up from sleep within 2-3 seconds after it "goes under".

Thanks!
Lam

Share this post


Link to post
Share on other sites
13 hours ago, Babiloe said:

keyboard and elan still can't work, but sound works via appleALC, no need voodoohda, battery works updating...

keyboard dead  without voodoops2controller..

 

uploading the runme result...

http://www68.zippyshare.com/v/vzmRWBgt/file.htmlI will try with voodoops2 instead for testing fn keys

 

I dont know what Qx.. I just use this patch on maciasl, how to find out?

Fn Brightness Keys Patch.txt

FnKeys as Function Keys Patch.txt

KeyboardBacklight Patch 4.txt

ZenBooks LidSleep and ScreenBackLight Patch.txt

 

 

I have tried modded gpio pin for elan 1300 kext that perfect run under my dsdt using voodooi2c.kext and voodooi2chid.kext. Strange it not succeed on your dsdt.

 


	    Scope (_SB.PCI0.I2C1)
    {
        Device (ETPD)
        {
            Name (SBFG, ResourceTemplate ()
            {
                GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000,
                    "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer, ,
                    )
                    {   // Pin list
                        0x0055
                    }
            })
            Name (_ADR, One)  // _ADR: Address
            Name (ETPH, Package (0x16)
            {
                "ELAN1200", 
                "ELAN1201", 
                "ELAN1203", 
                "ELAN1200", 
                "ELAN1201", 
                "ELAN1300", 
                "ELAN1301", 
                "ELAN1300", 
                "ELAN1301", 
                "ELAN1000", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1203", 
                "ELAN1203", 
                "ELAN1201", 
                "ELAN1300", 
                "ELAN1300", 
                "ELAN1200", 
                "ELAN1300"
            })
            Name (FTPH, Package (0x05)
            {
                "FTE1001", 
                "FTE1200", 
                "FTE1200", 
                "FTE1300", 
                "FTE1300"
            })
            Method (_HID, 0, NotSerialized)  // _HID: Hardware ID
            {
                If (And (TPDI, 0x04))
                {
                    Return (DerefOf (Index (ETPH, TPHI)))
                }
	                If (And (TPDI, 0x10))
                {
                    Return (DerefOf (Index (FTPH, TPHI)))
                }
	                Return ("ELAN1010")
            }
	            Name (_CID, "PNP0C50")  // _CID: Compatible ID
            Name (_UID, One)  // _UID: Unique ID
            Name (_S0W, 0x03)  // _S0W: S0 Device Wake State
            Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
            {
                If (LEqual (Arg0, ToUUID ("3cdff6f7-4267-4555-ad05-b30a3d8938de") /* HID I2C Device */))
                {
                    If (LEqual (Arg2, Zero))
                    {
                        If (LEqual (Arg1, One))
                        {
                            Return (Buffer (One)
                            {
                                 0x03                                           
                            })
                        }
                        Else
                        {
                            Return (Buffer (One)
                            {
                                 0x00                                           
                            })
                        }
                    }
	                    If (LEqual (Arg2, One))
                    {
                        Return (One)
                    }
                }
                Else
                {
                    Return (Buffer (One)
                    {
                         0x00                                           
                    })
                }
            }
	            Method (_STA, 0, NotSerialized)  // _STA: Status
            {
                If (LOr (LNotEqual (TPIF, One), LAnd (DSYN, One)))
                {
                    Return (Zero)
                }
	                Return (0x0F)
            }
	            Method (_CRS, 0, Serialized)  // _CRS: Current Resource Settings
            {
                Name (SBFB, ResourceTemplate ()
                {
                    I2cSerialBusV2 (0x0015, ControllerInitiated, 0x00061A80,
                        AddressingMode7Bit, "\\_SB.PCI0.I2C1",
                        0x00, ResourceConsumer, , Exclusive,
                        )
                })
                Return (ConcatenateResTemplate (SBFB, SBFG))
            }
        }
    }
	

 

 

 

EDIT: keyboard WITH VOODOOPS2Controller.kext, appleps2touch kext removed...

a. Fn keys works

b. Backlight LCD works

c. Battery works

d. Audio works

e. Lid works/ when I closed it black..., lcd off, good..

f. when I put fn+f1 it to sleep... but when I click power, screen just black.., that key for hibernate or sleep, mackintosh can't hibernate right?

g. fn keyboard light not working.

h. elan 1300 still not working

 

I have edit your DSDT.aml with KeyboardBacklit Patch 4.txt below and now the Keyboard light works.

Please help me with the ELAN 1300.

 

DSDT.aml

ohhhh

checkMaLd0n 2018-03-24 às 13.02.14.png

missing 0x00150000 and 0x00150001, the patch from repo remove devices

where u found this patch? i think the repo L2C is not update

7 hours ago, lambusser said:

Hello All,

Does anyone have a Custom SSDT for USBInjectAll.kext for a Gigabyte Z370 Gaming 7 MB they can share? I'm having challenges with my Corsair Link waking my rig up from sleep within 2-3 seconds after it "goes under".

Thanks!
Lam

just edit UsbInjectAll and use flag uia_exclude=XXXX

EXAMPLE

Unused Ports, uxcluded with flag
uia_exclude=HS01;HS02;HS03;HS04;HS05;HS06;HS10;HS11;SSP1;SSP2;SSP6
 
Used Ports
HS07, HS08, HS09, HS12, HS13, HS14, SSP3, SSP4, SSP5

2 hours ago, alex9440 said:

Hi MaLd0n! What does it mean? Graphics I have completely got started or not?5ab65806b22a9_2018-03-2416_50_10.png.0d80b0a62b7e576363677d61c4da27f1.png

MaLd0n 2018-03-24 às 13.08.18.pngi have it and full work

MaLd0n 2018-03-24 às 13.09.02.png

Share this post


Link to post
Share on other sites
16 minutes ago, MaLd0n said:

Оооо

проверитьMaLd0n 24.03.2018 в 13.02.14.png

отсутствует 0x00150000 и 0x00150001, патч от устройств удалить репо

где и нашел этот патч? я думаю, что L2C репо не обновляется

просто редактировать UsbInjectAll и использовать uia_exclude флаг = XXXX

ПРИМЕР

Неиспользуемые порты, uxcluded с флагом
uia_exclude = HS01; HS02; HS03; HS04; HS05; HS06; HS10; HS11; SSP1; SSP2; SSP6
 
используемые порты
HS07, HS08, HS09, HS12, HS13, HS14, SSP3, SSP4, SSP5

MaLd0n 24.03.2018 в 13.08.18.pngУ меня есть это и полная работа

MaLd0n 24.03.2018 в 13.09.02.png

just do not understand what it means: GVA info: Successfully connected to the Intel plugin, offline Gen95

Снимок экрана 2018-03-24 в 19.22.34.png

Share this post


Link to post
Share on other sites
Posted (edited)
On 3/20/2018 at 3:37 PM, MaLd0n said:

CLOVER.zip

RX 580 now, nvidia provide a bad driver, i changed ;)

 

Looks great, thanks!

One more.. Is it OK that there is not the IMEI Controller driver?5ab714af73063_2018-03-2506_16_02.thumb.png.499b045189bce6b68b96ffc9bceba8d7.png

And another one. I have a wireless keybord with "FN"key and multimedia keys under F1-12 keys with "FN"pressing. How can I enable that option like on original Mac?

5ab7153d4fb00_2018-03-2506_16_13.png.fec57c79c8622c83431dfb7a85ea5659.png

New "Send me"zip https://drive.google.com/file/d/1pf8vr4x0KNn2-yHGHMWLcBM8agH-Z0em/view?usp=sharing

Edited by iSoul01

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.



  • Similar Content

    • By Gymnae
      Introduction
      The H370 chipset powers 8th generation Intel Core-i CPUs. Even though the name H370 rings comparable to Z370, the H370 is based on newer silicon. This it also requires some new approaches compared to the Z370. An example would be on-die USB 3.1 and WiFi support.
       
      Since this guide is not a "hold-your-hand-every-step" guide, I assume you know:
      Clover installation and configuration How to create an install medium for MacOS Access and configure the BIOS Have heard of ACPI patching (I'm a newb at this myself)  
      What works
      Sleep (via DSDT edits and emulated NVRAM) On-board Audio (via CloverALC script) Native power management (without any kext or patch) All USB ports (and only those present are active) iGPU for both acceleration and display dGPU (I'm running an Nvidia GTX 1080)  
      Untested
      NIC --> I'm using WiFi only  
      What doesn't work
      Native NVRAM via AptioMemoryFix.efi DMVT Pre-alloc higher than 64MB (but not necessary)  
      Changes to the guide:
      22.5.18: Added SSDT hot-patching to enable sleep, replacing DSDT static patching as an alternative.
      23.5.18: Add iMac18,1 as alternative SMBIOS config for those relying on the iGPU for output
       
      1. Installation
      This guide heavy inspired by the work of /u/corpnewt of /r/hackintosh and his (sorta) Vanilla guide
       
      1.1 Create the install media for MacOS
      Follow this, if you are using a Mac to start off with. If you are totally new to MacOS, then please check the basic guide Creation of an installer media in windows or linux
       
      1.2 Install Clover on the install media
      Using the Clover installer, ensure you are installing to the USB medium you are using for the installer.
      Chose the following options:
      AptioMemoryFix UEFI booting only Install to ESP You have to get your hands on an apfs.efi. A google search can help, or extracting it from the Installer package. Make sure you procure a version matching the MacOS version you are about to install. Place the apfs.efi in drivers64UEFI.
       
      1.2 Adjust the config.plist for the installer
      You can use the config.plist attached as a guideline, but take a look at it before and at least adjust the SMBIOS - otherwise it won't boot.
      Attention: The attached plist contains audio patches introduced by a post-install step. If you run into problems, you might remove those. It also contains a manual slide value, which should normally not be needed, but works fine for me. It is also tuned for usage with an Nvidia Pascal dGPU as main GPU.
       
      The config you create now should serve you nicely for install and running the system.
       
      Take care of adding the following basics:
      SMBIOS: iMac18,3 - You can generate a serial number via Clover Configurator. The creation of a proper SMBIOS is covered in many guides to good extend Note: If you aim at using the iGPU for output, a user reported that iMac18,1 works better - since iMac18,3 produces sever flicker. Look at the graphics section and adjust the injection for Intel to your situation  
      Fixes

      Patches

      Devices

      Graphics

      Kernel and Kext patches
       
      1.3 kexts and friends
      Add the supplied SSDT-UAIC.aml to "patched" - it limits the injected USB Ports to the actual number and ports valid for this board.
       
      Required kexts on "Other":
      FakeSMC.kext IntelGraphicsFixup.kext Lilu.kext When having an Nvidia card: NvidiaGraphicsFixup.kext IntelMausiEthernet.kext in case you're running Ethernet USBInjectAll.kext with the HCI-300-series-injector.kext --> These two should be installed to /L/E after install  
      We are leaving sound out at the moment, this is something for post-install. Please note the absence of Shiki, I don't find it necessary. Video material I tried made use of the iGPU without shiki.
       
      1.4 Check BIOS and install
      You should be ready for install. But before you reboot, please take a look at your BIOS and set it up accordingly (copied from the aforementioned guide and adapted):
      Load Optimized Defaults Disable VT-d setting If your system has Secure Boot Mode, disable it Set OS Type to Windows 8/10 or OtherOS - I have not seen a difference Turn off internal Serial and Parallel port Turn off Network stack for boot Turn off wake-on-lan (for now) Set XHCI Handoff to Enabled Don't enable decode over 4G Depending on your GPU, set priority for boot Set internal GPU to enable Set DMVT pre-alloc to 64MB Set USB legacy to enabled Activate XMP profile 1 f your Ram has it (mine doesn't and I added the timings manually) Set ERP to enable, disable platform power management (I need to do more research if this could be enabled)  
      I've attached my current BIOS config "hack2". You can place that on a fat32 drive (the EFI partition of your install USB drive might be an idea) and see if it loads. It's made for and with the F2 BIOS.
       
      The install itself should be like other MacOS Hackintosh installs with it several reboots and ensuring to select the correct boot device in Clover.
       
      2. Post-install
       
      2.1 Install clover on target
      This is a no-brainer, but install a fresh copy of Clover on your target medium.
       
      During install select again AptioMemoryFix but also additionally
      EmuVariableUefi-64.efi Install RC scripts on target volume because otherwise NVRAM doesn't seem to work
       
      After the install, copy
      config.plist contents of "Other" content of "patched" apfs.efi from drivers64UEFI to your new clover install.
       
      2.1 Edit ACPI for slumber
      Choose one option, not both. The hot-patch is experimental, but for the moment it is stable.
       
      2.1.1 Edit DSDT
      This is necessary only once on initial install and every time, you edit or upgrade the BIOS. The DSDT.aml attached to this post might work for your system or give you a file to compare to. Don't expect it to work for you, though.
      I won't go into the details of DSDT extraction and patching. There are better guides (the linked guide is a rip-off of rehabman's guide from a different forum). Please follow such a guide to extract your ACPI data.
       
      Locate and disassemble the DSDT with the newest iasl binary you can put your hands on, then open it with MacIASL in its newest version you can find (Hint: Here is a good source) You can check if the version is new enough if MacIASL doesn't throw error upon compiling a freshly extracted DSDT.aml or DSDT.dst
       
      Add rehabmans repo (as per linked guide) and apply the following patches:
      Rename _DSM to _XDSM Fix _WAK Arg0 v2 USB3 _PRW 0x6D Skylake (instant wake) Find the CNVW device and remove the _PWR function there.
       
      Compile the DSDT and place it in "patched".
       
      2.1.2 Use SSDT hot-patching
      Instead of having to re-extract and re-patch the DSDT on every BIOS change or update, Hardware change one can also use ACPI hot-patching.
      It's a combination of config.plist patches and an SSDT, which is hot-patched into the ACPI (if I understand the process correctly)
       
      You need to add this SSDT-GPRW.aml to your Clover folder in the designated position at Clover/ACPI/patched You need to add this patch to your config.plist. It goes into the DSDT patch section  
      Note: This works for me, but the patch removes the _PRW method from all devices in the DSDT. This could have side-effects. So far, I have seen none. At the moment I'm also not applying any other patch, compared with the additional edits I made to the DSDT method before.
       
      2.2 Install kexts to system
      As mentioned in the install section, it's better to follow rehabman's instruction and install USBinjectAll.kext to /L/E:
      sudo cp -R Release/USBInjectAll.kext /Library/Extensions sudo touch /System/Library/Extensions && sudo kextcache -u / 2.3 Enable onboard Audio
      This is where I'm not so happy currently, I'd like it to work without altering AppleHDA. But currently I find no other way.
       
      2.3.1 Install FakePCIID & FakePCIID_Intel_HDMI_Audio
      Rehabman tells us to use a kext installer to install it to /S/L/E. Chose the RELEASE folder
       
      2.3.2 Run CloverALC command
      Ensure your EFI partition is mounted before running this command
      Get the newest version of CloverALC command (audio_cloverALC-xxx.sh) and run it. Our Audio codec is RTL887 and I'm running with layout ID 1
       
      2.4 Optional steps
      If you have a dGPU, now it's the time to install its drivers and adjust the config.plist for it.
      This is out of scope of this guide. Yet, my supplied config.plist is ready to be used with Nvidia Pascal cards and using the Nvidia web driver.
       
      3. ToDo
      Move away from static DSDT patching to SSDT hotpatching --> requires my work Native NVRAM --> requires developer work Audio without AppleHDA patching --> requires developer work  
      4. Thanks to
      @MaLd0nfor helping finding the right way with the DSDT
      @RehabMan, for being a legend and helping me out patching
      @toleda, for audio patches for the 300 series
      /u/corpnewt, for his superb vanilla guide
      @wmchris for his super XPS 9550 guide and introducing me to hot-patching
      all the developers of clover and it's awesomeness
       
      SSDT-UIAC.aml
      config.plist
      DSDT.aml
      hack2
    • By MaLd0n
      Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder CLOVER Install.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder CLOVER Post Install.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By fen3der
      hi to all There is a touchpad elan1000 but attempts to make the work unsuccessful. Help please solve the problem
    • By DapperDuck
      Quite the title I have chosen for this topic no?
       
      I got my Hackintosh up and running since yesterday. I followed this topic
       and used @MaLd0n 's CLOVER.zip files for kext installation and for the included SSDT's and DSDT. Massive thanks for that btw.
       
      The only *slight* problem I still have is when I have XMP set to profile 1 in the Gigabyte BIOS, and I put my Hackintosh to sleep and I wake it up, I get the message that all USB drives were not ejected properly.
       
      I really don't understand what's causing this problem. I currently have disabled XMP in the BIOS and the USB drives are not getting ejected when my Hack wakes from sleep.
      I use 16GB of Corsair DDR4 Vengeance ram which goes up to 3000MHz. I have XMP profile in CLOVER set to 1. About this Mac reports that my RAM speed is 2998 Mhz. I have a separate SSD drive with Windows on it and I do not think it utilises the full MHz of the RAM because XMP is disabled. 
       
      Hopefully someone is able to help me.
       
      Hackintosh specs:
      Gigabyte Aorus ultimate gaming 
      i7-8700k
      Corsair Vengeance DDR4 3000Mhz RAM (16GB)
      Nvidia GTX 1080
      System def: iMac 18,3
       
      I have my config.plist in the attached files. Hope this gives enough insight. 
      config.plist
×