Jump to content
MaLd0n

[Guide] Sierra / High Sierra on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

3,163 posts in this topic

Recommended Posts

Advertisement
9 hours ago, Sorex said:

Hello MaLd0n,

 

Could you please make DSDT edits for my new Skylake desktop Lenovo M910t 

 

RunMe files:

https://www96.zippyshare.com/v/5bgqAiga/file.html
 

Thank you very much in advance!

https://www33.zippyshare.com/v/R8ITEQAL/file.html
 

Share this post


Link to post
Share on other sites
Posted (edited)

MAld0n, I can't post a new topic on post installation forum. is it on maintenance?

now i can post the topic into post installation problem...

 


Notebook Asus X550VX i7 - 7700hq
GTX950MX - UHD630
A1718086 - 025510ec ALC255 that works only on VoodooHDA 
RTL8111 LAN

Hwinfo
https://drive.google.com/open?id=1n5rHIw-jDPCgocWJtZ0AoVlqIi6Xc7XL

 

Not work:
1. White Screen Wake up
EDID not a asolution
IOREG output http://www.mediafire.com/file/u7odzbaxa7bbb6a/ioregSaved.txt and EDID
http://www.mediafire.com/file/hqlapgf4luwchdf/DisplayProductID-69c.plist

Image
https://ibb.co/faL5wx

2. Battery info status bar sometimes goes on / off like battery has off
3. Crackle Sound using   earphone using VoodooHDA
       Still investigation using patched iomatch voodooha info.plist
       The sound card can’t be using AppleALC, no sound came out using layout 3, 13, 17, 18, 27, 28, 99


I have your (Mald0n) DSDT

 

http://www.mediafire.com/file/lmp5yy65rblx9ne/DSDTtitomaldon2.dsl

 

I have re-patched again for FnKeys and Brighness Key

http://www.mediafire.com/file/5rs93ij0wco99s6/DSDTtitomaldon2editv2.aml



 
codec dump linux
https://drive.google.com/file/d/1pg2y76WvFYsO8vFY-2B_2OLyKMmkQ8Tg/view
 
 
latest debug
http://www.mediafire.com/file/2pjny4eq5r64ed8/debug_1383 (1).zip
 
clover and kext
https://drive.google.com/open?id=1n5rHIw-jDPCgocWJtZ0AoVlqIi6Xc7XL
 

Edited by Babiloe

Share this post


Link to post
Share on other sites

MaLd0n i created my hackintosh but at pci device not show up all device, can help me to makae DSDT

 

My hackintosh specification:

ASUS Z270 MAXIMUS IX CODE BIOS 1301

Core i5 7600K overclock 4.8Ghz

Memory 16GB

AMD RADEON RX 560

Use pci card broadcom wifi & bluetooth

 

DSDT and clover compile RunMe.app

 

 

Share this post


Link to post
Share on other sites

Thank you, thank you, thank you!!  I've been trying to reinstall Sierra on my Hackintosh for months but finally succeeded by using this link.  I can't believe it.  I'll delete the Chopintosh install in a few days after finalizing this install.

Share this post


Link to post
Share on other sites
15 minutes ago, santes said:

Recently i am having some issue with screen flickering...i had this in past but rarely came....but now its everyday issue... so plz anyone help me... 

 

You has installed IntelGraphicsFixup.kext and lilu.kext ?

Share this post


Link to post
Share on other sites
1 hour ago, rubahgeni said:

MaLd0n i created my hackintosh but at pci device not show up all device, can help me to makae DSDT

 

My hackintosh specification:

ASUS Z270 MAXIMUS IX CODE BIOS 1301

Core i5 7600K overclock 4.8Ghz

Memory 16GB

AMD RADEON RX 560

Use pci card broadcom wifi & bluetooth

 

DSDT and clover compile RunMe.app

 

 

https://www100.zippyshare.com/v/bXi8t5Ri/file.html
 

Share this post


Link to post
Share on other sites
2 hours ago, rubahgeni said:

 

You has installed IntelGraphicsFixup.kext and lilu.kext ?

Already have All required Kext

Share this post


Link to post
Share on other sites
4 minutes ago, santes said:

Already have All required Kext

 

Did you use a Kext Installer?

Share this post


Link to post
Share on other sites
4 hours ago, Mikentosh2016 said:

 

Did you use a Kext Installer?

no.. i put in EFI folder 

Share this post


Link to post
Share on other sites
Posted (edited)
1 hour ago, santes said:

no.. i put in EFI folder

 

 

What about /System/Library/Extensions?

Edited by Mikentosh2016
More line space.

Share this post


Link to post
Share on other sites
22 hours ago, santes said:

Already have All required Kext

This issue seems like from hardware accelaration.
Has you installed shiki.kext to?

Shiki v2.2.6
Disabled hardware accelerated renderer hacks on 10.13.4 and newer (Apple fix)

Share this post


Link to post
Share on other sites
30 minutes ago, rubahgeni said:

MaLd0n, can you help me to create DSDT?

 

Hardware Specification

Motherboard ASUS Z170i STRIX

Processor Intel core i5 6600K 4,6Ghz

16 GB

AMD RADEON RX560

 

This is DSDT and compile with runme.app

https://www61.zippyshare.com/v/cih2UHkl/file.html
 

Share this post


Link to post
Share on other sites

Hello MaLd0n:

The following is my Hackintosh platform:

CPU:i7 8400

MB:Galaxy B360M-M.2

RAM:G.skill DDR4 2133 8G

Audio:Alc 662-VD

 

Trouble for me to make DSDT, thanks
The ALC662-VD does not work. Injecting 5,7,11,12,13 does not work. How can I get him to work? AppleALC does not support ALC662-VD?

 

Attach Files is run me app to Files

 

https://drive.google.com/open?id=1Sh0DKBTEVj25Dw0QCZxCYApANgmw5Vxf

Share this post


Link to post
Share on other sites
5 hours ago, visin said:

Hello MaLd0n:

The following is my Hackintosh platform:

CPU:i7 8400

MB:Galaxy B360M-M.2

RAM:G.skill DDR4 2133 8G

Audio:Alc 662-VD

 

Trouble for me to make DSDT, thanks
The ALC662-VD does not work. Injecting 5,7,11,12,13 does not work. How can I get him to work? AppleALC does not support ALC662-VD?

 

Attach Files is run me app to Files

 

https://drive.google.com/open?id=1Sh0DKBTEVj25Dw0QCZxCYApANgmw5Vxf

send me new files after reboot

CLOVER.zip

u can try...

MaLd0n 2018-04-29 às 10.39.11.png

Share this post


Link to post
Share on other sites
5 minutes ago, rubahgeni said:

MaLd0n, i use this clover sleep can work perfect but when shutdown my hackintosh always restart.

I try use FixShutdown, SlpSMiAtWake but this issue can't solved.

 

What is solution for shutdown issue?

DSDT.aml.zip

Share this post


Link to post
Share on other sites
Posted (edited)

 

23 hours ago, MaLd0n said:

send me new files after reboot

CLOVER.zip

u can try...

MaLd0n 2018-04-29 às 10.39.11.png

I used the clover you provided and found the following questions:

1. Look at DSDT. There is a mistake.

1717479639_2018-04-294_18_12.png.00c7841b72135d3e3fe51b8c0c38976d.png

2, PCI devices are only EMI Controller and UHD 630.

830462746_2018-04-294_18_28.png.3e71fb2900450de2b0628acd6c2f39ef.png

3, There are problems to turn off and restart.

(1) no power is cut off, the machine is still running, but there is no image on the monitor.

(2) the restart state is the same as the shutdown, and the monitor has no image.

4, Audio still do not work, I injected 5, 7, 11, 12, 13, no effect, I checked the information, some solution is in the DSDT Patch, I put it below, you see if there is any use.

(1)HDEF_Patch

#Automatically adjusted by AppleHDA Patcher.app
# original by RehabMan


#   Inject Audio info
into method label _DSM parent_label HDEF remove_entry;
into device label HDEF insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
    If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n
    Return (Package()\n
    {\n
        "AAPL,slot-name", Buffer() { "Built in" },\n
        "layout-id", Buffer() { 0x05, 0x00, 0x00, 0x00 },\n
        "device_type", Buffer() { "Audio Controller" },\n
        "built-in", Buffer() { 0x00 },\n
        "PinConfigurations", Buffer() { },\n
        "hda-gfx", Buffer() { "onboard-1" }\n
    })\n
}\n
end

(2)IRQ_Fix

{\rtf1\ansi\ansicpg936\cocoartf1561\cocoasubrtf200
{\fonttbl\f0\fswiss\fcharset0 Helvetica;}
{\colortbl;\red255\green255\blue255;}
{\*\expandedcolortbl;;}
\paperw11900\paperh16840\margl1440\margr1440\vieww10800\viewh8400\viewkind0
\pard\tx566\tx1133\tx1700\tx2267\tx2834\tx3401\tx3968\tx4535\tx5102\tx5669\tx6236\tx6803\pardirnatural\partightenfactor0

\f0\fs24 \cf0 #Maintained by: RehabMan for: Laptop Patches\
#system_IRQ.txt\
\
# This can fix non-working audio and also has an affect on HPET.\
#\
# Use this if you have issues with patched AppleHDA (required on almost all laptops)\
# or if you have issues with HPET (restart after wake).\
\
# IRQ fix\
into device name_hid PNP0000 code_regex IRQNoFlags\\s\\(\\)\\n\\s+\\\{(\\d+)\\\} remove_matched;\
into device name_hid PNP0100 code_regex IRQNoFlags\\s\\(\\)\\n\\s+\\\{(\\d+)\\\} remove_matched;\
into device name_hid PNP0B00 code_regex IRQNoFlags\\s\\(\\)\\n\\s+\\\{(\\d+)\\\} remove_matched;\
into device name_hid PNP0103 code_regex IRQNoFlags\\s\\(\\)\\n\\s+\\\{.*\\\} removeall_matched;\
into device name_hid PNP0103 code_regex Name\\s\\(([^,]+),\\sResourceTemplate\\s\\(\\).*\\n\\s+\\\{((?:.|\\n)*)\\\}\\) replace_matched\
begin\
Name (%1, ResourceTemplate()\\n\
\{\\n\
    IRQNoFlags() \{ 0, 8, 11, 15 \}\\n\
%2\
\})\\n\
end;}

I got the Codec#0 of the audio, but I didn't compile AppleALC.

codec#0


Verbs from Linux Codec Dump File: codec#0

Codec: Realtek ALC662 rev3   Address: 0   DevID: 283903586 (0x10ec0662)

   Jack   Color  Description                  Node     PinDefault             Original Verbs
--------------------------------------------------------------------------------------------------------
    1/8   Black  Speaker at Ext Rear         18 0x12   0x411111f0   01271cf0 01271d11 01271e11 01271f41
    1/8   Green  Line Out at Ext Rear        20 0x14   0x01014010   01471c10 01471d40 01471e01 01471f01
 Analog UNKNOWN  Speaker at Ext N/A          21 0x15   0x4017c040   01571c40 01571dc0 01571e17 01571f40
    1/8   Black  Speaker at Ext Rear         22 0x16   0x411111f0   01671cf0 01671d11 01671e11 01671f41
 Mic at Ext Rear    0x18 0x18                        27365408 01871c20 01871d90     01871ea1 01871f01  
 Mic at Ext Front    0x19 0x19                        44142625 01971c21 01971d90     01971ea1 01971f02  
 Line In at Ext Rear    0x1a 0x1a                        25243695 01a71c2f 01a71d30     01a71e81 01a71f01  
 HP Out at Ext Front    0x1b 0x1b                        35733535 01b71c1f 01b71d40     01b71e21 01b71f02  
    1/8   Black  Speaker at Ext Rear         28 0x1c   0x411111f0   01c71cf0 01c71d11 01c71e11 01c71f41
Optical UNKNOWN  Mic at Ext N/A              29 0x1d   0x40a5c641   01d71c41 01d71dc6 01d71ea5 01d71f40
    1/8   Black  Speaker at Ext Rear         30 0x1e   0x411111f0   01e71cf0 01e71d11 01e71e11 01e71f41
--------------------------------------------------------------------------------------------------------


   Jack   Color  Description                  Node     PinDefault             Modified Verbs
--------------------------------------------------------------------------------------------------------
    1/8   Green  Line Out at Ext Rear        20 0x14   0x01014010   01471c10 01471d40 01471e01 01471f01
 Analog UNKNOWN  Speaker at Ext N/A          21 0x15   0x4017c040   01571c40 01571dc0 01571e17 01571f40
 Mic at Ext Rear    0x18 0x18                        27365408 01871c20 01871d90     01871ea1 01871f01  
 Mic at Ext Front    0x19 0x19                        44142625 01971c30 01971d90     01971ea1 01971f01  
 Line In at Ext Rear    0x1a 0x1a                        25243695 01a71c50 01a71d30     01a71e81 01a71f01  
 HP Out at Ext Front    0x1b 0x1b                        35733535 01b71c60 01b71d40     01b71e21 01b71f01  
Optical UNKNOWN  Mic at Ext N/A              29 0x1d   0x40a5c641   01d71c70 01d71dc0 01d71ea5 01d71f40
--------------------------------------------------------------------------------------------------------

I re run send_Me

https://drive.google.com/open?id=16LHBuWvxh-HYT3gT1HqxRtw-WnqoTsaH

 

 

Edited by visin

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Gymnae
      Introduction
      The H370 chipset powers 8th generation Intel Core-i CPUs. Even though the name H370 rings comparable to Z370, the H370 is based on newer silicon. This it also requires some new approaches compared to the Z370. An example would be on-die USB 3.1 and WiFi support.
       
      Since this guide is not a "hold-your-hand-every-step" guide, I assume you know:
      Clover installation and configuration How to create an install medium for MacOS Access and configure the BIOS Have heard of ACPI patching (I'm a newb at this myself)  
      What works
      Sleep (via DSDT edits and emulated NVRAM) On-board Audio (via CloverALC script) Native power management (without any kext or patch) All USB ports (and only those present are active) iGPU for both acceleration and display dGPU (I'm running an Nvidia GTX 1080)  
      Untested
      NIC --> I'm using WiFi only  
      What doesn't work
      Native NVRAM via AptioMemoryFix.efi DMVT Pre-alloc higher than 64MB (but not necessary)  
      Changes to the guide:
      22.5.18: Added SSDT hot-patching to enable sleep, replacing DSDT static patching as an alternative.
      23.5.18: Add iMac18,1 as alternative SMBIOS config for those relying on the iGPU for output
       
      1. Installation
      This guide heavy inspired by the work of /u/corpnewt of /r/hackintosh and his (sorta) Vanilla guide
       
      1.1 Create the install media for MacOS
      Follow this, if you are using a Mac to start off with. If you are totally new to MacOS, then please check the basic guide Creation of an installer media in windows or linux
       
      1.2 Install Clover on the install media
      Using the Clover installer, ensure you are installing to the USB medium you are using for the installer.
      Chose the following options:
      AptioMemoryFix UEFI booting only Install to ESP You have to get your hands on an apfs.efi. A google search can help, or extracting it from the Installer package. Make sure you procure a version matching the MacOS version you are about to install. Place the apfs.efi in drivers64UEFI.
       
      1.2 Adjust the config.plist for the installer
      You can use the config.plist attached as a guideline, but take a look at it before and at least adjust the SMBIOS - otherwise it won't boot.
      Attention: The attached plist contains audio patches introduced by a post-install step. If you run into problems, you might remove those. It also contains a manual slide value, which should normally not be needed, but works fine for me. It is also tuned for usage with an Nvidia Pascal dGPU as main GPU.
       
      The config you create now should serve you nicely for install and running the system.
       
      Take care of adding the following basics:
      SMBIOS: iMac18,3 - You can generate a serial number via Clover Configurator. The creation of a proper SMBIOS is covered in many guides to good extend Note: If you aim at using the iGPU for output, a user reported that iMac18,1 works better - since iMac18,3 produces sever flicker. Look at the graphics section and adjust the injection for Intel to your situation  
      Fixes

      Patches

      Devices

      Graphics

      Kernel and Kext patches
       
      1.3 kexts and friends
      Add the supplied SSDT-UAIC.aml to "patched" - it limits the injected USB Ports to the actual number and ports valid for this board.
       
      Required kexts on "Other":
      FakeSMC.kext IntelGraphicsFixup.kext Lilu.kext When having an Nvidia card: NvidiaGraphicsFixup.kext IntelMausiEthernet.kext in case you're running Ethernet USBInjectAll.kext with the HCI-300-series-injector.kext --> These two should be installed to /L/E after install  
      We are leaving sound out at the moment, this is something for post-install. Please note the absence of Shiki, I don't find it necessary. Video material I tried made use of the iGPU without shiki.
       
      1.4 Check BIOS and install
      You should be ready for install. But before you reboot, please take a look at your BIOS and set it up accordingly (copied from the aforementioned guide and adapted):
      Load Optimized Defaults Disable VT-d setting If your system has Secure Boot Mode, disable it Set OS Type to Windows 8/10 or OtherOS - I have not seen a difference Turn off internal Serial and Parallel port Turn off Network stack for boot Turn off wake-on-lan (for now) Set XHCI Handoff to Enabled Don't enable decode over 4G Depending on your GPU, set priority for boot Set internal GPU to enable Set DMVT pre-alloc to 64MB Set USB legacy to enabled Activate XMP profile 1 f your Ram has it (mine doesn't and I added the timings manually) Set ERP to enable, disable platform power management (I need to do more research if this could be enabled)  
      I've attached my current BIOS config "hack2". You can place that on a fat32 drive (the EFI partition of your install USB drive might be an idea) and see if it loads. It's made for and with the F2 BIOS.
       
      The install itself should be like other MacOS Hackintosh installs with it several reboots and ensuring to select the correct boot device in Clover.
       
      2. Post-install
       
      2.1 Install clover on target
      This is a no-brainer, but install a fresh copy of Clover on your target medium.
       
      During install select again AptioMemoryFix but also additionally
      EmuVariableUefi-64.efi Install RC scripts on target volume because otherwise NVRAM doesn't seem to work
       
      After the install, copy
      config.plist contents of "Other" content of "patched" apfs.efi from drivers64UEFI to your new clover install.
       
      2.1 Edit ACPI for slumber
      Choose one option, not both. The hot-patch is experimental, but for the moment it is stable.
       
      2.1.1 Edit DSDT
      This is necessary only once on initial install and every time, you edit or upgrade the BIOS. The DSDT.aml attached to this post might work for your system or give you a file to compare to. Don't expect it to work for you, though.
      I won't go into the details of DSDT extraction and patching. There are better guides (the linked guide is a rip-off of rehabman's guide from a different forum). Please follow such a guide to extract your ACPI data.
       
      Locate and disassemble the DSDT with the newest iasl binary you can put your hands on, then open it with MacIASL in its newest version you can find (Hint: Here is a good source) You can check if the version is new enough if MacIASL doesn't throw error upon compiling a freshly extracted DSDT.aml or DSDT.dst
       
      Add rehabmans repo (as per linked guide) and apply the following patches:
      Rename _DSM to _XDSM Fix _WAK Arg0 v2 USB3 _PRW 0x6D Skylake (instant wake) Find the CNVW device and remove the _PWR function there.
       
      Compile the DSDT and place it in "patched".
       
      2.1.2 Use SSDT hot-patching
      Instead of having to re-extract and re-patch the DSDT on every BIOS change or update, Hardware change one can also use ACPI hot-patching.
      It's a combination of config.plist patches and an SSDT, which is hot-patched into the ACPI (if I understand the process correctly)
       
      You need to add this SSDT-GPRW.aml to your Clover folder in the designated position at Clover/ACPI/patched You need to add this patch to your config.plist. It goes into the DSDT patch section  
      Note: This works for me, but the patch removes the _PRW method from all devices in the DSDT. This could have side-effects. So far, I have seen none. At the moment I'm also not applying any other patch, compared with the additional edits I made to the DSDT method before.
       
      2.2 Install kexts to system
      As mentioned in the install section, it's better to follow rehabman's instruction and install USBinjectAll.kext to /L/E:
      sudo cp -R Release/USBInjectAll.kext /Library/Extensions sudo touch /System/Library/Extensions && sudo kextcache -u / 2.3 Enable onboard Audio
      This is where I'm not so happy currently, I'd like it to work without altering AppleHDA. But currently I find no other way.
       
      2.3.1 Install FakePCIID & FakePCIID_Intel_HDMI_Audio
      Rehabman tells us to use a kext installer to install it to /S/L/E. Chose the RELEASE folder
       
      2.3.2 Run CloverALC command
      Ensure your EFI partition is mounted before running this command
      Get the newest version of CloverALC command (audio_cloverALC-xxx.sh) and run it. Our Audio codec is RTL887 and I'm running with layout ID 1
       
      2.4 Optional steps
      If you have a dGPU, now it's the time to install its drivers and adjust the config.plist for it.
      This is out of scope of this guide. Yet, my supplied config.plist is ready to be used with Nvidia Pascal cards and using the Nvidia web driver.
       
      3. ToDo
      Move away from static DSDT patching to SSDT hotpatching --> requires my work Native NVRAM --> requires developer work Audio without AppleHDA patching --> requires developer work  
      4. Thanks to
      @MaLd0nfor helping finding the right way with the DSDT
      @RehabMan, for being a legend and helping me out patching
      @toleda, for audio patches for the 300 series
      /u/corpnewt, for his superb vanilla guide
      @wmchris for his super XPS 9550 guide and introducing me to hot-patching
      all the developers of clover and it's awesomeness
       
      SSDT-UIAC.aml
      config.plist
      DSDT.aml
      hack2
    • By MaLd0n
      Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder CLOVER Install.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder CLOVER Post Install.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By fen3der
      hi to all There is a touchpad elan1000 but attempts to make the work unsuccessful. Help please solve the problem
    • By DapperDuck
      Quite the title I have chosen for this topic no?
       
      I got my Hackintosh up and running since yesterday. I followed this topic
       and used @MaLd0n 's CLOVER.zip files for kext installation and for the included SSDT's and DSDT. Massive thanks for that btw.
       
      The only *slight* problem I still have is when I have XMP set to profile 1 in the Gigabyte BIOS, and I put my Hackintosh to sleep and I wake it up, I get the message that all USB drives were not ejected properly.
       
      I really don't understand what's causing this problem. I currently have disabled XMP in the BIOS and the USB drives are not getting ejected when my Hack wakes from sleep.
      I use 16GB of Corsair DDR4 Vengeance ram which goes up to 3000MHz. I have XMP profile in CLOVER set to 1. About this Mac reports that my RAM speed is 2998 Mhz. I have a separate SSD drive with Windows on it and I do not think it utilises the full MHz of the RAM because XMP is disabled. 
       
      Hopefully someone is able to help me.
       
      Hackintosh specs:
      Gigabyte Aorus ultimate gaming 
      i7-8700k
      Corsair Vengeance DDR4 3000Mhz RAM (16GB)
      Nvidia GTX 1080
      System def: iMac 18,3
       
      I have my config.plist in the attached files. Hope this gives enough insight. 
      config.plist
×