Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

4,959 posts in this topic

Recommended Posts

15 minutes ago, MaLd0n said:

Yes

u have a fullç dsdt patched, i just patched again with some news patches

DSDT.aml.zip

There is something wrong with my CPU frequency as CPU-S shows that the lowest freq level is 3000MHz. Can DSDT patch solve this problem?

I've tried what you posted, but not working with this problem.

 

By the way, enjoy your beer.

 

 

Edited by Leegenux

Share this post


Link to post
Share on other sites
Advertisement
3 minutes ago, Leegenux said:

There is something wrong with my CPU frequency as CPU-S shows that the lowest freq level is 3000MHz. Can DSDT patch solve this problem?

I've tried what you posted, but not working with this problem.

 

 

check with IntelPowerGadget

https://software.intel.com/file/778485/download

Share this post


Link to post
Share on other sites

Dear MaldOn,

 

i have a problem with RunMe

 

What can I do?

 Thanks

Capture d’écran 2018-11-18 à 14.47.53.png

Share this post


Link to post
Share on other sites
13 minutes ago, jym said:

Dear MaldOn,

 

i have a problem with RunMe

 

What can I do?

 Thanks

 

https://www.youtube.com/watch?v=k9wmIfGLe3A

7 minutes ago, doixanh said:

I have a fully  working i5 9600k on MSI Z390-A PRO mobo like in signature. Very happy with it :-)

 

cpu type = 0x0a05

Share this post


Link to post
Share on other sites
On 11/16/2018 at 12:07 AM, augustopaulo said:

Thanks MaLd0n.

 

I came up with attached config.plist, but result is still the same:

IMG_1351.thumb.JPG.2dbdd35c3984afb29ebf6c6f56d5a118.JPG

 

I've also taken a picture of the BIOS in regards to video memory:

IMG_1352.thumb.JPG.af32a87566935de6308cd681d58c5828.JPG

 

config.plist

Hi MaLd0n,

 

Could you please have a look at my config.plist, that still doesn't allow me to have graphics HW acceleration...

 

Obrigado ;-)

 

Paulo

 

 

 

Share this post


Link to post
Share on other sites
4 hours ago, augustopaulo said:

Hi MaLd0n,

 

Could you please have a look at my config.plist, that still doesn't allow me to have graphics HW acceleration...

 

Obrigado ;-)

 

Paulo

use a IntelFBPatcher topic, just create a framebuffer patch

Share this post


Link to post
Share on other sites
On 11/17/2018 at 9:26 AM, rajkhand said:

I tried many times to update from High Sierra to Mojave but after the first boot it will show many lines on verbose mode and then my screen will go in power saver mode and nothing will happen.

Then I tried to update instead of my NVME drive an external USB cloned drive, the same thing happened again and the screen went in power saver mode but I saw that the the USB HDD's activity LED was flickering so I knew that something was happening so I let it continue, I suddenly got an idea to switch my Dell p2415q input from mDP to HDMI and the screen came to life and was able to see the screen and it was the apple logo with progress bar underneath telling me that it will take another 24 minutes! So the culprit was the monitor/display. So with display port connection the screen went to power saver mode but not with HDMI, don't know the reason!

 

The update was successful but there was flickering and once the resolution changed to something like 600x800. I experimented and changed the ig-platform -id from 59120000 to 3E910003 and now everything works with my mDP connection. Let me tell you I am no expert, I just experimented. Now all seems well except No Sleep.

 

Sending the runme file, please advice and do your magic to make everything work.

Thanks

Send me Rajs-iMac.zip

Used your clover folder and DSDT but the display has high flickering sending you the runme file

Send me Rajs-iMac.zip

Share this post


Link to post
Share on other sites

MaLd0n HELP PLEASE SET UP THE SYSTEM.

Intel Core i3 7130u
-Sets of instructions x86, x86-64, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AVX, AVX2, FMA
Mother Aspire C22-860
8Gb DDR4 RAM
Intel (R) HD Graphics 620 video integrated
Sound-Realtek ALC269
WI-FI-Qualcomm Atheros QCA9377 802.11ac
Network-Realtek RTL8168 / 8111

Send me iMac-Viki.zip

Share this post


Link to post
Share on other sites
25 minutes ago, korlione2009 said:

MaLd0n HELP PLEASE SET UP THE SYSTEM.

Intel Core i3 7130u
-Sets of instructions x86, x86-64, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AVX, AVX2, FMA
Mother Aspire C22-860
8Gb DDR4 RAM
Intel (R) HD Graphics 620 video integrated
Sound-Realtek ALC269
WI-FI-Qualcomm Atheros QCA9377 802.11ac
Network-Realtek RTL8168 / 8111

Send me iMac-Viki.zip

DSDT.aml.zip

Share this post


Link to post
Share on other sites

Hi @MaLd0n - I thought it might be preferable for others to have the help you provide.  I am pretty far along but struggling with wifi.  Current runme.app attached.

Send me Adams-MacBook-Pro.zip

 

I now see that my wifi adapter doesn't work as it's Intel.  I purchased USB-AC53 Nano which works, but handoff, even with functioning Bluetooth and wifi doesn't work.  Suggestions?  

Edited by riddlemeright

Share this post


Link to post
Share on other sites
On 11/15/2018 at 12:42 AM, MaLd0n said:

test and let me know

Hi @MaLd0n, I come back with test result. CMOS corruption randomly triggered by macOS reboot, which happens during macOS install or upgrade. To test it, I re-installed 10.14 to another disk, upgraded to 10.14.1 afterwards. I got no CMOS corruption so far, I believe it has been fixed. Thank you very much.

Share this post


Link to post
Share on other sites
On 11/19/2018 at 9:53 PM, MaLd0n said:

I read the guide (many times)but not able to understand how to patch intel gpu frame-buffer is this patching CPU dependent or system motherboard + BIOS dependent? Is there a more simpler guide?

Share this post


Link to post
Share on other sites
2 minutes ago, rajkhand said:

I read the guide (many times)but not able to understand how to patch intel gpu frame-buffer is this patching CPU dependent or system motherboard + BIOS dependent? Is there a more simpler guide?

https://translate.google.com/translate?js=n&sl=auto&tl=en&u=https://blog.daliansky.net/Intel-FB-Patcher-tutorial-and-insertion-pose.html

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member

  • Similar Content

    • By fighttoby
      I have tried to install clover via no UEFI legacy mode (and with UEFI method) using the method here (http://www.tonymacx86.com/yosemite-desktop-guides/144426-how-install-os-x-yosemite-using-clover.html)
      both times I can get to just past the clover boot screen and it freezes after that.
      I have verbose (-v) selected in boot options: On the non-UEFI install then it hangs on:
      "Waiting on <dict ID="0"><key>IOProviderClass</key>...."
       
      I have had a lot of issues with trying to get the installer working and many different things that had to be disabled but now it just gets to here and stops. Some times it will glitch out on this screen and give me a the circle with the line through it and text garbage around it where the text in the pictures are.
       
      Need help please.
       
      This is the laptop im using the specs are the same nothing has changed.
      https://www.asus.com/Laptops/ASUS_VivoBook_X202E/


      config.plist
    • By mossy
      so im trying to install El Capitan on my old laptop but im having mouse issues i tried all the kext and looked online 
       
      this is TUT i followed 
       
      https://osxlatitude.com/forums/topic/8645-dell-latitude-d630-with-core2duo-and-nvidia-quadro-nvs-135m-el-capitansierra/
       
      ASUS K50IN T6500
    • By dbx103
      I Have Full and meta display, I can't control display.
      debug_27160.zip
    • By maxneko
      TLDR: I've gotten myself up a creek without even a working keyboard and mouse. 
       
      My setup
       
      Asus X99 Deluxe motherboard
      Dual Asus Radeon R9 280x GPU's
      i7 5930K CPU
      G.Skill - Ripjaws Series 32 GB (4 x 8 GB) DDR4-2400 Memory
      Highpoint 2721 RAID controller + 4 hard drives
      EVO 850 Pro SSD
      Mojave 10.14.4
      Profile: MacPro6,1
       
      I had installed Mojave and had set it up to boot directly into my user account with no need for a password. Both Clover and IORegistryExplorer were set as log-in items. This was because I was working on activating my SS ports. The X99 Deluxe USB ports are set up as follows:
       
      USB3_E1 to USB3_E10 at the rear (Asmedia controller)
      USB_13 & USB_14 at the rear (Intel)
      USB1112 & USB1314 (headers on the motherboard)
      USB3_12 & USB3_34 (front)
       
      This adds up to potentially 34 ports, far more than I need. I had three patches enabled to remove the 15 port limit but they weren't doing the trick. So I disabled the ten USB3 ports on the rear that are subject to the Asmedia controller in BIOS. I also disabled the Asmedia USB3 controller. All I really need are the four USB3 ports on the front panel, along with one of the motherboard USB2 headers. This should have gotten me down to under 15 ports. One SS port appeared in IORegistryExplorer but I couldn't locate it when I tested every active port.
       
      I'm not sure what I did but everything went sideways. I found that I was booting into Mojave, Clover and IORegistryExplorer were launching but the mouse cursor was frozen in the corner and the keyboard was dead. Moving the keyboard and mouse to different ports didn't help. Meanwhile the OS was giving me a message about looking for a BT keyboard which I don't have. 
       
      I've tried the following to no avail:
       
      -- reinstalling Mojave
      -- various combinations of USBInjectAll.kext, XHCI-X99-injector.kext, X99_Injector USB 3.kext, and GenericUSBXHCI.kext
      -- resetting the CMOS
      -- enabling and disabling the ten Asmedia USB3 ports on the rear
      -- enabling and disabling the port limit patches below:
       

       

       
      I haven't reflashed my BIOS which is something I do when starting from scratch, although I don't see why it would matter. I'm open to that, burning incense, whatever will help.  In the end, I need at least 1-2 working USB3 ports. But right now, I just need to get my keyboard and mouse working again. I've been going in circles on this all day and could really use some good ideas.
       
      Thanks so much.
       
      Max
       
      config copy.plist
×