Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

4,890 posts in this topic

Recommended Posts

3 minutes ago, plofplof said:

Hi MaldOn, for mojave there are no Nvidia drivers, so I used the output of the board with UHD 630, monitor is connected via HDMI or DVI. Unfortunately I have a flickering picture. Can you help ? 

 

Send me don.zip

Edited by plofplof

Share this post


Link to post
Share on other sites
Advertisement
2 minutes ago, semson said:

That is fast! Thanks a lot @MaLd0n, will test it out. what is the key fix for this issue? I mean random BIOS corruption.

test and let me know

Share this post


Link to post
Share on other sites

@plofplof I am using HD630 from i5-8400. It is easily drived with WhatEverGreen, just to make sure you have DVMT >128MB. Someone saying lower DVMT could casue flickering.

3 minutes ago, MaLd0n said:

test and let me know

Sure will. I guess it takes time as this strange BIOS corruption happens randomly and rarely. But once it happened, I have to open the case and did the CLR RESET:(

Share this post


Link to post
Share on other sites
17 minutes ago, semson said:

@plofplof I am using HD630 from i5-8400. It is easily drived with WhatEverGreen, just to make sure you have DVMT >128MB. Someone saying lower DVMT could casue flickering.

Sure will. I guess it takes time as this strange BIOS corruption happens randomly and rarely. But once it happened, I have to open the case and did the CLR RESET:(

extract new SEND_ME with new folder

RunMe.app

Share this post


Link to post
Share on other sites
On ‎11‎/‎13‎/‎2018 at 8:25 PM, MaLd0n said:

use -x or uncheck InjectIntel

Now it boots thanks, can you guide me how to update my high sierra drive with this bootable USB.

 

I have a perfectly working High Sierra Cloned external drive and I want to try update it so I don't disturb my main internal NVME drive.

Can I use the same EFI folder of the High Sierra drive after update?

With InjectIntel uncheck will it have any effect on my display? What is the remedy?

Thanks 

Share this post


Link to post
Share on other sites
On 11/9/2018 at 12:13 AM, MaLd0n said:

 

On 11/8/2018 at 11:53 PM, Handzo85 said:

@MaLd0n i have acpi error after change bios setting for overclock purpose. tried to update bios version didn't solved my problem. this my latest acpi file hoping you help me fixing it. 

IMG_4348.jpg

Send me HanZos-iMac.zip

 

On 11/9/2018 at 12:20 AM, Handzo85 said:

thx a lot sir.. you save my life :angel:

Dear @MaLd0n after few day using my hackintosh.. i suddenly found same error while happened after i shutdown pc or reboot.

can you help me to find out error section on my dsdt 

WhatsApp Image 2018-11-15 at 19.41.06.jpeg

DSDT.aml

Share this post


Link to post
Share on other sites
4 hours ago, Handzo85 said:

 

 

Dear @MaLd0n after few day using my hackintosh.. i suddenly found same error while happened after i shutdown pc or reboot.

can you help me to find out error section on my dsdt 

 

DSDT.aml

just ignore it, need remove some devices in DSDT and SSDT too

Share this post


Link to post
Share on other sites
On 11/14/2018 at 4:06 PM, plofplof said:

 

On 11/14/2018 at 4:28 PM, MaLd0n said:

 

Great MaLdOn, thanks a lot and enjoy your beer(s). I´ll check it and reply.

Edited by plofplof

Share this post


Link to post
Share on other sites

 

On 11/11/2018 at 12:56 PM, MaLd0n said:

if u mod in boot just change in next boot, after it old config is back

just create a dvmt patch ad us correct ig-platform-id, i think work

 

How do I do that ? Do you know guides ? Even from olarila  ?

 

Quick test: If I remove fakeID=0x122345678, I get a kernel panic, see below:

thumbnail_IMG_1350.thumb.jpg.3382591a89d96c83fa4a17dbb8b2b12f.jpg

Share this post


Link to post
Share on other sites
2 hours ago, plofplof said:

unfortunately no change, still with screen tearing in Mojave, high sierra without problems.:(

Send me don 2.zip

check here

https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v164/

27 minutes ago, augustopaulo said:

 

 

How do I do that ? Do you know guides ? Even from olarila  ?

 

Quick test: If I remove fakeID=0x122345678, I get a kernel panic, see below:

 

https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v164/

Share this post


Link to post
Share on other sites
55 minutes ago, MaLd0n said:

Thanks MaLd0n.

 

I came up with attached config.plist, but result is still the same:

IMG_1351.thumb.JPG.2dbdd35c3984afb29ebf6c6f56d5a118.JPG

 

I've also taken a picture of the BIOS in regards to video memory:

IMG_1352.thumb.JPG.af32a87566935de6308cd681d58c5828.JPG

 

config.plist

Share this post


Link to post
Share on other sites
9 hours ago, MaLd0n said:

just ignore it, need remove some devices in DSDT and SSDT too

What device for? can i just remove/ unplug incompatible one.. coz sometimes i get boot stuck while appear above error.

im affraid can't boot & get in to OS onward, when i hv important project file inside that i can't access it.

i still confuse where error came from, from incompatible efi bootloader version, kext or any other with my sistem?

please check my actual runme files below

 

Send me HanZos-iMac.zip

Share this post


Link to post
Share on other sites

I tried many times to update from High Sierra to Mojave but after the first boot it will show many lines on verbose mode and then my screen will go in power saver mode and nothing will happen.

Then I tried to update instead of my NVME drive an external USB cloned drive, the same thing happened again and the screen went in power saver mode but I saw that the the USB HDD's activity LED was flickering so I knew that something was happening so I let it continue, I suddenly got an idea to switch my Dell p2415q input from mDP to HDMI and the screen came to life and was able to see the screen and it was the apple logo with progress bar underneath telling me that it will take another 24 minutes! So the culprit was the monitor/display. So with display port connection the screen went to power saver mode but not with HDMI, don't know the reason!

 

The update was successful but there was flickering and once the resolution changed to something like 600x800. I experimented and changed the ig-platform -id from 59120000 to 3E910003 and now everything works with my mDP connection. Let me tell you I am no expert, I just experimented. Now all seems well except No Sleep.

 

Sending the runme file, please advice and do your magic to make everything work.

Thanks

Send me Rajs-iMac.zip

Share this post


Link to post
Share on other sites
1 hour ago, rajkhand said:

I tried many times to update from High Sierra to Mojave but after the first boot it will show many lines on verbose mode and then my screen will go in power saver mode and nothing will happen.

Then I tried to update instead of my NVME drive an external USB cloned drive, the same thing happened again and the screen went in power saver mode but I saw that the the USB HDD's activity LED was flickering so I knew that something was happening so I let it continue, I suddenly got an idea to switch my Dell p2415q input from mDP to HDMI and the screen came to life and was able to see the screen and it was the apple logo with progress bar underneath telling me that it will take another 24 minutes! So the culprit was the monitor/display. So with display port connection the screen went to power saver mode but not with HDMI, don't know the reason!

 

The update was successful but there was flickering and once the resolution changed to something like 600x800. I experimented and changed the ig-platform -id from 59120000 to 3E910003 and now everything works with my mDP connection. Let me tell you I am no expert, I just experimented. Now all seems well except No Sleep.

 

Sending the runme file, please advice and do your magic to make everything work.

Thanks

Send me Rajs-iMac.zip

DSDT.aml.zip

use my clover folder for serie 100,200,300 and last clover version

Share this post


Link to post
Share on other sites

Hi! Can you help me? I have an HP Pavilion Power cb012ns with an i7 7700HQ and a GTX 1050ti and 8gb ram, everything it's working perfect, but the brightness of the screen it's not at all, the battery indicators doesnt appears, and sound too. I don't know if you can help me :( Thank you so much in advance. And after the laptop was sleeped and i wake it it freezed and no more way to start the laptop again, always a kernel panic relationed with CPU.

ACPI-ORIGIN_sickxdemon.zip

Send me MacBook-Pro-sickxdemon.zip

Share this post


Link to post
Share on other sites
1 hour ago, alexdemons2000 said:

Hi! Can you help me? I have an HP Pavilion Power cb012ns with an i7 7700HQ and a GTX 1050ti and 8gb ram, everything it's working perfect, but the brightness of the screen it's not at all, the battery indicators doesnt appears, and sound too. I don't know if you can help me :( Thank you so much in advance. And after the laptop was sleeped and i wake it it freezed and no more way to start the laptop again, always a kernel panic relationed with CPU.

ACPI-ORIGIN_sickxdemon.zip

Send me MacBook-Pro-sickxdemon.zip

DSDT.aml.zip

DSDT.DISABLE NVIDIA.PNLF.zip

Share this post


Link to post
Share on other sites
3 hours ago, Leegenux said:

Hello, @MaLd0n, could you please patch a DSDT for me. Here is requested files.

And by the way, is this (screen shot) correct way to get DSDT working?

origin_Leegenux.zip

Send me iMac_Leegenux.zip

Screen Shot 2018-11-18 at 4.45.35 PM.png

Yes

u have a fullç dsdt patched, i just patched again with some news patches

DSDT.aml.zip

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By glasgood
      CLOVER DUAL BOOT MOJAVE & WINDOWS 10 GUIDE 
       

       
       
      INCLUDES  MBR / LEGACY BIOS  TO  GPT / EFI CONVERSION
      USING MBR2GPT TOOL
       
       
      PREREQUISITE: Two physical discs ( SSD’s or HDD’s )
       
       
       
       
       
      STEP 1 - Clover dual boot configuration 
       
      Open config.plist with Clover Configurator
       
      Boot
       Legacy = PBR Timeout = True ( will remove the Timeout countdown, from Clover boot menu)  

       
      GUI 
      Scan / Custom
       Entries = True  Tool = True  Legacy = False ( removes extra Windows 10 entries )  
      Hide Volume
      - Preboot ( macOS Preboot )
      - Recovery ( macOS Recovery )
       

       
      So at boot you will have two options: boot macOS Mojave or Windows 10 
       
       
       
       
       
       
       
      ————————————————————
       
       
      STEP 2 - Using a drive without Windows 10 installed
       
      Disconnect system drive that contains your macOS Mojave install from computer ( This is so that Windows does not overwrite existing macOS Mojave boot loader )
       
      Proceed with a Windows 10 UEFI install.  
      After installation reconnect macOS Mojave Drive, the Windows installation should now be detected and usable in Clover. 
      If Windows 10 is not detected or able to boot,  then verify you installed Windows 10 as UEFI and not MBR ---->  ( Read step 2 - For a drive with Windows 10 installed )
       
       
      OR
       
       
       
      STEP 2 - Using a drive with Windows 10 already installed
       
      Verify your Windows install is  GPT / UEFI or MBR / Legacy BIOS.   
      If Windows install is GPT UEFI then Windows 10 install is ready to use at Clover boot menu, you should be able to boot into Windows directly from Clover boot screen. 
       

       
       
      But if  Windows drive is detected at Clover boot screen, but when booting Windows you get a black screen with a cursor on the top left,
      then this is most likely because Windows drive is MBR ( Legacy BIOS ).  You can easily convert MBR to GPT using  Windows MBR2GPT tool ( this saves hours work having to reinstall Windows 10 and setting up all your applications again  ) 
       
      If Windows 10 install is MBR / Legacy BIOS  then simply convert to GPT / UEFI  following instructions below ( read video summary and view video )
       
       
      ** To use Windows 10  MBR2GPT tool  you must have Windows 10 version 1703 ( creators update  ) or later and less than 3 partitions on 
      the Windows 10 drive **
       
      Video summary:
       
      Confirm Windows 10 drive is MBR Legacy BIOS ( in Windows Disk Management ) Reboot into Windows PE ( Advanced Startup ) Convert from MBR Legacy BIOS to GPT UEFI ( using commands below ) mbr2gpt /validate mbr2gpt /convert Restart Verify Windows 10 drive has changed to GPT UEFI ( in Windows Disk Management )  
       
       
       
      After conversion Windows 10 is ready to use at the Clover boot menu 
       
       
    • By SepehrM
      I'm trying to install High Sierra 10.13.3 on an ASUS N552VW laptop, and I get stuck after this message:
      "could not recover SATA HDD after 5 attempts, terminating" 
      And some other warnings afterwards.
      Specs:
      CPU: Intel Skylake 6700HQ 2.6GHz
      RAM: 16GB DDR4
      2TB HDD + 128GB SSD
      GPU: Intel HD Graphics 530 + Nvidia GTX960m
      I'm installing using a 16GB USB3 flash drive on one of HDD volumes (UEFI Mode)
       
      I uploaded the verbose log and clover config.plist
      config-new.plist

    • By gk12345
      hello to everyone, i managed to install mojave on my asus ux303ub with i5 cpu and now sleep does not work when i press sleep display turns black and pc stays on and then i have to force shut down by holding power button in order to restart pc ,by the way i used the clover folder from a guide on the internet, any help would be appreciated, thanks
    • By Bahaa
      Need help here
      My graphic card is detached 7mb
      and I try a lot of solution and no one work 
      can any one help
       

    • By Gracie
      Hello, insanely kind people! 
      I had full working Speedstep on my system with El Capitan, but after installing Mojave i cant make it working again!
      Help me please. Actually system is working only with NullCPUPowerManagement.kext. As soon as i remove it from Extensions directory i've got kernel panic at the boot.
      I tried to put SSDT.aml from my previous ElCapitan clover, tried to make new by different utilities, but still no luck.

      My system is:
      Pentium G3258
      Asus Z97-K USB 3.1
      Nvidia GTX 670


      i''m attaching my new clover.plist of Mojave and old El Capitan one, which makes Speedstep fully working and overclocking my little Pentium from 3.2 to 4.5GHz. Now i see huge speed loss without SpeedStep on Mojave  Please help, anybody! Also im attaching my working SSDT.aml from El Capitan.
      El Capitan SSDT.aml
      El Capitan config.plist
      Mojave config.plist
×