Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

4,890 posts in this topic

Recommended Posts

Advertisement
17 hours ago, MaLd0n said:

check if video work

CLOVER.zip

Nope.

I get "no signal" if platform-id 59120000 fake id 59128086

With fakeid 1912 and 3E92 and any platform-id - is loaded, but "Graphics driver failed to load: could not register with framebuffer driver".

Have a panic if platform-id 59120003.

Platform Platform-ID 3e920003 Fake ID empty - loading, but "Graphics driver failed to load: could not register with framebuffer driver".

I tried 18.1, 18.2, 18.3...

Tried BBCoffee630.kext, AppleIntelKBLGraphicsFramebufferInjector_3e9x.kext - without results. 

Send me Aleksandrs-iMac.zip

Share this post


Link to post
Share on other sites

@ Madlon

 

here is the runme zip file,

can you verify the dsdt and patch it for me?

I'm running 10,13,6 on msi z170a gaming m7 with an i5 7600k on stock (planning overclock later)

there's one 16gb memory stick and booting of an ssd

Send me Marcs-iMac.fritz.box.zip

greetings

 

Edited by josephien
donated 10$

Share this post


Link to post
Share on other sites
6 hours ago, P1aton0FF said:

Nope.

I get "no signal" if platform-id 59120000 fake id 59128086

With fakeid 1912 and 3E92 and any platform-id - is loaded, but "Graphics driver failed to load: could not register with framebuffer driver".

Have a panic if platform-id 59120003.

Platform Platform-ID 3e920003 Fake ID empty - loading, but "Graphics driver failed to load: could not register with framebuffer driver".

I tried 18.1, 18.2, 18.3...

Tried BBCoffee630.kext, AppleIntelKBLGraphicsFramebufferInjector_3e9x.kext - without results. 

Send me Aleksandrs-iMac.zip

try, put two files in clover/acpi/patched

remove all flags etc about video

Arquivo Comprimido.zip

24 minutes ago, josephien said:

@ Madlon

 

here is the runme zip file,

can you verify the dsdt and patch it for me?

I'm running 10,13,6 on msi z170a gaming m7 with an i5 7600k on stock (planning overclock later)

there's one 16gb memory stick and booting of an ssd

Send me Marcs-iMac.fritz.box.zip

greetings

 

DSDT.aml.zip

Share this post


Link to post
Share on other sites
5 hours ago, fryysyd said:

@MaLd0n

 

Send me iMac.zip

 

Hello, moderator, dsdt can also add SSD, HDD and wireless network card information, thank you very much!

u have a very wrong config

DSDT.aml.zip

 

use

 

change EC0 to EC
4543305f
45435f5f

change GFX0 to IGPU
47465830 
49475055 

change HDAS to HDEF
48444153 
48444546 

change HECI to IMEI
48454349 
494d4549 

change SAT0 to SATA
53415430 
53415441 

change GLAN to GIGE
474c414e
47494745

Share this post


Link to post
Share on other sites

 in the recent past (sierra onwards) I was forced to use F6 bios, even making sure to hex edit my mac address in!  No matter what I tried couldn't boot without F6 bios.  it would be fine if it wasn't so prone to BOOT entry issues etc....

 

I saw your thread method, and wanted to give it a try..Im booting into Mojave and High Sierra (albeit in safe mode) using newest BIOS! I  just need a little help getting DSDT patched.  I ran the sendme.app and my hardware info is below.  Hope this is sufficient if not I will add anything else I may need.  Sincere thanks for any help I may receive! 

=====================================

 

HW SPECS:

Motherboard: Gigabyte Z170XPSLI rev1.0

firmware: newest (22f)

cpu: Intel i5 6500 3.2ghz --> ssdtprgen.sh generated ssdt.aml attatched

GFX: NVIDIA GTX1060 6gb / edit:  no longer worried about intelHD gfx

misc:

USB-inject 100 series: I have already made a custom patched USB-inject ssdt that I use with usb-inject-all.kext I can attach that as well. (SSDT-UIAC.aml)

 

Not sure what the most efficient setup is for me anymore so at the very least a customized DSDT and any important flags / patches / settings for clover that will probably go a long way for me.  Thanks again for any help!

 

ssdt.aml

SSDT-UIAC.aml

Send me Carloss-iMac.zip

Edited by macw00t
edit..figured out some things and have decided I only need to try and create a custom DSDT for my needs, focusing on 10.13.6. also edited for brevity, readability etc

Share this post


Link to post
Share on other sites

Hi, need bit help or pointing into the right direction. I'm trying patch Lenovo 720 battery and seems suitable patch is already available for Lenovo 480, seems exactly the same bits 16 and 32.

After patching DSDT i'm getting errors, can't compile. Another problem is nvram, brightness is always after reboot 3/4 of max. Tried Aptiomemorifix and now Aptiofixdrv + emuvariable, deleted early nvram.plist , but still the same, always 3/4 of brightness. Attached clover folder, ioreg and lenovo480_patch for the battery. Help appreciated.

Hardware:

Lenovo 720

i5-7200

8 gb ram

256gb nvme ssd

HD620, 1080p

Sierra 10.12.6.

files.zip

Share this post


Link to post
Share on other sites
9 hours ago, macw00t said:

 in the recent past (sierra onwards) I was forced to use F6 bios, even making sure to hex edit my mac address in!  No matter what I tried couldn't boot without F6 bios.  it would be fine if it wasn't so prone to BOOT entry issues etc....

 

I saw your thread method, and wanted to give it a try..Im booting into Mojave and High Sierra (albeit in safe mode) using newest BIOS! I  just need a little help getting DSDT patched.  I ran the sendme.app and my hardware info is below.  Hope this is sufficient if not I will add anything else I may need.  Sincere thanks for any help I may receive! 

=====================================

 

HW SPECS:

Motherboard: Gigabyte Z170XPSLI rev1.0

firmware: newest (22f)

cpu: Intel i5 6500 3.2ghz --> ssdtprgen.sh generated ssdt.aml attatched

GFX: NVIDIA GTX1060 6gb / edit:  no longer worried about intelHD gfx

misc:

USB-inject 100 series: I have already made a custom patched USB-inject ssdt that I use with usb-inject-all.kext I can attach that as well. (SSDT-UIAC.aml)

 

Not sure what the most efficient setup is for me anymore so at the very least a customized DSDT and any important flags / patches / settings for clover that will probably go a long way for me.  Thanks again for any help!

 

ssdt.aml

SSDT-UIAC.aml

Send me Carloss-iMac.zip

CLOVER.zip

Share this post


Link to post
Share on other sites
3 hours ago, striimer said:

Hi, need bit help or pointing into the right direction. I'm trying patch Lenovo 720 battery and seems suitable patch is already available for Lenovo 480, seems exactly the same bits 16 and 32.

After patching DSDT i'm getting errors, can't compile. Another problem is nvram, brightness is always after reboot 3/4 of max. Tried Aptiomemorifix and now Aptiofixdrv + emuvariable, deleted early nvram.plist , but still the same, always 3/4 of brightness. Attached clover folder, ioreg and lenovo480_patch for the battery. Help appreciated.

Hardware:

Lenovo 720

i5-7200

8 gb ram

256gb nvme ssd

HD620, 1080p

Sierra 10.12.6.

files.zip

DSDT.aml.zip

apple battery patch manual way ;) 

Share this post


Link to post
Share on other sites
5 hours ago, MaLd0n said:

DSDT.aml.zip

apple battery patch manual way ;) 

Attached dsdt did not cure the battery percentage, it's still "X" on titlebar.

When i use my DSDT (not battery patched), then at least charging status was recognised, if AC adapter plugged or not, took 2 screenshots. When i'm using MaLd0n patched DSDT, battery status and charging status are unknown, took third screenshot.

Screen Shot 2018-08-25 at 11.38.08.png

Screen Shot 2018-08-25 at 11.39.35.png

Screen Shot 2018-08-25 at 11.59.20.png

Edited by striimer

Share this post


Link to post
Share on other sites
6 hours ago, MaLd0n said:

apply a battery patch, have a guide for it, RM made a good guide

Seems not easy, i'll better donate, can you patch the dsdt ?

Edited by striimer

Share this post


Link to post
Share on other sites
18 hours ago, MaLd0n said:

 

Just a quick reply to say its working great!  Many Thanks for the help; your modern install method(s) are the top tier especially for us scrub hackintoshers!  (Now to go help myself and see if i can learn some more and maybe try patching the raw DSDT myself to see if I can get it to match yours ;) )...Cheers!

Screen Shot 2018-08-25 at 5.18.37 PM.png

Screen Shot 2018-08-25 at 5.25.28 PM.png

Share this post


Link to post
Share on other sites
28 minutes ago, macw00t said:

 

Just a quick reply to say its working great!  Many Thanks for the help; your modern install method(s) are the top tier especially for us scrub hackintoshers!  (Now to go help myself and see if i can learn some more and maybe try patching the raw DSDT myself to see if I can get it to match yours ;) )...Cheers!

Screen Shot 2018-08-25 at 5.18.37 PM.png

Screen Shot 2018-08-25 at 5.25.28 PM.png

just enjoy!

Share this post


Link to post
Share on other sites
50 minutes ago, striimer said:

Seems not easy, i'll better donate, can you patch the dsdt ?

send me new dump with my DSDT

RunMe.app

Share this post


Link to post
Share on other sites
On 8/22/2018 at 3:29 PM, MaLd0n said:
On 8/22/2018 at 3:19 PM, Mikentosh2016 said:

I found the issue.

 

 

FireWire board failure.pdf

wow

 

Received / installed the card today and Time Machine backed 4Gb in a short time.

 

Thanks MaLd0n, for your help.

 

 

FireWire card.jpg

Edited by Mikentosh2016

Share this post


Link to post
Share on other sites
4 hours ago, Mikentosh2016 said:

wow

I spoke too soon.  I contacted OWC to determine if the RAID also experienced burned electronics but while I'm waiting for their reply, can you take another look at my Send me iMac? 

About FireWire.jpg

FireWire.JPG

5 hours ago, Mikentosh2016 said:

wow

 

And the Send me iMac

 

https://www59.zippyshare.com/v/kLIWMtS1/file.html

Share this post


Link to post
Share on other sites
On 8/24/2018 at 11:11 PM, MaLd0n said:

u have a very wrong config

DSDT.aml.zip

 

use

 

change EC0 to EC
4543305f
45435f5f

change GFX0 to IGPU
47465830 
49475055 

change HDAS to HDEF
48444153 
48444546 

change HECI to IMEI
48454349 
494d4549 

change SAT0 to SATA
53415430 
53415441 

change GLAN to GIGE
474c414e
47494745

@MaLd0n  thank you for your help! I have modified it as you said.
Config.plist. However, there is a problem with sleep awakening at present. It seems to be related to USB. I have used the USB related patch, but the problem remains. So would you like to ask if you have SSDT-UIAC.aml from ASUS ROG STRIX Z370-I GAMING?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Reel
      All work 10.10, 10.11, 10,12
      camera not work in 10.13, 10.14
      You need SwitchResX that the screen does not freeze
      Custom resolutions: Back porch - lines change to 2
      UEFI boot moded bios https://github.com/Thiblizz/l502x-modded-bios
       
      For 10.14 you need: HD3000 Fix for Mojave.zip
      Installed in S/L/E 
       
      SMBIOS: MacbookPro 8.3 or MacbookPro 9.1
       
       

       

       
       
    • By glasgood
      CLOVER DUAL BOOT MOJAVE & WINDOWS 10 GUIDE 
       

       
       
      INCLUDES  MBR / LEGACY BIOS  TO  GPT / EFI CONVERSION
      USING MBR2GPT TOOL
       
       
      PREREQUISITE: Two physical discs ( SSD’s or HDD’s )
       
       
       
       
       
      STEP 1 - Clover dual boot configuration 
       
      Open config.plist with Clover Configurator
       
      Boot
       Legacy = PBR Timeout = True ( will remove the Timeout countdown, from Clover boot menu)  

       
      GUI 
      Scan / Custom
       Entries = True  Tool = True  Legacy = False ( removes extra Windows 10 entries )  
      Hide Volume
      - Preboot ( macOS Preboot )
      - Recovery ( macOS Recovery )
       

       
      So at boot you will have two options: boot macOS Mojave or Windows 10 
       
       
       
       
       
       
       
      ————————————————————
       
       
      STEP 2 - Using a drive without Windows 10 installed
       
      Disconnect system drive that contains your macOS Mojave install from computer ( This is so that Windows does not overwrite existing macOS Mojave boot loader )
       
      Proceed with a Windows 10 UEFI install.  
      After installation reconnect macOS Mojave Drive, the Windows installation should now be detected and usable in Clover. 
      If Windows 10 is not detected or able to boot,  then verify you installed Windows 10 as UEFI and not MBR ---->  ( Read step 2 - For a drive with Windows 10 installed )
       
       
      OR
       
       
       
      STEP 2 - Using a drive with Windows 10 already installed
       
      Verify your Windows install is  GPT / UEFI or MBR / Legacy BIOS.   
      If Windows install is GPT UEFI then Windows 10 install is ready to use at Clover boot menu, you should be able to boot into Windows directly from Clover boot screen. 
       

       
       
      But if  Windows drive is detected at Clover boot screen, but when booting Windows you get a black screen with a cursor on the top left,
      then this is most likely because Windows drive is MBR ( Legacy BIOS ).  You can easily convert MBR to GPT using  Windows MBR2GPT tool ( this saves hours work having to reinstall Windows 10 and setting up all your applications again  ) 
       
      If Windows 10 install is MBR / Legacy BIOS  then simply convert to GPT / UEFI  following instructions below ( read video summary and view video )
       
       
      ** To use Windows 10  MBR2GPT tool  you must have Windows 10 version 1703 ( creators update  ) or later and less than 3 partitions on 
      the Windows 10 drive **
       
      Video summary:
       
      Confirm Windows 10 drive is MBR Legacy BIOS ( in Windows Disk Management ) Reboot into Windows PE ( Advanced Startup ) Convert from MBR Legacy BIOS to GPT UEFI ( using commands below ) mbr2gpt /validate mbr2gpt /convert Restart Verify Windows 10 drive has changed to GPT UEFI ( in Windows Disk Management )  
       
       
       
      After conversion Windows 10 is ready to use at the Clover boot menu 
       
       
    • By SepehrM
      I'm trying to install High Sierra 10.13.3 on an ASUS N552VW laptop, and I get stuck after this message:
      "could not recover SATA HDD after 5 attempts, terminating" 
      And some other warnings afterwards.
      Specs:
      CPU: Intel Skylake 6700HQ 2.6GHz
      RAM: 16GB DDR4
      2TB HDD + 128GB SSD
      GPU: Intel HD Graphics 530 + Nvidia GTX960m
      I'm installing using a 16GB USB3 flash drive on one of HDD volumes (UEFI Mode)
       
      I uploaded the verbose log and clover config.plist
      config-new.plist

    • By gk12345
      hello to everyone, i managed to install mojave on my asus ux303ub with i5 cpu and now sleep does not work when i press sleep display turns black and pc stays on and then i have to force shut down by holding power button in order to restart pc ,by the way i used the clover folder from a guide on the internet, any help would be appreciated, thanks
    • By Bahaa
      Need help here
      My graphic card is detached 7mb
      and I try a lot of solution and no one work 
      can any one help
       

×