Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

4,950 posts in this topic

Recommended Posts

@MaLd0n I found the problem but don't know how to fix it.

 

In the DSDT is HS07 USB 3.0 but its the internal port (255) for my Bluetooth Card.

Could you maybe fix this in the DSDT attached?

Don't know how to do that...

Sidequestion are all HS and SSP ports in the dsdt injected needed ?

I just use these:

 

HS1/SS1 USB 3  

HS2/SS2 USB 3

HS3/SS3 Internal (Card Reader)

HS7 - Internal (Bluetooth)

HS8 - Internal (Webcam)

 

 

 

DSDT.aml

Share this post


Link to post
Share on other sites
Advertisement
2 hours ago, MaLd0n said:

check if work

CLOVER.zip

extract new SEND_ME, but use my updated app

have a many new logs

 

It seems to go well, except for sleep. After a couple of seconds, it wakes up

 

EDIT: I've noticed that Ethernet via thunderbolt port doesn't work anymore

Send me iMac-di-Giacomo.zip

Edited by giacomoleopardo

Share this post


Link to post
Share on other sites
2 hours ago, Anonym323 said:

@MaLd0n I found the problem but don't know how to fix it.

 

In the DSDT is HS07 USB 3.0 but its the internal port (255) for my Bluetooth Card.

Could you maybe fix this in the DSDT attached?

Don't know how to do that...

Sidequestion are all HS and SSP ports in the dsdt injected needed ?

I just use these:

 

HS1/SS1 USB 3  

HS2/SS2 USB 3

HS3/SS3 Internal (Card Reader)

HS7 - Internal (Bluetooth)

HS8 - Internal (Webcam)

 

 

 

DSDT.aml

use ssdt or edit kext usbinjectall for it

Share this post


Link to post
Share on other sites
3 hours ago, giacomoleopardo said:

It seems to go well, except for sleep. After a couple of seconds, it wakes up

 

EDIT: I've noticed that Ethernet via thunderbolt port doesn't work anymore

Send me iMac-di-Giacomo.zip

DSDT.aml.zip

the lan is load, delete and creta e connection again

MaLd0n 2018-08-19 às 17.12.58.png

Share this post


Link to post
Share on other sites
18 hours ago, MaLd0n said:

DSDT.aml.zip

the lan is load, delete and creta e connection again

MaLd0n 2018-08-19 às 17.12.58.png

As a matter of fact TH-LAN works (I didn't even create a new connection, maybe was just a bad moment!).

As for sleep, now it's working and it doesn't wake instantly. The problem is that for waking it up it's necessary to press the power button. No wake from usb, or bluetooth.

Send me iMac-di-Giacomo.zip

Share this post


Link to post
Share on other sites
38 minutes ago, giacomoleopardo said:

As a matter of fact TH-LAN works (I didn't even create a new connection, maybe was just a bad moment!).

As for sleep, now it's working and it doesn't wake instantly. The problem is that for waking it up it's necessary to press the power button. No wake from usb, or bluetooth.

Send me iMac-di-Giacomo.zip

yes, the problem is it, u can try create a ssdt for usb to check if solve it

Share this post


Link to post
Share on other sites

Hello, MaLd0n!

New build..new request...

i will change the WIFI/BT card with a Broadcom BMC94352Z (DW1560), if you want to keep it in mind

 

I still have to patch the battery, in the meantime I'm waiting for your EFI

Thanx!!!

 

P.S. I had to change the dsdt to start, if you have to do it again just delete it, please remember.

 

18088 Method (_LID, 0, NotSerialized) // _LID: Lid Status                 {                     Return (ECR2 (RefOf (LSTE)))

Send me MBP-di-FedeV.station.zip

Share this post


Link to post
Share on other sites
On 8/18/2018 at 11:58 PM, MaLd0n said:

DSDT.aml.zip

Thank you.

 

There seems to be a change but correctly identified FireWire is still not showing up on desktop.  Monitor going black and screen flicker.  Will restart a few more times.  The FireWire drive remains on but the computer stays down after shutdown.

 

 

Send me iMac.zip

 

 

Firewire.jpg

Edited by Mikentosh2016

Share this post


Link to post
Share on other sites
1 hour ago, gigibatt said:

Hello, MaLd0n!

New build..new request...

i will change the WIFI/BT card with a Broadcom BMC94352Z (DW1560), if you want to keep it in mind

 

I still have to patch the battery, in the meantime I'm waiting for your EFI

Thanx!!!

 

P.S. I had to change the dsdt to start, if you have to do it again just delete it, please remember.

 

18088 Method (_LID, 0, NotSerialized) // _LID: Lid Status                 {                     Return (ECR2 (RefOf (LSTE)))

Send me MBP-di-FedeV.station.zip

CLOVER.zip

1 hour ago, Mikentosh2016 said:

Thank you.

 

There seems to be a change but correctly identified FireWire is still not showing up on desktop.  Monitor going black and screen flicker.  Will restart a few more times.  The FireWire drive remains on but the computer stays down after shutdown.

 

 

Send me iMac.zip

 

 

Firewire.jpg

DSDT.aml.zip

Share this post


Link to post
Share on other sites

@MaLd0n Hey there!
I have most of the things working except for sleep/wake. When I wake from sleep the hackintosh lags and is unresponsive. I really need this stuff working, will be grateful if You could help me with this.

CPU: Ivy Bridge i5 3570k @4300MHz, HD4000 iGPU
MB: MSI Z77a-G43
RAM: 12GB 1333MHz
GPU: Radeon HD7950 3Gb
WIFI: BCM943602CS with BT

AUDIO: ALC892
ETH: RTL8111
Bios multi-monitor enabled 128mb.

 

If you need any more info feel free to ask.
 

Send me iMac-Przemysaw.zip

Edited by Szefo09

Share this post


Link to post
Share on other sites

Hello!

Can me somebody help.

Not a system with SSD runs only works with USB.

Intel UHD 630 has 7 mb, BT is not working, no sound...

My system is i5 8600t, Asus H310t, Samsung 970Pro, DW1830.

Thank you very much!

 

Send me Aleksandrs-iMac.zip

Edited by P1aton0FF

Share this post


Link to post
Share on other sites
On 8/20/2018 at 8:35 PM, MaLd0n said:

 

FANTASTIC!

 

without SSDT-3 goes into the Panic kernel, is this normal?

Now I've created and inserted it, now everything seems to go, can you check? It gives me an error in the kernel log

Please check if you find any error/things that can be improved

Thanks again maldon!

Send me MacBook-Pro-2.station.zip

 

 

IF I BOOT WITH EXTERNAL MONITOR CONNECTED THE MAIN SCREEN GO TO BLACK...how to solve?

 

@MaLd0n

Edited by gigibatt
any reply.....

Share this post


Link to post
Share on other sites

Hello MaLd0n,

 

Can you pls help to have a look at my system? 

 

My Specs are listed below, 

 

OSX 10.13.3

Intel Core i7 8700K

Gigabyte Z370 Gaming 5 (BIOS I believe is F6)

Corsair 32GB (2 x 16GB) @ 3000mhz

Samsung SSD 960 EVO 1TB 1.00 TB

Samsung SSD 850 EVO 500GB 500 GB

Samsung SSD 850 EVO 250GB 250 GB

WDC WD30EZRZ-00GXCB0 3.00 TB

Gigabyte Alpine Ridge Dual Thunderbolt 3 

 

I'm actually having some problems with my machine, as screen freeze will occur during operation, usually starting an app or a plugin. Mac seems to be operating, the mouse cursor moves but screen would not move. Today I just realised that my OSX SSD is was notTRIM enabled, so I've now enabled it. Could this have been the issue? 

 

Also do you know how I would I go about mounting my Recovery SSD? Yesterday I tried updating my OSX to 10.13.6, but I was unable to boot, the system would just keep restarting at the APPLE logo ( boot loop ). Then I had to go back to 10.13.3 via Time Machine & now the recovery mount is not showing on the Clover Boot menu.

 

Would really appreciate it if you could help me resolve my issues. I'm quite new to Hackintosh, as this is the first system I've built. 

 

MANY THANKS!

 

PS Just made a small donation via paypal with acc ending with @163.com . 

 

 

 

Send me z370 gaming 5.zip

Edited by jazztronaut

Share this post


Link to post
Share on other sites
11 hours ago, Szefo09 said:

@MaLd0n Hey there!
I have most of the things working except for sleep/wake. When I wake from sleep the hackintosh lags and is unresponsive. I really need this stuff working, will be grateful if You could help me with this.

CPU: Ivy Bridge i5 3570k @4300MHz, HD4000 iGPU
MB: MSI Z77a-G43
RAM: 12GB 1333MHz
GPU: Radeon HD7950 3Gb
WIFI: BCM943602CS with BT

AUDIO: ALC892
ETH: RTL8111
Bios multi-monitor enabled 128mb.

 

If you need any more info feel free to ask.
 

Send me iMac-Przemysaw.zip

CLOVER.zip

Share this post


Link to post
Share on other sites
10 hours ago, blackriderz.id said:

Hey @MaLd0n,

I have successfully installed the High Sierra in my Laptop : Asus ROG GL553VW almost everything is fine except the touchpad and i always need add boot args cpus=1 , DVMT Preallocated already set to 64MB.

 

I am really grateful if you could help me with this problems.

Send me Billys-MBP.lan.zip

 

Thank you,

ur config is very wrong, check it

DSDT.aml.zip

 

for avoid cpus=1, check if work

VoodooTSCSync.kext.zip

Share this post


Link to post
Share on other sites
6 hours ago, P1aton0FF said:

Hello!

Can me somebody help.

Not a system with SSD runs only works with USB.

Intel UHD 630 has 7 mb, BT is not working, no sound...

My system is i5 8600t, Asus H310t, Samsung 970Pro, DW1830.

Thank you very much!

 

Send me Aleksandrs-iMac.zip

CLOVER.zip

5 hours ago, gigibatt said:

 

FANTASTIC!

 

without SSDT-3 goes into the Panic kernel, is this normal?

Now I've created and inserted it, now everything seems to go, can you check? It gives me an error in the kernel log

Please check if you find any error/things that can be improved

Thanks again maldon!

Send me MacBook-Pro-2.station.zip

 

 

IF I BOOT WITH EXTERNAL MONITOR CONNECTED THE MAIN SCREEN GO TO BLACK...how to solve?

looks good, the log is about battery kext

 

check here, same procedure

 

Share this post


Link to post
Share on other sites
4 hours ago, jazztronaut said:

Hello MaLd0n,

 

Can you pls help to have a look at my system? 

 

My Specs are listed below, 

 

OSX 10.13.3

Intel Core i7 8700K

Gigabyte Z370 Gaming 5 (BIOS I believe is F6)

Corsair 32GB (2 x 16GB) @ 3000mhz

Samsung SSD 960 EVO 1TB 1.00 TB

Samsung SSD 850 EVO 500GB 500 GB

Samsung SSD 850 EVO 250GB 250 GB

WDC WD30EZRZ-00GXCB0 3.00 TB

Gigabyte Alpine Ridge Dual Thunderbolt 3 

 

I'm actually having some problems with my machine, as screen freeze will occur during operation, usually starting an app or a plugin. Mac seems to be operating, the mouse cursor moves but screen would not move. Today I just realised that my OSX SSD is was notTRIM enabled, so I've now enabled it. Could this have been the issue? 

 

Also do you know how I would I go about mounting my Recovery SSD? Yesterday I tried updating my OSX to 10.13.6, but I was unable to boot, the system would just keep restarting at the APPLE logo ( boot loop ). Then I had to go back to 10.13.3 via Time Machine & now the recovery mount is not showing on the Clover Boot menu.

 

Would really appreciate it if you could help me resolve my issues. I'm quite new to Hackintosh, as this is the first system I've built. 

 

MANY THANKS!

 

PS Just made a small donation via paypal with acc ending with @163.com . 

 

 

 

Send me z370 gaming 5.zip

check if work good, use full clover folder

CLOVER.zip

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member

  • Similar Content

    • By mossy
      so im trying to install El Capitan on my old laptop but im having mouse issues i tried all the kext and looked online 
       
      this is TUT i followed 
       
      https://osxlatitude.com/forums/topic/8645-dell-latitude-d630-with-core2duo-and-nvidia-quadro-nvs-135m-el-capitansierra/
       
      ASUS K50IN T6500
    • By dbx103
      I Have Full and meta display, I can't control display.
      debug_27160.zip
    • By maxneko
      TLDR: I've gotten myself up a creek without even a working keyboard and mouse. 
       
      My setup
       
      Asus X99 Deluxe motherboard
      Dual Asus Radeon R9 280x GPU's
      i7 5930K CPU
      G.Skill - Ripjaws Series 32 GB (4 x 8 GB) DDR4-2400 Memory
      Highpoint 2721 RAID controller + 4 hard drives
      EVO 850 Pro SSD
      Mojave 10.14.4
      Profile: MacPro6,1
       
      I had installed Mojave and had set it up to boot directly into my user account with no need for a password. Both Clover and IORegistryExplorer were set as log-in items. This was because I was working on activating my SS ports. The X99 Deluxe USB ports are set up as follows:
       
      USB3_E1 to USB3_E10 at the rear (Asmedia controller)
      USB_13 & USB_14 at the rear (Intel)
      USB1112 & USB1314 (headers on the motherboard)
      USB3_12 & USB3_34 (front)
       
      This adds up to potentially 34 ports, far more than I need. I had three patches enabled to remove the 15 port limit but they weren't doing the trick. So I disabled the ten USB3 ports on the rear that are subject to the Asmedia controller in BIOS. I also disabled the Asmedia USB3 controller. All I really need are the four USB3 ports on the front panel, along with one of the motherboard USB2 headers. This should have gotten me down to under 15 ports. One SS port appeared in IORegistryExplorer but I couldn't locate it when I tested every active port.
       
      I'm not sure what I did but everything went sideways. I found that I was booting into Mojave, Clover and IORegistryExplorer were launching but the mouse cursor was frozen in the corner and the keyboard was dead. Moving the keyboard and mouse to different ports didn't help. Meanwhile the OS was giving me a message about looking for a BT keyboard which I don't have. 
       
      I've tried the following to no avail:
       
      -- reinstalling Mojave
      -- various combinations of USBInjectAll.kext, XHCI-X99-injector.kext, X99_Injector USB 3.kext, and GenericUSBXHCI.kext
      -- resetting the CMOS
      -- enabling and disabling the ten Asmedia USB3 ports on the rear
      -- enabling and disabling the port limit patches below:
       

       

       
      I haven't reflashed my BIOS which is something I do when starting from scratch, although I don't see why it would matter. I'm open to that, burning incense, whatever will help.  In the end, I need at least 1-2 working USB3 ports. But right now, I just need to get my keyboard and mouse working again. I've been going in circles on this all day and could really use some good ideas.
       
      Thanks so much.
       
      Max
       
      config copy.plist
    • By dbx103
      I have been trying to get the backlight to work please help.
      debug_7898.zip
    • By mossy
      Hi i have old laptop and i wanted to install os x i looked online for some TUT's but i didnt understand some people say works some say no 
       
      i being trying all day boots me to install menu for sierra but i cant move the mouse or the keyboard so can some plz help me 
       
      ASUS K50IN Intel® Core™2 Duo Processor T6500 2.10 GHz
       
      NVIDIA® GeForce® G102M, with 512MB VRAM
       
       
×