Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

4,890 posts in this topic

Recommended Posts

On 8/10/2018 at 9:38 PM, MaLd0n said:

CLOVER.zip

USE last clover version

Thank you! This wouldn't boot on my machine despite adding some boot flags that maybe you had already incorporated in the ddst, but I did take some kexts from your build and various other pieces.

Anyways I got my USB working and things are generally functioning well except my system is not stable and I get kernal panics every 30 minutes or so. Typically while using chrome or rendering using CUDA. 

 

I'm attaching a new Send ME file and my KP log. Hopeful there's a simple solution here!

Send me Bartholmews-iMac.zip

KernalPanic.txt

Share this post


Link to post
Share on other sites
Advertisement

MaLd0n,

 

Few weeks back you made a DSDT for my Hackintosh, but sometimes it doesn't boot after a few reboots it wil boot into MacOS and everything is super! only when i reboot it hangs, could you take another look for me ?

 

 

Send me Damons-iMac.zip

55594806495__8B447882-B780-455E-BD73-CCB703C79D0D copy.jpg

Share this post


Link to post
Share on other sites
3 hours ago, JoeBlack2k said:

MaLd0n,

 

Few weeks back you made a DSDT for my Hackintosh, but sometimes it doesn't boot after a few reboots it wil boot into MacOS and everything is super! only when i reboot it hangs, could you take another look for me ?

 

 

Send me Damons-iMac.zip

55594806495__8B447882-B780-455E-BD73-CCB703C79D0D copy.jpg

U use my very old dsdt, bios version is very old

Share this post


Link to post
Share on other sites

instala a fakepciid intel hdmi audio tb, remove o _dsm do device hdef no dsdt e vai testando os ids via clover

Share this post


Link to post
Share on other sites
3 minutes ago, MaLd0n said:

instala a fakepciid intel hdmi audio tb, remove o _dsm do device hdef no dsdt e vai testando os ids via clover

quando tu diz remover o _dsm é remover a seleção? 

image.png

Share this post


Link to post
Share on other sites
44 minutes ago, MaLd0n said:

sim

 

remove, compila e injeta id via clover

é normal ele sumir até achar o id inject certo? image.thumb.png.f93211faec24f9df135ef2a9f21d2d56.png

 

Cara testei todas as ids ( 1, 2, 5, 7, 11 e 13 ) e nada! :/

Edited by kevinagnes

Share this post


Link to post
Share on other sites

vc removeu o dsm, vai sumir a parte cosmética tb, veja qual id funciona e depois a gente aplica

Share this post


Link to post
Share on other sites

OWC's External FireWire RAID backup has not backed up since July 21st.  Initially, System Preferences indicated that the FireWire Bus was "not recognized", I think.  Now it indicates: Maximum Speed: Up to 800 Mb/sec.  The external drive does cycle on/off when I connect/disconnect the FireWire cable but it doesn't mount.  Selecting FixFireWire in Clover causes my machine to not boot.  I fear updating Security Update 2018-004 10.12.3 due to causing more issues as the last time I attempted to update.  I have opened Clover Configurator once since MaLd0n got me up and running months ago.

Share this post


Link to post
Share on other sites
8 hours ago, MaLd0n said:

vc removeu o dsm, vai sumir a parte cosmética tb, veja qual id funciona e depois a gente aplica

como eu sei que o id funciona? deve o audio funcionar? devo ver ele no PCI? pq testei os layouts (1, 2, 5, 7, 11 e 13) e nada aparente mudou!

Share this post


Link to post
Share on other sites
9 hours ago, Mikentosh2016 said:

OWC's External FireWire RAID backup has not backed up since July 21st.  Initially, System Preferences indicated that the FireWire Bus was "not recognized", I think.  Now it indicates: Maximum Speed: Up to 800 Mb/sec.  The external drive does cycle on/off when I connect/disconnect the FireWire cable but it doesn't mount.  Selecting FixFireWire in Clover causes my machine to not boot.  I fear updating Security Update 2018-004 10.12.3 due to causing more issues as the last time I attempted to update.  I have opened Clover Configurator once since MaLd0n got me up and running months ago.

u need post files

1 hour ago, kevinagnes said:

como eu sei que o id funciona? deve o audio funcionar? devo ver ele no PCI? pq testei os layouts (1, 2, 5, 7, 11 e 13) e nada aparente mudou!

https://youtu.be/w0YX1a-1aa0?t=309

Share this post


Link to post
Share on other sites

@MaLd0n eu sei quais ids que o meu codec usa. Só não entendi como eu sei que deu certo, entende? Por que eu testei via clover os ids e não apareceu o "driver" no PCI. Já vi o teu video no youtube, testei os metodos mas nada até agora realmente funcionou. O unico metodo que o driver apareceu no PCI foi com o _DSM na DSDT (cosmético) mas ele também não me deu audio. 

Share this post


Link to post
Share on other sites

MaLd0n hello! Could you help to understand the problem: the system works, in principle, everything is fine, but if you monitor the readings of sensors in the program iStat Menu, then the HD630 displays everything except the processor, it turns out that it does not seem to work, but you should enter the system into sleep and After getting out of sleep, the processor starts showing changes to the HD630! What could be the reason??1375777222_2018-08-1722_03_32.png.620fcea5ad0444da059a49c6e93cfec9.png

Share this post


Link to post
Share on other sites

Lenovo G570-20079
i5-2450M Sandy Bridge
AMD REDEON HD 6370M+INtel HD 3000
LAN AR8152
WIFI AR9285
AUDIO CX20059 
HM65

please clover and config singla USB not UEFI yes signal legacy error kernel panic 

Share this post


Link to post
Share on other sites
5 hours ago, MaLd0n said:

u need post files

 

Also, it sometimes starts by itself after hours of being off.

Send me iMac.zip

Share this post


Link to post
Share on other sites
9 hours ago, kevinagnes said:

@MaLd0n eu sei quais ids que o meu codec usa. Só não entendi como eu sei que deu certo, entende? Por que eu testei via clover os ids e não apareceu o "driver" no PCI. Já vi o teu video no youtube, testei os metodos mas nada até agora realmente funcionou. O unico metodo que o driver apareceu no PCI foi com o _DSM na DSDT (cosmético) mas ele também não me deu audio. 

sim, só aparece lá por causa do _DSM que tem o cosmético, o patch do clover via config.plist não tem o cosmético

4 hours ago, alex9440 said:

MaLd0n hello! Could you help to understand the problem: the system works, in principle, everything is fine, but if you monitor the readings of sensors in the program iStat Menu, then the HD630 displays everything except the processor, it turns out that it does not seem to work, but you should enter the system into sleep and After getting out of sleep, the processor starts showing changes to the HD630! What could be the reason??1375777222_2018-08-1722_03_32.png.620fcea5ad0444da059a49c6e93cfec9.png

i don't use sensors, i use only intel power gadget

 

3 hours ago, Mikentosh2016 said:

 

Also, it sometimes starts by itself after hours of being off.

Send me iMac.zip

extract untouched tables with F4 key

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Gracie
      Hello, insanely kind people! 
      I had full working Speedstep on my system with El Capitan, but after installing Mojave i cant make it working again!
      Help me please. Actually system is working only with NullCPUPowerManagement.kext. As soon as i remove it from Extensions directory i've got kernel panic at the boot.
      I tried to put SSDT.aml from my previous ElCapitan clover, tried to make new by different utilities, but still no luck.

      My system is:
      Pentium G3258
      Asus Z97-K USB 3.1
      Nvidia GTX 670


      i''m attaching my new clover.plist of Mojave and old El Capitan one, which makes Speedstep fully working and overclocking my little Pentium from 3.2 to 4.5GHz. Now i see huge speed loss without SpeedStep on Mojave  Please help, anybody! Also im attaching my working SSDT.aml from El Capitan.
      El Capitan SSDT.aml
      El Capitan config.plist
      Mojave config.plist
    • By guitar201
      I’m currently getting around 30seconds on the brucex test and think I can do better.   Ive tried disabling dgpu in the bios and enabled to no availe.  Currently running 10.14.3 with corps dsdt script.  
       
      System is a:
       
      ​
       
      Core i5-8400 / Gigabyte Z370 SLI XP mobo
       
       
      Vega 64
       
       
      GC-Alpine Ridge Thunderbolt 3 card
       
       
      [https://pastebin.com/W3PVZCxh](https://pastebin.com/W3PVZCxh) My Config.plist
       
       
       
      [https://imgur.com/a/KZ9qgop](https://imgur.com/a/KZ9qgop) Contents of my EFI folder
       
      Any suggestions is appreciated.  Thanks. 
    • By End3rPower50
      Hi, is Qualcomm Atheros AR956x compatible with MacOS Mojave 10.14.3?
    • By SIGNALSOUT
      Hello,
      I don't have access to another Mac, so I downloaded the following files:
       
      InstallESDDmg.pkg
      InstallAssistantAuto.dmg
      RecoveryHDMetaDmg.pkg
       
      Build is 10.14.3
       
      These were direct downloads from Apple Servers. If I extract them all I can build a Install macOS Mojave.app from them. I have tried various things in order to get the Mojave Patcher to accept the .app but I cannot get it to boot. The USB key it creates doesn't look proper as some of the files end up on the root of the disk, such as Base. and when it's finished flashing it changes the usb key's name to OS X Base.
       
      Could someone be of assistance and provide me with a tree print out of the file structure for Install macOS Mojave.app please?
      Thank you,
      Nate
    • By Leinad12
      Olá a todos.
      Estou com o macOS Mojave instalado num Lenovo 305 (com um i3 5005 e uma HD 5500) porém tou com um problema.
      Sempre que o computador entra em pausa (Sleep) não consigo voltar a "acordar" (Wake).
      Alguém pode me ajudar pf?
×