Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

4,950 posts in this topic

Recommended Posts

1 hour ago, BackwardMac said:

Ok so, it works really better, sleep, restart, shutdown working well.

If I understand well, I can't use aptioMemoryFix yet and I need to stay with EmuVariable and OsxAptioFix. Any idea why?

 

I notice that my Intel UHD 630 appear as firewire like few month ago, can you just change that?

I also notice some ACPI error in kernel log, like CNDP, HDEF, PXSX, is it ok to let this?

 

after those two things the mobo will be fully functional :thumbsup_anim:

 

thanks a lot men!

Screen Shot 2018-08-11 at 02.27.20.png

Send me MacProPierre.zip

Screen Shot 2018-08-11 at 02.41.30.png

all errors in OEM SSDTs

replace full folder

patched.zip

 

uncheck PluginType in config.plist, u don't need it

 

Check

 

 

Share this post


Link to post
Share on other sites
Advertisement
46 minutes ago, jacobk said:

Hey - I have a new x299 build that I cannot get USB 3 working on. I ran your "Run me" app and have generated those files. I'm sure you'll be able to see but it's a 7940x in an x299 designare.

I've done a custom ioReg USB port patch and that did not solve anything although the kext patch did "work" and it relabeled my USB ports in IOReg. Anyways I would be really happy if you could help me out with this one.

 

Send me Bartholmews-iMac.zip

CLOVER.zip

USE last clover version

Share this post


Link to post
Share on other sites
On 8/9/2018 at 7:47 PM, MaLd0n said:

Ok thanc Maldon for your hard work. The notebook is fine!

The only last question for You is: my external monitor is plugget on the only hdmi but System Profiler show this like DP port. I tried to patch the framebuffer but it doens't work, how to?

debug_20848.zip

Edited by gigibatt

Share this post


Link to post
Share on other sites
6 hours ago, JoeBlack2k said:

Dear Mister MaLd0n,

 

could you please look at my hackintosh and make a dsdt for it ? I would really appreciate it :) thanks!!

Send me iMacs-iMac.zip

use updated app

http://olarila.com/files/Utils/RunMe.app.zip

6 hours ago, gigibatt said:

Ok thanc Maldon for your hard work. The notebook is fine!

The only last question for You is: my external monitor is plugget on the only hdmi but System Profiler show this like DP port. I tried to patch the framebuffer but it doens't work, how to?

debug_20848.zip

check here a @Hervé explanation, i think work for u

https://www.insanelymac.com/forum/topic/324503-dual-screen-not-working/?do=findComment&comment=2445773

Share this post


Link to post
Share on other sites
21 hours ago, MaLd0n said:

all errors in OEM SSDTs

replace full folder

patched.zip

 

uncheck PluginType in config.plist, u don't need it

 

Check

 

 

 

Thanks a lot MaLd0n,

 

After using your patched folder I still have some ACPI ISSUE essentially CNDP and sb.PCI0.RP02.PXSX.WIST

I checked your video and try to resolve the PXSX issue by deleting one line one your SSDT but without success. The issue stil here.

 

And the UHD still appear as firewire, don't know if that can be a problem.

Last time you succeed to resolve this one (few weeks ago) so I checked this old file, and compare with the new one (the 3-A-M-L) and unable to solve this too.:(

Can I ask you again some of your time to solving this?

 

Thanks a lot,

 

Screen Shot 2018-08-12 at 01.01.11.png

Send me MacProPierre.zip

Share this post


Link to post
Share on other sites
35 minutes ago, BackwardMac said:

 

Thanks a lot MaLd0n,

 

After using your patched folder I still have some ACPI ISSUE essentially CNDP and sb.PCI0.RP02.PXSX.WIST

I checked your video and try to resolve the PXSX issue by deleting one line one your SSDT but without success. The issue stil here.

 

And the UHD still appear as firewire, don't know if that can be a problem.

Last time you succeed to resolve this one (few weeks ago) so I checked this old file, and compare with the new one (the 3-A-M-L) and unable to solve this too.:(

Can I ask you again some of your time to solving this?

 

Thanks a lot,

 

Screen Shot 2018-08-12 at 01.01.11.png

Send me MacProPierre.zip

SSDT-7-A M I.aml.zip

DSDT.aml.zip

i think if fix CNDP, have a problems with usb

Share this post


Link to post
Share on other sites

Hi guys.

 

This is my rig:

  • CPU: i770k
  • GPU: AORUS GeForce GTX 1080 Ti Xtreme Edition
  • MOBO: GA-Z270X-Gaming 7 
  • SSD: Samsung 960 EVO 500GB m.2 NVeMe

I had a working hackintosh for about a year (THANK YOU TO MaLd0n!!). Then I was stupid, and clicked "update OS" without reading up on any preparation. Now my Hackintosh no longer boots :(

 

I read it might be because of the new APFS SSD format or something, so I tried a couple of things to fix that but it's not working. 

 

What do you think I should try?

Share this post


Link to post
Share on other sites
Just now, BackwardMac said:

 

Should I use just the DSDT and SSDT 7 or I use the 3, and 5 also?

Thank you.

don't remove any file, just replace

Share this post


Link to post
Share on other sites
29 minutes ago, BackwardMac said:

So when using DSDT,imageproxy.php?img=&key=c17464ef1b1b51c7imageproxy.php?img=&key=c17464ef1b1b51c7 SSDT 3, SSDT 5, SSDT 7, my GT 740 is not working/not recognise..

Screen Shot 2018-08-12 at 04.45.00.png

Screen Shot 2018-08-12 at 04.28.34.png

Send me MacProPierre.zip

macpro5 for coffeelake? PluginType in config.plist?

22 minutes ago, vikas027 said:

Hey guys,

 

What about WiFi and Bluetooth? Did you had to use a wireless adapter like TP Link for WiFi and a Bluetooth adapter? 

WDN4800 don't have BT

Share this post


Link to post
Share on other sites
15 hours ago, MaLd0n said:

press barspace in clover boot screen. block kexts and block Lilu.kext, update all kexts

 

How do I specifically block Lilu.kext?

 

I can't update my kexts on my EFI partition because I can't boot into Mac OS to mount the EFI partition to update it. 

 

Without blocking Lilu.kext and without updating my kexts, if I press spacebar and select "Boot macOS without injected kexts", I get the apple icon and the loading bar for a long time, and then I get the white circle/slash: (/)

 

I tried to boot from USB, and got the error "This version of Mac OS X is not supported on this platform!"

 

 

Screen Shot 2018-08-12 at 12.30.05.png

Screen Shot 2018-08-12 at 12.25.11.png

 .png

Share this post


Link to post
Share on other sites
7 hours ago, humphreygo said:

@MaLd0ncan you help me to fix uhd630? 

sys is 10.13.6,only 7MB in use, bios set to 128MB,

I'm poor in English ,sorry and thanks

Send me humphreygos-iMac.zip

Arquivo Comprimido.zip

5 hours ago, dellala said:

 

How do I specifically block Lilu.kext?

 

I can't update my kexts on my EFI partition because I can't boot into Mac OS to mount the EFI partition to update it. 

 

Without blocking Lilu.kext and without updating my kexts, if I press spacebar and select "Boot macOS without injected kexts", I get the apple icon and the loading bar for a long time, and then I get the white circle/slash: (/)

 

I tried to boot from USB, and got the error "This version of Mac OS X is not supported on this platform!"

 

 

Screen Shot 2018-08-12 at 12.30.05.png

Screen Shot 2018-08-12 at 12.25.11.png

 .png

use -no_compat_check bootargs

Share this post


Link to post
Share on other sites
25 minutes ago, MaLd0n said:

Arquivo Comprimido.zip

use -no_compat_check bootargs

Hey MaLd0n. Good news, I got advice from someone on how to just update lilu.kext and now it booted to this screen. What do I do next? I read somewhere that I should use Terminal somehow to make sure my drive stays formatted as HFS. Should I do that, or is it too late? 

 

 

Screen Shot 2018-08-12 at 17.59.07.png

Share this post


Link to post
Share on other sites
3 hours ago, dellala said:

 Hey MaLd0n. Good news, I got advice from someone on how to just update lilu.kext and now it booted to this screen. What do I do next? I read somewhere that I should use Terminal somehow to make sure my drive stays formatted as HFS. Should I do that, or is it too late? 

 

 

Screen Shot 2018-08-12 at 17.59.07.png

 

I can report back that all is well! Turns out I wasn't continuing the stupid installation from before, I was booting from USB which was automatically running my initial 10.12.4 install all over again. Which I continued through, and now my hackintosh works again! yay! Now I just gotta figure out if it's worth figuring out how to upgrade from 10.12.4 to 10.13.6 :)
 

Share this post


Link to post
Share on other sites
22 minutes ago, dellala said:

 

I can report back that all is well! Turns out I wasn't continuing the stupid installation from before, I was booting from USB which was automatically running my initial 10.12.4 install all over again. Which I continued through, and now my hackintosh works again! yay! Now I just gotta figure out if it's worth figuring out how to upgrade from 10.12.4 to 10.13.6 :)
 

u can use my images, Olarila High Sierra, etc

Share this post


Link to post
Share on other sites
On 7/28/2018 at 11:49 AM, MaLd0n said:

:yoji:

Hi

I can't play DRM-protected video on iTunes. iTunes shows black screen and stops position of playing marker at '0'.

Here is my spec:

NVIDIA Geforce 1060 GTX i5 8400 + UHD 630

I have turned on iGPU + Discrete GPU setting on BIOS and seems to work on playing video using iina with hw-decoder perfectly (Imgur)
I also checked VDA Decoder if working using VDADecoderChecker and, it shows 'Intel plugin detected. HW Decoder is fully working' (Imgur)

I try to make it work with the following: I installed the kext shiki.kext (in recent, it was ported into part of WhateverGreen.kext) and set boot args with shikigva=12.
Force AppleGVA to use Intel or Nvidia decoder and reset DRM But none of them makes it to work. Is this issue relevant to DSDT? Thanks!

Edited by awert_65

Share this post


Link to post
Share on other sites
On 8/11/2018 at 7:55 PM, MaLd0n said:

Send me iMacs-iMac.zip

 

Oops! this is the good version :)

 

thank you again!

Share this post


Link to post
Share on other sites
1 hour ago, awert_65 said:

Hi

I can't play DRM-protected video on iTunes. iTunes shows black screen and stops position of playing marker at '0'.

Here is my spec:

NVIDIA Geforce 1060 GTX i5 8400 + UHD 630

I have turned on iGPU + Discrete GPU setting on BIOS and seems to work on playing video using iina with hw-decoder perfectly (Imgur)
I also checked VDA Decoder if working using VDADecoderChecker and, it shows 'Intel plugin detected. HW Decoder is fully working' (Imgur)

I try to make it work with the following: I installed the kext shiki.kext (in recent, it was ported into part of WhateverGreen.kext) and set boot args with shikigva=12.
Force AppleGVA to use Intel or Nvidia decoder and reset DRM But none of them makes it to work. Is this issue relevant to DSDT? Thanks!

try with intelgfx 59128086, ig platform id 59120003 and shikigva=60

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By maxneko
      TLDR: I've gotten myself up a creek without even a working keyboard and mouse. 
       
      My setup
       
      Asus X99 Deluxe motherboard
      Dual Asus Radeon R9 280x GPU's
      i7 5930K CPU
      G.Skill - Ripjaws Series 32 GB (4 x 8 GB) DDR4-2400 Memory
      Highpoint 2721 RAID controller + 4 hard drives
      EVO 850 Pro SSD
      Mojave 10.14.4
      Profile: MacPro6,1
       
      I had installed Mojave and had set it up to boot directly into my user account with no need for a password. Both Clover and IORegistryExplorer were set as log-in items. This was because I was working on activating my SS ports. The X99 Deluxe USB ports are set up as follows:
       
      USB3_E1 to USB3_E10 at the rear (Asmedia controller)
      USB_13 & USB_14 at the rear (Intel)
      USB1112 & USB1314 (headers on the motherboard)
      USB3_12 & USB3_34 (front)
       
      This adds up to potentially 34 ports, far more than I need. I had three patches enabled to remove the 15 port limit but they weren't doing the trick. So I disabled the ten USB3 ports on the rear that are subject to the Asmedia controller in BIOS. I also disabled the Asmedia USB3 controller. All I really need are the four USB3 ports on the front panel, along with one of the motherboard USB2 headers. This should have gotten me down to under 15 ports. One SS port appeared in IORegistryExplorer but I couldn't locate it when I tested every active port.
       
      I'm not sure what I did but everything went sideways. I found that I was booting into Mojave, Clover and IORegistryExplorer were launching but the mouse cursor was frozen in the corner and the keyboard was dead. Moving the keyboard and mouse to different ports didn't help. Meanwhile the OS was giving me a message about looking for a BT keyboard which I don't have. 
       
      I've tried the following to no avail:
       
      -- reinstalling Mojave
      -- various combinations of USBInjectAll.kext, XHCI-X99-injector.kext, X99_Injector USB 3.kext, and GenericUSBXHCI.kext
      -- resetting the CMOS
      -- enabling and disabling the ten Asmedia USB3 ports on the rear
      -- enabling and disabling the port limit patches below:
       

       

       
      I haven't reflashed my BIOS which is something I do when starting from scratch, although I don't see why it would matter. I'm open to that, burning incense, whatever will help.  In the end, I need at least 1-2 working USB3 ports. But right now, I just need to get my keyboard and mouse working again. I've been going in circles on this all day and could really use some good ideas.
       
      Thanks so much.
       
      Max
       
      config copy.plist
    • By dbx103
      I have been trying to get the backlight to work please help.
      debug_7898.zip
    • By mossy
      Hi i have old laptop and i wanted to install os x i looked online for some TUT's but i didnt understand some people say works some say no 
       
      i being trying all day boots me to install menu for sierra but i cant move the mouse or the keyboard so can some plz help me 
       
      ASUS K50IN Intel® Core™2 Duo Processor T6500 2.10 GHz
       
      NVIDIA® GeForce® G102M, with 512MB VRAM
       
       
    • By End3rPower50
      Hi, I bought a Dell DW1820A based on BCM94350ZAE
      I can't install kext for this chipset on my hackintosh
      Can anyone help me?
      Thanks in advace 
      P.S Sorry for my bad English
       
      CLOVER.zip
    • By slapbass_
      NO AUDIO/SIN SONIDO/ NO HDMI_MOJAVE 10.14.4_AYUDA POR FAVOR
       
      Hola compañeros, buen dia, espero que esten bien en todo,
       
      necesito de su ayuda por favor,
      no lógro activar el sonido de mi laptop eh aqui las especificaciones:
      Dell Inspiron 14 5000 series (5458)
       
      - Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz
      - Ram 4GB»
      - Intel HD Graphics 5500
      - Red PCI :
      Intel Dual Band Wireless-AC 3160 AC HMC WiFi Adapter
      Realtek RTL8139/810x Fast Ethernet Adapter
       
      - Audio
      Intel Broadwell HDMI @ Intel Broadwell - Mini HD Audio
       
      Realtek ALC255 @ Intel Wildcat Point-LP PCH High defi.....
       
      alguien de ustedes que pueda darme una mano para ACTIVAR y que funcione todo el sonido y hdmi de mi laptop, les estare infinitamente agradecido con ustedes...
      aqui les dejo mi EFI
      https://www4.zippyshare.com/v/eBhG3AEy/file.html
      saludos
      Dios les bendiga n.n
×