Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

4,890 posts in this topic

Recommended Posts

Advertisement
54 minutes ago, gigibatt said:

for the SMBIOS as I told you, if I use the MacBookPro 13.1 I have problems of mouse lag at boot, if I use the 13.3 okay but the HDMI output does not go and I can not use a second screen in mirror. At the moment using MacBook Pro 9.1 seems to go all. In your opinion what is better for PC performance? Considering that my processor and a skylake ... (and macbook pro 13.3 and always skylake)

mbp13,1,2 or 3, need a tests

15 minutes ago, ruki250 said:

Up

https://www.insanelymac.com/forum/topic/321872-guide-sierra-high-sierra-mojave-on-mobos-serie-100-200-300-skylake-kabylake-coffeelake-dsdt/?do=findComment&comment=2629436

Share this post


Link to post
Share on other sites

@MaLd0n I need your help on this

 

This one using an UHD 620 (0x59178086) 

 

 

Send me 5917.zip

 

I also need help on this aswell : since both files are together bigger then 10 mb I used an external link for the other one.

I hope this is ok for everyone.

 

https://www.dropbox.com/s/iqj1xqcumcfx670/Send me Dell.zip?dl=0

Edited by Anonym323

Share this post


Link to post
Share on other sites
2 hours ago, Anonym323 said:

@MaLd0n I need your help on this

 

This one using an UHD 620 (0x59178086) 

 

 

Send me 5917.zip

 

I also need help on this aswell : since both files are together bigger then 10 mb I used an external link for the other one.

I hope this is ok for everyone.

 

https://www.dropbox.com/s/iqj1xqcumcfx670/Send me Dell.zip?dl=0

8th

CLOVER.zip

ur notebook dont have a S3 state, sleep don't work i think, need add it, some week ago i made one, have a hard work

 

Dell

CLOVER.zip

Share this post


Link to post
Share on other sites
4 hours ago, Anonym323 said:

thanks for the files. 

Unfortunately I am stock with the 8th gen EFI right here 

Any Idea?

 

@MaLd0n

 

 

IMG_20180810_102405.thumb.jpg.6400f635a522d1833935b9c0372a04de.jpg

check intelgfx fake and ig-platform-id

Share this post


Link to post
Share on other sites

Dear Mald0n,

Now PowerManagement of CPU it seems to working correctly.

could be implemented a patch that remove wake from USB but without completely disable it for charging devices?

Also should I use HighCurrent in Clover?

With your DSDT(and without) I have fan speed issue on Mojave on Vega 56 Pulse.The fan will go to the desired speed but they aren't turning down until I play a video with a player like IINA Player.

Could be solved?Send me iProdiFederico.zip

Many thanks in advance

Share this post


Link to post
Share on other sites
43 minutes ago, jumper981 said:

Dear Mald0n,

Now PowerManagement of CPU it seems to working correctly.

could be implemented a patch that remove wake from USB but without completely disable it for charging devices?

Also should I use HighCurrent in Clover?

With your DSDT(and without) I have fan speed issue on Mojave on Vega 56 Pulse.The fan will go to the desired speed but they aren't turning down until I play a video with a player like IINA Player.

Could be solved?Send me iProdiFederico.zip

Many thanks in advance

have some injectors for it, check forum search

Share this post


Link to post
Share on other sites

Already tried injectors for Vega but they didn’t work,Also with custom PowerPlay Tables.

For USB how I can disable wake from USB without disable it for charging?

Should I use HighCurrent with your DSDT?

Edited by jumper981

Share this post


Link to post
Share on other sites
1 hour ago, jumper981 said:

Could you modify my DSDT removing Wake from USB without completely disable for power?

what problem u have about power? 

1 hour ago, Anonym323 said:

which can I try to add?

check here

https://www.insanelymac.com/forum/topic/334899-intel-framebuffer-patching-by-means-of-whatevergreenkext/

Share this post


Link to post
Share on other sites
12 minutes ago, MaLd0n said:

just remove _prw into device XHC

Ok, it works perfectly.

Are there some methods for reducing time for entering into sleep mode?

Share this post


Link to post
Share on other sites
9 minutes ago, jumper981 said:

Ok, it works perfectly.

Are there some methods for reducing time for entering into sleep mode?

no, u need wait 15 seconds xD

Share this post


Link to post
Share on other sites

Hello MaLd0n

 

I made an bios update which solve my issue when screen connected to DP

But the previously patch you made doesn't work anymore. so have issue with sleep, shutdown, restart.

Can you patch it for me please?

 

PS : I need to use SCM enable for my DP screen, when disable nothing work.

Thanks a lot.

Send me MacProPierre.zip

Edited by BackwardMac

Share this post


Link to post
Share on other sites
35 minutes ago, BackwardMac said:

Hello MaLd0n

 

I made an bios update which solve my issue when screen connected to DP

But the previously patch you made doesn't work anymore. so have issue with sleep, shutdown, restart.

Can you patch it for me please?

 

PS : I need to use SCM enable for my DP screen, when disable nothing work.

Thanks a lot.

Send me MacProPierre.zip

DSDT.aml.zip

Share this post


Link to post
Share on other sites
45 minutes ago, MaLd0n said:

Thanks for your quick answer. It's magic, I can finally see all device in PCI.

But there is some thing not working

 

Sleep :  not working, screen goes black, power style on and Mac is freez

Shutdown : same as sleep

Restart : long but working, can handle that.

Audio, and PCI working well. 

 

To let you know, i''m using clover 4630 and just changed ig platform and intelgfx from your config.plist to match with my video.

Hope you will be able to solved this,

 

thanks!

Send me MacProPierre.zip

Share this post


Link to post
Share on other sites
17 minutes ago, BackwardMac said:

Thanks for your quick answer. It's magic, I can finally see all device in PCI.

But there is some thing not working

 

Sleep :  not working, screen goes black, power style on and Mac is freez

Shutdown : same as sleep

Restart : long but working, can handle that.

Audio, and PCI working well. 

 

To let you know, i''m using clover 4630 and just changed ig platform and intelgfx from your config.plist to match with my video.

Hope you will be able to solved this,

 

thanks!

Send me MacProPierre.zip

replace full folder, reboot and test

drivers64UEFI.zip

Share this post


Link to post
Share on other sites
19 minutes ago, MaLd0n said:

replace full folder, reboot and test

drivers64UEFI.zip

Ok so, it works really better, sleep, restart, shutdown working well.

If I understand well, I can't use aptioMemoryFix yet and I need to stay with EmuVariable and OsxAptioFix. Any idea why?

 

I notice that my Intel UHD 630 appear as firewire like few month ago, can you just change that?

I also notice some ACPI error in kernel log, like CNDP, HDEF, PXSX, is it ok to let this?

 

after those two things the mobo will be fully functional :thumbsup_anim:

 

thanks a lot men!

Screen Shot 2018-08-11 at 02.27.20.png

Send me MacProPierre.zip

Screen Shot 2018-08-11 at 02.41.30.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fusion71au
      Making a High Sierra USB Installer Entirely From Scratch in Windows
      This is a proof of concept tutorial, to show it's possible to create a vanilla High Sierra installer, entirely from scratch, in Windows (even without App Store downloaded "Install macOS High Sierra.app" from a real Mac ).  @PikeRAlpha's link to Apple's Software Catalog provides us with all the URLs necessary to download the needed files directly from Apple instead of some dubious source from the internet...
       

      Pre-Requisites
      8GB or larger USB drive Boot Disk Utility v2.1.2017rev021b from @CVAD TransMac (free 15 day trial) Paragon Hard Disk Manager Free Download Installer Files Directly from Apple
      1)  Browse Apple's Regular Software Catalog and find the URLs to download the following 6 installer files...
      BaseSystem.dmg BaseSystem.chunklist InstallInfo.plist InstallESDDmg.pkg AppleDiagnostics.dmg AppleDiagnostics.chunklist (Hint - search page for "InstallESD" to find its URL and others nearby)

      to a folder named "SharedSupport" on your Windows NTFS drive.  A browser download manager (eg Chrono for Chrome, dTA for FireFox) is handy since InstallESD is >4GB ---> allows you to pause/resume interrupted download...

      2)  Rename InstallESDDmg.pkg to InstallESD.dmg
      3)  Edit InstallInfo.plist with WordPad/text editor to remove the chunklistURL and chunklistid keys for InstallESD, and renaming it from InstallESDDmg.pkg to InstallESD.dmg (example of edited file attached to this post)...
      Note:  You can verify the SHA1 checksum of your InstallESD.dmg and BaseSystem.dmg with the correct ones at this website.
      Boot Disk Utility to format the Installer USB and Restore OS X Base System HFS partition
      1.  Format USB with BDU & latest Clover ---> creates boot files in CLOVER partition + second FAT partition
      2.  Extract 4.hfs from \SharedSupport\BaseSystem.dmg with BDU --> save to it's local folder
      3.  Restore 4.hfs to USB second partition with BDU --->  2nd partition becomes bootable "OS X Base System"
      Paragon Hard Disk Manager to extend HFS Partition to its Full Extent
      Open Paragon Partition Manager Free and resize the second partition of the USB drive to the full size allowed.  Don't forget to apply the changes at the end...
      Transmac to Copy "SharedSupport" folder to OS X Base System
      1.  Open the TransMac program and navigate to the HFS+ Volume/Install macOS High Sierra.app/Contents folder.  Right click anywhere in the empty space on the RHS pane and select "Copy Here"...
      2.  In the next stage, select the "SharedSupport" folder we created above as the "Files and Folders to be copied to the Mac Volume"...
      Clover Settings
      Clover configuration is required now.  The default config.plist (in the Clover FAT32 partition of the USB) maybe sufficient to boot your machine if you’re lucky.  If not, look at the Clover Wiki, Clover Instructions and Clover Configuration Thread for pointers and edit /EFI/Clover/config.plist accordingly with Wordpad or Notepad.
      The location of the important configuration files for Clover are summarized below
      config.plist--->EFI/CLOVER folder DSDT.aml with or without SSDT.aml--->EFI/CLOVER/ACPI/patched (don't need one if your DSDT is auto patched by Clover in config.plist) Kexts eg FakeSMC, NullCPUPowerManagement --->EFI/CLOVER/kexts/<osx version> or /Other. NB BootDiskUtility by default already has FakeSMC.kext installed here.  You may need to add VoodooPS2Controller for your laptop keyboard/trackpad to work. If UEFI booting, you will most likely need one of the OsxAptioFixDrv-64 drivers copied from /EFI/CLOVER/drivers-off/drivers64UEFI to /EFI/CLOVER/drivers64UEFI. If you want to use the installer to run High Sierra in Windows on VMware, you can follow my guide to set up the Virtual Machine and replace Clover's default config with EFI_Clover for VMware (which is compatible to run in VMware).  In the screenshots below, I have attached the USB Installer (in this case PhysicalDrive7) to my macOS Virtual Machine.  Reboot the system to the USB installer to install High Sierra ...
      What happens if we don't have access to TransMac or Paragon Hard Disk Manager?
      Not a problem, as long as we get "OS X Base System" bootable, we can launch terminal from the Utilities Menu to copy the SharedSupport folder over to the Installer app.  In essence, we will build the full installer app = 5GB+ on the target HD eg "Macintosh HD", by copying both the "small" installer app = 15MB (on "OS X Base System") and the SharedSupport folder from the NTFS volume (mounted in this example on /Volumes/DATA)...
      -bash-3.2# cd / -bash-3.2# cp -R Install\ macOS\ High\ Sierra.app /Volumes/Macintosh\ HD/ -bash-3.2# cp -R /Volumes/DATA/SharedSupport /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app/Contents/  
      ...then start installation with the startosinstall utility...
      -bash-3.2# /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app/Contents/Resources/startosinstall --volume /Volumes/Macintosh\ HD --converttoapfs NO --applicationpath /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app  
      The above steps can be automated with the attached "startosinstall.command" script, which will assemble "Install macOS High Sierra.app" on "Macintosh HD" and launch the startosinstall utility targeting the "Macintosh HD" volume.  Copy/download to "Macintosh HD", then run in terminal (after attaching DATA USB with /Shared Support folder)...
      cd "/Volumes/Macintosh HD" chmod +x startosinstall.command ./startosinstall.command Updated Download Links for macOS Mojave 10.14.4_18E226
      Browse Apple's Regular Software Catalog and find the URLs to download the following 6 installer files...
      BaseSystem.dmg BaseSystem.chunklist InstallInfo.plist InstallESDDmg.pkg AppleDiagnostics.dmg AppleDiagnostics.chunklist  
      Note: In Mojave, Apple has removed the --converttoapfs NO and --applicationpath arguments from the startosinstall utility....
       
      eg to use startosinstall for the above section "What happens if we don't have access to TransMac or Paragon Hard Disk Manager?", the syntax is now
      -bash-3.2# /Volumes/Macintosh\ HD/Install\ macOS\ Mojave.app/Contents/Resources/startosinstall --volume /Volumes/Macintosh\ HD  
      This basically means that for Mojave, the default installation will always convert the target volume to the apfs file system.
       
       
      startosinstall.command.zip
      InstallInfo.plist_edited_10.13.6.zip
       
      InstallInfo.plist_edited_10.14.3.zip
      InstallInfo.plist_edited_10.14.4.zip
    • By Cobie1990
      Hey everyone,
       
      I have a brand new build every part is brand new specs are:
       
      Motherboard: Gigabyte Z390 Designare 
      CPU: I7-9700k(Coffee Lake)
      GPU: Sapphire Pulse Rx 580 4gb
      Ram: 32gb Trident 3000mhz
      PSU: 750W bronze
       
      All parts were checked on QVL list. So they are compatiable. I can install Mojave 10.14.3 without a problem on my 1tb ssd. 
       
      Now the problem is once i boot up after install and log into mac os Mojave system. After like 5 mins it freezes up and just get stuck and i cant do anything. I have to reset my hackintosh and try again but still after 2-5 mins upon boot up it freezes!(Also bios is set correctly)
       
      If anyone has a fix for this, can yall help me out i need Mac os for video production machine but cant get it to stop freezing!
       
      Help plz thanks for all problems in advance!!

       
       

    • By fantomas1
      The macOS Mojave 10.14.4 update adds support for Apple News+, includes bug fixes and improvements, improves the stability and reliability of your Mac, and is recommended for all users.
       
      Apple News+
      Apple News+ is a new subscription service that extends the Apple News experience with hundreds of magazines and top newspapers
      Our editors handpick top articles and magazine issues, and you also get personalized recommendations on the topics most interesting to you
      Automatic downloads make it easy to read magazine issues offline
      Apple News is now available in Canada, with a free experience that includes handpicked Top Stories, a personalized Today feed, and support for both English and French
      Apple News+ is available in the U.S. and in Canada, with dozens of additional Canadian magazines
       
      Safari
      Adds Dark Mode support for websites that support custom color schemes
      Streamlines website login when filling credentials with Password AutoFill
      Allows push notification prompts only after interacting with a website
      Adds a warning when an insecure webpage is loaded
      Removes support for the expired Do Not Track standard to prevent potential use as a fingerprinting variable; Intelligent Tracking Prevention now protects against cross-site tracking by default
      iTunes
      Shows more editorial highlights on a single page in the Browse tab, making it easier to discover new music, playlists, and more in Apple Music
      AirPods
      Adds support for new AirPods (2nd generation)
       
      More
      Supports Air Quality Index in Maps for US, UK and India
      Improves the quality of audio recordings in Messages
      Supports real-time text (RTT) for phone calls made through a nearby iPhone on Mac
      Provides enhanced support for external GPUs in Activity Monitor
      Fixes an App Store issue that may have prevented adoption of the latest versions of Pages, Keynote, Numbers, iMovie, and GarageBand
      Improves the reliability of USB audio devices when used with MacBook Air, MacBook Pro and Mac mini models introduced in 2018
      Corrects the default screen brightness for MacBook Air (Fall 2018)
      Fixes a graphics compatibility issue that may occur on some external displays connected to Mac mini (2018)
      Resolves Wi-Fi connection issues that may occur after upgrading to macOS Mojave
      Fixes an issue where re-adding an Exchange account may cause it to disappear from Internet Accounts
      Fixes an issue where AOL user passwords may be frequently requested in Mail
       
      Update
      Combo
       
       
      View full article
       
    • By fantomas1
      Apple News+
      Apple News+ is a new subscription service that extends the Apple News experience with hundreds of magazines and top newspapers
      Our editors handpick top articles and magazine issues, and you also get personalized recommendations on the topics most interesting to you
      Automatic downloads make it easy to read magazine issues offline
      Apple News is now available in Canada, with a free experience that includes handpicked Top Stories, a personalized Today feed, and support for both English and French
      Apple News+ is available in the U.S. and in Canada, with dozens of additional Canadian magazines
       
      Safari
      Adds Dark Mode support for websites that support custom color schemes
      Streamlines website login when filling credentials with Password AutoFill
      Allows push notification prompts only after interacting with a website
      Adds a warning when an insecure webpage is loaded
      Removes support for the expired Do Not Track standard to prevent potential use as a fingerprinting variable; Intelligent Tracking Prevention now protects against cross-site tracking by default
      iTunes
      Shows more editorial highlights on a single page in the Browse tab, making it easier to discover new music, playlists, and more in Apple Music
      AirPods
      Adds support for new AirPods (2nd generation)
       
      More
      Supports Air Quality Index in Maps for US, UK and India
      Improves the quality of audio recordings in Messages
      Supports real-time text (RTT) for phone calls made through a nearby iPhone on Mac
      Provides enhanced support for external GPUs in Activity Monitor
      Fixes an App Store issue that may have prevented adoption of the latest versions of Pages, Keynote, Numbers, iMovie, and GarageBand
      Improves the reliability of USB audio devices when used with MacBook Air, MacBook Pro and Mac mini models introduced in 2018
      Corrects the default screen brightness for MacBook Air (Fall 2018)
      Fixes a graphics compatibility issue that may occur on some external displays connected to Mac mini (2018)
      Resolves Wi-Fi connection issues that may occur after upgrading to macOS Mojave
      Fixes an issue where re-adding an Exchange account may cause it to disappear from Internet Accounts
      Fixes an issue where AOL user passwords may be frequently requested in Mail
       
      Update
      Combo
       
    • By fantomas1
      macOS Mojave 10.14.4 (18E226)
       
      Update
      Combo
×