Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

4,230 posts in this topic

Recommended Posts

Advertisement
Quote

Hi @MaLd0n, would you like to make a last attempt with my configuration? I'm only interested in the Thunderbolt part that for now works partially :wallbash:
Many people on X299 have managed to succeed, do you think it's possible to enable hotplug on a Z370 chipset?

Hardware: I am using the SMBIOS iMac 18,3 with HSierra 10.13.4.
- Gigabyte Z370 Ultra Gaming
- Gigabyte Alpine Ridge PCIe (very similar to Asrock, in fact has 2 connections Thunderbolt 3 and no USB 3.1)

I have removed all the patches and SSDTs from my system, and currently happens this:
- Devices must be turned on before booting the computer to work properly;
- After sleep, they reconnect correctly and work;
- If I turn them off during sleep, and turn them back on before waking up the computer, they reconnect properly and work;
- If I turn off a device (the last one in the chain), they all disconnect;
- If the computer turns on, I turn off the devices and then turning them back on, sometimes they reconnect (I have to turn them all off, otherwise this does not happen), however they do not work properly and the computer can freeze until I turn them off.

I think the line to get the hotplug is thin, but I do not know what to do.
At this point I think it's a power management problem, so I've done two exports if they can be useful:

Send Me without SSDT and with the devices turned OFF: DOWNLOAD
Send Me without SSDT and with the devices ON: DOWNLOAD

I add the original tables of an iMac 18,3 from this thread (I think they can be useful for the values used by Apple):

DarwinDumper_iMac18,3_Apple_X64_Sierra_16F2073_Edited.zip

iMac 18,3 IOReg: Download

Quote

replace, reboot and extract new SEND_ME, don't change nothing, just replace

CLOVER.zip

Thank you! Here's to you: SEND_ME

On 14/4/2018 at 4:54 PM, MaLd0n said:

i'll check it, need a little time for it

Hi @MaLd0n, any news with my problem? I'm only interested in the Thunderbolt hotplug...

Share this post


Link to post
Share on other sites
15 hours ago, giacomoleopardo said:

Hello MaLd0n,

my configuration:

ASUS Z170i Pro Gaming ITX

Intel Kaby Lake i7 7700

no discrete Graphics

Bios version 3607 (latest)

macOS High Sierra 10.13.4 - fresh install

SMBios iMac 18,1 (the only one that works without discrete graphics on 10.13.4)

Here's my Send me files

https://www13.zippyshare.com/v/FZcSTT6I/file.html

Thank you

g.

try

CLOVER.zip

Share this post


Link to post
Share on other sites

Hi everyone, I am creating my first bootable drive. I did all the steps in the guide but I am not sure wether I did it right or wrong. On this guide it's just mentioned to replace the entire clover folder while on many other guides online there are a plenty more steps to do. Does the clover folder replace all the steps mentioned in other guides?Thanks

Share this post


Link to post
Share on other sites
1 hour ago, loscamos said:

Hi everyone, I am creating my first bootable drive. I did all the steps in the guide but I am not sure wether I did it right or wrong. On this guide it's just mentioned to replace the entire clover folder while on many other guides online there are a plenty more steps to do. Does the clover folder replace all the steps mentioned in other guides?Thanks

Yes

45 minutes ago, fryysyd said:

Moderator, do you set PluginType=1 in DSDT?

How does DSDT change to PluginType=0?


Not in config.plist.

take a test with last config.plist

Share this post


Link to post
Share on other sites
25 minutes ago, blackheatinc said:

Hi MaLd0n,

My configuration is :

Gigabyte GA-Z270X-Gaming 7

Intel Core i7 7700K

64GB DDR4, 1 TB Samsung 960 EVO

nVidia GeForce GTX 1070

Here is the "send me" files

https://1drv.ms/u/s!AkOMbIsL_s0HhjcnS0-01gwn5n0D

Many great thanks

new SEND_ME after reboot

CLOVER.zip

Share this post


Link to post
Share on other sites
20 minutes ago, MaLd0n said:

new SEND_ME after reboot

CLOVER.zip

I have tried and I can't seem to be able to input password in FileVault (nothing happens when I press anything in the keyboard)

Share this post


Link to post
Share on other sites
21 minutes ago, blackheatinc said:

I have added AsAmiShim.efi and ApfsJumpStart.efi into the drivers64UEFI folder and I can now enter the FileVault password and boot into the system. Here is the new "SEND_ME"

https://1drv.ms/u/s!AkOMbIsL_s0HhjiX1ySIEc6_C7Lt

Many great thanks

looks good, let me know if work good

Share this post


Link to post
Share on other sites
31 minutes ago, MaLd0n said:

looks good, let me know if work good

Still running and it works great. Thanks a lot. And by the way, do you know how to enable AirDrop with external USB Bluetooth. I have the ASUS BT-400 4.0 LE (USB 4.0) and TPLink Archer T6E (PCIe) but I can't seem to enable AirDrop and Handsoff. Thanks a lot.

Share this post


Link to post
Share on other sites
10 minutes ago, blackheatinc said:

Still running and it works great. Thanks a lot. And by the way, do you know how to enable AirDrop with external USB Bluetooth. I have the ASUS BT-400 4.0 LE (USB 4.0) and TPLink Archer T6E (PCIe) but I can't seem to enable AirDrop and Handsoff. Thanks a lot.

no idea, but i think in search forum have it ;)

Share this post


Link to post
Share on other sites
On 2018/4/15 at 12:07 AM, MaLd0n said:

put one DGPU and disable IGPU

There is no way to disable iGPU(HD610) in BIOS settings.

So I replaced RADEON HD5450 by GeForce GT710 Kepler (10.13.4 Genuine driver), but could not boot from USB installer....

Geforce9400 can boot and QE/CI is enabled, but it does not support UEFI, so the display-output is enable only after the driver has been loaded.

GeForceGT710Kepler.jpeg

Share this post


Link to post
Share on other sites

Success with HP 27-a257 AIO thanks to MaLdOn I have 10.13.4 installed and running. Sleeps and wakes, all USB ports working , ethernet working, sound ok but mic not working.

Intel wifi, touch screen and card reader not working but thats ok. See my clover file if anybody tries an HP AIO. Cant upload files here so https://www34.zippyshare.com/v/G77EUVwB/file.html

Share this post


Link to post
Share on other sites

MaLd0n, thanks for the DSDT, I'm gonna try it asap!

Meanwhile, would you try to patch this one?

ASUS Rampage V Extreme (latest unlocked bios)

Intel i7 5820k

gigabyte GTX 980 OC 4GB

SSD 850 evo

Asus thunderboltEXII

DeckLink Mini Monitor PciExpress video acquisition card

FireWire card PciExpress

High Sierra 10.13.4 fresh install

Her are proper files. Thanks

https://www1.zippyshare.com/v/aAIEJl8G/file.html

Share this post


Link to post
Share on other sites
5 hours ago, strakm39 said:

Success with HP 27-a257 AIO thanks to MaLdOn I have 10.13.4 installed and running. Sleeps and wakes, all USB ports working , ethernet working, sound ok but mic not working.

Intel wifi, touch screen and card reader not working but thats ok. See my clover file if anybody tries an HP AIO. Cant upload files here so https://www34.zippyshare.com/v/G77EUVwB/file.html

i need a full dump, read first post

Share this post


Link to post
Share on other sites
1 hour ago, giacomoleopardo said:

MaLd0n, thanks for the DSDT, I'm gonna try it asap!

Meanwhile, would you try to patch this one?

ASUS Rampage V Extreme (latest unlocked bios)

Intel i7 5820k

gigabyte GTX 980 OC 4GB

SSD 850 evo

Asus thunderboltEXII

DeckLink Mini Monitor PciExpress video acquisition card

FireWire card PciExpress

High Sierra 10.13.4 fresh install

Her are proper files. Thanks

https://www1.zippyshare.com/v/aAIEJl8G/file.html

CLOVER.zip

Share this post


Link to post
Share on other sites
4 minutes ago, giacomoleopardo said:

I noticed that you have changed a few things in config, kext etc...Should I change everything, or just simply add the. dsdt in patched folder, keeping my old setup??

replace full clover folder

Share this post


Link to post
Share on other sites
18 minutes ago, strakm39 said:

OK MaLdOn here it is. Any help appreciated.

https://www57.zippyshare.com/v/fFk7ZB2X/file.html

intel wifi dont work

touch, i think dont work too

card reader, have a 3 party kext for it, for realtek, but only pci/pcie bus

https://www.insanelymac.com/forum/forums/topic/321080-sineteks-driver-for-realtek-rtsx-sdhc-card-readers/

Share this post


Link to post
Share on other sites
Posted (edited)

Hi mald0n

I have a friend using X550VX

asus notebook i7 -7700hq 

asus touchpad not i2c

GTX950M - Intel UHD630

RTL8723BE Wireless LAN

RTS5287 PCI-E Card Reader

RT8111 PCI-E Gigabit Ethernet NIC

Intel Skylake PCH-H - High Definition Audio Controller / REALTEK 255 i suppose VEN_10EC&DEV_0255

 

 

original DSDT

https://drive.google.com/file/d/14CKSKgDQ_Q5NlzyvOIQMWnVNWcMR5XjE/view

runme

https://drive.google.com/file/d/1XieNseYj_KgaCwdq3gnPxZi_32Jn8vLk/view

his patched dsdt and kext, 

4 configuration config.plist only config.n70.plist worked, others stopped or restart.

http://www.mediafire.com/file/le8y1y...OVERx550vx.zip

 

Status:

battery status power management not worked

trackpad sudden move  gesture not captured, via voodoops2 kext 

jack audio weird with voodoohda kext

brightness via fn not worked via dsdt

numlock not worked via voodoops2 kext

 

Edited by Babiloe

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771     First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generated in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder CLOVER.zip   --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with Skylake patches DSDT.MaLd0n GA H110M-S2.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI --FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771     Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover UEFI in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install Sierra and boot into system!   --Install Clover UEFI and replace with my folder  CLOVER POST INSTALLATION.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!   If you need DSDT edit... Run it RunMe.app   --DSDT My DSDT DSDT.ASUS H61M-A MaLd0n.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -EHCx -LPC -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF Clear NVRAM, Purge and Kextcache
          --FakeSMC http://www.hwsensors.com/releases --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771     --Create a bootable copy of macOS Sierra   http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra   http://diskmakerx.com/   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder    CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder   CLOVER.zip   --Nvidia WebDriver Sierra   http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/   --Nvidia WebDriver High Sierra   http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/   --Cuda   http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   Now you need a fine tune!   --DSDT DSDT.GA H97M-D3H MaLd0n.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF --Power Management   Use "plugin-type"=1 in DSDT, SSDT or Clover config.plist   --Brightness   Install .app, select the required permission and reboot. Work in F1 / F2 keys! NativeDisplayBrightness.app.zip https://github.com/Bensge/NativeDisplayBrightness/releases *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install  
      --FakeSMC
        https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads/   --Audio   https://github.com/vit9696/AppleALC   --USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   --LAN   http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover in USB stick UEFI mode https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install System and boot with USB STICK! --Install Clover in UEFI mode and replace with my folder  Mavericks / Yosemite CLOVER Mavericks-Yosemite.zip El Capitan / Sierra CLOVER El Capitan-Sierra.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches! If you need DSDT edit... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generate in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609    --DSDT My DSDT DSDT.Asus Z97M-PLUS.zip   Patches  -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -HDMI -ALS0 -SHUTDOWN -LAN -PNLF --SSDT Generate your SSDT Power Management, use ssdtPRGen Piker-Alpha https://github.com/Piker-Alpha run in terminal curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh chmod +x ~/ssdtPRGen.sh sudo ~/ssdtPRGen.sh ssdtPRGen.command.zip
       
      --SSDT i74790K
      SSDT.i7 4790K.zip
       
      --IOREG
      iMac.ioreg.zip
       
      Clear NVRAM, Purge and Kextcache Olarila.command.zip   stock coolerand Rio 40º    --FakeSMC http://www.hwsensors.com/releases --Audio http://www.insanelymac.com/forum/topic/314406-voodoohda-289/ --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771     --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   -Replace Folder CLOVER Install.zip   -Install Sierra/High Sierra and boot into system!   -Install Clover and replace with my folder  CLOVER Post Install.zip   -Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!   If you need DSDT edits for Skylake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer IORegistryExplorer.app.zip -Run it, post files generate in your desktop RunMe.app.zip   -DSDT bios F21 My DSDT with patches for skylake DSDT.GA Z170M-D3H F21.zip   -Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -MIKEY -BLC0 -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI






       
      -FakeSMC http://www.hwsensors.com/releases -Audio https://github.com/vit9696/AppleALC -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads -LAN https://github.com/Mieze/IntelMausiEthernet   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
×