Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

4,890 posts in this topic

Recommended Posts

12 minutes ago, Hackmac101 said:

Panic picture + files

https://nofile.io/f/Xo0pDY2E8ht/CLOVER.IOREG.Runne.zip

E411CA60-1AE9-402E-9CB4-E20ED95F28A0.jpg

 

Mobo: GA-170m-ds3h

SMBIO: iMac 17,1

 

Fix Airport in Clover cause panic, but AirportBrmFixup needs it. What is  AirportBrmFixup.kext different from FakePCIID + FakePCIID_Broadcom.kext to get wifi?

avoid use beta kexts, use release

Share this post


Link to post
Share on other sites
Advertisement
26 minutes ago, MaLd0n said:

avoid use beta kexts, use release

I changed all kext to release version doesn't fix it. Clover generated a bad ACPI

Share this post


Link to post
Share on other sites
1 hour ago, liemhatang said:

I use it, but not work. 

the kext support ur lan model?

46 minutes ago, Hackmac101 said:

I changed all kext to release version doesn't fix it. Clover generated a bad ACPI

run my app and send me full dump, i need a full dump

RunMe.app.zip

Share this post


Link to post
Share on other sites

The app has problem when dumping IOREG, 10.13.4 is my OS version:

IOREG dump failed. Retrying
Increased delay x2 for IOREG dump. This will take a while...(33 sec)

Edited by Hackmac101

Share this post


Link to post
Share on other sites
3 minutes ago, Hackmac101 said:

The app has problem when dumping IOREG, 10.13.4 is my OS version:

IOREG dump failed. Retrying
Increased delay x2 for IOREG dump. This will take a while...(33 sec)

u need wait finish without open apps or windows, just run , password and wait finish

Share this post


Link to post
Share on other sites
7 minutes ago, Hackmac101 said:

https://nofile.io/f/3OjQGRAq0BA/Send+me+Hackintosh.zip

Replace with your Clover, then updated to v4424, added apfs.efi and AptioMemFix.efi so I can boot.

looks good, u need test all usb ports with usb3 device

Dont need ssdt USB, use flag

check

Example

Unused Ports, excluded with flag
uia_exclude=HS01;HS02;HS05;HS06;HS07;HS13;HS14;SS03;SS04;SS05;SS06;SS09;SS10;USR1;USR2

test sleep

Share this post


Link to post
Share on other sites

Thank you, MaLd0n, works good.

I am able to boot with Airport Fix checked in Clover, with SSDT you added, without it I can't.

Can you tell me why?

 

Thank you for your time for helping me.

Share this post


Link to post
Share on other sites
8 minutes ago, Hackmac101 said:

Thank you, MaLd0n, works good.

I am able to boot with Airport Fix checked in Clover, with SSDT you added, without it I can't.

Can you tell me why?

 

Thank you for your time for helping me.

i rape DSDT remove many k lines, unused devices, etc

u dont need airport fix in clover

 

Share this post


Link to post
Share on other sites

Hi Master MaLd0n, i follow your guide and the guide of Glassdood's  with z370-g and i7 8700 

resume of setup

asus rog strix z370-g BIOS Ver. 0430 and i want to use your dsdt that you made.

i7 8700K 3,7 

64 GB RAM Crucial Ballistic 2400Mhz (patching in clover for full recognise)

Nvida GTX 1060 6GB

Nvme Samsung 960 250GB

SSD Crucuial mx500 500gb

 

And i could install without problems.

but i have a question or problem:

I use Noctua Ds15 cooler which is very large and does not let me put the graphics card in the first slot pcie. I put it in the one below. But it reports 8x. I have read that the plate supports 2x 16. Do you know if it is ok and according to the use you need, increase the number of lines?

 

 

do you think you could do the dsdt and adjustments that you do to see if I conquer more performance besides avoiding kexts and patches?

and why you dont want hardware sensors? it seems that is very difficukt to get it via dsdt, can you guide me pls?

this is my sendme.zip

https://drive.google.com/open?id=1pa-Nn5SfcDFRHbLTu9p0ZtbwkXEWguoN

 

 

I reiterate my gratitude and I have been with my colleagues that when we make the machine work we will make a donation, as a thank you for the effort you make for the community¡¡

Screen Shot 2018-04-04 at 12.37.59.png

Screen Shot 2018-04-04 at 12.45.57.png

Screen Shot 2018-04-04 at 12.51.18.png

Screen Shot 2018-04-04 at 12.54.41.png

Share this post


Link to post
Share on other sites
10 minutes ago, multiymedia said:

Hi Master MaLd0n, i follow your guide and the guide of Glassdood's  with z370-g and i7 8700 

resume of setup

asus rog strix z370-g BIOS Ver. 0430 and i want to use your dsdt that you made.

i7 8700K 3,7 

64 GB RAM Crucial Ballistic 2400Mhz (patching in clover for full recognise)

Nvida GTX 1060 6GB

Nvme Samsung 960 250GB

SSD Crucuial mx500 500gb

 

And i could install without problems.

but i have a question or problem:

I use Noctua Ds15 cooler which is very large and does not let me put the graphics card in the first slot pcie. I put it in the one below. But it reports 8x. I have read that the plate supports 2x 16. Do you know if it is ok and according to the use you need, increase the number of lines?

 

 

do you think you could do the dsdt and adjustments that you do to see if I conquer more performance besides avoiding kexts and patches?

and why you dont want hardware sensors? it seems that is very difficukt to get it via dsdt, can you guide me pls?

this is my sendme.zip

https://drive.google.com/open?id=1pa-Nn5SfcDFRHbLTu9p0ZtbwkXEWguoN

 

 

I reiterate my gratitude and I have been with my colleagues that when we make the machine work we will make a donation, as a thank you for the effort you make for the community¡¡

Screen Shot 2018-04-04 at 12.37.59.png

Screen Shot 2018-04-04 at 12.45.57.png

Screen Shot 2018-04-04 at 12.51.18.png

Screen Shot 2018-04-04 at 12.54.41.png

If i try to use the dsdt of your guide i get a forbidden symbol while boot.¿??¿?¿

Share this post


Link to post
Share on other sites
28 minutes ago, multiymedia said:

If i try to use the dsdt of your guide i get a forbidden symbol while boot.¿??¿?¿

replace full clover folder, reboot and send me new dumps

CLOVER.zip

Share this post


Link to post
Share on other sites

 

Do I need to update clover bootloader? I have version 4359

and the bios?

12 minutes ago, MaLd0n said:

replace full clover folder, reboot and send me new dumps

CLOVER.zip

 

Share this post


Link to post
Share on other sites

your magic works

now all pci shows in system profile 

now i need to find the way to enable audio by the hdmi or displayport of the gtx 1060

and the laggy nvidia driver, what is the best method to solve? as there are many scripts available.

thank you so much.

 

Share this post


Link to post
Share on other sites
3 minutes ago, multiymedia said:

your magic works

now all pci shows in system profile 

now i need to find the way to enable audio by the hdmi or displayport of the gtx 1060

and the laggy nvidia driver, what is the best method to solve? as there are many scripts available.

thank you so much.

 

 

I forgot ¿what I do with the express pcie for gtx1060?. the system profile says it is 8x. is connected in the second pci because the heatsink (noctua ds15) will not let me place it in the top one. should change in bios somtehing or is ok?

Share this post


Link to post
Share on other sites
2 hours ago, MaLd0n said:

replace full clover folder, reboot and send me new dumps

CLOVER.zip

Nvidia partially solved. with webdriver.sh downgrade the webdriver to 106, and no lagg in safari o chrome.

for now.

i keep tuning. thnks

Share this post


Link to post
Share on other sites

Hi, Maldon.  I hope you can help me.

I have an 8700k on a Gigabyte Gaming 5 that is running 10.13.3 just fine.

When I tried to upgrade to 10.13.4 on two separate occasions with two separate disks, I got the HID Legacy Shim 2 (and then the Still Waiting for Root Device, which quickly blurs out).  I removed my nVidia drivers just to be safe, so when it booted, it booted to the default Mac OS graphics driver, then I upgraded.  The upgrade seemed to work, until it did what I thought was the final boot, but on both HDs, it dies at "HID Legacy Shim 2" and then the "still waiting...".

Any thoughts?

I wanted to attach my Clover directory, but it's too big.  Here is my config.plist and screenshots of my EFI/Clover/Kexts/Other and my drivers64eufi.

config.plist

Dirvers64eufi.png

Screen Shot 2018-04-04 at 12.59.21 PM.png

Share this post


Link to post
Share on other sites
6 hours ago, multiymedia said:

 

I forgot ¿what I do with the express pcie for gtx1060?. the system profile says it is 8x. is connected in the second pci because the heatsink (noctua ds15) will not let me place it in the top one. should change in bios somtehing or is ok?

if mobo dont have 2 slot 16x, use first slot, ever

5 hours ago, telepati said:

@MaLd0n I have slow boot problem could you please check my files?

 

Send me Murats-Mac.zip

u need a usb port limit, use all drivers sent before, kext, etc, is just a essentials drivers and kext and have any problem

5 hours ago, multiymedia said:

Nvidia partially solved. with webdriver.sh downgrade the webdriver to 106, and no lagg in safari o chrome.

for now.

i keep tuning. thnks

nvidia-update.command.zip

Share this post


Link to post
Share on other sites
1 hour ago, meaganmargaret said:

Hi, Maldon.  I hope you can help me.

I have an 8700k on a Gigabyte Gaming 5 that is running 10.13.3 just fine.

When I tried to upgrade to 10.13.4 on two separate occasions with two separate disks, I got the HID Legacy Shim 2 (and then the Still Waiting for Root Device, which quickly blurs out).  I removed my nVidia drivers just to be safe, so when it booted, it booted to the default Mac OS graphics driver, then I upgraded.  The upgrade seemed to work, until it did what I thought was the final boot, but on both HDs, it dies at "HID Legacy Shim 2" and then the "still waiting...".

Any thoughts?

I wanted to attach my Clover directory, but it's too big.  Here is my config.plist and screenshots of my EFI/Clover/Kexts/Other and my drivers64eufi.

config.plist

Dirvers64eufi.png

Screen Shot 2018-04-04 at 12.59.21 PM.png

FILES.zip

Share this post


Link to post
Share on other sites
1 hour ago, MaLd0n said:

u need a usb port limit, use all drivers sent before, kext, etc, is just a essentials drivers and kext and have any problem

But I using all drivers you send before. I check the earlier post and I try to download but can't. I thinks files are deleted.

Here is the new files;

Send me Murats-Mac.zip

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By glasgood
      CLOVER DUAL BOOT MOJAVE & WINDOWS 10 GUIDE 
       

       
       
      INCLUDES  MBR / LEGACY BIOS  TO  GPT / EFI CONVERSION
      USING MBR2GPT TOOL
       
       
      PREREQUISITE: Two physical discs ( SSD’s or HDD’s )
       
       
       
       
       
      STEP 1 - Clover dual boot configuration 
       
      Open config.plist with Clover Configurator
       
      Boot
       Legacy = PBR Timeout = True ( will remove the Timeout countdown, from Clover boot menu)  

       
      GUI 
      Scan / Custom
       Entries = True  Tool = True  Legacy = False ( removes extra Windows 10 entries )  
      Hide Volume
      - Preboot ( macOS Preboot )
      - Recovery ( macOS Recovery )
       

       
      So at boot you will have two options: boot macOS Mojave or Windows 10 
       
       
       
       
       
       
       
      ————————————————————
       
       
      STEP 2 - Using a drive without Windows 10 installed
       
      Disconnect system drive that contains your macOS Mojave install from computer ( This is so that Windows does not overwrite existing macOS Mojave boot loader )
       
      Proceed with a Windows 10 UEFI install.  
      After installation reconnect macOS Mojave Drive, the Windows installation should now be detected and usable in Clover. 
      If Windows 10 is not detected or able to boot,  then verify you installed Windows 10 as UEFI and not MBR ---->  ( Read step 2 - For a drive with Windows 10 installed )
       
       
      OR
       
       
       
      STEP 2 - Using a drive with Windows 10 already installed
       
      Verify your Windows install is  GPT / UEFI or MBR / Legacy BIOS.   
      If Windows install is GPT UEFI then Windows 10 install is ready to use at Clover boot menu, you should be able to boot into Windows directly from Clover boot screen. 
       

       
       
      But if  Windows drive is detected at Clover boot screen, but when booting Windows you get a black screen with a cursor on the top left,
      then this is most likely because Windows drive is MBR ( Legacy BIOS ).  You can easily convert MBR to GPT using  Windows MBR2GPT tool ( this saves hours work having to reinstall Windows 10 and setting up all your applications again  ) 
       
      If Windows 10 install is MBR / Legacy BIOS  then simply convert to GPT / UEFI  following instructions below ( read video summary and view video )
       
       
      ** To use Windows 10  MBR2GPT tool  you must have Windows 10 version 1703 ( creators update  ) or later and less than 3 partitions on 
      the Windows 10 drive **
       
      Video summary:
       
      Confirm Windows 10 drive is MBR Legacy BIOS ( in Windows Disk Management ) Reboot into Windows PE ( Advanced Startup ) Convert from MBR Legacy BIOS to GPT UEFI ( using commands below ) mbr2gpt /validate mbr2gpt /convert Restart Verify Windows 10 drive has changed to GPT UEFI ( in Windows Disk Management )  
       
       
       
      After conversion Windows 10 is ready to use at the Clover boot menu 
       
       
    • By SepehrM
      I'm trying to install High Sierra 10.13.3 on an ASUS N552VW laptop, and I get stuck after this message:
      "could not recover SATA HDD after 5 attempts, terminating" 
      And some other warnings afterwards.
      Specs:
      CPU: Intel Skylake 6700HQ 2.6GHz
      RAM: 16GB DDR4
      2TB HDD + 128GB SSD
      GPU: Intel HD Graphics 530 + Nvidia GTX960m
      I'm installing using a 16GB USB3 flash drive on one of HDD volumes (UEFI Mode)
       
      I uploaded the verbose log and clover config.plist
      config-new.plist

    • By gk12345
      hello to everyone, i managed to install mojave on my asus ux303ub with i5 cpu and now sleep does not work when i press sleep display turns black and pc stays on and then i have to force shut down by holding power button in order to restart pc ,by the way i used the clover folder from a guide on the internet, any help would be appreciated, thanks
    • By Bahaa
      Need help here
      My graphic card is detached 7mb
      and I try a lot of solution and no one work 
      can any one help
       

    • By Gracie
      Hello, insanely kind people! 
      I had full working Speedstep on my system with El Capitan, but after installing Mojave i cant make it working again!
      Help me please. Actually system is working only with NullCPUPowerManagement.kext. As soon as i remove it from Extensions directory i've got kernel panic at the boot.
      I tried to put SSDT.aml from my previous ElCapitan clover, tried to make new by different utilities, but still no luck.

      My system is:
      Pentium G3258
      Asus Z97-K USB 3.1
      Nvidia GTX 670


      i''m attaching my new clover.plist of Mojave and old El Capitan one, which makes Speedstep fully working and overclocking my little Pentium from 3.2 to 4.5GHz. Now i see huge speed loss without SpeedStep on Mojave  Please help, anybody! Also im attaching my working SSDT.aml from El Capitan.
      El Capitan SSDT.aml
      El Capitan config.plist
      Mojave config.plist
×