Jump to content
  1. MaLd0n

    MaLd0n

  • Similar Content

    • By crazybirdy
      Patched OSInstaller.framework to allow macOS 10.14 installation on MBR HFS+J partition.
       
      To use those patched files you must follow HowTo-10.14.x to create an USB installer. You can't just run the app downloaded from Mac App Store.
       
      The patch is made base on 落下爱@pcbeta 10.10.x MBR patch method, and more patch for 10.14 Firmware check by crazybirdy.
       
      What is this patched OSInstaller doing?
      1. Patch the MBR check, allow macOS 10.14 installation on MBR partition.
      2. Patch the Firmware check, bypass the error of "An error occurred while verifying firmware".
      3. Patch to stop auto-convert to APFS , "ConvertToAPFS=false" is no longer worked with 10.14.
      4. This patched MBR OSInstaller will never convert to APFS, and will always install as HFS+J partition.
      5. This patched MBR OSInstaller method works with both MBR HFS+J and GPT HFS+J partition (GPT+recovery).

      No longer need to set new SMbiosversion, FirmwareFeatures, and FirmwareFeaturesMask with this MBR-patch.
       
      How to make 10.14 installer for MBR?
      Read HowTo-10.14.x.txt inside the zip file first, same as 10.13, different with 10.12.
      Read HowTo Q/A Q7. How to install in different computer with only one USB partition?
       
      Just use 14MBRinstallerMaker to make installer, it works with both MBR and GPT.
       
      And, need a SMBIOS supported with /System/Library/CoreServices/PlatformSupport.plist.
    • By Mario1964
      Hello guys,
      Today i installed the beta on my external SSD ( cause i don't have more space in the case)
      i tried in this way:

      and also using this:

      All goes right but, when i 1st boot the hdd it appears as this:
      (the photo was just old , i'm using the new clover)

      and he stuck at apple logo.
      This are the setting i use to make the usb boot:

      what can i do ?
       
      thx
       
       
    • By fantomas1
      First beta... macOS 10.14 Mojave beta (18A293u)
       
      Useful information:
       
      macOSDeveloperBetaAccessUtility (thanks to gengik84) or direct link from Apple's server nonSupportedModels (thanks to mitch_de) Original apfs Patched apfs (patch is the same credits PMheart and ErmaC) Clover r4515 (thanks to gengik84) USB port limit patch (thanks to PMHeart) "MinStolenPatch" for KabyLake Platform Notebook (thanks to Austere.J)
    • By PingoLinkin
      Motherboard: ASUS / X99 Deluxe II
      Chipset: Intel® X99
      Processador: i7-6800 LGA2011 v3
      Memoria: HyperX - DDR4 24000MHz - 32GB(2x16gb)
      Rede: Intel® I218V, 1 x Gigabit LAN; Intel® I211-AT, 1 x Gigabit LAN LAN; Dual Gigabit LAN controllers- 802.3az Energy Efficient Ethernet (EEE) appliance
      Audio: Realtek® ALC1150 com 8 canais
      Video: Geforce GTX 750 Ti 2GB SC DDR5 128 bits PCI-E 3.0 (1x DVI, 1x DisplayPort, 1x HDMI)
      Keyboard: Apple Aluminium
      Mouse: Microsoft
      HD: SAMSUNG SSD 840 EVO 1TB
       
      ///////////////////////////////////////////
       

       
      1 - Preparando PENBOOT:
        1.1 - Baixe a imagem do Sierra e deixe na pasta "Applications";
        1.2 - Formate o PenDrive e altere o nome para: "MyVolume";
        1.3 - Abra o Terminal e digite a seguinte linha de código, dê enter e quando solicitado digite sua senha. Aguarde o término da instalação, geralmente demora em torno de 20min:
      sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ macOS\ Sierra.app  
       
      1.4 - Baixe a última versão do Clover EFI bootloader: Download
        1.5 - Abra o Clover, na última etapa, clique em Customize, depois marque a opção "Install for UEFI booting only", como na imagem abaixo:

       
        1.6 - Provavelmente a partição "EFI" estará montada, abra a partição e substitua a pasta "CLOVER" por esta CLOVER Asus X99 Deluxe II - Sierra.zip.
       
      2 - Configurando BIOS
        2.1 - Atualize sua BIOS para a versão mais recente, a minha é: 1902
        2.2 - Reset as configurações de sua BIOS em: Exit/Load Optimized Defaults;
        2.3 - Vá para: Boot/CMS (Compatibility Support Module)/Launch CMS: ENABLED;
        2.4 - Vá para: Boot/Secure Boot/OS Type: Other OS;
       
      3 - Instalando OS
        3.1 - Ligue o computador com o Pendrive espetado, ele automaticamente irá iniciar o Clover, caso isso não aconteça, na tela inicial da ASUS, pressione F8 para escolher o pendrive como boot primário;
        3.2 - Em algum momento futuro, seu clover pode não arrancar corretamente, caso isso aconteça, na tela inicial do CLOVER pressione F11 para limpar o NVRAM, ele irá reiniciar a máquina automaticamente, em seguida voltará a arrancar normalmente;
       
      4 - PÓS-INSTALAÇÃO
        4.1 - Inicie seu MAC temporariamente pelo Pendrive como boot primário;
        4.2 - Instale o clover seguindo as etapas 1.4, 1.5 e 1.6 . Apenas não esqueça de alterar o destino para o HD Interno com a instalação do Sierra.
        4.3 - Feito isso, reinicie seu mac, agora sem o pendrive;
       
      5 - VÍDEO
        5.1 - Na pasta CLOVER que anexei acima, já possui as kexts NvidiaGraphicsFixup.kext e Lilu.kext ;
        5.2 - Baixe e instale o nVidia Web Driver(Download) de acordo com a versão do seu OS;
        5.3 - A minha versão, por exemplo, é: "macOS 10.12.6 (16G1408)";
        5.4 - Veja abaixo onde encontrar sua versão:

       
      Obs.: Existe um bug no vídeo, caso queira utilizar a entrada DVI, é preciso iniciar a máquina já com o cabo plugado, caso contrário ele deixará sua tela preta e não voltará mais ao normal até que reinicie a máquina.
       
        5.5 - INSTALANDO O CUDA:
           1 - A última versão não funcionou, então baixei a penúltima e funcionou perfeitamente. A versão instalada foi: CUDA 387.178 driver for MAC.

       
       
      6 - ÁUDIO
        6.1 - Baixe o Voodoo HDA 2.9.0 Clover (Download)
        6.2 - Siga as etapas das imagens que estão dentro do anexo;
       
       
      Não solucionado:
      Não consigo habilitar a placa ThunderboltEX 3;
       
       
      Valeu.
    • By moman2000
      Hi,
       
      I thought it would be nice that I would be the first here to give my experience with getting Mojave running and mostly working on my system.
       
      My specifications are as follows:
       
      iMac 14,2
       
      GIGABYTE GA-Z97X-UD5H / Intel Core i7-4770k @ 4.4GHz / 16GB Corsair Vengeance DDR3 @ 1600MHz
      MSI AMD Radeon HD 7870 2GB OC
      250GB SanDisk Ultra 3D NAND SSD / 120GB OCZ Agility 3 SSD
      1TB 5.4K HDD
       
      I used the config that @MaLd0n helped me with. Seriously, he is a legend. HERE is my Clover Config including everything I use for 10.13 High Sierra and 10.14 Mojave.
       
      Installation Procedure:
       
       
      Create bootable USB media with createinstallmedia - sudo /Applications/Install\ macOS\ 10.14\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/"Insert Volume Name here"  ***** Remove quotation marks!!! 
       
      **"--Applicationpath" is now depreciated and should not be used when making a 10.14 Mojave USB. I do not know if this will change in upcoming releases.
       
      ** ConvertToAPFS is now depreciated and no longer works when installing 10.14 Mojave beta 1. Using the command "--converttoapfs NO" will not work if you use it with "createinstallmedia".
       
      Editing "minstallconfig.xml" within the "macOS Install Data" folder on the target partition chosen during installation to change "ConvertToAPFS" from "TRUE" to "FALSE" would also not disable APFS conversion.
       
      Installation ran through well, but it did restart just after installation began which seemed to have been caused by a crash, but it seemed like it was normal as this happened twice as I tried installing Mojave earlier and the same thing happened. Rebooting again into the installation on the target drive that was selected before described as "macOS Install"  and named "macOS 10.14" resumed installation.
       
      Everything from then on was easy and smooth. I set-up my iCloud and things as such and was brought to the desktop of macOS 10.14 Mojave!
       
       
      What does work:
       
      Graphics (Acceleration/Metal) // 4K video dropped 0 frames // Picture-in-Picture
      Mouse and Keyboard
      USB 3.0 -  Full 5 GBP/s - Only ports above HDMI Port and front I/O
      USB 3.0 under both Intel and Killer Ethernet ports function with USB 2.0 devices.
      Ethernet (only Intel NIC so far) Both NIC's work, Intel I217-V and Killer E2200
      iMessage
      Sleep and Wake
      Shutdown
      Restart
       
      Update #1:
       
      Temporary Fix: ***I have gotten audio to work after browsing Reddit, I stumbled across this post: https://www.reddit.com/r/hackintosh/comments/8orn7w/mojave_files_needed/e05kkj9/
       
      Update #2:
       
      I have just found a kext for the on-board Killer E2200 NIC after searching with device and vendor ID's on this forum.
      https://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/
       
      Update #3:
       
      Audio is now fully operational with new version 1.2.8 of AppleALC, from here: 
       
      What does NOT work:
       
      USB 3 under Intel I217-V NIC and Killer E2200 NIC Ethernet Ports // Only function with USB 2.0 devices.
      Audio Temporary fix in Update #1 above   Fixed in Update #3
      Killer E2200 NIC Fixed in Update #2 above
       
       
       
      This is the information I have been able to gather thus far whilst using Mojave.
       
      I hope this helps someone in getting Mojave running on their system.
       
      Regards,
      Mohamed
       
       
      CLOVER_moman2000 No SN.zip







×